How to query send context of ccBPM in IR?

Calling a Receiver Determination Defined in the Integration Directory
       1.      In the Receiver From field of the properties area of the send step, select Send Context.
       2.      In the Send Context field, specify a character string for the send context.
You can choose the character string yourself. You must specify the send context to be able to send messages from the same message interfaces to different receivers in different send steps.
       3.      Query the send context in a corresponding condition in the receiver determination in the Integration Directory.
My question is, the send context is not a part of the payload of xml, how to query the send context in IR?
Thanks in advance.

Hi YiNing Mao,
   Were you able to solve the problem?
   I am also facing a similar issue where i have to receiver determination with condition ProcessStep = ASNtoAII. ASNtoAII is defined as send context in IR in the BPM.
   What is the right way to give the condition
1. In concerned receiver determination for the receiver service you give this condition
2. when we select the condition do we need to select XPATH node or the other node to give condition ProcessStep in left operand.
3. Do we need to give the send context against ProcessStep as ASNtoAII or 'ASNtoAII' ? The difference between two is one is without quotes other is with quotes.
Looking forward to help from you.
Thanks and regards,
Amit Deshpande

Similar Messages

How to use send context in ccBPM

Hello,
I am trying my first BPM process. I am using the send step while I need to specify the receiver using send context. The value of the send context should be:
The send context is a freely definable string, which you specify in the send step. You query the send context in a condition in the receiver determination in the Integration Directory. You must specify the send context to be able to send messages from the same message interfaces to different receivers in different send steps.
My questions is how to query the send context in condition of the receiver determination (RD). The condition of RD is basically variable operator value, while variable could be field of the payload or context object. I don't see how to query the send context in a RD condition. Can somebody explain it?
Thanks
Jayson

Hi Jayson
You must specify the send context to be able to send messages from the same interface to different receivers in different send steps.
Check this
http://help.sap.com/saphelp_nw04/helpdata/en/11/13283fd0ca8443e10000000a114084/content.htm
Thanks
Gaurav

When and how does the message context get removed from the message when we use pass thru send port

Friends,
i have a doubt regarding message context.
Assume i have used XMLRecieve pipeline in the receive side to receive the message so that the message context is created. I.e properties are promoted/written.
now if we use pass thru transmit pipe line at send side, how and when does the message context get removed from the message?? Since pass thru does not have any stages/components, how does the message context removed and sent out a pure message to destination???
i mean what exactly happens here to remove the context??
Ravindar

Thanks for the reply.
"The Context is created by the Adapter, regardless of any Pipeline or Pipeline Component. It has nothing to do with PassThrough vs. XmlReceive, although XmlReceive will write Promoted Properties to the existing Context,
as can any other Component."
yeah yeah, adapter does create some properties in context. You are right, i am aware of it. I just missed to explain it clearly. what i meant is addition of context properties will not happen if pass thru used. Thanks its clear.
"No. The Context already exists on the Message when it comes from the MessageBox and
is equally available to any Component in any Stage. The Context that hits the Pipeline is whatever was last Persisted, either by a Receive Port or Orchestration. It is not created by the XmlAssembler (XmlTransmit)"
You are right , the context already exists on the message while it leaves the receive port, and once it persists
to message box the context and message context gets stored in messages in relative tables.
Now as you said the components get the message from the last persistence, assume i have a send port(with passthru)
subscriber and a orchestration subsrciber for this message.
Orchestration gets the message with context right!!
if the send sendport(with passthru) also gets message along with context, then where is this context removed/demoted
while sending it out?. i guess as per SAAkhlaq said,
here sendport(with passthru) should get a pure message without context as passthru used.
or is it that ultimately send adapter removes the context completely?
or is it something like biztalk run time load the context from database into cache and both orchestration and send port gets pure message, and if needed they use context from cache???
sorry i may be troubling you, but i am confused. i hope i am not creating any nuisance with this
post.
Ravindar

How can we send read mode for a query..?

