How to raise IP profile and improve BB speed?

Hello, my BB speed is much slower than I would like; i ran the tests and found the following:
Download speedachieved during the test was - 3.82 Mbps
For your connection, the acceptable range of speeds is 0.6 Mbps-7.15 Mbps.
Additional Information:
Your DSL Connection Rate :5.6 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 4 Mbps
I ran the test using an ethernet cable as instructed. I have a Home Hub 3. The ADSL stats are:
Line state:
Connected
Connection time:
2 days, 21:43:24
Downstream:
5.469 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
9.2 dB / 23.0 dB
Line attenuation (Down/Up):
32.6 dB / 19.0 dB
Output power (Down/Up):
19.7 dBm / 12.3 dBm
FEC Events (Down/Up):
800054 / 147
CRC Events (Down/Up):
2262 / 73
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
35184 / 63
Error Seconds (Local/Remote):
1081 / 98
How do I get the speed increased, please? Can anyone help?
All advice gratefully received, thank you.

providing you maintain a stable connection for 3/5 days your IP profile will increase automatically post back after that time if it has not increased and we can arrange manual intervention also your noise margin is higher than normal and that can also be reset after 3/5 days stable connection
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

How to use Device Profiles and Viewing Conditions Profile in Photoshop Elements 11?

In trying to get to grips with the Colour management aspects of PSE11, I have encountered the following problems:
Having selected "Display" a sequence of clicks (Change display settings -> Advanced settings -> Colour Management -> Colour Management tab -> Colour Management)
gives a screen which includes the headings:
Device Profile and Viewing Conditions Profile.
1. Device Profile. Besides sRGB and ARGB, the profile list includes the profiles for all of the Epson papers. (I have an Epson Stylus Photo PX810FW).
I changed the Profile to an Epson Grayscale, this was accepted within the menu, but there are no changes from normal when I viewed the image on the Windows screen or within
PSE11. ("normal" is sRGB or ARGB).
I thought it worth a try to test that, if I wanted the display image to closely represent what I would get on a particular Epson paper, this may be a way to do it.(I suspected this approach because I have never
seen it in the literature!).
So what is the purpose of all of the paper Profiles appearing in the Display listing?
2. The Viewing Conditions Profile has also several options. I have tried to find the criteria for choosing one rather than the other, but failed to find any information. Can anyone help? I seek general guidance
rather than the details of the Profiles.
As a seperate question:
Selecting Image on the PSE11 menu across the top of the displayed image, and then Convert Colour Profile, I tried this process on an image, converting tiff to sRGB. When saved there was an extra asterisk in the saved title but in this case,
the file was still labelled tiff and there was no change in the number of Mbs. If a conversion has taken place, how is one to know? Does saving a tiff file as jpeg change its colour profile? When is it useful to use this feature?
Many thanks to all responders!

Addressing your second question, you are confusing two different things.
tiff is an image file format, as is jpeg, as is psd, as is png, as are dozens (if not hundreds, http://en.wikipedia.org/wiki/Image_file_formats) of other formats.
A colour profile represents the colour characteristics of devices so that, for example, displays know how to display the colours, printers know how to print them.
Image files MAY, but do not have to, contain colour profiles.
For details:
http://help.adobe.com/en_US/creativesuite/cs/using/WS52323996-D045-437d-BD45-04955E987DFB. html
http://en.wikipedia.org/wiki/Color_management#Color_profiles
http://en.wikipedia.org/wiki/ICC_profile
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

How to disable Switch Profile and Auxilliary Metadata set on UCM checkin screen?

We are using webcenter content 11.1.1.6 with Record Management component installed on top of it
While trying to checkin a new document from a normal checkin screen or from Manage attachments screen two options come at the top 'Switch Profile and Auxilliary Metadata set'
How can these options be disabled?

