How to re-create realm

hi friends
this is PHANI
i have a problem that is in security realm there is myrealm
by mistake i deleted the myrealm
i need myrealm. how can i get it back or create newrealm with same settings
thanks in advance
PHANI

It is not possible to get the security realm back once deleted.
Only option is to replace the existing config.xml file with some backup config.xml which has the old realm configuration and then restarting the Admin Server.
You can check inside the %DOMAIN_HOME%/config/ dir for some backup config files.
By default Weblogic creates a backup of a config.xml file as : config_bootstrap.xml
Try to copy the same file as config.xml and restart the admin server.
thanks,
Sandeep

Similar Messages

How do I create/host interactive articles with embedded video for use in browsers?

I'm seeking a little guidance -
How do I create/host interactive articles with embedded video for use in browsers?
The aim is to bring together video, design, images and writing in one place. A little like Born Presents, but very accessible and user friendly.
I'm happy using InDesign but want to create interactive articles / magazines that have embeded video files as required. I've been looking at .SWF files but I've come unstuck.
I want people to view the articles via a blog, ideally with them opening in a lightbox style viewer. It's not intended for tablet viewing and people should be able to view and interact with the files with little effort on their part.
I think I know how to create these files within InDesign, but I'm not so hot on web design and I'm not sure how to host these online. Does this start coming into the realms of Flash?
If anyone could point in the right direction I'd really appreciate it - Thank you in advance.

PDF is one thing. Folios for DPS is another. There is a little bit of
overlap but not much.
The interactivity in the folio overlays panel is for DPS only.

How to configure security realm for Active Directory ?

Hi,
Can any body suggest how to configure security realm in weblogic 8.1
I have simple login page where in user can enter his credentials, and i have MS-Active Directory where we maintain all users.
users who loged into web application has to be authenticated from Active Directory.
please suggest what are the steps that we need to follow
thanks in advance

Hi Sankar,
You can login to the weblogic server admin console and create a new realm.
Once you have created the realm you can add the authentication provider.You add the Active Authentication Provider.But you must have the the configuration inforamation of MS AD.You can read my blog http://dev2dev.bea.com/blog/bishnu_kumar/
where the integration is with iPlanet LDAP.Steps will be similar.
You must have a login portlet in your portal application and that should have been in accordance with j2ee security standards.For example you may use basic authentication or userlogin control or p13n API
Regards
Bishnu

How can I create JScrollPane in my swing application with scroll bars movin

Hi,
How can we create scrollpanes moving with scrollbars.I tried many times with custom layout.but it does not work if i set custom layout.I hope that I will get my problem solved.
Thanks and Regards,
Rameh RK

This means it is not possible to create a pure unicode file without the byte order mark?
You wouldn't happen to know how a file with byte order mark should read on a Linux system?
Or if this possible or not?
Regards
Christian

How do i create 4 different itunes id's in one household?

How can I create 4 different iTunes id's in one household so that when backing up to icloud, we can each have separate back ups?

The same way you create one, but do it four times!

How do i creating multiple icloud accounts for one itunes account

how do i creating multiple icloud accounts to access one itunes account?

Perhaps you could explain a bit more what you want to do...
iCloud accounts don't access an iTunes account.
iTunes account is used to make purchases.

HT204053 I have one apple ID that my entire family has been using. How do I create new apple ID's for each of us and move the appropriate content to each new ID from the original apple ID now that we all have our own devices?

I have been using one apple ID for 4 family members. Up until now it hasn't been a problem but now that we all have our own devices how do I create new apple ID's for each of us and them move the approprioate things from the original apple ID account to the new ones for each of us?

stuartx4 wrote:
Thanks Csound1, wish I have seperated everything from the beginning but when your kids are little and start buying music etc it just didn't seem like an issue.
That has a familiar ring to it

TS2756 How can i create a new usb connection (service) on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )

How can i create a new usb connection (service) on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )
i know its not a problem whit my carrier o data plan or sharing preferences on the ipone because when i use it un my laptop it works perfectly through
the usb and even works on the Imac through wifi and bluethood tethering but NOT through usb!!.
the problem is that trying to make it work i deleted the "profile" usb iphone on the network prefereces panel. Now i only have 3 options: ethernet / wifi / bluetooth
but not the usb iPhone i used to have.
And when i try to add a new one i dont get a USB option.
can some one help me please??
this is how it looks (after the bluetooth PAN i used to have USB iPhone option)

The question would be more appropriate in the Mac forums as it is not really related to the iPhone.