How can we send read mode for a query..?
thanks in advance
regards

Hi Chaudhary.
I am not sure I understand your question correct?
Do you want to set a query to read only so it can not be changed? If so you should be controlling this with authorizations.
Hope it helps.
BR
Stefan

Synchronous send step from ccBPM

Hello Experts,
I'd like to ask you if you have an idea how to configure synchronous send step from ccBPM. So scenario is quite simple:
1. async start of process
2. sync send to system A
3. continue of process
What I already did is:
I define abstract sync interface everything including names is the same as target sync service interface. Then I define async abstract SI with a name of Request Message type and async abstract SI with a name of Response Message. I of course use Receiver From property set to Send Context...
In monitoring it looks like this: I successfully call sync interface, but the way back???... First of all process does not wait for response but continue with other steps and response doesn't not have service interface, namespace and receivers properties set(service, interface, namespace)...
Does anyone already face this problem or do you know how to send sync message from ccBPM in PI 7.1?
Many Thanks,
Milan

A BPM cannot process further without receiving the response message of the SYnc Send......
In the req and resp tabs of the Sync Step of BPM you have to use the correspoding Container Variables (which you have defined with the ABS Async Req and Resp MIs).
I am having few Sync steps defined in some BPMs on PI7.1 and all are waiting for the response and then only proceeding....if any error then BPM wont progress (rather should not).....below are the settings of my Sync Step:
Mode: Synchronous
Create New Transaction: Unchecked
Synchronous Interface: FileDetails_sync_AI
Request Message: Container variable for Req MI
Response Message: Container variable for Resp MI
Receiver From: Send Context
Regards,
Abhishek.

How do i send the username and password to yahoo web page through url

how do i send the username and password to yahoo web page through url i.e as Query string so that my account in yahoo will open...

If you don't mind using a library, then download and use the Apache HttpClient library. It takes care of all these details for you.

How can we send Error Idocs via mail

Hi,
I have read read through forums and understood that it can be achieved either through workflow or through report using table edidd & edids.
If workflow option is used , does the mail trigger for every error idoc ? How can we send daily error report to user say by EOD containing all error idocs using all possible options.
Regards,
Rachel

Rachel,
I dont think so any direct Report will be available just to get Error IDOCs details. Although you can create a simple report to read the tables. An example is in below link.
http://wiki.scn.sap.com/wiki/display/Snippets/Custom+report+for+IDOC+Monitoring
Also, you can create a Query of EDIDC and EDIDS tables to obatin relevant information.
Thanks,
Ravi

Regarding send step in bpm--"send context"

i want to use the send step in my bpm with send context.
The send context is a freely definable string, which you specify in the send step. You query the send context in a condition in the receiver determination in the Integration Directory. You must specify the send context to be able to send messages from the same message interfaces to different receivers in different send steps.
but i did n't understand regarding the explanation given above.
could u plz help me out

Hi
When you use Receiver determination step in BPM to get a list of receivers for a send step.
You need to define send context to send messages from the same interface to different receivers in different send steps. As list of receivers is collected using receiver determination.
Now you can use this to set condition(send context) based receiver in ID Receiver determination.
Thanks
Gaurav

How to Hardcode sender JDBC action node as EXECUTE

Hi ,
I have JDBC to File scenario ,please suggest me how to hardcode sender JDBC structure nodes action as "EXECUTE" and table as "ST_PROS.Get_Table" while designing the message mapping.

Raju,
In the ase of sendrer JDBC adapters you need to provide the SQL Query in the adapter.
Also, the document name and document namespace will be the values for the Message Type Name and MessageTypeNamespace.
The Messagetype youcreate will have to be of this format,
<MESSAGETYPENAME>
<row> 0 to unbounded
<ColumnName1> </ColumnName1>
<ColumnName2> </ColumnName2>
</row
</MESSAGETYPENAME>
if your select query is
Select name,empno from emptable;
the datatype will be,
<MESSAGETYPENAME>
<row> 0 to unbounded
<name> </name>
<empno> </empno>
</row
</MESSAGETYPENAME>
Regards
Bhavesh

How can I send files by FTP with Oracle Portal?

