How to re-assign the query to a workbook after changes.

Hi Experts,
I have  added new variables to the selection screen of a Query.
This query is also being used in some workbook.
How can i reflect this change in Selection variables to Workbook also.
When i re-assign the data-provider to the report, it restores the default layout of query.
The changes of workbook are lost.
How can the changes in query be reflected in Workbook, without having to create the workbook again.
Any pointers on this would be helpful.
Thanks in advance.
Ashmita

Delegation is also a standard workflow administration functionality; it is not specific to MDG. There is a "substitution" button in the workflow inbox that a user can setup. When people leave on vacation, they should set it up. When they leave the company, I would this delegation will be one of the last things on their minds. That's where Workflow Admin delegation is needed: transaction RMPS_SET_SUBSTITUTE.
As far as escalation, there is a "reminder" that you can set in the rule-based BRF+ decision table. However, it is very limited and only goes to the responsible person him-/herself. For real escalation to a manager or another support group, you will need to build a completely new custom workflow template that includes your escalation rules or at least a "sub-workflow" template that you can call from within the standard rule-based workflow template.

Similar Messages

  • In ST03 , how can i see the Query name, user id,how many times executed the

    HI Experts,
    In ST03 , how can i see the Query name, user id,how many times executed the query.
    these details how do i get from the above transaction.
    EX:-if there is one report name X,I want to know how many users had executed X report today,weekly,monthly.
    ex:-query userid total number of execution
    sales order 0000555 5 times
    custmer 05855 2 times
    fast reply will be appreciated,

    Hi,
    Look here:
    http://help.sap.com/saphelp_nw04/helpdata/en/3b/54df4204892a78e10000000a155106/frameset.htm
    Also check these:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/2d/b8be3befaefc75e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/25/ece73a39e74d27e10000000a114084/frameset.htm
    Hope this helps..
    Bye
    Dinesh

  • In ST03 , how can i see the Query name, user id,how many times .

    HI Experts,
    In ST03 , how can i see the Query name, user id,how many times executed the query.
    these details how do i get from the above transaction.
    Points will be awarded.
    BR
    sivs

    Hi Siva,
    Reporting statistics data is only written to the database table if BW statistics have been manually activated for the corresponding InfoProvider first. If this has not been done, it is therefore not possible to display any reporting statistics in transaction ST03.
    Therefore activate the reporting statistics for all relevant InfoProviders. To do this, set the OLAP flag in the BW Administrator Workbench (transaction RSA1) in the area Tools ® BW Statistics for InfoProvider.
                    Check here...........
    http://help.sap.com/saphelp_nw04/helpdata/en/ca/86df4254d81e1fe10000000a155106/content.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
    Hope this will help you shiva.........
    Regrads,
    Vijay

  • How to find out the query is accessing the DB tables or not

    Hi Gurus ,
    How to find out the query is accessing the DB tables or not.
    Where exactly we will find this information in SAP BW.
    I know that this information we can find in ST03. But where exactly we will find the query information along with DB information?

    Lakshmi
    Activate BI Technical Content for Query analysis and run query against that.
    Hope this helps
    Thanks
    sat

  • How can I rearrange the pages in a PDF without changing the assigned paged numbers.

    How can I rearrange the pages in a PDF without changing the assigned paged numbers? These correspond to the original document folio numbers.

    In theory it would be possible to 'record and play back' the page numbers using a folder-level script, but it's far from trivial. You would have to use the doc.movePage() function - presumably driven by a dialog box - to do the page shuffling so there was a way to track what was being done, then swap the page 'labels' of the two affected pages. That's where it gets messy.
    We have functions in the JSAPI which can read and write the page label, but they don't do things in a logical way. The 'getPageLabel()' function simply returns a string, but the 'setPageLabel()' method expects to be told the numbering scheme, prefix, etc. You'd have to parse the string and work out what scheme it was implementing.

  • How we can assign the customised selection screen to report category

    hai
    gurus
    how we can assign the customised selection screen to report category

    Hi Naresh,
    You can do like this.
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    SELECTION-SCREEN BEGIN OF BLOCK SELECTION WITH FRAME.
    SELECT-OPTIONS: S_FKART FOR VBRK-FKART.
    SELECT-OPTIONS: S_FKDAT FOR VBRK-FKDAT OBLIGATORY.
    SELECT-OPTIONS: S_VBELN FOR VBAK-VBELN.
    SELECT-OPTIONS: S_AUART FOR VBAK-AUART.
    SELECTION-SCREEN END OF BLOCK SELECTION.
    SELECTION-SCREEN END OF BLOCK B1.
    if you give me brief i can help you out more.
    Thank you .
    Regards
    Ram

  • Assigning the query (sqvi) to other ID

    Dear all
    wht are the procrdure for assigning the query (sqvi) to other ID.?
    I have created one query from my ID now i want to assign this query to user ID..

