How to raise error message in MB_DOCUMENT_BEFORE_UPDATE?
Dear Friends,
I have a situation like, need to thro an error Message inside the BADI: MB_DOCUMENT_BEFORE_UPDATE.
Based on some validations on XMSEG parameter inside the above BADI, I am raising an Error Message as usual.
Message E208(00) with 'Posting error..'.
When I raise the above error, the system ends with Short Dump.
Could anyone please let me know, how to handle the above?
Thanks in advance,
Ramani N
>
Gaurav Gupta wrote:
> Hi
> I would like to suggest you to check whether you have used MESSAGE-ID addition in your REPORT statement or not. We are supposed to use it whenever we are trying to display error messages like *Message E208(00) with 'Posting error..' *.
> Hope this solves your Problem.
>
> Regards
> Gaurav.
Hi Gaurav,
My query is about BADI. Hence, we can not use REPORT statement.
Rgds,
Ramani N
Similar Messages
-
How to raise error message in substitution exits?
Hello Experts,
How to raise error message in substitution exits. I have tried with normal statement,
Message 'Welcome!!' type E.
But its inot stopped at that error message, Its goes next standard code and picked other messag and shown as error message.
Th exit seems U100, I that I want to stop by using error message based on some condition. Please throw the answer quicklyHI Sanjana,
In the Substitution exits you can create the message in the configuration it self.
You dont't need raise message explicitly.
Thanks, -
How to raise error message from PAI of oops ALV report
Hi All,
I have a requirement to raise error message form editable oops alv . After entering the data and then press SAVE button .
Please help.
Thanks in AdvanceHI SK,
Write a Local class (Event Handeler) to handel the events. In Editable ALV once the user enter a value, CL_GUI_ALV_GRID will raise an event called DATA_CHANGED.
1. Define and Implement a local class to handle that event.
In the implementation of this class you need to get data from imported object to an internal table, then compare the same with the ALV output table.
* Local Class to handler the events raised from the ALV Grid
CLASS LCL_EVENT_HANDLER DEFINITION.
PUBLIC SECTION.
* Method to handel EDIT event, DATA_CHANGED of CL_GUI_ALV_GRID
METHODS : ON_DATA_CHANGE FOR EVENT DATA_CHANGED OF CL_GUI_ALV_GRID
IMPORTING ER_DATA_CHANGED.
ENDCLASS.
* Event handler class Implementation
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
METHOD ON_DATA_CHANGE.
DATA : LT_MODIFY TYPE LVC_T_MODI,
LS_MODIFY TYPE LVC_S_MODI.
* Copying changed data into intenal table from Object
LT_MODIFY = ER_DATA_CHANGED->MT_MOD_CELLS.
* Modifying the ouptut table with the changed values
IF LT_MODIFY[] IS NOT INITIAL.
*Compare the ALV Output table with LT_MODIFY
ENDIF.
ENDMETHOD.
ENDCLASS.
Then raise a message on required condition in the same method.
Note: To trigger the above method, you need to set event handler before displaying ALV (before calling method SET_TABLE_FOR_FIRST_DISPLAY)
* Creating object for the Local event handler class
CREATE OBJECT GR_HANDLER.
* Set handler (call method of Event_handler) to handler Edit event
SET HANDLER GR_HANDLER->ON_DATA_CHANGE FOR GR_GRID.
Regards,
Vijay -
How to raise Error Message in foreground through Dynamic Action?
Hi,
I have a requirement where I have to raise an error message in foreground so as to stop processing whenever HR_INFOTYPE_OPERATION fails to update a record in a dynamic program. I tried using MESSAGE statement but it did not work, as the error message was not displayed properly on the Infotype screen that calls the dynamic action.
For ex.: If infotype PA0000 is calling PA0014 through dynamic action, then I want the error message to be displayed on the Actions Screen of PA0000.
Is there any specific way to raise error messages through dynamic action programs?
Quick answers will be appreciated.HI Sanjana,
In the Substitution exits you can create the message in the configuration it self.
You dont't need raise message explicitly.
Thanks, -
Hi all,
We are using SAP ABAP Web Dynpro Component: RPLM_QIMT_NOTIF_COMP to create notification(IW21). After entering data to create notification screen and press save, we want to do some validations and trough error message to screen and stop saving notifications until errors are fixed. Could someone give us clue how we raise error messages. Rather sample code to raise error messages. Notification is created via portal.
Rgds,
HarishHello Harish,
When the user presses on the save button, an event would be triggered. You can catch this event and perform your validations. Once the validations are done, you can use the FPM message manager to report your error messages. (IF_FPM_MESSAGE_MANAGER). You can instantiate this API in your component and then use the methods from this API to report your messages on the UI.
Regards
Rohan -
How to display error message in MSS
Hi all ,
I want to desplay an error message in MSS(Portal) at the time of compensation management .