I want to send some file by FTP.
How can I send files by FTP with Oracle Portal?
Any ideas?

Enrique,
Are you trying to transfer more content from remote locations to expose as items within a portal page? By itself, the Oracle Portal runs within the context of the database so I'm not sure how FTP at the OS level will help. However, if you're attempting to transfer files from a remote PC to upload within the Portal, here are a couple of suggestions.
Option 1:
A. Create a portal page.
B. Convert a region to Items.
C. When you're challenged to upload a file from the local OS, ensure you've a drive mapped to your remote location and pick the file to upload into the Oracle9iAS Portal.
Option 2:
Alternatively, the Oracle9iAS Portal 9.0.2 supports the WebDAV protocol(Web-based Distributed Authoring and Versioning Protocol) allowing endusers with a WebDAV client to upload content into the Portal seamlessly from their desktop.
Pls. check out:
http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/PUBLISH_CONTMGMT/TECHNOTE_WEBDAV.HTML
Hope that helps!
Thanks,
Sudi Narasimhan
Oracle9iASPortal Partner Management/Development
I want to send some file by FTP.
How can I send files by FTP with Oracle Portal?
Any ideas?

HOW CAN I SEND FIELD SYMBOL TO SUBROUTINE

HAI,
 HOW CAN I SEND FIELD SYMBOL TO SUBROUTINE
 HOW CAN I COME BACK FROM 5TH INTERACTIVE REROT TO 2ND
INTERACTIVE REPORT.
THANK YOU.
ASHOK

