How to re-configure the actual Hotspot configuration/access information?

Hi,
how c/an I re-configure the acual HOTSPOT configuration/access information? [MBP Retina - late 2012 | OSx 10.8.2]
THX in advance,
NNIE

As you are using verzion DSL connection ….Try this setting on router:
1) Open router set up page using http://192.168.1.1 …..You will see username & password …leave username blank & in password use admin.
2) Under set up look for “mac address clone” sub-tab….. Enable the service & click clone ….click save settings.
3) Click on “status” tab….. if it shows any valid public Ip address try going online…..if it shows Internet Ip as 192.168.1.X. with gateway 192.168.1.1…then
a) Click set up again ….change the Local Ip address from 192.168.1.1 to 192.168.2.1….click save settings.
b) Power down the router then the modem for few seconds …..Power on the modem first …then the router & see you are online or not.
4) If the internet Ip address is 0.0.0.0…click on set up again …change internet connection type to PPPOE…use your DSL username & password …click save settings.
5) Click status & click connect…if shows connected try going online….if not let mw know the error message you are getting on the status screen.
Follow above steps & let me know if it helps or not.

Similar Messages

Hello. How do I keep the actual size of a photo when adding to a Keepsake? Used to do this but have forgotten how!

Hello. How do I keep the actual size of a photo when adding to a Keepsake? Used to do this but have forgotten how! Need help please!
T.

Here is my suggestion:
Open a blank, new file (File>new>blank file) size 8.5x11"
Open the collage
Go to Select>all
Go to Edit>copy
Go back to the blank file created in step #1
Go to Edit>paste. The collage will be on its own layer
Access the move tool, and with the corner handles resize the collage. Using the corner handles should preserve the aspect ratio. If you open the rulers, you will have a point of reference as you go along.
Print a draft copy to see if it will be suitable in the frame..
Please report back with your progress.

How can I edit the actual album info? (Get info won't let me)

How can I edit the actual album information. I recently loaded CD of duets, the artist name is correct, but doesn't show up on my artist listwithnstead its shown as a compilation by various artists. When I use "Get Info" the artist name is right on all the tracks but doesn't show the correct name on the actual album column. Anybody know how to fix this?
Thanks

Questions already been asked and answered, thanks to Turingtest2 for his wisdom.
richfromkeswick wrote:
How can I edit the actual album information. I recently loaded CD of duets, the artist name is correct, but doesn't show up on my artist listwithnstead its shown as a compilation by various artists. When I use "Get Info" the artist name is right on all the tracks but doesn't show the correct name on the actual album column. Anybody know how to fix this?
Thanks
Rich

How do I monitor the actual refresh of materialized view.

Hi See below,
I am creating the materialized view.
It took a while to see the actual data in the table. Do you any reason.
How do I, investigate, if there is any issue, how do I monitor the actual refresh.
I am worried since, it look long time to see the actual data, after creating the materialized view.
SQL> @"ee_grant_details_mview.sql.bkp"
Snapshot dropped.
Snapshot created.
SQL>
select count(*) from grant_details_mview;SQL>
COUNT(*)
0
SQL> select count(*) from grant_details_mview;
COUNT(*)
0
SQL> commit;
Commit complete.
SQL> select count(*) from grant_details_mview;
COUNT(*)
0
SQL> select count(*) from grant_details_mview;
COUNT(*)
0
SQL> select count(*) from grant_details_mview;
COUNT(*)
0
SQL> select count(*) from grant_details_mview;
COUNT(*)
0
SQL> select count(*) from grant_details_mview;
COUNT(*)
344466
SQL>

During the initial building of the materialized view, the data is not available to users until the refresh completes.
If you are talking about subsequent refreshes, you have a few options
- Can the materialized view be made fast refreshable?
- If not, can you put the materialized view be put into a refresh group? This will increase the time required to refresh, since Oracle would be deleting and inserting rather than truncating and inserting, but the old data will remain available for users until the refresh completes.
Note that the Replication or Database - General forums might be more appropriate for this sort of question. You may want to move further discussion to one of those forums.
Justin

How can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

how can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

If you have an RS-232 interface to the digital video recorder, it may be that you can send a command to the video recorder in order to get the time code sent back to your application - you would then read this as a string and then incorporate this data into your program.
The best source of help will be any documentation you have relating to the serial (RS-232) interface with the digital video recorder. This documentation should have commands that you can send to the recorder and expected response strings that you should get back from the device. This task should be straightforward but can often be frustrating without documentation about the video recorder. This will not be something that you can "guess" - past experience in writing serial communication ap
plications has shown that a good manual is your best friend.
Failing this if you have any source code for example programs that have already been written to communicate with the recorder, you might be able to extract the relevant ASCII strings and use them within your application. This is true whether you are using LabVIEW or a text-based language.
Jeremy

I purchaised MPV's Core Numbers '09 101 software online yesterday. The software only shows the toutorial, and I couldn't find the actual spread sheet. I have taken a long time watching the toutorial. Please help me on how I can find the actual program.

I purchaised MPV's Core Numbers '09 101 software online yesterday. The software only shows the toutorial, and I couldn't find the actual spread sheet. I have taken a long time watching the toutorial. Please help me on how I can find the actual spread sheet to work on. Thank you in advance

Visit the developer site for help.
https://www.appomator.com/support/

I just finished downloading the adobe premiere trial, but how do i open the actual thing now ?

i just finished downloading the adobe premiere trial, but how do i open the actual thing now ?

Which operating system are you using? For Windows you go to Start>All Programs for Mac OS it is located in your Applications folder.

How can i validate the field directline under personal information of ESS?