Hi,
The xExternalDataSet is already an empty string on the check in page
When i append &IsJava=1, the variables have these values
xExternalDataSet=
xExternalDataSet:isInfoOnly=1
xExternalDataSet:isSetDefault=1
Isn't there a config variable for this, as I see this component has come as part of record management but no option to disable when I configure record management
Thanks,
Gaurav

How to get user profiles and tasklists in axf

Hi,
We have configured the the views in the BPM Worklist ,restart all the managed servers like SOA Server,IPM Server and UCM Server.
After that navigate to url-http://ipm:16000/imaging/faces/Driver.jspx to configure command driver input parameter settings-like SolutionNamespace
CommandNamespace and provide the username.
After clicking on Execute request it generates the conversation id but when we clicked on Execute Response button the AXF Task lists and user profile fields are empty.
can anybody suggest the way to get user profiles and axf tasklist?
Snehal

Assign proper groups and/or users to BPM view created.
In IPM login and logout for that user. It will start appearing.
Regards,
Vikrant Korde

How to use ICC profiles and soft proofing profiles?

Hi,
I got an Epson Stylus Pro 3880 and Epson Hot Press paper which, upon investigation, received great profeesional reviews and, having never printed digitally before, I don't know how to use profiles for soft proofing or printing.
I don't know where to go in Aperture or what to do. My driver is up to date and I downloaded the paper profile - not sure where it ended up. What's next?
So far as I know, soft proofing is about calibrating the monitor to the paper - am I correct?
Thanks guys,
Raphael

Raphael,
A good reply is going to require a full-size keyboard, which I don't have access to just now. Here are some starter pages:
http://www.cambridgeincolour.com/tutorials/soft-proofing.htm
http://www.luminous-landscape.com/tutorials/soft-proofing.shtml (a bit grumpy and out-dated)
Fwiw, I print to Epson Hot Press using a 3880. Imho, it's a _great_ printer, and that combination of printer and paper produced state-of-the-art results. (Not suitable in all cases, but if that is a look you like, the only thing that I've seen that surpasses it is the Epson 9900, and without looking at prints side by side you can not tell them apart.)
Your profile ended up wherever you have told your browser to save downloaded files. The Epson site should provide instructions on where to move the file. Once it is in the right Finder folder, when you next Aperture it should show in your list of profiles.
Keep in mind, though, that soft-proofing is useless without a well (read: hardware-calibrated) calibrated display.
HTH,
--Kirby.
(Sent from my magic glass.)

How to raise application error and preserve open cursor...

Hello,
I have to raise an application error under certain circumstances.
In some cases there's an open cursor that has to be read by the calling application anyway because there are data that have to be read.
In other cases the cursor does not have to be read.
sample code:
create or replace procedure get_address(
pv_street varchar2,
pv_number varchar2,
pr_retid in out number,
pr_refcurs in out get_streetpkg.t_refcurs )
v_rowcount number;
v_no_suiting_number boolean := false;
begin
delete temp_addr;
-- get suiting rows
insert into temp_addr
select * from addr
where street like pv_street
and number like pv_number;
v_rowcount := sql%rowcount;
-- if no suiting row found then get all
-- suiting streets regardless of number
if v_rowcount = 0 then
v_no_suiting_number := true;
insert into temp_addr
select * from addr
where street like pv_street;
end if;
-- check whether data has been found
select count(*)
into v_rowcount
from temp_addr;
-- set return id if only one row is found.
if v_rowcount = 1 then
select id from temp_addr
into pr_retid;
end if;
-- open cursor to provide data
open pr_refcurs for
select * from temp_addr;
-- generate error - if no data found at all
-- no data has to be read...
if v_rowcount = 0 then
raise_application_error( -20001, 'no data found' );
end if;
-- generate error - or better notification - message if no number found...
-- SELECTED ROWS HAVE TO BE READ ANYWAY!!!
if v_no_suiting_number then
raise_application_error( -20002, 'streets found, but no suiting number' );
end if;
return;
end;
Prerequisites:
- The calling application reads the open cursor and closes it.
- The application cannot provide additional arguments and the stored proc cannot be converted into a stored func.
- I cannot put the procedure into a package.
- The application has to get information about success or failure (and reason of failure) through provided error numbers (-20999..-20000).
Whenever the error is raised and pr_retid was set, retid is not set in the application, neither is the cursor.
So what can I do to provide return ID and row data???
Hope anyone can help me.
Greetings, Heiko Kaschube
null