How can I create a new layer that is a gradient?

Hi, i'm very new to photoshop scripting and am having some trouble.
I'm looking for a way to take an image i have and set it to have a gradient opacity as it approaches the middle, my thought on how to do that was to just create a layer that is a gradient from top left to bottom right and then attach that as a vector mask.
Any ideas on how I could create this gradient layer in script, or a better method of doing this opacity gradient?
Thanks in advance,
Levianth

You could try this:
// 2012, use it at your own risk;
#target photoshop
if (app.documents.length > 0) {
var myDocument = app.activeDocument;
var theLayer = myDocument.activeLayer;
if (theLayer.isBackgroundLayer == true) {theLayer.isBackgroundLayer = false};
// create gradient layer;
// =======================================================
var idMk = charIDToTypeID( "Mk " );
    var desc15 = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
        var ref3 = new ActionReference();
        var idcontentLayer = stringIDToTypeID( "contentLayer" );
        ref3.putClass( idcontentLayer );
    desc15.putReference( idnull, ref3 );
    var idUsng = charIDToTypeID( "Usng" );
        var desc16 = new ActionDescriptor();
        var idType = charIDToTypeID( "Type" );
            var desc17 = new ActionDescriptor();
            var idType = charIDToTypeID( "Type" );
            var idGrdT = charIDToTypeID( "GrdT" );
            var idLnr = charIDToTypeID( "Lnr " );
            desc17.putEnumerated( idType, idGrdT, idLnr );
            var idGrad = charIDToTypeID( "Grad" );
                var desc18 = new ActionDescriptor();
                var idNm = charIDToTypeID( "Nm " );
                desc18.putString( idNm, "Custom" );
                var idGrdF = charIDToTypeID( "GrdF" );
                var idGrdF = charIDToTypeID( "GrdF" );
                var idCstS = charIDToTypeID( "CstS" );
                desc18.putEnumerated( idGrdF, idGrdF, idCstS );
                var idIntr = charIDToTypeID( "Intr" );
                desc18.putDouble( idIntr, 4096.000000 );
                var idClrs = charIDToTypeID( "Clrs" );
                    var list3 = new ActionList();
                        var desc19 = new ActionDescriptor();
                        var idClr = charIDToTypeID( "Clr " );
                            var desc20 = new ActionDescriptor();
                            var idRd = charIDToTypeID( "Rd " );
                            desc20.putDouble( idRd, 0.000000 );
                            var idGrn = charIDToTypeID( "Grn " );
                            desc20.putDouble( idGrn, 0.000000 );
                            var idBl = charIDToTypeID( "Bl " );
                            desc20.putDouble( idBl, 0.000000 );
                        var idRGBC = charIDToTypeID( "RGBC" );
                        desc19.putObject( idClr, idRGBC, desc20 );
                        var idType = charIDToTypeID( "Type" );
                        var idClry = charIDToTypeID( "Clry" );
                        var idUsrS = charIDToTypeID( "UsrS" );
                        desc19.putEnumerated( idType, idClry, idUsrS );
                        var idLctn = charIDToTypeID( "Lctn" );
                        desc19.putInteger( idLctn, 0 );
                        var idMdpn = charIDToTypeID( "Mdpn" );
                        desc19.putInteger( idMdpn, 50 );
                    var idClrt = charIDToTypeID( "Clrt" );
                    list3.putObject( idClrt, desc19 );
                        var desc21 = new ActionDescriptor();
                        var idClr = charIDToTypeID( "Clr " );
                            var desc22 = new ActionDescriptor();
                            var idRd = charIDToTypeID( "Rd " );
                            desc22.putDouble( idRd, 0.000000 );
                            var idGrn = charIDToTypeID( "Grn " );
                            desc22.putDouble( idGrn, 0.000000 );
                            var idBl = charIDToTypeID( "Bl " );
                            desc22.putDouble( idBl, 0.000000 );
                        var idRGBC = charIDToTypeID( "RGBC" );
                        desc21.putObject( idClr, idRGBC, desc22 );
                        var idType = charIDToTypeID( "Type" );
                        var idClry = charIDToTypeID( "Clry" );
                        var idUsrS = charIDToTypeID( "UsrS" );
                        desc21.putEnumerated( idType, idClry, idUsrS );
                        var idLctn = charIDToTypeID( "Lctn" );
                        desc21.putInteger( idLctn, 4096 );
                        var idMdpn = charIDToTypeID( "Mdpn" );
                        desc21.putInteger( idMdpn, 50 );
                    var idClrt = charIDToTypeID( "Clrt" );
                    list3.putObject( idClrt, desc21 );
                desc18.putList( idClrs, list3 );
                var idTrns = charIDToTypeID( "Trns" );
                    var list4 = new ActionList();
                        var desc23 = new ActionDescriptor();
                        var idOpct = charIDToTypeID( "Opct" );
                        var idPrc = charIDToTypeID( "#Prc" );
                        desc23.putUnitDouble( idOpct, idPrc, 0.000000 );
                        var idLctn = charIDToTypeID( "Lctn" );
                        desc23.putInteger( idLctn, 0 );
                        var idMdpn = charIDToTypeID( "Mdpn" );
                        desc23.putInteger( idMdpn, 50 );
                    var idTrnS = charIDToTypeID( "TrnS" );
                    list4.putObject( idTrnS, desc23 );
                        var desc24 = new ActionDescriptor();
                        var idOpct = charIDToTypeID( "Opct" );
                        var idPrc = charIDToTypeID( "#Prc" );
                        desc24.putUnitDouble( idOpct, idPrc, 100.000000 );
                        var idLctn = charIDToTypeID( "Lctn" );
                        desc24.putInteger( idLctn, 2048 );
                        var idMdpn = charIDToTypeID( "Mdpn" );
                        desc24.putInteger( idMdpn, 50 );
                    var idTrnS = charIDToTypeID( "TrnS" );
                    list4.putObject( idTrnS, desc24 );
                        var desc25 = new ActionDescriptor();
                        var idOpct = charIDToTypeID( "Opct" );
                        var idPrc = charIDToTypeID( "#Prc" );
                        desc25.putUnitDouble( idOpct, idPrc, 0.000000 );
                        var idLctn = charIDToTypeID( "Lctn" );
                        desc25.putInteger( idLctn, 4096 );
                        var idMdpn = charIDToTypeID( "Mdpn" );
                        desc25.putInteger( idMdpn, 50 );
                    var idTrnS = charIDToTypeID( "TrnS" );
                    list4.putObject( idTrnS, desc25 );
                desc18.putList( idTrns, list4 );
            var idGrdn = charIDToTypeID( "Grdn" );
            desc17.putObject( idGrad, idGrdn, desc18 );
        var idgradientLayer = stringIDToTypeID( "gradientLayer" );
        desc16.putObject( idType, idgradientLayer, desc17 );
    var idcontentLayer = stringIDToTypeID( "contentLayer" );
    desc15.putObject( idUsng, idcontentLayer, desc16 );
executeAction( idMk, desc15, DialogModes.NO );
// move layer below;
var theGradient = myDocument.activeLayer;
theGradient.move(theLayer, ElementPlacement.PLACEAFTER);
// clipping mask;
theLayer.grouped = true