    Dear,
    You cannot assign the Quick View to other user. You need to create a query using the quick view which you created,
    Please follow the steps below.
    You need to create "user group" using transaction "SQ03", first assign your userid to the group and activate check box to have Create/Change authorisation. Now below your name assign the userid who will be using this query.
    Now use transaction SQ01, once you are in the transaction please check whether your are into the "user group" which you created, if not use Shift+F7 to select the user group which you created.
    Now use menu Query-->Convert quick view, a popup screen comes, in that you type the Quick View name which you created in SQVI and your userid or the ID which was used to create. Now you type the new Query Name and Functional area.
    Now your query is ready to be used by users assigned in the user group.
    Hope it will help you.
    Regards,
    R.Brahmankar

  • How can i assign the Transaction varient to the user in 4.6C version

    How can i assign the Transaction varients n Screen Varients  to the users in 4.6C version.
       Actually Iam using T-code SHD0 for hiding the field in VA11 transaction. In this iam created one transaction varient n one Screen varient.iam not able to activate that screen varient and iwant to assing to perticular users. But i have a option in 4.7 above version my client is using 4.6C version. Please give me the solution as need full.

    Hi,
         Use the PPM toolkit class CL_CRM_PPM_UM_TOOLKIT. You can use the method You can use the method GET_ASSIGNMENTS_OF_USER which returns positions held by an user(user name).  You may also find the method GET_POSITION_OF_USER useful. It accepts username and the organization ID and will return the positions held by the user under that organization.
      This class always uses the current plan (01). If you want otherwise, you can use the FM RH_STRUC_GET. As to how this FM should be used, look inside the above said methods.
    Regards,
    Arun Prakash
    Edited by: Arun Prakash Karuppanan on May 11, 2010 11:40 AM

  • How to check query is getting reused after changing parametr cursor_sharing

    Hello,
    Oracle Version: 11g
    OS Version: Windows 2003 64Bit
    How to find if a particular query is getting reused after change in a cursor_sharing parameter from EXACT to SIMILAR.
    Which set of Views/DD's should i query go get the relevant details.
    Thanks in advance.
    -Vijay.

    SQL> desc v$sqlarea
    Name                                                  Null?    Type
    SQL_TEXT                                                       VARCHAR2(1000)
    SQL_FULLTEXT                                                   CLOB
    SQL_ID                                                         VARCHAR2(13)
    SHARABLE_MEM                                                   NUMBER
    PERSISTENT_MEM                                                 NUMBER
    RUNTIME_MEM                                                    NUMBER
    SORTS                                                          NUMBER
    VERSION_COUNT                                                  NUMBER
    LOADED_VERSIONS                                                NUMBER
    OPEN_VERSIONS                                                  NUMBER
    USERS_OPENING                                                  NUMBER
    FETCHES                                                        NUMBER
    EXECUTIONS                                                     NUMBER
    PX_SERVERS_EXECUTIONS                                          NUMBER
    END_OF_FETCH_COUNT                                             NUMBER
    USERS_EXECUTING                                                NUMBER
    LOADS                                                          NUMBER
    FIRST_LOAD_TIME                                                VARCHAR2(19)
    INVALIDATIONS                                                  NUMBER
    PARSE_CALLS                                                    NUMBER
    DISK_READS                                                     NUMBER
    DIRECT_WRITES                                                  NUMBER
    BUFFER_GETS                                                    NUMBER
    APPLICATION_WAIT_TIME                                          NUMBER
    CONCURRENCY_WAIT_TIME                                          NUMBER
    CLUSTER_WAIT_TIME                                              NUMBER
    USER_IO_WAIT_TIME                                              NUMBER
    PLSQL_EXEC_TIME                                                NUMBER
    JAVA_EXEC_TIME                                                 NUMBER
    ROWS_PROCESSED                                                 NUMBER
    COMMAND_TYPE                                                   NUMBER
    OPTIMIZER_MODE                                                 VARCHAR2(10)
    OPTIMIZER_COST                                                 NUMBER
    OPTIMIZER_ENV                                                  RAW(797)
    OPTIMIZER_ENV_HASH_VALUE                                       NUMBER
    PARSING_USER_ID                                                NUMBER
    PARSING_SCHEMA_ID                                              NUMBER
    PARSING_SCHEMA_NAME                                            VARCHAR2(30)
    KEPT_VERSIONS                                                  NUMBER
    ADDRESS                                                        RAW(4)
    HASH_VALUE                                                     NUMBER
    OLD_HASH_VALUE                                                 NUMBER
    PLAN_HASH_VALUE                                                NUMBER
    MODULE                                                         VARCHAR2(64)
    MODULE_HASH                                                    NUMBER
    ACTION                                                         VARCHAR2(64)
    ACTION_HASH                                                    NUMBER
    SERIALIZABLE_ABORTS                                            NUMBER
    OUTLINE_CATEGORY                                               VARCHAR2(64)
    CPU_TIME                                                       NUMBER
    ELAPSED_TIME                                                   NUMBER
    OUTLINE_SID                                                    VARCHAR2(40)
    LAST_ACTIVE_CHILD_ADDRESS                                      RAW(4)
    REMOTE                                                         VARCHAR2(1)
    OBJECT_STATUS                                                  VARCHAR2(19)
    LITERAL_HASH_VALUE                                             NUMBER
    LAST_LOAD_TIME                                                 DATE
    IS_OBSOLETE                                                    VARCHAR2(1)
    CHILD_LATCH                                                    NUMBER
    SQL_PROFILE                                                    VARCHAR2(64)
    PROGRAM_ID                                                     NUMBER
    PROGRAM_LINE#                                                  NUMBER
    EXACT_MATCHING_SIGNATURE                                       NUMBER
    FORCE_MATCHING_SIGNATURE                                       NUMBER
    LAST_ACTIVE_TIME                                               DATE
    BIND_DATA                                                      RAW(2000)