Sorry, I didn't read your list of pre-requisites carefully enough. Your problem is that prerequiste #4 (return Application Error number) is in flat contradiction with prerequisite #1 (calling application continues processing).
To restate: RAISE_APPLICATION_ERROR means "the called program has encountered a problem so please cease processing and handle the error". Using RAISE_APPLICATION_ERROR prevents the calling program doing any more processing: control goes to the EXCEPTION handler. Therefore RAISE_APPLICATION_ERROR should only be used for abnormal processing conditions.
I fail to see why you want to use RAISE_APPLICATION_ERROR to handle a situation which is quite obviously not an application error: your called program has found some data that you want to process.
yours in puzzlement, APC

And improved the speed of my iMac

using autocad on my mac becomes very slow and it will increase the RAM to 8GB

I would put in as much RAM as you can afford.
8 GBs of RAM will probably just cut it, but your iMac can take up to 32 GBs of RAM.
I would up the memory in your iMac to, at least 12 GBs and if you can afford it, consider putting 16 GBs of RAM into your iMac.
I you are concern about your iMac's speed, make sure you do not have any other CPU, GPU and RAM intense applications running in the background, also.
Make sure your HD still has plenty of free space.
If you are getting low on HD space, this can slow things down.
You should have, at least 20 % or more space left on your HD.
IFbthe amount is less than this you need to consider archiving important data/files, deleting unwanted /unneeded files
or cloning your internal drive to a much larger external FW drive and clearing as much stuff off of your internal drive to make additional space on your HD.

How to create Creation Profile

Hello all Gurus,
Can someone please tell me how to create "Creation Profile" and use them in MM scheduling agreement? I have an issue, where the user wants 2 separate creation profiles to be created so that the demands should be sent to suppliers on Thursdays and Fridays only. I maintained the creation profiles in SPRO -- MM -- Purchasing -- Scheduling Agreement -- Maintain Creation Profile for Scheduling agreement with rel. doc. But these creation profiles doesn't seems to work. What are the extra steps that we need to carry out once the creation profiles are created and then maintained in MM scheduling agreement?
If you have any knowledge on creation of CREATION PROFILES please share it with me. It will be very much helpful for me.
Thanks and Regards,
Umakanth

hi,
Go to SPRO > MM > Purchasing > Scheduling Agreement > Maint. Rel. Creation Profile for Sched. Agmt. w. Rel. Docu.
Maint. Rel. Creation Profile for Sched. Agmt. w. Rel. Docu.
In this step, you can define the release creation profile.
The latter is an instrument for determining which criteria are used to generate releases against a scheduling agreement and transmit them to the vendor.
You assign the creation profile to the scheduling agreement item in the additional data.
The creation profile controls the creation periodicity of the releases and - starting from the current date of release creation - the way in which the quantities are aggregated.
In the release creation profile, you can define
o   General Parameters
-   Which creation strategy is the basis for JIT delivery schedules and scheduling agreements.
-   How backlog and immediate requirements are taken into account during release creation.
o   Aggregation and release horizon
-   If and how schedule lines should be aggregated during release creation.
o   Release creation periodicity
-    With which periodicity scheduling agreement releases are created
o   Tolerance profile
-    That for releases created as a result of changed schedule lines, the system performs a tolerance check
o   Internet release
-    Whether an Internet release is created during release creation

Export partner profiles and SM59 Entries before system refresh

Hello All,
How to Export partner profiles and SM59 Entries before system refresh in Netweaver
thanks
Shyam

