How to re actived user SAP* after disable this account

hi guys,
i have some accident with my sap Portal, 
today i was install SAP EP with success, and then i try to create new user to change account sap*, but i forget give a new user to super user role .
my question is how to reactived user sap* ?
thanks for your support and advise
rgds
bahar

Hi Bahar,
have a look into the ume directory. There is a file called sapum.properties.bak.
Edit the file and check if the entry for ume.supersuer.activated (or similar) is set to true.
Rename the file to sapum.properties and restart the portal
Regards
Jochen

Similar Messages

  • How to get Active users list in Essbase 6.5.6

    Hi Gurus,
    How to get Active users list in Essbase 6.5.6 version
    I dont find any Esscmd to find active users list....
    i used LISTLOGINS command in ESSCMD but its not helping me out....
    pls suggest me some approach to find active users list.
    Thanks in advance....

    Hi  ,
    Display sessions will give only active users details which are currently connected to the ESSBASE .
    if you need this list ? or  you need the  total list of   security  active users list ?
    if you need the currently connected to the ESSBASE
    if you check  one server  At a time  or you can check the application level also
    1)server level
    display  session all;
    2)application level
    display session on application  'application name ';
    go for the  run command ---> essmsh----->  login;----->enter user name ----> enter password----->enter host (like server name )  then you need to you   above  1 &2  commands
    Thanks,
    suresh

  • How to know active user in Ad ? & how many days from not use user id ?

    How to know active user in Ad ? & how many days from not use user id ?
    Thanks & Regards, Amol . Amol Dhaygude

    Hi Amol,
    You can use the below command from the command prompt of DC to get all the AD users who are inactive for last
    X weeks,
                                    dsquery
    user -inactive X 
    To extract the inactive user information to a CSV file use the below command,
                   dsquery user -inactive X > c:\TestFolder\InactiveUsers.csv
    NOTE: The value
    X represents number of weeks, for example if your requirement is to find the inactive users for last 90 days then the
    X value should be 13.
    Regards,
    Gopi
    JiJi Technologies

  • HT3702 How do I remove My credit card from this account?

    How do I remove My credit card from this account?

    Go onto iTunes on your computer, on the right side of the home page of the iTunes store, click Account Information. Click the Edit button next to Payment Type. On the top of the screen, where it shows different types of credit cards (Mastercard, Visa, etc.) click None. Then scroll down and click Done. TA DA! Hope this helps!

  • Hi, I use two email addresses within one account with gmx.  I created one account with the first email address now. How do I add the second one to this account? Now it looks like this. One account was opened with address A. I receive in this account email

    Hi, I use two email addresses within one account with gmx.
    I created one account with the first email address now. How do I add the second one to this account?
    Now it looks like this.
    One account was opened with address A.
    I receive in this account emails for address A and B.
    But I can only write and answer with address A.

    Hi Rudegar,
    Sorry for my late reply.
    It s not the amount of accounts I'm struggling with.
    When I create now for both email addresses one account, then I receive the same emails two times.
    That is not what I want.
    Because on gmx the two email addresses have the same inbox and outbox.
    E.g. I can login to my gmx account either with email A or B. It doesn't matter.
    Now I want to have the same on my ipad.
    One account with both email addresses.

  • How to change computer user name after installing a new hard drive on my computer. HELP

    TO WHOMEVER CAN HELP ME: 
    How do I change my computer user name after HP installed a new hard drive on my computer.  Now it is called TEST??  So on my C drive instead of saying my name it says TEST.  Please help???
    Thanks in advance for any help I can get.
    Christina   

    Hi, Christina:
    Go to the control panel and then to user accounts. Select the Change Your Account Name option. Change the account name from Test to Christina.
    That should do it for you.
    Paul

  • How to submit "active users" standard report using shell scripting

    Hi All,
    Greetings.
    I want to submit the "Active Users" standard report in Sysadmin responsibility using a shell script.
    I also want to pass a parameter named email to this..
    can anyone help me do this?
    Thanks in Advance,
    Bhaskar