How do I create a new icloud email address for my apple id?

Hi there
How do I create a new icloud email address for my apple id? My original email address is associated with my previous employers.
When I send email from my Macbook, it seems as if I still work there, which is a problem.
I would like to use the email address that I created for my iPad.
When I login with my appleid (for my macbook) I keep getting the old company one, not the new one.
Is there any way of resolving this? I
Thanks
Kelvin

Welcome to the Apple Community.
Providing you aren't trying to change you Apple iCloud email address you can make changes at My Apple ID

How can I create a new ring tone for my iPhone 4?

How can I create a new ring tone for my iPhone 4? I followed the Garage Band process and ended up with the ring tone I want as a AAC audio file. It got stored in my iTunes a a song rather than a ring tone. How do I make it a ring tone vs. a song? I tried dragging it t the Ring Tone category at the bottom of the ITunes list, but it won't alloow me to move it?

There's also an easy to use Applescript over at Doug's Applescripts for iTunes. It automates the whole thing. All you do is set the start and stop time on a file in iTuens and run the script. It will do everything else.
Make Ringable v1.1
http://dougscripts.com/475

How to i create a new itunes account for my old iphone so i can transfer data to new iphone, since my daughters new iphone is now linked to my acc and she ends up with all my apps and contacts etc

My daughter has previously had an ipod which was linked to my itunes iphone account.
she now has a new iphone and has linked this to that account and now she receives all my contacts apps etc when she syncs her account.
How do i create a new itunes account for my old iphone so that i can transfer data to my new iphone and keep the two seperate so that when she deletes all my contacts and apps and then syncs her phone again we can still be compatible.

iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

I have an iPad and and iPhone. They share an iCloud and I want separate iCloud accounts. How do I create a new account without losing any information? I want to keep the original account on one device.

