How to re-center window positions

Hi folks,
I switched from 19" to a 27" screen. How can I tell LR to re-center it's window positions?
The windos (like the Export window) are still on the old place (centered for 19").
BRGDS!

Just drag the top menu bar for either Lightroom or the Menu window. Or the bottom corner.
I'm not sure what you are after though or where you are startibng from.........

Similar Messages

How to decide new window position?

Hi
I work a lot in Logic Pro X, but I think this question belongs in the Maverick OSX department.
Every time I open a plug-in window in Logic it defaults to the position in the upper left corner of my cinema display, forcing me to drag the window in center, where I can view best.
How can I tell the system that I want's the window to open in the center of the display and not in the upper left corner?
I have the same problem with Preview!
I go nuts to be forced to do the same thing over and over again!!!!

Hello,
You may disable the options for tab and new window in browser setting. For IE, Go to Tools-> Internet Options->General
Check the settings under tab section
In order to have the settings at global level, please check with network admin to disable the setting for all users.

How do I center my slide in the window in keynote

how do I center my slide in the window in keynote?
I know I can fit to window, but can I have the slide smaller than my window and centered?
It stays in the upper left hand corner.

You don't say, but I'll assume you mean that this occurs when Keynote is in "edit" mode. The positioning of the slide boundaries snug to the upper left is fixed in Keynote and can't be changed.
Many have looked for ways to add new objects, images, etc., coming from above and/or from the left off-slide. This can be done with some creative steps.
The simplest solution to this is to attach (group) an "invisible" handle to the object and use the handle to move the object out of sight to the left or above. Create an object such as a narrow rectangle, assign it NO FILL, NO LINE and while it is selected, Shift-Click on the object you wish to hide and then Arrange > Group. Now you have an invisible handle that you can use to hide your object off-slide.

How can i lock the position and size of all of my .app windows?

I have had this problem for a few months now; I would size the window of one of my apps (lets use safari for example) exactly the size i want it, then i position it exactly in the center of my screen because I'm OCD like that, then I'm just browsing the internet and i accidentally move the window so then i have to move it back. Sometimes it gets even worse and for whatever reason, my cursor is down in the lower right part of my window and i accidentally size it, then i have to go back and resize it to where it was. Please help me! there has to be a way to lock my windows positions and sizes! is there a widget or a program out there that can save my life?! Thanks haha

AFAIK, there isn't. All I can suggest is that you quit clicking and dragging the cursor. Use the arrow keys to scroll up and down. I don't have a laptop, but there might be a trackpad setting for the various swipe stuff that comes with them.

How Do I Reset The Finder Windows Positions?

Hi,
I would like to "reset my finder windows positions". Anyone knows how I can do that?
Thanks.
Ed

So I cannot edit the .DS_Store file?
You can try, as I do not know how good you are at working with binary files. When I try to edit a .DS_Store on my system I see:
^@^@^@^ABud1^@^@p^@^@^@^H^@^@^@p^@^@^@^P^L^@^@h^K^@^@
lots and lots of ^@ with occasional other characters mixed in.
So what will it happen if I delete the .DS_Store file? Will my iMac's all Finder Windows be reseted?
The Finder will forget information about that Folder. Where it is positioned on the screen, how the files in the folder are arranged, etc...
If you are concerned, create an experimental folder, put some junk files in the folder (stuff you can delete later). Arrange things in the experimental folder, play with the size of the experimental folder.
Now delete the .DS_Store for that file. See what happens in a safe experimental way. If you like the results, apply the same to folders you want to reset.
"for each Folder", what do you mean?
If you want to reset more than 1 folder, you would repeat the .DS_Store for each folder that you are interested in resetting.

HT204216 On Windows I used to hold the WINDOWS KEY plus the ARROW keys to manipulate window positions. How do I do that on Mountain Lion?

How does one manipultate windows via the keyboard.

This kind of functionality is not built into the OS. Specific applications may or may not do something like this, though I haven't seen it myself. I believe there are third party bits of software which add this kind of functionality to the OS. You might consider experimenting with the Universal Access preferences (in System Preferences) to enable some form of keyboard manipulation of the mouse which then could be used to move windows about.
charlie

How can I override the startup window position?

Can I override a compiled labview 7 app with ini settings, command line options, via a registry edit, or other option?
Thanks,
Mike

Hello Mike
Besides saving the vi in a position, you also have a property node to determine window position at startup app.
Values can be fix, calculated from monitor specs, etc.
See attached doc.
Hope it helps
Alipio
"Qod natura non dat, Salmantica non praestat"
Attachments:
origin.doc ‏35 KB

How can I make Mail window positions sticky?