Hi
Write some code in the program to come to 2nd list from 5th list
if sy-lsind = 5.
 sy-lsind = 2.
endif.
for field symbols see the doc
Field Symbols
Field symbols are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
Field symbols are similar to dereferenced pointers in C (that is, pointers to which the content operator * is applied). However, the only real equivalent of pointers in ABAP, that is, variables that contain a memory address (reference) and that can be used without the contents operator, are reference variables in ABAP Objects.
All operations programmed with field symbols are applied to the field assigned to it. For example, a MOVE statement between two field symbols moves the contents of the field assigned to the first field symbol to the field assigned to the second field symbol. The field symbols themselves point to the same fields after the MOVE statement as they did before.
You can create field symbols either without or with type specifications. If you do not specify a type, the field symbol inherits all of the technical attributes of the field assigned to it. If you do specify a type, the system checks the compatibility of the field symbol and the field you are assigning to it during the ASSIGN statement.
Field symbols provide greater flexibility when you address data objects:
If you want to process sections of fields, you can specify the offset and length of the field dynamically.
You can assign one field symbol to another, which allows you to address parts of fields.
Assignments to field symbols may extend beyond field boundaries. This allows you to address regular sequences of fields in memory efficiently.
You can also force a field symbol to take different technical attributes from those of the field assigned to it.
The flexibility of field symbols provides elegant solutions to certain problems. On the other hand, it does mean that errors can easily occur. Since fields are not assigned to field symbols until runtime, the effectiveness of syntax and security checks is very limited for operations involving field symbols. This can lead to runtime errors or incorrect data assignments.
While runtime errors indicate an obvious problem, incorrect data assignments are dangerous because they can be very difficult to detect. For this reason, you should only use field symbols if you cannot achieve the same result using other ABAP statements.
For example, you may want to process part of a string where the offset and length depend on the contents of the field. You could use field symbols in this case. However, since the MOVE statement also supports variable offset and length specifications, you should use it instead. The MOVE statement (with your own auxiliary variables if required) is much safer than using field symbols, since it cannot address memory beyond the boundary of a field. However, field symbols may improve performance in some cases.
check the below links u will get the answers for your questions
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3860358411d1829f0000e829fbfe/content.htm
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/field_sy.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci920484,00.html
Syntax Diagram
FIELD-SYMBOLS
Basic form
FIELD-SYMBOLS <fs>.
Extras:
1. ... TYPE type
2. ... TYPE REF TO cif
3. ... TYPE REF TO DATA
4. ... TYPE LINE OF type
5. ... LIKE s
6. ... LIKE LINE OF s
7. ... TYPE tabkind
8. ... STRUCTURE s DEFAULT wa
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Untyped Field Symbols ad Cannot Use Field Symbols as Components of Classes.
Effect
This statement declares a symbolic field called <fs>. At runtime, you can assign a concrete field to the field symbol using ASSIGN. All operations performed with the field symbol then directly affect the field assigned to it.
You can only use one of the additions.
Example
Output aircraft type from the table SFLIGHT using a field symbol:
FIELD-SYMBOLS <PT> TYPE ANY.
DATA SFLIGHT_WA TYPE SFLIGHT.
ASSIGN SFLIGHT_WA-PLANETYPE TO <PT>.
WRITE <PT>.
Addition 1
... TYPE type
Addition 2
... TYPE REF TO cif
Addition 3
... TYPE REF TO DATA
Addition 4
... TYPE LINE OF type
Addition 5
... LIKE s
Addition 6
... LIKE LINE OF s
Addition 7
... TYPE tabkind
Effect
You can define the type of the field symbol using additions 2 to 7 (just as you can for FORM parameters (compare Defining the Type of Subroutine Parameters). When you use the ASSIGN statement, the system carries out the same type checks as for USING parameters of FORMs.
This addition is not allowed in an ABAP Objects context. See Cannot Use Obsolete Casting for FIELD SYMBOLS.
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. See Defining Types Using STRUCTURE.
Effect
Assigns any (internal) field string or structure to the field symbol from the ABAP Dictionary (s). All fields of the structure can be addressed by name: <fs>-fieldname. The structured field symbol points initially to the work area wa specified after DEFAULT.
The work area wa must be at least as long as the structure s. If s contains fields of the type I or F, wa should have the structure s or at least begin in that way, since otherwise alignment problems may occur.
Example
Address components of the flight bookings table SBOOK using a field symbol:
DATA SBOOK_WA LIKE SBOOK.
FIELD-SYMBOLS <SB> STRUCTURE SBOOK
DEFAULT SBOOK_WA.
WRITE: <SB>-BOOKID, <SB>-FLDATE.
Related
ASSIGN, DATA
Additional help
Declaring Field Symbols
Reward points if useful
Regards
Anji

How can I send instructions or keystrokes to an open Adobe reader from another program?

Hi Gurus,
In my previous question I opened the Adobe Reader as a help file.
Now consider the case that my help.pdf file is already open on page 100 but the context sensitive help of the next dialog is on page 50. What can I do if I do not want to close the Adobe Reader and reopen it again?
I suppose that the user has not closed the needed file and opened another one.
How can I force the curson jump up to the input field of the page number, and fill it with "50" and send an [enter] to it? Or how can I send a "Ctrl+F", a sought word and an [enter]?
TIA,
Regards
Ferenc

You can use interapplication communication with DDE messages.
http://livedocs.adobe.com/acrobat_sdk/11/Acrobat11_HTMLHelp/wwhelp/wwhimpl/js/html/wwhelp. htm?&accessible=true

How can we send the smartform output to mail.

