How to quit the games after open it?

iOS 7 How to Close Apps
Double Tap the Home Button... Then swipe the App (not the icon) Upwards... Tap the Home Button when finished.
From Here > http://support.apple.com/kb/HT4211

Similar Messages

How do i play games after downloading from the app store on my laptop

How do i play games after downloading from apps on my windows 8 laptop??

iOS applications can't be run on a computer.
(100210)

How to cut the zeros after the decimal point ?

Hello everybody,
does anyone know a solution how to cut the zeros after the decimal point at at CHAR data field?
For example the field
&RM06P-PRMG1&
This is a char field in the database, so that the command
&RM06P-PRMG1(.0C)&
doesn't work.
At the moment the output on the form is like that
124,000
It shoud be like that
124
It would be great if anyone could help me!
TIA!
Strobbel

Hi Strobbel,
If you are working on standard sapscript, first make a zcopy of it, do the modifications in that and assign the new form to the output types in tcode NACE.
First you need to create a program to write the logic, so go to tcode SE38 , create a new program (say zremove_zero) with Program type Executable.
Now you will see ABAP Editor with statement;
Report zremove_zero.
Add the following lines below the report statement.
*&      Form remove_zero
*       text
*      <--lv_AMT text
FORM remove_zero CHANGING lv_amt.
DATA p_amt TYPE p.
MOVE lv_amt TO p_amt.
MOVE p_amt TO lv_amt.
Condense lv_amt.
ENDFORM.
Now save and activate the program.
Now open the zcopy of your script and Just above the statement &RM06P-PRMG1& write the following lines;
/: perform remove_zero in program zremove_zero
/: changing &RM06P-PRMG1&
/: endperform.
Now you can see your amount printing without decimals.
Try and let me know, hope i have guided you clearly.
Regards
Karthik D
P.S.: I advice you to take help from an ABAPER.

Hi. I just downloaded "angry birds" from the iTunes store. It says it was successfully downloaded and that I can use it on the two mac products I have. I can see an icon for it in the finder on the mac, but I can't figure out how to play the game. Anyone?

Hi. I just downloaded "angry birds" from the iTunes store. It says it was successfully downloaded and that I can use it on the two mac products I have. I can see an icon for it in the finder on the mac, but I can't figure out how to play the game. Anyone?

Thank you for your reply. After a lot of fruitless searches, I hit on a page that offered the same wisdom you did. I feel like rather a fool for not knowing that. Grr. I really appreciate your answer, and that you didn't end it with "dummy." Cheers to you. Hope someone does something kind for you today.

How to use the game centre for apple iPad mini

How to use the game centre for apple iPad mini

Here you go:
Using Game Center on your Mac or iOS device - Apple Support

I have a game in the game center(clash of clans) and i have more than one apple mobile on the same account and i dont know how to delete the game(clash of clans) from the game center

i have a game in the game center(clash of clans) and i have more than one apple mobile on the same account and i dont know how to delete the game(clash of clans) from the game center.

Hello ayhamnaser,
Thank you for using Apple Support Communities.
For more information, take a look at:
Using Game Center
http://support.apple.com/kb/ht4314
If in Game Center > Me > Games > my iOS Games > swipe to the left on the game > Remove.
Have a nice day,
Mario

How to solve the problem when opening program illustrator cs6 ERROR: 16 It is WINDOWS 8.1 / 64 BIT help please

how to solve the problem when opening program illustrator cs6
ERROR: 16
It is WINDOWS 8.1 / 64 BIT
help please

Thanks, Jeff! The file Adobe Setup Error.log contains the following information:
02/14/14 07:20:26:474 | [INFO] | | OOBE | DE | | | | 8860 | DEVersion: 5.0.0.0
02/14/14 07:20:26:475 | [INFO] | | OOBE | DE | | | | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
[    8860] Fri Feb 14 07:20:26 2014 INFO
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
CHECK : Another Native OS installer already running
Create Required Folders
Assuming uninstall mode
Lookup for master payload
[    8860] Fri Feb 14 07:20:26 2014 ERROR
DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
[    8860] Fri Feb 14 07:20:26 2014 INFO
:: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 0 warning(s)
ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 33 - The product is not installed, cannot uninstall.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ...