One of the few good things about Windows is application windows always open in the same place every time. Why can't we have this with Apple Mail...it occurs with many other inherent Apple applications.
When I open a new message window in Apple Mail I don't want it to be in a different position every time I open it...I want it in the same spot each time (and want that position to be decided by me...I'm the one using the application). Forcing a window to open in the same position is basic programming, so this must be something intentionally done. Is there any way to fix it?
LarryMcJ
iMac 24 Mac OS X (10.4.8)

One of the few good things about Windows is
application windows always open in the same place
every time.
Pull the other one. (Or did I miss the smilies? ...
But back on track:
When I open a new message window in Apple Mail I
don't want it to be in a different position every
time I open it...I want it in the same spot each time
Hi
Mail is a document-based application (that is developer speak - never mind) that automatically stores the size and position of windows (at least it should).
BUT it differentiates between the type of windows you are using - example:
- Mine is configured to show no preview pane (just the sidebar with accounts and folders and the message list on the right)
- When I compose a message it opens in the exact same location where I had the last message composed and send (that is it stores size and position of the composition window)
- When I read a message it opens in the exact same location where I read the last message.
The two window positions can be different...
If this does not work for you then I suggest a look at the pref file for Apple Mail.
It lives in /User/[short user name]/Library/Preferences/ by the name com.apple.mail.plist.
You should only modify this file when Mail is NOT RUNNING. If I open several mail message windows and toss them around size and position get stored immediately in that file.
Unfortunately there is no way to store size and position in that file permanently - you could lock the file but this is not a good idea for Mail will complain about missing rights and stop working.
Cheers,
Walter

How to open a window in full screen mode using lf_fpm_navigation?

Hi Guys
For the following applications
ESS Application: HAP_START_PAGE_POWL_UI_ESS
MSS Application: HAP_START_PAGE_POWL_UI_MSS
When the user clicks on the appraisal document name, a seperate window(not full screen) is generated to display the Appraisal docuemnt.
The code is as follows:
COMP: HAP_START_PAGE_POWL_UI
Object : COMPONENTCONTROLLER
Method: FOLLOWUP_POWL
Generate the URL to be called.
    CALL METHOD cl_wd_utilities=>construct_wd_url
      EXPORTING
        application_name = 'HAP_MAIN_DOCUMENT'
        in_parameters    = lt_parameters
      IMPORTING
        out_local_url    = l_url.
    wd_this->url = l_url.
    wd_this->display_document( ).
In Method: DISPLAY_DOCUMENT
lv_alias = 'EMPLOYEE_DOCUMENT_UI_OBN'.
use FPM navigation
    ls_nav_key-key1 = 'HAP'.
    ls_nav_key-key2 = 'HAP_GENERIC_UI'.
    lr_fpm_navigation ?= lr_fpm->get_navigation( is_key = ls_nav_key iv_instance_sharing = abap_false ).
    CALL METHOD lr_fpm_navigation->get_key_from_alias
      EXPORTING
        iv_alias = lv_alias
      RECEIVING
        rv_key   = lv_key.
    lr_fpm_navigation->modify_parameters(
         EXPORTING
           id_target_key            = lv_key
           it_application_parameter = lt_appl_param
           it_business_parameter    = lt_business_param    ).
    lr_fpm_navigation->navigate( lv_key ).
Any idea how to open this window in full screen?
Highly appreciate your help.
Thank and Regards
Pramod

Hi Pramod,
This FPM navigation is achieved using settings made in Launchapd Customizing ( LPD_CUST ).
a) Execute Tran LPD_CUST
b) Go to Role HAP - Double Click to open it.
c) Open the second folder on the LHS menu - there you will find 2 entries
d) Click on second entry - in the entry setting you can see that it is configured for WD Application - HAP_MAIN_DOCUMENT
e) Click on button Show Advanced Parameters
f) There you will find a input box named as Window Features - here you can specify window features like
height=700,width=1100,position=center,menu=no,status=no,location=no,menubar=no,status=no,toolbar=no
save the settings come out and test ur app again.
change the height and width and other features as per ur req.
Regards
Manas Dua

How do I center and/or maximize the front panel on every event?

Hi,
So basically I have a little issue with trying to maximize and then scale back a VI's front panel every time a user selects a different option from a ring control.
So far i've been using the LVWINUTIL.LLB and the provided window size vi to set the size I want on ring selection change which works fine, but as far as centering the VI goes, the method I'm calling only works the first time. After it maximizes and I select a different option on my ring control which is linked to a case within a while loop it simply resizes to the size i set which is correct but when I got back to the ring case which is supposed to maximize the front panel again, it doesn't do it. Centralizing the FP also only works once.
I'm using FP.Run-Time Position.Centered to try and center the VI....only works once. I do understand that this might be the desired behavior since the name is run-time position meaning it'll only do this when the VI is first run, however I need this to happen more then once, how can i do this? Thanks...