  • How do I recover the music I have purchased after a Windows disaster?

    How do I recover the music I have purchased after a Windows disaster? Windows on this computer stopped working correctly. I was told by HP support that the registry was corrupted and that I had to re-install Windows and programs from CDs that came with the computer. I did this and Windows started working correctly again. The only trouble is that all of the music I bought is gone. How do I recover the music I have purchased from iTunes after a Windows disaster and after re-installing Windows?
    Please tell me that you know about all of my song purchases and that there is a way I can download all of these to this computer again without having to pay for them again.
    I have learned my lesson about Windows. In the short run I plan to buy a backup drive that I can plug into this computer that I can restore from if and when something like this happens to Windows again. In the long run I plan to buy an Apple computer the next time I buy a computer.

    You could try contacting the iTunes Music Store Customer Service and you may be able to persuade them to sanction a second free download however they are not under any obligation to do so. The policy on lost songs is that you have to pay to download them again:
    "Once a Product is purchased and you receive the Product, it is your responsibility not to lose, destroy, or damage the Product, and Apple shall be without liability to you in the event of any loss, destruction, or damage."
    You can email them from any of the links on this page: iTMS Customer Service

  • How do I get the iPad to work again after I have erased data (intentionally) and do not have my base computer to plug into to access itunes?

    How do I get the iPad to work again after I have erased data (intentionally) and do not have my base computer to plug into to access itunes?

    If you have iOS 5 installed on it, you don't need a PC.  simply turn it on and set it up.
    if you don't have iOS 5 then you'll need a computer.

  • How do i recovery the apps to my phone after transferring apps from my iphone?

    how do i recovery the apps to my phone after transferring apps from my iphone?

    If you've download apps from the iTunes app store then you can only install them on an iPad, iPhone, or iPod Touch, you can't use them on a computer (PC or Mac)

  • How do I get the Blackberry symbol to show after I send a text message?

    How do I get the Blackberry symbol to show after I send a text message?

    Hi and welcome to the forums!
    Create an AutoText entry
    1. In the device options, click AutoText.
    2. Click the trackwheel.
    3. Click New.
    4. In the Replace field, type the text to replace.
    5. In the With field, perform one of the following actions:
    • Type replacement text.
    • To insert a macro (for example, the current date or time), click the trackwheel. Click Insert Macro.
    6. In the Using field, perform one of the following actions:
    • To capitalize the entry exactly as you typed it, click Specified Case.
    • To capitalize the entry according to the context, click SmartCase.
    7. Set the language.
    8. Click the trackwheel.
    9. Click Save.
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • How can I set the guests to auto start after the primary reboots?

    For version 1.2 of LDOM software, how do I set the guests to automatically start after I reboot the primary? Right now if I do this:
    ldm stop -f guest1
    reboot primary
    guest1 will be bound and manually started with ldm start
    ldmd is set to start at boot.
    Thanks, Kevin

    Try running ldm set-var auto-boot\?=true guest1This will set the LDOM guest openboot parameter "auto-boot" to true and it should boot automatically when the Primary restarts.
    Steve

  • How can I remove the app from my computer after I removed it from my iPhone 5?

    How can I remove the app from my computer after I remove it from my iphone5? I plug in my phone and it shows all the apps I've deleted still on the computer. tnx.

    Open the iTunes app on your computer, highlight the Apps in the left column, right click over the icons of the apps that you wish to delete and choose Delete.

Maybe you are looking for