How to quckly echo part of a phrase twice in 7.2 Pro?

I've got a vocal track of the Christmas carol "Do You Hear What I Hear?
I'd like to be able to echo the 'what I hear' twice, each copy slightly delayed.
I tried making a copy of the track, creating a region for just the 'what I hear' part, and making a copy of that region. After a bit of hyperdraw volume editing, I can almost make it sound right (hard to echo just part of the prase), but this sure is clumsy.
How would an expert do it? Is there a simple way to do this that I'm overlooking?
Thanks!

hi, i'd do similar to BJ.
except:
i'd cut the phrase out (new region), copy this twice to two separate trks underneath the original at the rhythmically desired points.
then i'd balance these so they seem to fade out with each repeat.
next i'd insert a low pass filter on each of the repeat trks.
i would set the lpf for the 1st repeat to ~ 2000cps, and the second to ~ 750cps.
the cut off frequency should be adjusted for the sound in question and to your taste.

Similar Messages

How do I put parts of multiple songs into one song?

I'm trying to make a mix of songs for my friends party and I was wondering how I could put parts of multiple songs together into one soundfile? If iTunes can't do this are their any other softwares that could do this? Thanks, appreciate it.

Prosper,
That is beyond the ability of iTunes, and requires the use of an audio editor.
A free one that many people like is Audacity.
After you do the editing in Audacity, you can export an MP3 and add it in to your iTunes library. The original files remain unchanged.

How can I transfer part of iPhoto files from my hard drive of iMac to free up my hard drive which is 95% full

My IMAC 24" Early 2008, with Hard Drive of 500 is running out of Memory, down to 25 MGHz. Since I have large collection of photographs in my IPhoto, with fair numbers in raw forms, I presume most of the memory is taken by them. I am unable to find weather that is the cause of low memory, and if it is so, how can I transfer part of them into external hard drive to free up the space. Help into yhe matter will be appreciated. Thanks

Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
Now you have two full versions of the Library.
3. On the Internal library, trash the Events you don't want there
Now you have a full copy of the Library on the External and a smaller subset on the Internal
Some Notes:
As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
You can choose which Library to open: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
You can keep the Library on the external updated with new imports using iPhoto Library Manager

How do I copy parts of layers from one AI doc into a new AI doc and keep/create same layer names?

How do I copy PARTS of layers containing many objects from one CS5 AI (v.15.0.2) doc into a new CS5 AI doc and keep/create the same layer names?
To start with, I have one fairly complex AI document with 100 layers, with several hundred items in each layer. For example, one layer named "Stars" contains 400 separate stars (not grouped), another layer named "Crosses" contains 300 separate crosses, and a 3rd layer named "Text" contains 200 separate words (not outlined).
If I select, by marqueeing a section of the image/artboard, some (but not all) of the individual items contained in the several layers, then paste that selection into a new CS5 AI doc, I cannot get them to create new layers of the same name. Instead they go into one general layer (e.g. "Layer 101") as a jumble of discrete, but unorganized objects (no layers or sublayers). In other words, I have lost the 3 main layers from which I selected a bunch of objects.
Checking "Paste Remembers Layers" has no effect on this result. In fact "Paste Remembers Layers" does not remember layers at all. Only if I select ALL the items in the several layers will it paste those layers by those names into the new doc (or create new layers of the same names).
Of course it is a COLOSSAL waste of time copying the ENTIRE document, then pasting the WHOLE thing into the new doc (with layers retained), then deleting the parts I DON'T need, so please don't suggest that as the solution.

No Monica, nothing in Plug-ins other than the standard installed items (extensions, filters, formats, etc.). No 3rd-part clipboard extension on my computer that I'm aware of, either. All frustratingly basic. And my other CS5 Adobe programs appear to work well, at least to the extent that I am familiar with them.
So, from what I can tell of the various comments (thanks to all of you), am I correct in thinking that it seems I can't, in fact, do what all of you can do (that is, copy some objects from some layers in one doc and paste into another doc preserving those same layers by name and organization, and each containing the correct objects from each original layer)?
If so, that solves half my issue - "is it supposed to be possible to do it"; leaving just the other half - "why can't I do it too".
I'll get those screenshots made and posted later just in case I haven't adequately described the issue, or y'all haven't understood it.

How to make only part of a PDF document editable?

I'm looking to see if there is a way to make only part of a PDF document editable. My problem is, I have pieces of collateral that some of our channel partners need to be able to add their logo to and then edit the contact information on them, but we don't want them to be able to change any of the main copy on these documents. The only thing I've been able to come up with as a solution is to create outlines of the text that I don't want editable, but I need the copy to be able to be read by computer systems for disability purposes. Does anyone have any ideas on something I could do for this? Or has anyone dealt with anything like this? Any help would be greatly appreciated!

Hi vward26,
You can use Acrobat to make only part of a PDF document editable.
Kindly refer this FAQ:http://tv.adobe.com/watch/acrobat-x-tips-tricks/how-to-convert-just-part-of-a-pdf-file/
Regards,
Florence

How to put the part of text behind someone a shape or a shape?

I was thinking about something since I've gotten into magazines recently and the design of them. I was wondering how do they put part of the text behind a person on a magazine cover? Or like have have the text look like it's going around a person(like with some parts behind some parts in front of person like a ring of text around a person or a letter "O" encircling someone? I know how to achieve this in photoshop (in a probably non-standard way) but I have no clue how you would achive this in Indesign. I've attached some examples of what I'm talking about.