Dear Friends,
My query is how can we send the smart form output to mail.
In my company,payslip are given to the employee in printed format.instead of that we need to send payslip in mail.how can i do..plz help me.
[email protected]

The code below demonstrates how to retrieve a spool request and email it as a PDF document. Please note to process a spool request the program can be executed in background or foreground. Because of the additional functionality to allow this to work in both background and foreground it has made it a little more confusing soyou might want to start by looking at the background only program. Also see transaction SCOT for SAPConnect administration.
*& Report ZSPOOLTOPDF2 *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program can be run in background or online and a spool request *
*& will still be created *
REPORT zspooltopdf2.
PARAMETER: p_email1 LIKE somlreci1-receiver
 DEFAULT '[email protected]',
 p_sender LIKE somlreci1-receiver
 DEFAULT '[email protected]',
 p_delspl AS CHECKBOX,
 p_online no-display.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
 INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
 wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
 gd_eventparm LIKE tbtcm-eventparm,
 gd_external_program_active LIKE tbtcm-xpgactive,
 gd_jobcount LIKE tbtcm-jobcount,
 gd_jobname LIKE tbtcm-jobname,
 gd_stepcount LIKE tbtcm-stepcount,
 gd_error TYPE sy-subrc,
 gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i,
 w_spool_nr like sy-spono.
 %_print LIKE pri_params.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
 it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 gd_sender_type LIKE soextreci1-adr_typ,
 gd_attachment_desc TYPE so_obj_nam,
 gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
 gd_destination LIKE rlgrap-filename,
 gd_bytecount LIKE tst01-dsize,
 gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
 INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
 c_no(1) TYPE c VALUE ' ',
 c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
If p_online = 'X'.
Processing performed when program calls itself when run online
 gd_spool_nr = sy-spono.
 EXPORT gd_spool_nr TO MEMORY ID 'SPOOLTOPDF'.
 EXIT.
endif.
IF sy-batch EQ 'X'.
 PERFORM get_job_details.
 PERFORM obtain_spool_id.
ELSE.
 gd_spool_nr = sy-spono.
If executed online, it submits a program to perform the write statements
instructing it to create a spool request, this could be another program
which just performs the write statements and then exports sy-spono
to memory. But in this example it calls itself passing X to parameter
p_online, which takes it down an alternative procesing path.
 submit ZSPOOLTOPDF2
 with p_online = 'X'
 to sap-spool
 spool parameters %_print
 archive parameters %_print
 without spool dynpro
 and return.
ENDIF.
Get spool id from program called above
IMPORT gd_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
 PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
 wait up to 5 seconds.
 SUBMIT rsconn01 WITH mode = 'INT'
 WITH output = 'X'
 AND RETURN.
ENDIF.
 FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
 INTO TABLE it_tbtcp
 WHERE jobname = gd_jobname
 AND jobcount = gd_jobcount
 AND stepcount = gd_stepcount
 AND listident <> '0000000000'
 ORDER BY jobname
 jobcount
 stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
 message s004(zdd) with gd_spool_nr.
 gd_spool_nr = wa_tbtcp-listident.
 MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
 MESSAGE s005(zdd).
ENDIF.
ENDFORM.
 FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
 IMPORTING
 eventid = gd_eventid
 eventparm = gd_eventparm
 external_program_active = gd_external_program_active
 jobcount = gd_jobcount
 jobname = gd_jobname
 stepcount = gd_stepcount
 EXCEPTIONS
 no_runtime_info = 1
 OTHERS = 2.
ENDFORM.
 FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
 EXPORTING
 src_spoolid = gd_spool_nr
 no_dialog = c_no
 dst_device = c_device
 IMPORTING
 pdf_bytecount = gd_bytecount
 TABLES
 pdf = it_pdf_output
 EXCEPTIONS
 err_no_abap_spooljob = 1
 err_no_spooljob = 2
 err_no_permission = 3
 err_conv_not_possible = 4
 err_bad_destdevice = 5
 user_cancelled = 6
 err_spoolerror = 7
 err_temseerror = 8
 err_btcjob_open_failed = 9
 err_btcjob_submit_failed = 10
 err_btcjob_close_failed = 11
 OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
 TRANSLATE it_pdf_output USING ' ~'.
 CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
 it_mess_att = gd_buffer.
 APPEND it_mess_att.
 SHIFT gd_buffer LEFT BY 255 PLACES.
 IF gd_buffer IS INITIAL.
 EXIT.
 ENDIF.
ENDDO.
ENDFORM.
 FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
 FORM send_email *
--> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
 gd_sender_type = space.
ELSE.
 gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
 tables it_mess_bod
 it_mess_att
 using p_email
 'Example .xls documnet attachment'
 'PDF'
 gd_attachment_name
 gd_attachment_desc
 p_sender
 gd_sender_type
 changing gd_error
 gd_reciever.
ENDFORM.
 FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
 EXPORTING
 spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
 Send email
FORM send_file_as_email_attachment tables it_message
 it_attach
 using p_email
 p_mtitle
 p_format
 p_filename
 p_attdescription
 p_sender_address
 p_sender_addres_type
 changing p_error
 p_reciever.
DATA: ld_error TYPE sy-subrc,
 ld_reciever TYPE sy-subrc,
 ld_mtitle LIKE sodocchgi1-obj_descr,
 ld_email LIKE somlreci1-receiver,
 ld_format TYPE so_obj_tp ,
 ld_attdescription TYPE so_obj_nam ,
 ld_attfilename TYPE so_obj_des ,
 ld_sender_address LIKE soextreci1-receiver,
 ld_sender_address_type LIKE soextreci1-adr_typ,
 ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
 t_contents like solisti1 occurs 0 with header line,
 t_receivers like somlreci1 occurs 0 with header line,
 t_attachment like solisti1 occurs 0 with header line,
 t_object_header like solisti1 occurs 0 with header line,
 w_cnt type i,
 w_sent_all(1) type c,
 w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
 ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
 EXPORTING
 document_data = w_doc_data
 put_in_outbox = 'X'
 sender_address = ld_sender_address
 sender_address_type = ld_sender_address_type
 commit_work = 'X'
 IMPORTING
 sent_to_all = w_sent_all
 TABLES
 packing_list = t_packing_list
 contents_bin = t_attachment
 contents_txt = it_message
 receivers = t_receivers
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
 ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Regards,
Shakti Barath

