How to raise the ringtone volume in nokia 5200??
i cant figure it out how to raise the ringtone voice on my nokia 5200, when someone calls me the ringtone voice is low and than after like 4 seconds it goes higher and higher to the maximum...i want the ringtone volume to be at the maximum from the first second that someone calls me, some help would be great
hi,
What you need to do is go into:
"Settings" then "Tones" and make sure "Incoming Alert" is changed to "Ringing" rather than "Ascending"
I hope this helps.
Similar Messages
-
How to raise the ringtone volume te the maximum? (...
hi all im having a prob with my nokia 5200 the ringtone volume when someone calls me is low than it starts raising for like 5 seconds to the maximum ... i want the ringtone volume to be at the maximum from the first second that someone calls me ... PS whats the musical note button on the left side of the mobile phone serve for ? when i press it a mp3 song starts playing but i have like three mp3 songs in the music folder and i can listen to just one
You can't change this....it's a safety feature. Actually I quite like it: it's much less antisocial since it lets you answer the phone before it annoys too many people......
Chris
6230i (the last bug-free Nokia?)
Vodafone UK contract since 1992 -
how do i change ringtone volume to ring with low volume first and then gradually increase to the max volume ? this feature was available before but is still available now ? this is for IOS8 running on Iphone 5c.
I've never been aware of a function like this in the past. You could create a personal ringtone that would last 30 seconds or less and set the volume on that ringtone to do that with an audio editor, such as Audacity.
-
How to upload the ringtone (transfer) from my normal computer to Iphone4. plz help me
Howdy sisku,
I've found another discussion has outlined this process.
How do I transfer a ringtone on itunes into a ringtone which my iPhone uses?
https://discussions.apple.com/thread/4713326
Cheers,
Allen -
Does anyone know how to prevent the YouTube volume from going up automatically? I keep my volume down and it increases automatically when I play a video.
Have you tried Windows Update in the Control Panel?
Many times it will find the newest supported drivers for Hardware.
Just be sure to install everything not just the Important ones.
Let us know if this helps. -
I have managed to sync a ringtone to my ne i phone 5C but the volume is way too soft.
The sound is great on my computer but hard to hear at all on the phone. I have tried turning up the volume button on the phone but it doesn' do anything for the ringtone. Any ideas on how to solve this problem. The ringtone is "calypso blackberry" and I am not able to locate it in the Apple store ringtones. This should be so simple and it is making me nuts.
Help anyone please.
BobSo you use an RCA cable going into what before it hits the MBP?
EDIT: Also in System Preferences > Sound > Input > you can select the input & adjust the volume accordingly as long as it's plugged in. -
Raising The Subwoofer Volume with 2.1 Speakers? (A Good EQ Should Do
Greetings, and happy New Year.
I've been trying to raise the volume of my subwoofer in my 2. speaker set up (2 satelites and a subwoffer). I'm using an Audigy 2 Value card. Now, when I open the Surround Mixer and go to Speaker Settings > Base Management, the subwoofer volume sliders are greyed out; the card doesn't seem to recognize the woofer. However, the woofer works fine with the computer- I can hear (er... feel) it just fine- but I can't seem to adjust the volume on it. How can I set up my sound card so it recognizes my woofer and so I can adjust its volume?
I tried raising the "Bass" slider in the surround mixer, but that also raises the Bass of the satelites, which I DON'T want- I only want the volume of the Bass in the woofer raised.
Many Thanks.
P.S. My subwoofer has a volume control on it, but its maxed out- if I could find an EQ that adjusted the 20-20 HZ range, I'd be in good shape, but I can't seem to. If anyone know of one, let me know. The EQ from the card only goes down to 20HZ, and I need to adjust lower frequencies.Message Edited by VermilionMartyr on 0-0-2006 08:6 PMMessage Edited by VermilionMartyr on 0-0-2006 08:27 PMJust set the audio to output stereo to full range speakers: go to configuration screen, select "show small/big icons", tap on the "audio" or "sound" icon. In the new screen that pops up, select "speakers" (that conexant device) and click "configure". Click next and you'll see an option to select "full range speakers", and select the front ones. Click next again and save the settings.
In that same audio tab, select preferences of the conexant device. In the new tab that opens, go to the 3D headphone setting and turn it off.
If you wish, you can also turn off the Dolby settings, they don't improve anything. -
E72: How to mute the loudspeaker volume when playi...
When I use the Media Player it seems to be playing MP3 not on a speaker, but on a
loudspeaker only.
How do I mute the loudspeaker volume when playing my MP3 recordings - basically what I need is to be able to play recordings on a speaker (but not on a loudspeaker, which is on a back side of the phone - next to camera) only.
ThanksI am not sure I understand. There are only two ways to play sounds on an E72, through the earpiece and through the speaker. Are you talking about a set of Bluetooth stereo speakers? I have never used anything like this, but maybe someone else can give a recommendation.
When the Music Player is running, I am also not aware of a mute key, although other Nokia phones may have this feature. I think sometimes the Talk Key has weird functions on some phones, but not on my E73. If you want to mute (or pause) playback, I have always done it the old fashioned way, by bringing Music Player to the front and pressing pause. -
How to delete the folder VOLUMES on the main drive?