    Hi Bhaskar,
    You can achieve this by shell scripting either by scripting via CONCSUB utility (invoked from OS) or you can use the FND_SUBMIT package (through PL/SQL package), and in the script itself you can create the outputs or any hardcode messages to a file, and then mail the output to your desired mail address.
    If you use mail or mailx command using the OS utility then you can even send mail to external users which should not necessarily be a registered EBS users.
    Google, Forum Search and metalink will provide you loads of articles on how to use CONCSUB and FND_SUBMIT packages.
    Thanks &
    Best Regards,

  • HT5637 How to delete songs from phone after disabling match

    I have songs with a cloud next to them that I cannot delete from my phone.   I had match on but have disabled it.  When I swipe the song with the cloud icon, nothing happens.  When I download it by touching the cloud, it downloads.  When I swipe again, I get the delete button.  When I click the button, the song plays but does not go away.  When I sync with my pc, the song does not show in the library.  How do I get it off my phone?

    Hi garyfromsouth egremont,
    Welcome to the Support Communities!
    The variable that has changed with iOS 7 is the "Show All Music" option in Settings > iTunes & App Store. This feature displays your iTunes in the Cloud purchases on your device (while they are not locally stored). You can identify these by the "cloud download" icon on the right.
    To hide your iTunes in the Cloud purchases, disable this feature in Settings > iTunes & App Store.
    Playlists - iPhone
    http://help.apple.com/iphone/7/#/iph3cf20cbf
    Remove a song from iPhone. Tap Songs, swipe the song, then tap Delete. The song is deleted from iPhone, but not from your iTunes library on your Mac or PC, or from iCloud.
    Cheers,
    - Judy

  • No User SAP* after the creation of a new client

    Hello,
    I made a system copy from PROD to DEV-System and upgraded the DEV-System to EHP7. Now I want to create a new customizing client but when I create the client in transaction SCC4 there is no user sap* on this client. I never thought this is possible.
    I checked my profile and everythings seems to be fine. (login/no_automatic_user_sapstar = 0)
    The client is in the table T000. I searched for any users in this client on SQL but there is no User:
    Can you please help me with this issue?
    Thanks a lot and regards,
    Bernhard

    Hi Bernhard,
    Parameter login/no_automatic_user_sapstar = 0 enables the SAP*(basically from SAP Kernel/hard-coded) for initial logon to the newly created client. Please do the client copy from 000/001 for super user (SAP* and DDIC) availability.
    for further info please check this notes
    2383 - Documentation: description of "super user" SAP*
    68048 - Deactivating the automatic SAP* user
    regards
    kartik

  • How to get active user data using vba code in excel

    Start with this script: http://community.spiceworks.com/scripts/show/1572-list-user-info-in-excel
    Then add an extra line to get the msDS-UserAccountDisabled attribute, or test for it in an If/Else block.

    Could you please help me to get only active user details from active directory using vba code.
    Any help would be immensely appreciated.
    Thanks in advance
    This topic first appeared in the Spiceworks Community

  • How to recover backup user data after a restore

    I had a disk fail and could not boot. while in the restore software I was able to backup user data to a USB drive. Now that I've restored from the restore partition and got it running windows 7 home again, I don;t see how to recover the user data made with the low level software. Windows back up doesn't seem to recognise it and I can't find an HP utility to get at it.
    A program saved with the .wim back up files brought up an HP restore manager application that then copied the filed to my new C drive but how do I actually get it to recover them into their appropriate places and recreate users etc.
    Or, should I just consider myself lucky to still have copies of the files at all?  I'll not be real happy about that because it will be a tom of work to recreate everything manually even with the files.
    I'm hoping someone out there has a better solution for recovering all my user data into my new restored initial image.
    thanks,
    -dcb

    Hello dcbrower, You may be able to use the program Universal Extractor to extract the files in the .wim file.
    This is a Free program that can be found at this  Link. .
    Just extract the files in the wim file to a location you would like.
    Please click the White Kudos star on the left, to say thanks.
    Please mark Accept As Solution if it solves your problem.