I am implementing BADI HRECM00_SALARY.
Please suggest me how to do that .
Thanks in advance .
Naval Bhatt
Edited by: naval bhatt on Jun 11, 2008 11:16 AMHi,
Raise error message in between begining of the BADI HRECM00_SALARY and Closing statement of BADI.
Implement the BADI at the time of Creating or submit the details of compensation.
Thanks
Gopal.sattiraju -
Best Practices Question: How to send error message to SSHR web page.
Best Practices Question: How to send error message to SSHR web page from custom PL\SQL procedure called by SSHR workflow.
For the Manager Self-Service application we’ve copied various workflows which were modified to meet business needs. Part of this exercise was creating custom PL\SQL Package Procedures that would gather details on the WF using them on custom notification sent by the WF.
What I’m looking for is if/when the PL\SQL procedure errors, how does one send an failure message back and display it on the SS Page?
Writing information into a log or table at the database level works for trouble-shooting, but we’re looking for something that will provide the end-user with an intelligent message that the workflow has failed.
Thanks ahead of time for your responses.
RichWe have implemented the same kind of requirement long back.
We have defined our PL/SQL procedures with two OUT parameters
1) Result Type (S:Success, E:Error)
2) Result Message
In the PL/SQL procedure we always use below construct when we want to raise any message
hr_utility.set_message(APPL_NO, 'FND_MESSAGE_NAME');
hr_utility.raise_error;
In Exception block we write below( in successful case we just set the p_result_flag := 'S';)
EXCEPTION
WHEN APP_EXCEPTION.APPLICATION_EXCEPTION THEN
p_result_flag := 'E';
p_result_message := hr_utility.get_message;
WHEN OTHERS THEN
p_result_flag := 'E';
p_result_message := hr_utility.get_message;
fnd_message.set_name('PER','FFU10_GENERAL_ORACLE_ERROR');
fnd_message.set_token('2',substr(sqlerrm,1,200));
fnd_msg_pub.add;
p_result_message := fnd_msg_pub.get_detail;
After executing the PL/SQL in java
We have written some thing similar to
orclStmt.execute();
OAExceptionUtils.checkErrors (txn);
String resultFlag = orclStmt.getString(provide the resultflag bind no);
if ("E".equalsIgnoreCase(resultFlag)){
String resultMessage = orclStmt.getString(provide the resultMessage bind no);
orclStmt.close();
throw new OAException(resultMessage, OAException.ERROR);
It safely shows the message to the user with all the data in the page.
We have been using this construct for a long time for all our projects. They are all working as expected.
Regards,
Peddi. -
Dear Experts,
I have a requirement for making material description as non mandetory in change request view of mdg material screen.
I have done that using field usage in get data method of feeder classes, but still message is displaying.
This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
How to prevent error message for material description in MDG material detail screen, when user click on check action.
Thanks
SukumarHello Sukumar
In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
Regards, Ingo Bruß -
How to print error messages in browser?
When I visit a jsp file in browser, there's some errors in the jsp file, so the browser returns
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
I want the detail error messages, so I can debug my problem. How to print error message in browser or find the message in some log file?Hi Kanaraja,
Thanks for your answer. I need to get certain information from the list. So, I use LIST_To_ASCII FM. However, may I know the ascii_tab should be type to what? And after this FM, do I have to use another FM to display the ascii list?
data ABAPLIST type ABAPLIST OCCURS 0.
SUBMIT RPCALCU0 VIA SELECTION-SCREEN
with PNPXABKR = 'US'
with PNPTIMRA = 'X'
with PNPPABRP = '10'
with PNPPABRJ = '2003'
with PNPPERNR-LOW = '100750'
with PNPPERNR-LOW = '109202'
with PNPPERNR-LOW = '100255'
with PNPABKRS-LOW = 'US'
with SCHEMA = 'ZUSP'
with RADI_EDT ='X'
with EDT_VARI = 'CUS&SAP_US'
with TST_ON = 'X'
EXPORTING LIST TO MEMORY and RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = ABAPLIST
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
list_index = -1
TABLES
listasci = asci_tab
listobject = ABAPLIST
EXCEPTIONS
empty_list = 1
list_index_invalid = 2
OTHERS = 3.
IF sy-subrc NE '0'.
WRITE:/ 'LIST_TO_ASCI error !! ', sy-subrc.
ENDIF. -
How to give error message for the screen element text field when wrong i/p
How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar ShuklaHi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla, -
How to make error message as warning message
how to make error message as warning message? ie i get error message hence cannot save the slaes order i want to make that error message as warning so that i can save the sales order please help.
Hi
If a message is a custom message, then by changing the message type from E(Error) to W (warning) we can convert the message type into error message. This is done with the help of development guy. A change in the code is needed.