How did you center the FP?
Their a method that should work time after time.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

How to show Popup window in OAF on click of a button

How to show Popup window in OAF on click of a button (Without using Javascript)
1. I have one OAF page on which i should have button Called "Next"
2. On clicking of this button a new window/page should be displayed with the image stored in database. on clicking on this "Next" button again next image from the database should be displayed on the newly opened window/page.
3. Is it possible to configure OAF to render window_II in the opposite screen of window_I where the OAF client resides? (If the OAF-client resides in screen_I render window with image in screen_II). That is, at the first click on the Next-button, window_II appers on screen_II and not some random location. The user will have 2 screen/monitors on his work place.
4. Given that the two windows reside on each screen, is it possible to make OAF remember the position of window_II ? The goal of this is to force the window to pop up on the same location on the same screen next time the Next-button is pressed.
5. If window_II is closed (eg. by using X) and the Next-button in window_I is pressed again, will window_II pop up in the same location and screen as previously ?
6. Is it possible to have a Print-button in window_I what prints the scanned picture in window_II ? Is it possible to have the click on this Print-button to open the standard print dialog on top of window_II ? Could the button be placed in window_II as well, having the same functionality ?

I have tried to open home page window. You can change the URL according to your requirement.
import oracle.apps.fnd.framework.webui.OAUrl;
StringBuffer l_buffer = new StringBuffer();
l_buffer.append("javascript:mywin = openWindow(top, '");
String url = "/OA_HTML/OA.jsp?OAFunc=OAHOMEPAGE"; // Calling Oracle Home Page
OAUrl popupUrl = new OAUrl(url, OAWebBeanConstants.ADD_BREAD_CRUMB_SAVE );
String strUrl = popupUrl.createURL(pageContext);
l_buffer.append(strUrl.toString());
l_buffer.append("', 'lovWindow', {width:750, height:550},false,'dialog',null);");
pageContext.putJavaScriptFunction("SomeName",l_buffer.toString());
Above code will open the new page in new window.
Thanks
--Anil

How to open a window on click of a button?

Hi,
I want to open a window(a new browser page) on the click of a button.Can anyone please tell me what i should write in the onAction of the button?
Regards,
Padmalatha.K

hi,
1.Declare the following in the implementaion of the component controller
//@@begin others
IWDWindow modalWindow;
//@@end
2.First create a method in the component controller :
public void createExternalWindow( )
    //@@begin createExternalWindow()
    // create external window
    IWDWindow externalWin = wdComponentAPI.getWindowManager().createNonModalExternalWindow
                                                        ("http://www.google.co.in/", "External");
    //Define window position and dimensions according to acreen parameters
    externalWin.setTitle("Google");
    externalWin.setWindowPosition(WDWindowPos.CENTER);
    externalWin.setWindowSize(1280,850);
    externalWin.show();
    //@@end
3.Create a button in the view, create an action. assign this action to the button . Now call the method in the view controller.
public void onActionexternal(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionexternal(ServerEvent)
    wdThis.wdGetPopUpCompController().createExternalWindow();
    //@@end
Now to create a modal window
1.Declare the following in the implementaion of the component controller
//@@begin others
IWDWindow modalWindow;
//@@end
2.Create a new window "NewPopWindow".Declare the following in the implementaion of the component controller.
public void createModalWindow( )
    //@@begin createModalWindow()
    //creating the window
    IWDWindowInfo winInfo = wdComponentAPI.getComponentInfo().findInWindows("NewPopWindow");
       modalWindow = wdComponentAPI.getWindowManager().createModalWindow(winInfo);
    //display window in centre
    modalWindow.setWindowPosition(WDWindowPos.CENTER);
    modalWindow.setTitle("Modal Window");
    modalWindow.setWindowSize(400,100);
    //opening the window
    modalWindow.show();
    //@@end
3. destroy the window
public void destroyModalWindow( )
    //@@begin destroyModalWindow()
    modalWindow.destroyInstance();
    //@@end
4.Create a button in the view, create an action. assign this action to the button . Now call the method in the view controller.
public void onActionmodal(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionmodal(ServerEvent)
   wdThis.wdGetPopUpCompController().createModalWindow();
    //@@end
regards,
pinki
Edited by: pinki goswami on Apr 17, 2008 11:42 AM

How do I center text in Final cut Pro?

Hi, does anyone know how to directly center text with more than one line of text in Final Cut Pro?
If I have more than one line it doesn't seem to center properly. I've tried wireframe (which is inaccurate), center values (which doesn't work) and Boris 3D (which does the job but the space between letters isn't accurate so I need to try an alternative method).
Any ideas?