I have an iPad and an iPhone that share an iCloud account. I didn't realize when I got my iPad last year that when I signed up the iCloud on the device that it would share and use 5g of iCloud between the both of them. How do I unsync them and have two separate iCloud accounts? I don't care about sharing between them. When my kids put games on my iPad, I don't want them going on my phone. How do I create a new iCloud without losing any info on the other device?

Hi sugaliko,
You may need to set up your BlueTooth connection to the keyboard again. Use the steps in this article for guidance -
iOS: Third-party Bluetooth accessories
http://support.apple.com/kb/HT1664
Thanks for using Apple Support Communities.
Best,
Brett L

How can I create a Teststand (1.0.3 or 2.0) distribution without having all of the VIs (6.0.2 or 6.1) in the same directory?

How would I create a Teststand distribution of LabVIEW VIs and maintain the test VI directory structure that I want?
I know that I have to use the application builder to build the custom operator interface, configure it as an ActiveX server, and launch the Teststand engine installation.
The only problem that I have is using the VI packager which puts all of the test code and sequences in a single directory.
This gets quite messy. There are just over 1000 files in the neatly orgainzed directory structure that I have now. (this includes support files, dll's and such)
I have read brief appnotes on configuring the ini file(s) to use
the vi search path that I want, but have not been able to get this to work. Maybe I'm not updating the correct ini? or have to include each subdirectory?
I have currently upgraded from LabVIEW 6.0.2 to 6.1
I am currently using Teststand 1.0.3
I have not upgraded to Teststand 2.0 yet because I have not decided if I want to build at this revision or go through the extra work to mass compile Teststand at LabVIEW 6.1, install the LabVIEW 6i VI Packager Fix, and update the new Teststand LV operator interface with my changes.
At present, I'm not getting the results I want and am quickly running out of time. I have to deliver the project by the 14th of July 2002.
Sorry for the long question and thanks for you help.

Hi,
I dont think the problem is really related to using the VI Packager but more to how the OI interface applications relates to labVIEW File constants.
If you are using the LabVIEW as the ActiveX Server then there should be no problems. But if you are using the Runtime LabVIEW server such as 'TestStandLVRTS' then the file constant would return different paths.
eg for the Default Path you would get 'C:\TestStand\Components\User\RuntimeServers\LabVIEW' instead of 'c:\Program Files\National Instruments\LabVIEW'.
Attacted is an example to show how to change these paths when using your runtime server. Unzip this into your teststand examples folder
Put the INI file in the location of the \user\runtimeservers\labview folder.
Change the labview adapter t
o use TestStandLVRTS.exe. You can run the example sequence from either the OI or seqeditor.
I hope this helps
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
UsingLVOI.zip ‏20 KB