How can i send the data from WD to SMARTFROMS to fill it?

Hi All,
how can i send the data from WD to SMARTFROMS to fill it?
Best Regards

Hello
After conferring with a colleague, the following response may help:
The Smart Form doesn't have any special integration in WebDynpro.
Therefore the application should implement it especially.
Steps:
1) Call of Smart Forms in mode GET_OTF
2) Convert OTF to PDF
3) Show the PDF in WD Context Node
Similar topic was discussed here:
Re: Displaying Smartforms in Webdynpro ABAP
Thanks
Kind Regards
Toros Aledjian
Edited by: Toros Aledjian on Nov 29, 2010 8:43 AM

On my iPad2, how do I send a Gmail email to trash?

On my iPad2, how do I send a Gmail email to trash? I do not see an icon for trash, i.e. the usual "trash" can.
Please help me.
Thank you!

What you're looking for would be the "archive" or so called "delete" button. It has an arrow pointing down to a box.
What it actually does is that any mail that is "archived" in the mail app results in an action where the app from the orginal location (i.e. inbox) is transfered to the bin in Gmail which is cleaned up every 30 days.
If you happen to mistakenly archive your mail on your iPad, you can locate this mail in the gmail folder within your mail app, bin, hit the mail to view it. If you wish to transfer it back to your inbox, simply hit the folder icon with a down arrow in it.
Linking back to my first point, I'm saying its a so-called delete because in fact, a delete (the word in your context) action that puts the mail into the bin for 30 days before it is really deleted. But its just an archive.
Does it help?

How to query send context of ccBPM in IR?

Similar Messages

Maybe you are looking for