How to quit using the onboard RAID Z87-G45

In hindsight, using the onboard RAID has a number of drawbacks, from making updating the BIOS risky, disabling AHCI for optimum SSD use, and the occasional degradation of performance while verify/repair operations run (about 6 hours per Terabyte).
If I were to buy a large enough SSD, would it be able to clone the RAID mirror?

Quote from: pandaz on 01-September-14, 15:52:13
SSD is already quite fast enough and buying large capacity of SSD would cost you $$$   
I've only got about 300GB actual data on the RAID.   Once the RAID is freed-up, I gain the use of multiple 1TB SATA drives.
So, only need a 500GB SSD.

Similar Messages

  • How can i use the onboard memory from NI6534

    I want to use the onboard memory of PCI 6534,but i don´t how can i put my data on this memory? are there function or command for that?
    thank you.
    Armand

    Armand,
    Please reference the User Manual for the PCI-6534. Specifically, pages 2-10 and 2-22 in the Continuous Output sections explain how to leverage the onboard memory using either LabVIEW or the NI-DAQ C interface. For LabVIEW you will set the Pattern Generation Loop Enable attribute to ON in the DIO Parameter VI.
    653X User Manual
    http://digital.ni.com/manuals.nsf/websearch/EDE443F5C700373A862569B90072D26F?OpenDocument&node=4575_US
    Regards,
    Justin Britten
    Applications Engineer
    National Instruments

  • How do I use the onboard clock when using DAQmx timing?

    Hi,
    I'm using the example: Count Digital Events-Buffered-Finite-Ext Clock.
    I want to use the PCI-6602 onboard clock. When I leave the sample clock source unwired I get an error message :
                                                      ​                                                  ​                                                  ​        Error -200303 occurred at DAQmx Start Task.vi:1 
                                                      ​                                                  ​                                                  ​        Possible reason(s):
                                                      ​                                                  ​                                                  ​        External sample clock source must be specified for this application.
    Can someone tell me what I'm doing wrong?

    Counters do not have an internal onboard clock like the AI and AO subsystems do.  So you have to generate the sample clock for your edge counting task yourself.  This is often done with the other counter by generating a continuous pulse train.
    I hope this helps!
    gus....

  • How Can I Use the Onboard VGA WITH a PCI-E Display Adapter?

    Hi everyone,
    My machine is a HP ProDesk 490 G2 MT and i have AMD Radeon HD 8490 DP (1GB) PCIe x16 Crd E1C64AA as my graphic. I'm newbie in this kind of hardware stuff. but my question is if i have a several plugs on my computer why i just can display one monitor?
    Is there a way to use at least two monitors on my machine without buying new graphic cards?
    Thanks in advance.

    MrZogs, welcome to the forum.
    I believe that you would get more responses to your question if you start a thread here.  They are the members who know your computer best.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • How can I use the QR codes with my iPad 2. do I need to download first an app ?

    How can I use the/read the QR codes with my iPad 2 ? Do I need to download an app ?

    Yes.  There are quite a few available for free in the app store

  • How can i use the webcam in the VMware fusion?

    I am using Windows XP with VMware fusion in my MacBook( OS X 10.5.1). Everything is good except the webcam. I have no idea how can I use the webcam(built in MacBook). Can someone give me more information about that? Thanks a lot!

    Not sure I quite understood your question? However, I am running Win XP in VMWare Fusion an all the peripherals such as Bluetooth, IR Receiver and the webcam are identified as USB device and are therefore supported. No problem to use it with Messenger, Skype or Trillian. The only thing you have to do is to click on one of the small USB symbols in the lower right corner of the VMWare status line in order to enable it for the use in VMWare. That's it.
    Hope this helps to fix your problem
    Vitor

  • How can I use the speakers from my old iMac (with miniRCA? plug) on a new iMac

    How can I use the speakers (M-Audio) from my old 24" iMac on a new 27" iMac?  There is no jack on the new iMac - is there an adapter that will use the mini-RCA (?) plug from my old speakers to connect them to a new iMac?  Thanks ...

    Thanks again!
    Hmmm ... I wonder.  The input jack for external speakers quit working on my old iMac (it made lotsa static noise for a while when I moved the plug or computer, then quit working completely; I figure something inside the computer got loose or crapped out - and I'm too cheap/lazy to take it the 20 miles to the nearest shop that might fix it).  When I plug the speakers into the headphone jack on the old iMac, I get very low volume or just one channel.
    I don't have the new iMac yet, but I was hoping to use these old speakers instead of buying new ones.  I will certainly try your solution - what do I have to lose?  If they don't work, then I get new ones - or try something else.
    Many thanks for your time!

  • How can utilize/use  the extended space in system.img ?

    Hello Guru's
    In Oracle VM , How can utilize/use the extended space in system.img ?
    a) Increased the system.img size using the following command:
    # dd if=/dev/zero bs=1M count=12960 >> /OVS/running_pool/18_test1/System.img
    b) Verified the added size of system.img file at OVS server.
    # ls -lh System.img
    -rw-r--r-- 1 root root 19G Feb 9 20:58 System.img
    c) Started GVM and additional size/memory is not shown ?
    # df -m
    Filesystem 1M-blocks Used Available Use% Mounted on
    /dev/xvda2 3984 2292 1652 59% /
    /dev/xvda1 92 12 75 14% /boot
    tmpfs 512 0 512 0% /dev/shm
    + Tried working with resizefs , resize2fs , cmd did not work.
    (GVM is created using Oracle provided template)
    + am i missing anything ?
    Oracle VM Setup Detail:
    oracle-logos-4.9.17-7ovs
    enterprise-linux-ovs-5-0.17
    ovs-release-2.2-0.17
    ovs-utils-1.0-33
    kernel-ovs-2.6.18-128.2.1.4.9.el5
    ovs-agent-2.3-29
    Thanks in advance for your help.
    Best Regards
    Basu