If it is a standard message, then it depends on whether we have teh access to change the message type. If access is there, then it is possible to change the message from Warning to Error. i.e. If we are capturing std SAP message in our code and displaying then we can change it, else if SAP message is displayed directly, we cant change it.
So, to change it, capture the error message from SAP in some Zcode and then convert that message into a custom message of message type E.
The whole change needs ABAP support.
Try with tcode <b>OVA2</b> settings selecting for sales order or in SAPRO--SD-BF-Log of Incompletion Items
Message was edited by:
SHESAGIRI.G -
How to display error message in abap
How to dispaly error message in report?
i have to check the range bewteen two days and if it is not in range have to display error message only once.
next time if i press the execute button report will get executed without showing the warning message.
i am calculating the days between two dates, i am displaying the error message but if i press the execute button i will not allow me to execute the report.it again shows me the error message.i have to skip this in 2nd time.
can any one suggest what to do with this?hello suman,
i am using select-option in my report. And i have to check the difference between two dates in select option input box( low-value and high-value). if it is greater then suppose 10 then i have to display warning message at once and then if click on execute button , the report should get executed without showing any warning messages in report.
here i am attaching my source code.please take a close look and tell me where should i have to make change.
SELECT-OPTIONS :s_bedat FOR ekko-bedat.
AT SELECTION-SCREEN ON s_bedat.
IF NOT s_bedat IS INITIAL.
PERFORM bedat_validate. " Perform for Purchasing Document Date Validation
ENDIF.
FORM bedat_validate . " Form for Purchasing Document Date Validation
DATA : diffr TYPE i.
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
EXPORTING
i_datum_bis = s_bedat-high
i_datum_von = s_bedat-low
I_KZ_EXCL_VON = '0'
I_KZ_INCL_BIS = '0'
I_KZ_ULT_BIS = ' '
I_KZ_ULT_VON = ' '
I_STGMETH = '0'
I_SZBMETH = '1'
IMPORTING
e_tage = diffr
EXCEPTIONS
DAYS_METHOD_NOT_DEFINED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
IF diffr GT 31.
MESSAGE s009(zerrormsg) WITH text-000 DISPLAY LIKE 'W'.
LEAVE TO LIST-PROCESSING.
ENDIF.
ENDIF.
ENDFORM. " BEDAT_VALIDATE -
How to display error message in Shopping Cart?
How to display error message in Shopping Cart and stop the shopping cart for further processing? I try MESSAGE w001(zshop) or MESSAGE e001(zshop). But it is causing run-time error.
Hi Paul,
In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
Regards,
Noel -
How to raise error in Essbase UDF.
Hi all.
I have an udf:
pulbic statuc void publish(String arg) throws RTimeException {
throws new RTimeException ("error");
and RTimeException defiend as:
class RTimeException extends Exception
RTimeException()
RTimeException(String msg)
super(msg);
When i call the UDF from a business rule, it completes without any error.
How to raise error to force the business rule to fail?
Oleg.UP!
-
How to track Error message no.
Hi,
Could anyone please expalin how to track error messages using message no.
Urgent???????????????????
Reg,
CMHi,
You can not track just based on the Message number whether it is Error or Warning Message and where it is effecting.
But for this message number you will have Message class/Application Area Based on this Message class you can check on which area (Masterdata/Purchasing/Inv Mgmt/LIV) this message number is effecting.
Then in SE91 you can enter this Message class then system will show you which area it is related,what is the message number description.
Then in MM IMG Settings you can check message number for that Particular Area.--Define Attibutes for System messages in every area.
rgds
Chidanand
Maybe you are looking for
-
IPhone no longer can sync with iTunes on Mac Intel Mini
I have an original iPhone (not 3G). It was working fine until today. Today when I booted my mac mini, Software update said that there was an iTunes update. I downloaded and installed version 8.2 of iTunes. When I connected my iPhone to my mac mini (I
-
Hanging Sessions in SAP ITSmobile/Standalone SAP ITS Gateway
Hi, We have recently implemented SAP ITSmobile/Standalone SAP ITS gateway 6.20 (6200.1035.9507.7, build 1121051 - Single host) connected to LXE RDT device for warehouse operation. In warehouse forklift operators quite often lose connection to Wireles
-
Incremental Backup (Exp & Imp) Oracle 9i(9.2.0.1)
I have used oracle 9i (9.2.0.1) version , i want to take incremental backup for a particular user... is it possible? if yes what is the actual command please tell me.
-
Compatibility of oracle 10g with solution manager 3.2
Hi, Is oracle10g compatible with solution manager 3.2 and linux 4.0 version.please let me know asap. Regards, Deepthi Reddy
-
Logic Projects folder / troubles / lost
Hi, i bought a new macbook, when i installed "Logic" i didn't move my project folder from my old mac to the new mac. i worked on some new stuff on the new mac, finished some projects, and then decided to open few old ones from the old hard drive (old