In Title 3D you use the Position X/Y button to adjust the height. The spacing between the letters in Title 3D can be adjusted both in tracking and in kerning by placing the cursor between a letter pair. Title 3D is perhaps one of the most accurate and precise text positioning titlers available in any software.

How to create a window with its own window border other than the local system window border?

How to create a window with its own window border other than the local system window border?
For example, a border: a black line with a width 1 and then a transparent line with a width 5. Further inner, it is the content pane.
In JavaSE, there seems to have the paintComponent() method for the JFrame to realize the effect.

Not sure why your code is doing that. I usually use an ObjectProperty<Point2D> to hold the initial coordinates of the mouse press, and set it to null on a mouse release. That seems to avoid the dragging being confused by mouse interaction with other nodes.
import javafx.application.Application;
import javafx.application.Platform;
import javafx.beans.property.ObjectProperty;
import javafx.beans.property.SimpleObjectProperty;
import javafx.collections.FXCollections;
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.geometry.Point2D;
import javafx.geometry.Pos;
import javafx.scene.Node;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.scene.control.ChoiceBox;
import javafx.scene.input.MouseEvent;
import javafx.scene.layout.AnchorPane;
import javafx.scene.layout.StackPane;
import javafx.scene.layout.VBox;
import javafx.scene.paint.Color;
import javafx.stage.Stage;
import javafx.stage.StageStyle;
import javafx.stage.Window;
public class CustomBorderExample extends Application {
@Override
public void start(Stage primaryStage) {
AnchorPane root = new AnchorPane();
root.setStyle("-fx-border-color: black; -fx-border-width: 1px; ");
enableDragging(root);
StackPane mainContainer = new StackPane();
    AnchorPane.setTopAnchor(mainContainer, 5.0);
    AnchorPane.setLeftAnchor(mainContainer, 5.0);
    AnchorPane.setRightAnchor(mainContainer, 5.0);
    AnchorPane.setBottomAnchor(mainContainer, 5.0);
mainContainer.setStyle("-fx-background-color: aliceblue;");
root.getChildren().add(mainContainer);
primaryStage.initStyle(StageStyle.TRANSPARENT);
final ChoiceBox<String> choiceBox = new ChoiceBox<>(FXCollections.observableArrayList("Item 1", "Item 2", "Item 3"));
final Button closeButton = new Button("Close");
VBox vbox = new VBox(10);
vbox.setAlignment(Pos.CENTER);
vbox.getChildren().addAll(choiceBox, closeButton);
mainContainer.getChildren().add(vbox);
    closeButton.setOnAction(new EventHandler<ActionEvent>() {
      @Override
      public void handle(ActionEvent event) {
        Platform.exit();
primaryStage.setScene(new Scene(root, 300, 200, Color.TRANSPARENT));
primaryStage.show();
private void enableDragging(final Node n) {
   final ObjectProperty<Point2D> mouseAnchor = new SimpleObjectProperty<>(null);
   n.addEventHandler(MouseEvent.MOUSE_PRESSED, new EventHandler<MouseEvent>() {
      @Override
      public void handle(MouseEvent event) {
        mouseAnchor.set(new Point2D(event.getX(), event.getY()));
   n.addEventHandler(MouseEvent.MOUSE_RELEASED, new EventHandler<MouseEvent>() {
      @Override
      public void handle(MouseEvent event) {
        mouseAnchor.set(null);
   n.addEventHandler(MouseEvent.MOUSE_DRAGGED, new EventHandler<MouseEvent>() {
      @Override
      public void handle(MouseEvent event) {
        Point2D anchor = mouseAnchor.get();
        Scene scene = n.getScene();
        Window window = null ;
        if (scene != null) {
          window = scene.getWindow();
        if (anchor != null && window != null) {
          double deltaX = event.getX()-anchor.getX();
          double deltaY = event.getY()-anchor.getY();
          window.setX(window.getX()+deltaX);
          window.setY(window.getY()+deltaY);
public static void main(String[] args) {
launch(args);

How do you change the position of email sender so that it's on the left (sender[from], subject and date received)

How do you change the position of email sender so that it's on the left (sender[from], subject and date received)

In the Thread Pane where your messages are listed?
You see that bar with the labels "From", "Subject", "Date" and so on? Well, they are buttons. You can click on them to sort your messages. You can also drag them with the mouse left and right to reposition them, and you can drag their ends to change the column widths.
These are standard computer actions; you can do all of this in Windows Explorer ("My Computer") too.
In Thunderbird, a right-click on any of these buttons will reveal a pop-up menu where you can select and deselect the columns to control what is shown.
More here: http://www.ramsden.org.uk/8_How_to_sort.html

How to re-center window positions

Similar Messages

Maybe you are looking for