How to enable the screen after triggering the error message

Hi All,
we have a tcode IW31, in that one field(WBS element -PROID) is not mandatory. so we have written the following code to make it mandatory in a user exit EXIT_SAPLCOIH_010.It's triggering the error message, but it is going into disable mode. Please sugget me how to enable the screen after getting the error message triggering.
if not caufvd_imp-proid is initial.
select single * from t350 into wa_t350
          where auart    = caufvd_imp-auart
            and imord    = 'X'.
if sy-subrc is initial.
    pspel = caufvd_imp-proid.
else.
    call function 'CONVERSION_EXIT_ABPSP_OUTPUT'
         exporting
              input = caufvd_imp-proid
         importing
              output = l_posid.
    concatenate text-t10 l_posid text-t11
                into l_textline1 separated by space.
    message i208(00) with l_textline1.
endif.
else.
message e208(00) with 'Please maintain WBS element in Location Tab'.
endif.
Thanks

Hi,
Instead of error message use status message like
message s208(00) with 'Please maintain WBS element in Location Tab'.
Leave to screen sy-synnr.
This will allow to move to the screen and have in enable mode.
WIth Regards,
Dwaraka.S
Edited by: Dwarakanath Sankarayogi on Feb 13, 2009 7:46 AM

Anyone knows how to get the photos after IMG_9999 from iphone? :-(ps:... i got them all in my camera roll but when i connected to the computer there's nothing after IMG_9999..

anyone knows how to get the photos after IMG_9999 from iphone? :-(ps:... i got them all in my camera roll but when i connected to the computer there's nothing after IMG_9999.. many thanks :-)

They show in the camera roll, just not your computer?
Have you checked every folder that is in the DCIM folder?

How to suspend the installation after downloading packages via ota for lollipop 5.0.1. on my Note 4. always asks me to install it on notification bar. thank you :)

How to suspend the installation after downloading packages via ota for lollipop 5.0.1. on my Note 4. always asks me to install it on notification bar. thank you

If you factory reset, it wont make the update go away, but you should back up and reset before you install the update.

I purchased NBA League Pass but I don't know how to download the Game Time app on my Apple TV.

I purchased NBA League Pass, but I don't know how to download the Game Time app on my Apple TV. What is a Login ID?
Is that the same as my email adress or my password, or my account name or my screen name?

You will need both License Keys the Lightroom 4 upgrade key and the Lightroom 3 key. You can download the latest LR 4.4.1 from the site below. Just make sure you get the appropriate one for your operating system.
Adobe - Lightroom : For Macintosh
Adobe - Lightroom : For Windows
Install then you first enter the LR 4 upgrade serial number and then the LR 3 serial number when prompted.

How to run the BAPI after creation or Modification ?

HI Abapers,
How to run the BAPI after creation or Modification ? What is the step by step procedure to run the the BAPI?
Immediate reply is highely appriciable.
Regards,
Chow.

Hi
If you have done with BAPI creation correctly Run it similar to the fun mdule which we run in SE37 calling this BAPi in the program with CALL FUNCTION and passing the necessary parameters
see the sample bapi code how it is called in Program
data : w_resb_header like bapirkpfc.
data: begin of itab_resb occurs 0.
include structure bapiresbc.
data: end of itab_resb.
data: begin of itab_bapi_return occurs 0.
include structure bapireturn.
data: end of itab_bapi_return.
data : w_resb_no like bapirkpfc-res_no.
w_resb_header-plant = p_werks.
w_resb_header-res_date = sy-datum.
w_resb_header-created_by = sy-uname.
w_resb_header-cost_ctr = '0000010001'.
w_resb_header-move_type = '201'.
w_resb_header-gr_rcpt = w_room_time.
w_resb_header-part_acct = 'OR'.
*ITEM DATA
loop at i_details.
itab_resb-material = i_details-matnr.
itab_resb-plant = i_details-werks.
itab_resb-store_loc = i_details-lgort.
itab_resb-quantity = i_details-qty.
itab_resb-unit = i_details-meins.
append itab_resb.
clear itab_resb.
clear i_details.
endloop.
call function 'BAPI_RESERVATION_CREATE'
exporting
reservation_header = w_resb_header
NO_COMMIT =
MOVEMENT_AUTO =
importing
reservation = w_resb_no
tables
reservation_items = itab_resb
return = itab_bapi_return
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'
IMPORTING
RETURN = .
wait up to 5 seconds.
w_resb_no contains your reservations numnber
Regards
Anji