  • How to get windows user identity after deploying code in IIS6.1

    Hi,
    In my asp.net application I have to get windows user identity. My backend is oracle.
    I set the windows authentication mode and impersonate to true. But still I'm not getting the actual windows user name.
    Please tell me how to get it.
    k.Bhaskar.

    Hello,
    For this kind of issue please consult on IIS forum:
    http://forums.iis.net/
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Missing User Field in Disable Individual Accounts section

    We are running on Vibe 3.4.0 build 2835. We have a couple of issues here that has to do with managing users in Vibe. We use LDAP to populate our user accounts in Vibe. Being in a university, our users come and go a lot. They get disabled and re-enabled in eDirectory. When a user gets disabled in eDirectory, they get disabled in Vibe too. When the user comes back and is re-enabled in eDirectory, their account in Vibe does not automatically get re-enabled. I have to go into "User Accounts" in the "Administration Console", select the "Disable/Delete Accounts" tab, locate the disabled user and check the box beside the disabled user, scroll all the way down the list and hit the "Enable Selected Accounts" button. We ask the enabled user to try and login to Vibe and they get a "login failed" error message, even when I do a search of the user in Vibe and their account shows up. This is problem 1. So, next thing I do is to delete the user so I can re-synchronize the user back into Vibe through LDAP sync. The Vibe 3.4 Administration Guide (page 177, Deleting Individual Accounts, item 6) indicates that there is supposed to be a User Field where I can type in the name of the user and I would be able to select the user from the drop-down list that is supposed to appear. I do not see this "User Field" where I can type in the user's name. This is problem 2. So, I end up having to go to the "Select From All Accounts" section, go from page to page until I find the user to delete. Deleting a user in Vibe takes such a long time for us because we have thousands of users and it takes very long to go from one page to the next to get to a user who's first name is towards the end of the alphabet. If the "User Field" existed as the guide indicated, then it would not be such a big deal to delete a user. Even better, if the account were re-enabled in Vibe and the user is able to use it. Or even much better if the user's account in eDirectory were enabled and the account in Vibe were automatically enabled when an LDAP sync is executed. Would appreciate any information in getting this process of re-enabling users in Vibe working better for us, and help in getting the missing User Field to show up. By the way, I've tried this on Chrome, IE, and FireFox and everything I've described here works the same way on the different browsers, including the missing field.
    Thanks,
    Ronnie

    sarnor,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://www.novell.com/support and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Forums Team
    http://forums.novell.com

  • Rules are disabled after disabling/enabling account.

    Hi,
    I have an applescript that enables or disables my work account depending on whether or not I have a VPN connection. My problem occurs when:
    1. The work account is disabled
    2. Mail is restarted
    3. The work account is enabled again
    At this point all of my rules associated with the work account are disabled. I can't imagine that this is the intended behavior.
    I can re-enable all of the rules with Applescript, but it seems like I shouldn't have to.
    The problem can be reproduced without using Applescript by disabling/enabling the account in Mail preferences.

    A little more info on the subject of rules, monitors, and alerting:
    Alerts based off of Rules will not close themselves, they will always need to be closed manually. If they were alerts based off of Monitors they would (in most cases) close themselves after disabling them. If you don't want to script closing the alerts based
    off the rules you can always filter or sort your alerts in the console and select all or selectively select the ones you want to close all at once and then right click and close the alerts based off rules. One other thing, for alerts based off monitors
    it is usually best to reset the health of an object and let the monitor close itself rather than close an alert based of a monitor if you have a need to close it. That is unless something funky happened where the health of the object changed to healthy
    and for some reason the alert didn't close in which case you can close it. The reason you dont want to just close an alert based off a monitor is because it wont reset the health of the object being monitored and will therefore not re-alert if the issue returns.

  • How to put another user on to my itunes account

    how do i put different users on to my itunes account as there's of us and all sharing same user so can read eachothers messages etc so wanted to see if could make them more private? many thanks

    Use seperate Apple ID's for iCloud and all use the same one for iTunes.

Maybe you are looking for