Hi all,
How can i validate the field directline under personal information--> communication data of ESS?The thing is we don't have NWDI setup in our organization.Is there any possibility of doing it under SPRO trn.
Thanks and Regards,
sam

Hi,
This is probably a wrong forum that you have posted your question to.
Regards,
Siddhesh

How do I get the Speech function for accessibility to work in the Windows 8 version?

How do I get the Speech function for accessibility to work in the Windows 8 version? There is no "File" option where you would normally find it. I tried using Narrator from Windows however it cannot read "explorable text" I guess

Adobe Reader Touch (Windows Store app with "modern" UI) is not really accessible.
If you have a device running the Windows 8 operating system (as opposed to the Windows RT operating system), you can install and run Adobe Reader XI (desktop app with classic UI), which offers better accessibility support for screen readers. It also has the "Read Out Loud" functionality.

(264361962) Q ADVC-27 How do you pass the security info to access the EJB?

Q<ADVC-27> How do you pass the security info to access the EJB?
A<ADVC-27> Authentication for web service users must occur at the web layer. This
means providing appropriate web resource definitions and restrictions in the web.xml
file for your project. The most common and useful form of security for application
interaction is via client-side certificates. Then the client identity is transmitted
to the EJB is the same way as in regular J2EE environments. There is a complete description
on security on e-docs:
http://edocs.bea.com/workshop/docs70/help/guide/security/ovwSecurity.html
Adam

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(119093)

How can i test the actual app on my devices?

     First off let me start by saying that i would post on the actual dev forums but it takes forever to get an answer on them. Id also like to point out that im new to the apple dev center and testing apps on my actual device as i just got my dev account today.
     Anyways, ive figured out how to run the app on my phone itself with a cable after much trial and error. The way im currently doing it is by going to the app settings in xcode then selecting build settings and then finding where it says debug and release then selecting the profiles and stuff there, i feel this is the incorrect way to do it but it worked. Ive tried to read the written tutorials on apple's dev site but i get lost and confused. So am i doing this right for a wired connection to test it on my iPhone or not?
     My second part of this is the video tutorials ive been watching on how to do it and in a lot of documents ive been reading i always pass by a part about wirelessly doing this, basically without a cable or anything. Ive done a lot of searching for it and found nothing related to it or atleast that was helpful.
     Something im also confused on and itd help is can somone explain to me in non technical meaning but descriptive ways of what all these mean:
this is whats in the dev center i mean i know what the devices is and how to add them but i dont really have a solid understanding of what provisioning profiles, the identifers or the certificates do, so itd help if you could tell me what each one means/does.
     Something else that ive been reading and seeing in video tutorials is that you can send an app in xcode or something to one of your developers apps on your dev account, this would be useful for me to send to my family and friends so that they can see the app and use it and tell me what i should do/work on with the app.
     Once again like i said im new to developing with xcode and developing in general and im still leaning so bear with me if i asked a lot of questions or im talking to much . Also itd be great if you didnt talk so technical when responding it can help me out like 100% more!

iBooks only syncs purchased books. Others must be synced in iTunes.

How can I compare the actual and expected values in Unit testing when they are XML files?

I have created a unit test for a method in VS 2008. My expected value and actual value are XMLs. Therefore though the output is same as I expect it gives an error as I am doing string comparison now. How can I compare these 2 XMLs in expected output and
actual output format in Unit Testing?
mayooran99

In unit test, when you want to validate XML files, you feed them into the class / struct that you want to feed the XML into and compare the values there (You don't just feed it in XMLReader and feed it line by line, right? But if it really is, that's how
you should also test it in unit tests).
In short, how you'd use the XML in your code, that's how you should test it in unit test.

How do I find the actual size of an app? Example: a wallpaper app claims the size of 4.4 MB, but the size on my iPhone is 4.9 GB!

Some of the apps on my iPhone are much larger size-wise than claimed on their app page. Example: Wallpapers HD claims 4.4 MB, but the actual size on my phone is 4.9 GB! Pinterest & Facebook also end up being huge real estate hogs. How do I really know the size of an app? The apps don't represent themselves accurately in the app store.
I figured out that 2 of my podcast apps allow me to remove content after listening. Others don't, though.
I'm hoping some of you younger people know the answer.
Thanks,
Nana Lybbr8

The size of an app depends on two different things:
1) the size of the App (as in the App Store)
2) the size of the App Data
The App Data can really inflate the size.
If you want to see how much space an app is actually taking up, got to the Settings app under General and then tap "usage."
Unfortunately some apps don't let you delete the content. Others do.
Hope this answers your question.

How much data does the mobile hotspot use?

I am trying to figure out how much data the mobile hotspot will use? I do not have a lot of data on my plan and don't want to go over. Any ideas?

Hi wenfam!
That's a great question! Data usage can differ depending on how the device is used. Here's a helpful link on how to monitor the usage: http://is.gd/52jiNm ^CB

How do you include the actual CLOB value as ASCII when writing XML?

When using the XDK for PL/SQL ( creating XML from query ) and the table that you query has a CLOB column the value in the resulting XML document is
written as:
<column>(CLOB)</column>
how do you get the api to write the actual CLOB data?

That article is talking about choosing HOW to STORE an XML document.
I want to know how to write the contents of a CLOB column along with the other columns in a table in a single XML document.
I know how to store an XML doc as a clob I know how to store an XML doc object relationally.
I I have a table with 5 varchar2 columns 5 number columns and 1 clob column and I create an xml document as a clob from a select * on that table. I then write that clob to the file system. What is the clob columns data going to look like?
its gonna be <column>(CLOB)</column> THATS NOT WHAT I WANT. I want the actual data that was in that CLOB column.
Thank you for all responses.

How to re-configure the actual Hotspot configuration/access information?

Similar Messages

Maybe you are looking for