    I am not positive what you did is going to work, but it seems like you did the equivalent of imaging a small disk on a bigger disk. In that case, the first thing to do is update the partition table with fdisk. Start with fdisk -l in the vm for general information about the disk. Hopefully, the additional space will show. Then, work with fdisk to use the extra space. The easiest is to add a partition, then a file system on it. It is also possible to expand the last partition (you might have to delete it first), then expand what is on it (may be RAID, LVM, or the file system), layer by layer. As usual with fdisk, you run the risk of thrashing it all, so you may want to practice on a copy first. Obviously, the extra space can only be added to the last partition of the small disk.
    If the situation is more complex, you may have to boot a VM with both the small disk and the big disk at the same time. If you boot the VM off of an iso DVD image, you can then shell out, then run fdisk to partition the big disk the way you want, then use dd to copy the partitions you want in the order you want from the small disk. I am pretty sure not all combinations will work, but you get the idea. You can then take the small disk out, and boot off of the big disk.
    Come to think of it, you might just be better off with adding more space as a second virtual disk. You would then be free to partition/format it the way you want without messing with the first disk. Linux is so good with disk management, so many options.
    As a general statement, though, I like to put some distance between the high level file systems and the low level disk partitions, so I use LVM (Logical Volume Manager).
    Best of luck, keep us posted.

  • My Macbook Pro has recently started to mute/unmute itself randomly. VERY FRUSTRATING! It doesn't matter whether I have speakers connected or using the onboard speakers. Any suggestions?

    My Macbook Pro has recently started to mute/unmute itself randomly. VERY FRUSTRATING! It doesn't matter whether I have speakers connected or using the onboard speakers. Any suggestions?
    I have looked at other forums and the fixes suggested do NOT work. 
    What would cause this?
    How is it corrected?

    Hello DChrystal
    Try paying attention to the Keyboard Viewer to see if any keys are being pressed that could be causing the sound to be muted. If it is, try it in another user to see if it is software that is causing the issue or if it is the actual keyboard that is having the issue.
    One or more keys on the keyboard do not respond
    http://support.apple.com/kb/ts1381
    Regards,
    -Norm G.

  • How do I use the Japanese fonts in Font Book in a Pages document?

    How does one use the Japanese fonts in Font Book in a Pages document. Pages has its own fonts but I cannot get the Japanese fonts into it.

    To type japanese on a computer you change the keyboard, not the font.  Go to system prefs/keyboard/input sources and add Japanese/Kotoeri to the list, then select Hiragana in the "flag" menu at the top right of the screen, then type.  The font will take care of itself.
    http://redcocoon.org/cab/mysoft.html
    If you have any further questions, just ask.

  • How do I use the web cam on my pc? Hp w2007 I have windows vista

    How do I use the web cam on my pc?  Hp w2007 I have windows vista

    Hp w2007 is a HP monitor without webcam ...
    Where is the webcam?
    V.
    *** Say 'Thanks' with Kudos ***

  • How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
    i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
    unplug the at&t box for a minute and plug it back in
    factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
    connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
    create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
    login to your at&t router and disable wifi on it
    add new clients to the new wifi network, and point your Macs to the time machine for backups

  • How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    read this
    https://discussions.apple.com/message/20429789#20429789

  • How do I use the adjustment brush to mask and not turn my item green?

    I have shot some products for my web site.  I need completely white backgrounds. I have tried to mask the product and lighten the whites, but when I click done, my product has turned very green.
    Why?  How do you use the brush?  Also, where is the invert to make this easier on me?
    Kind of urgent, I need to get these items on my site already.
    I know the answer is simple... I just don't know what it is.
    Thanks

    Have you tried without the adjustment brush, by simply adjusting white balance from the basic tab in develop?
    Click on the eye dropper tool and then click on a neutral gray color. Use the background if it is neutral rather than white. You may need to keep selecting the eye dropper to click in a few different places for best results.
    If you decide to use the adjustment brush you can show or hide the mask. Uncheck the mask when you have finished painting; then use the sliders, starting with tint and temperature.

  • HT4241 How do I use the mini deplayport to hdmi

    How do I use the mini displayport to hdmi on my tv?

    You use something like this:
    http://www.amazon.com/Mini-DisplayPort-HDMI-Adapter-Cable/dp/B003OC6LWM/ref=sr_1 _1?ie=UTF8&qid=1365115124&sr=8-1&keywords=minidisplay+port+hdmi
    Ciao.

Maybe you are looking for

  • Why does it take CS4 Encore 2 days to transcode Blu-ray h.264 High Def

    I have been trying to create a Blu-ray disc for Days by adobe dynamic link from Adobe Premiere Pro. I have no problems with creating a DVD. I only have problems when I try sending over 1080i High Definition footage instead of Standard Definition. I w

  • PLSQLAssociativeArray - ArraybindSize

    Hello all, Does anybody know the maximum size of an output parameter for ArrayBindSize when accessing a table of varchar2. And if so is their a way to set the limit? Right now I can go to a maximium of 2000 characters. thanks, Dhaval

  • Vi reference = function pointer for external DLL?

    So I'm porting this simple program from C to LabVIEW. All it does is getting some signals from an haptics hardware (Sensable Phantom Omni). It should be simple, but it has shown several complications. (been stuck for 2 weeks ) I successfully imported

  • Error in display the form 16

    Hi Gurus, I am not in a position to see the values in the form 16, what is procedure, can  any one explain the procedure. thanks in advance //sri

  • h:inputHidden

    suppose that i have:   <h:inputHidden id="id" value=#{bean.property}>how could i get the value of the hidden field? Regards, Rafael Roque