In SDN search with name RFC export ..you will get so many answers ..
Once again please find the below prcoess for RFC export/import during system refresh.
RFC Export --
go to trans dir.. and then create .ctl file as below
#cd /usr/sap/trans/bin
#vi export_rfc_<sid>_<date>.ctl
#Please create the data file as u201Cexport_<SID>_rfc_<Date>.datu201D
Export
Client=<XXX>
file '/usr/sap/trans/data/export_<SID>_rfc_<Date>.datu2019
delete from rfcattrib
select * from rfcattrib
delete from rfcdes
select * from rfcdes
delete from rfcdoc
select * from rfcdoc
delete from rzllitab
select * from rzllitab
delete from ZTCA_USER_LANG
select * from ZTCA_USER_LANG
delete from rfcsysacl
select * from rfcsysacl
delete from rzllitab
select * from rzllitab
#After that excute export command as below.
R3trans u2013w <export_rfc_<targetSID>_date.log> export_rfc_<targetSID>_date.ctl>
(Format is: R3trans u2013w <logfile> <controlfile>)
Export is finished....
Import
Example:
#cd /usr/sap/trans/bin
#vi import_rfc_pta_11042004.ctl
#Please enter the exported RFC data file in the import control as follows:
import
file '/usr/sap/trans/data/export_pta_rfc_11042004.dat'
(Enter the file name, which is created during the export process)
Regards,
Srinivas Chapa.

HT4314 I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy

I have created a new profile and copied firefox files from my old computer into it. How do I switch to the new profile, do I just delete the old one?

I am running windows 7 I had to recover my files from an external hard drive when my old computer crashed. I have created a new profiles as outlined in the firefox website and copied all the files into it. I just need to know how to use this new profile when I open firefox, do I just delete the old profile? Or do I have to reinstall firefox.

If you no longer need or intent to use that older profile then you can use the Profile Manager to remove that profile and delete the files.
*http://kb.mozillazine.org/Profile_Manager
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
*http://kb.mozillazine.org/Profile_backup

How do I delete my old gamecenter profile and start a new one

How do I delete my old Gamecenter profile and start a new one?

I suggest changing the existing ID rather than creating a new one, all purchases are forever linked to the ID that bought and can never be transferred, you can change all detauils about your ID here:
http://appleid.apple.com
Read this
http://support.apple.com/kb/HT5621

How to use the selection profile and status profile for production order?

Hi expert,
I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
Please help me.
thanks in advance.
george.shi

Hi George,
There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
In this status profile,
1.We define the sequence in which user statuses can be activated,
2.We define initial statuses
3. Allow or prohibit certain business transactions.
Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
Regards,
Raja.
Edited by: Rajarao on Oct 30, 2008 6:21 AM
Edited by: Rajarao on Oct 30, 2008 6:22 AM

I backed up a firefox profile and then deleted all data. I need to restore this profile to my new install after phone restore. How can I do this please?

Long story short - had to reformat my laptop and lost all my bookmarks and preferences. Could not get Sync to restore from the phone's bookmarks. Backed up phone's firefox profile (Android ICS) to an external SD card. Formatted both phone and computer. New CLEAN firefox install on phone but I havent figured out how to restore the profile backup from external SD back to the phone's Firefox before moving to Sync with desktop. Feeling very dumb and hoping for some help....thanks!

Thanks for responding but the link seems to be relevant to Windows. Is there a similar method for Android phones?

I am on a shared computer with several profiles. I had to delete my profile and create a new one. Now, my question. It transferred to Purchased Items to the new iTunes, so how do I get the rest of the songs to transfer to new iTunes?

I am on a shared computer with several profiles. I had to delete my profile and create a new one. Now, my question. It transferred to Purchased Items to the new iTunes, so how do I get the rest of the songs to transfer to new iTunes?

It sounds like you might have broken links to your content. Either repair these by putting the files you've recovered where iTunes expects to find them or delete the broken entries then go to iTunes Store > Purchased > Music > Not on This Computer, and click the download links.
If you have an Apple device see also Recover your iTunes library from your iPod or iOS device.
tt2

How to raise IP profile and improve BB speed?

Similar Messages

Maybe you are looking for