How can I create an empty row on a #TempTable based on an input parameter

So if my Line of Business is 'MC' or 'MG', I have to go over to Oracle and get its data accordingly. Then, when I create my final report result set, I think I'll want to UNION in that result set if my Parameter is 'MC' or 'MG'. I don't think I can UNION
based on the value of the Parameter. So my thought process was to create an empty row on my #TempTable so when I UNION and my parameter is NOT 'MC' or 'MG' then it will have nothing to UNION in. My struggle is how do I create an empty row in my #TempTable
if my parameter is NOT 'MC' or 'MG'
If I am wwwaaayyy off here, please tell me so.
This is my #TempTable Creation SQL...
IF EXISTS
(SELECT 1
FROM [#TempTable_LineOfBusiness_Parameter]
WHERE [#TempTable_LineOfBusiness_Parameter].[RESULT] IN ('MC','MG'))
BEGIN
SELECT *
INTO [#TempTable_Market_Prominence_Member_Data]
FROM OPENQUERY
(RPDMHF,
'SELECT HCFA_NAME_ORG.NAME_ID,
HCFA_NAME_ORG.MEMBER_ID,
HCFA_NAME_ORG.HIC_NUMBER,
MEMBER.NAME_FIRST,
MEMBER.NAME_LAST,
HCFA_DATE.START_DATE,
HCFA_DATE.END_DATE,
HCFA_NAME_ORG.COUNTY_CODE,
HCFA_NAME_ORG.PART_A_PAYMENT,
HCFA_NAME_ORG.PART_B_PAYMENT,
HCFA_NAME_ORG.STATUS,
HCFA_NAME_ORG.ORG_ID,
HCFA_NAME_ORG.PLAN,
HCFA_NAME_ORG.ENROLL_DATE,
HCFA_NAME_ORG.PBP_ID,
HCFA_DATE.VALUE
FROM SC_BASE.HCFA_DATE
LEFT JOIN SC_BASE.HCFA_NAME_ORG
ON HCFA_NAME_ORG.NAME_ID = HCFA_DATE.NAME_ID
LEFT JOIN AMIOWN.MEMBER
ON TRIM(MEMBER.MEMBER_NBR) = TRIM(HCFA_NAME_ORG.MEMBER_ID)
WHERE HCFA_DATE.INDICATOR = ''plan''
AND HCFA_DATE.START_DATE >= ''2015-01-01''
END
If I add an ELSE, it always comes back and tells me the #TempTable_Market_Prominence_Member_Data already exists. As if it's creating it regardless of the Top IF.
Thanks for your review and am hopeful for a reply.

Hi ITBobbyP,
The error came back from your ELSE Statement most probably caused by the reason mentioned in Hoffmann's post.
Regarding your requirement, I would suggest you CREATE the [#TempTable_Market_Prominence_Member_Data] explicitly.
CREATE TABLE [#TempTable_Market_Prominence_Member_Data]
NAME_ID INT,
MEMBER_ID INT,
HIC_NUMBER VARCHAR(99),
NAME_FIRST VARCHAR(99),
NAME_LAST VARCHAR(99),
START_DATE DATE,
END_DATE DATE,
COUNTY_CODE VARCHAR(99),
PART_A_PAYMENT MONEY,
PART_B_PAYMENT MONEY,
STATUS VARCHAR(99),
ORG_ID INT,
PALN VARCHAR(99),
ENROLL_DATE VARCHAR(99),
PBP_ID INT,
VALUE INT
IF EXISTS
(SELECT 1
FROM [#TempTable_LineOfBusiness_Parameter]
WHERE [#TempTable_LineOfBusiness_Parameter].[RESULT] IN ('MC','MG'))
BEGIN
INSERT INTO [#TempTable_Market_Prominence_Member_Data]
SELECT *
FROM OPENQUERY
(RPDMHF,
'SELECT HCFA_NAME_ORG.NAME_ID,
HCFA_NAME_ORG.MEMBER_ID,
HCFA_NAME_ORG.HIC_NUMBER,
MEMBER.NAME_FIRST,
MEMBER.NAME_LAST,
HCFA_DATE.START_DATE,
HCFA_DATE.END_DATE,
HCFA_NAME_ORG.COUNTY_CODE,
HCFA_NAME_ORG.PART_A_PAYMENT,
HCFA_NAME_ORG.PART_B_PAYMENT,
HCFA_NAME_ORG.STATUS,
HCFA_NAME_ORG.ORG_ID,
HCFA_NAME_ORG.PLAN,
HCFA_NAME_ORG.ENROLL_DATE,
HCFA_NAME_ORG.PBP_ID,
HCFA_DATE.VALUE
FROM SC_BASE.HCFA_DATE
LEFT JOIN SC_BASE.HCFA_NAME_ORG
ON HCFA_NAME_ORG.NAME_ID = HCFA_DATE.NAME_ID
LEFT JOIN AMIOWN.MEMBER
ON TRIM(MEMBER.MEMBER_NBR) = TRIM(HCFA_NAME_ORG.MEMBER_ID)
WHERE HCFA_DATE.INDICATOR = ''plan''
AND HCFA_DATE.START_DATE >= ''2015-01-01''
END
Explicitly creating the temp table will offer below benefit in this case.
The ELSE statement is no longer needed, if the no rows get inserted into that table, it has nothing to union an empty table.
With the column datatype defined, you can avoid such conversion error
SELECT NULL AS COL1,NULL AS COL2 INTO #T
SELECT COL1,COL2 FROM #T
UNION
SELECT 1,'ABC'--Conversion failed when converting the varchar value 'ABC' to data type int.
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

How to re-create realm

Similar Messages

Maybe you are looking for