Leopard creates a folder called Volumes on the root with aliases to external hard disks. I can delete the folder but as soon as I connect to the local network server, the folder Volumes appears again with an alias to the hard disk in the server. How do I permanently delete this folder? My Dock grid list is totally ruined by this folder. I was used to 5 folders on the root. Now it's six and I don't want that. I never had this annoying folder and I didnt do anything except for the 10.5.4 update. I also have no file or folder sharing active. The Volume folder also (re)appears when I connect an external USB disk. pls help
A problem I have with this folder is that although it is an alias, sometimes when I do file transfers (such as receiving large amounts of photographs via pando etc.), as well as downloading the file to the external drive, as I have instructed it, is stashes the same file in the "Volumes" folder, and over time it can really start to eat away at the disc space. (I only recently discovered this recently and was this able to free up about 12 GB of disk space). I am pretty sure this is abnormal behavior for this folder, but I don't have any idea where to look to find what the problem is. Any idea what might be causing this, and how I can stop it doing it? It isn't catastrophic, now that I know, because I can periodically go and clear it out, but the eroding disk space caused me lots of problems until I discovered that this is what was causing it.
-
How to copy the ringtone of my second pc to iPhone?
Hello, I tried to copy the ringtone of my pc to my friend's iPhone.
But when I try to sync, message appeared that if I perform this, all ringtones of my friend's iPhone will be replaced with my pc's ringtone.
There are already many ringtones in my friend's iPhone, how to solve this problem if he can't sync with his original pc.
Please help me.
Thank you so much.See this http://www.apple.com/icloud/setup/
-
EXIT_SAPLCORF_008 - how to raise the exception "PREDEC_NOT_CONFIRMED "
Hi,
I am using the user exit " EXIT_SAPLCORF_008 " to the check the previous activity is confimed or not.
so i want to raise the exception "PREDEC_NOT_CONFIRMED " , Because this exit comes under function module "CO_RU_CHECK_OPERATION ".
I am not able to raise the Exception . Plz guide me how to go ahead.
Exception List - CO_RU_CHECK_OPERATION
CONFIRMATION_NOT_ALLOWED Confirmation not allowed
NEW_STATUS_NOT_POSSIBLE Confirmation not possible because of status management
OPERATION_NOT_FOUND Operation not found
OPERATION_NOT_SELECTABLE Operation cannot be selected because of parameter setting
ORDER_DATA_MISSING Order data was not yet supplied
PREDEC_NOT_CONFIRMED Predecessor of operation not confirmed
PRT_LOCKED Production resource/tool is frozen.
Regards,
RaniHi,
I am using the user exit " EXIT_SAPLCORF_008 " to the check the previous activity is confimed or not.
so i want to raise the exception "PREDEC_NOT_CONFIRMED " , Because this exit comes under function module "CO_RU_CHECK_OPERATION ".
I am not able to raise the Exception . Plz guide me how to go ahead.
Exception List - CO_RU_CHECK_OPERATION
CONFIRMATION_NOT_ALLOWED Confirmation not allowed
NEW_STATUS_NOT_POSSIBLE Confirmation not possible because of status management
OPERATION_NOT_FOUND Operation not found
OPERATION_NOT_SELECTABLE Operation cannot be selected because of parameter setting
ORDER_DATA_MISSING Order data was not yet supplied
PREDEC_NOT_CONFIRMED Predecessor of operation not confirmed
PRT_LOCKED Production resource/tool is frozen.
Regards,
Rani -
[iphone]How to detect the system volume level?
I want to get the system volume level and use it for AudioQueueService.
How can I get the system volume level?There is a thread on this in the iphone development forum:
https://devforums.apple.com -
How to improve notification & ringtone volume?
Hello people,
I already saw in the forums that several People have the problem that the notification and ringtone volume is Very low, even when all the volumes are on max. And i didn,t see any solution to this problem. I already have the latest firmware version on my Phone, but icant seem to increase the volume.
Do you guys of sony have a solution for this? Don,t say that i'm the only person with this problem, because this entire forum is full of this problem.
Thank you and i'm waiting for your response.@iwondering1st - Given the details above this indicates that it is not.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
How to raise the default gain on Logic?
Hi guys!
Here is the issue... When i record something from my keyboard (i've tried a few and the same happens) on Logic i've got the sound on a really low level so everytime i have to adjust the db to raise the volume...
Is there a way to set a higher gain to the default recording?
I have the keyboard connected to the miniplug (microphone) and the Input on the System Preferences/Sound slider at max.
Thanks so much guys!
Cheers!You have to up the signal before it hits the Mac; so the volume on your Keyboard has to be upped.
What do you call a "really low level"? If you're recording at 24 bits (I hope you do) a "really low level" can actually be fine. What are the peak values (in dB) in the loudest parts? -
How to deactivate the Touch vibration in Nokia Lum...
How to deactivate the Touch vibration or keytouch vibration in Nokia Lumia 620 ?
THIS is applicable in your case too ..
Maybe you are looking for
-
when I commenced subscriptions for PhotoshopCC i was billed $19.99 per month. The advertised fee is now $9.99 per month for a single product. How do I change to the lower payment plan.?
-
CIN Pricing Procedure for Intercompany Billing Process
Hello All, Please suggest me what Pricing procedure I can use for Intercompany Billing for CIN. I have created a ZPricing Procedure coping the JINFAC but its for normal sales what CIN configuration I have to do for Intercompany billing. Please sugges
-
ITunes 11.1.3.8 Sync outlook with iPhone IOS7
Today I downloaded iTunes 11.1.3.8. The sync option of Outlook data (Windows 7) using this version of iTunes with my iPhone 4 on IOS6 works perfect. Question: Will this still work if I upgrade the iPhone software to IOS7 ? Thanks
-
Desktop capture and publish live in adobe AIR
Can anyone tell me how to capture user desktop or any application in AIR application and publish it with live streaming. For example: show powerpoint presentation live in AIR application. Is this possible in Adobe AIR and any adobe application? Thank
-
Reactivate software needed after Time Machine Restore?
So I'm getting ready to upgrade the HD in my MBP and I am going to try the time machine restore feature (hopefully) to reload the new HD to exact status of old HD. From what I've read this is pretty easy to do. What I can't find in my searches is if