How are your Photoshop skills? Because you’ll need to them to silhouette the model. I’d probably just add the magazine title there, too.
I guess I've always sort of wondered about this...you can do it in Photoshop, sure. But...should you?
I mean, in Photoshop you split your image into two layers, a foreground layer and a background layer (via whatever mechanisms you like. Magic Wand tool, etc., etc.). And then you add a 3rd layer for the text inbetween those layers.
But if your cover is normally layed out in InDesign, you've got the text in InDesign already. And what if the text is more complicated than just a plain old title.
Do you split your Photoshop file into two seperate files (with transparency) and place them on seperate InDesign layers with the text on an ID layer inbetween?
That seems a bit awkward. Is there a neater solution?
(I suppose what I would really want would be the ability to have ID insert a layer of ID objects inbetween the two layers of the Photoshop file, and we know that's not possible....)
I suppose another approach is to keep 2 layers in the Photoshop file and place the image twice, on top of itself, with different layer visibility options in each one. I'm not sure if this is a Clever Idea or a Stupid Trick That Hurts.
I dunno!

How do I send part of a pdf?

I have the Adobe reader, but not Acrobat. How do I send part of a pdf file that I have to someone else? I tried copying and pasting the excerpt into a Microsoft Word document but when I do this the text prints out blurry. Thanks in advance for any advice!

Copy and paste will work with text, but you can loose formatting.
Graphics will not necessarily go over either.
On a Mac, you can use Reader or Preview and print to pdf the part of the
pdf you want. It won't be the same as the original, but it will be
close. On a PC (and on some Macs) you can fax the pages of interest.
Some fax drivers will allow you to save the Fax as a TIFF and you can
send that via the internet.
You can also, print to paper the pages of interest.
Place paper in an envelope.
Add address and stamp.
Drop in post box.
Mike

How can I extract part of a PDF file and copy it to a new PDF file?

How can I extract part of a PDF file and copy it to another PDF file?

You will need Adobe Acrobat for this.

How to send only part of a sequence to Encore?

Hi
I'm new to CS5.5 and I've been trying to figure out how to send only part of a sequence to Encore from PPro. I see in the Help file that it says this can be done but it doesn't explain how to do this (or I haven't been able to find where it's explained). When I use "send to Encore" with dynamic link it sends the whole sequence even though I've tried marking in/out or marking the section I want with the work area bar. Is it not possible to do this using dynamic link?
Thanks!
Steve

Playing around with this a bit I found another method in addition to the one you described. I found I can mark part of the sequence with the work area bar and then use Export. The Export screen has an option to send the entire sequence or only the part under the work bar. Then I imported it into Encore and since it was exported with final disc settings Encore didn't have to encode it.
But I think I will send in a feature request. Hopefully a lot of other people will also ask for this.
Thanks
Steve

How to send the part of a machinery for Repair

Hi experts,
My scenario is like this,
I am purchasing a machinery called Galvanizing plant. So in my Asset master it is maintained as Galvanizing plant.
But that Galvanizing plant having 1000 number of small small parts in it.(for example)
If i want to send a spare part of a material from this Galvanizing plant, how do i send?
I know if i am sending any part out side the factory for repair work i have to make service PO.
In my case i have not defined the 1000 ancillary parts of the Galvanizing plant any where.
How to define these parts of machinery ? ( it is not FHMI)
Please advice me.
Thanks & Regards
Bala

Dear,
Without creating it as a material or equipment(it need not be an asset), you cannot do logistics transaction.
Create a PM order with control key PM02(external processing) and issue the material to PM repair order. During PM order release, system will create PR for servicing the same.
In above process there will not be any record ofm gate pass and ect as it is a piece of equipment.
One more way is defining it as material and assignment the required component to BOM, then you create a subcontracting PO...you can have the correct data in logistics.
Come back if you need more help

HT4356 How can I airprint part of a web page?

How can I airprint part of a web page using iPad and Safari?

Copy (or cut) the area you want to print, and paste it in to a new document.
Or take a screen shot (by simultaneously holding Shift + Command + 4 keys) of the area you want to print, then print the resulting screen shot file (which appears on your desktop).

How can you delete part of a message not the whole conversation?

How do you delete part of a message from a conversation on the new upgrade? You used to be able to click on the text, ticking it and then hit trash but thats gone. Please help!!

click and hold on the bubble, you will now see "copy/more" select 'more'
you can now choose which bubbles to delete by selecting a check mark next to them and then hit trash can

How can I edit part of a clip

How can I edit part of a clip in iMovie.

First, select the portion of the clip that you would like to edit. Do this by dragging your mouse. A yellow border should be around this portion of the clip.
Next, right-click inside the yellow border and select SPLIT CLIP. Now you have a separate clip that you can apply your edit to.

How do i delete part of a song, ie spoken intro

how do i delete part of a song already in my music library. ie the spoken intro to a song. i want the song but not the spoken intro part.

If you do Get Info for the song - then (in Options tab, I think) amend the Start Time of the track so it's the point where the music starts. iTunes will permanently 'remember' your change.

How can I delete part of my message or forward part of it? I only see an option that allows me to delete the entire message.... Help please

How can I delete part of my message or forward part of it? I only see an option that allows me to delete the entire message.... Help please

hold your finger on the part of the message you want to delete. This will give you the copy and more option. Choose more, and then you will be able to choose the message or messages you want to delete. Once selected you will be able to tap the trash can icon on the bottom of your screen.

How to quckly echo part of a phrase twice in 7.2 Pro?

Similar Messages

Maybe you are looking for