I have recently had to fire my web designer who was using iWeb. Now I'm trying to figure out how to get the site to open in iWeb on my new MacBook Pro. Is there a way?

I have recently had to fire my web designer who was using iWeb. Now I'm trying to figure out how to get the site to open in iWeb on my new MacBook Pro. Is there a way?

Firstly iWeb CAN'T IMPORT any kind of published html code as it has no import facility. You can however add html code, javascript and css by selecting the html snippet and placing it on your page the entering the code in here and clicking on Apply. You DO NOT create a shape as you say - you use the html snippet and place your code in there.
There are not really a lot of ways in which you can write code - if you want to enter small amounts of code, then you would use an ordinary text editor to do this such as Text Edit on a Mac or Text Wrangler. If you want to add code to iWeb like this, then you would either use the html snippet method in iWeb itself or you would have to publish the site to a local folder from iWeb and open the relevant html page with a text editor and add the additional code in this way and then publish. However, if he decided to add the code with a text editor, then you would have to upload the pages directly to the server using an ftp client - if you try to upload the site directly from iWeb, all the extra code will be overwritten.
As for checking whether the site was created using iWeb, all you need do is view the site in Safari and then click on View and then select View Source Code and it will tell you.
Even thoough extra code was added to the site and he might well have done this by publishing to a local folder and adding the code with a text editor, he should still have the domain file for the site too.
Ask again. I'm sure that for adding quick code, most would not want to use programmes such as Dreamweaver, but a simple text editor will suffice. As OT already said, if he claims that he does not have the domain.sites file, then try Flux 4 which is a web design programme and has full import facilities. At least this way, if he just gives you the published version of the site, you have some way of opening it.
You can download a free trial of Flux 4 and you can also purchase the full version from the Mac App Store if you decide you like it.

Mail does not load the mail after opening with 10.10.3 on macbook air

Mail does not load the mail after opening with 10.10.3 on macbook air

Under Window in the Menu bar select Connection doctor. You will see green to indicate a connection and red to show there is a problem. Except for iCloud account you'll see two entries for each account 1) receiving and 2 SMTP for sending.
If it's red, this usually means it's missing the password.
For Incoming messages, set in the account window, under Account Information tab.
For Outgoing (SMTP) messages, follow these steps:
EDIT SMTP SETTINGS
In Accounts window > Outgoing Mail Server SMTP: select to Edit SMTP Server list... from popup.
Select account in the list.(It's not uncommon to find extra SMTP servers listed. When you remove account, Mail does not delete the smtp info. You might need to do some clean up in the list to remove the extras.)
Under Advanced Tab:
Apple defaults to the default ports (25,465, 587) but some servers prefer a custom port. Check to see what port they recommend. Gmail for example likes 465, Outlook.com 587.
Verify if your server require SSL.
User Name. Enter full email address eg. [email protected]
Add password if it is blank.(If you have two step authentication setup, you'll need to get an app specific password more info)
Open Connection Doctor under Window in the Menu bar.
Do you see green light now for your account SMTP?

TS1702 How to delete the game before off the Ipad?

How to delete the game before off the Ipad?

If you want to delete a game from your iPad, hold down its icon until all the icons begin to jiggle, and then tap the (x) button attached to the game you want to delete. Confirm the deletion and then press Home to stop the jiggling.

How to quit the games after open it?

Similar Messages

Maybe you are looking for