How to re-enable Beats speakers and sub woofer after configured Windows 8/Ubuntu dual boot?

HP ENvy DV7-7240us
Windows 8 / Linux Ubuntu Dual Boot
No Sound through two front Beats speakers or sub woofer both operating systems after installed Ubuntu 12.10 as dual boot.
Is there a way to at least re-enable the Beats speakers and sub woofer in Windows 8 when I boot on that OS? I am using the UEFI as the boot manager by hitting ESC / F9, and not GRUB2 (Linux).
I did update to "BIOS" (UEFI) F.22 concurrently with the dual boot...possibly this has something to do with it?
I would like to keep the dual boot, but the loss of the Beats speakers is kind of a deal breaker, and virtualization of Linux seems to be buggy in its own right.
I tried re-enabling the sound through right clicking on the speaker icon in the tray, and configuring Playback devices. The only option available is IDT High Definition Audio Codec. Is there another device listing for the Beats speakers that I am missing?
Only other minor issue with the hardware I am aware of is only on the Linux side, that being no pinch to zoom on track pad, which I try not to use anyway.
Thank you.

Have you tried resetting BIOS settings to default? Enter BIOS by tapping/holding F10 key immediately after powering on.Reset to Default settings, usually tap F9,check bottom of screen for correct key.Save & Exit.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

How to enable DDE communication and Network DDE DSDM on windows 7

How to enable DDE communication and Network DDE DSDM on windows 7

Hi,
For Network DDE to function, NetDDE.EXE needs to be installed and running on both machines before attempting to conduct a Network DDE conversation. NetDDE.exe is a Windows Service system file that is used to communicate the shared dynamic data exchange used
by Network DDE. It has no graphical user interface (it runs as a background Windows service).
For more information, please refer to this article:
http://www.citect-webhelp.schneider-electric.com/vijeo/Content/Starting_network_DDE_services.html
http://support.ge-ip.com/support/index?page=kbchannel&id=S:KB15377&actp=search
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Karen Hu
TechNet Community Support

I TUNES WON'T PLAY IN 5.1 SURROUND SOUND WITH WINDOWS 7. ONLY PLAYS FRONT SPEAKERS AND SUB WOLFER BUT WON'T PLAY REAR SPEAKERS. YOU TUBE VIDEOS PLAY ALL 5 SPERAKERS .

I TUNES WON'T PLAY MY LIBRARY IN 5.1 SURROUND SOUND ON MY DELL 4600 COMPUTER. I HAVE ALTEC LANSING SPEAKERS THAT ARE WIRED THROUGH THE PORTS IN THE REAR OF COMPUTER. IT PLAYS ONLY FRONT SPEAKERS AND SUB WOLFER, BUT YOU TUBE VIDEOS PLAYS IN ALL 5 SPEAKERS. I HAVE A WINDOWS 7 OPERATING SYSTEM. I TUNES LIBRARY PLAYED CORRECTLY IN 5.1 SURROUND SOUND WITH WINDOWS XP ON THE SAME COMPUTER, BUT CHANGED WITH WINDOWS 7 OS. THE DRIVER SETTINGS ARE CORRECT AND SET TO 5.1 SURROUND SOUND AND WHEN GOING THROUGH SPEAKER TEST, ALL 5 SPEAKERS PING. iS THERE ANYTHING I CAN DO TO GET THE REAR SPEAKERS TO PLAY FROM MY I TUNES LIBRARY?

Hi mikefrompoland,
For more information about 5.1 Surround Sound in iTunes, you may find the following article helpful (it is primarily aimed at Mac users, but the settings in Windows should be similar):
Setting up iTunes and your DVD Player for digital surround sound
http://support.apple.com/kb/ht4072
Note: For surround sound to work, the content being played must be encoded to support it.
Regards,
- Brenden

I want to transfer an audiobook and a movie from my MacBook Pro to my iPhone 4S, and can't figure out how. I went to "Help" and it said after connecting the two devices I should "Click Apps," but I can't find anything labeled "Apps" to click. Help?!!

I want to transfer an audiobook and a movie from my MacBook Pro to my iPhone 4S, and can't figure out how. I went to "Help" and it said after connecting the two devices I should "Click Apps," but I can't find anything labeled "Apps" to click. Help?!!

If you have iTunes 11 on your Mac then you can enable the left-hand sidebar via option-command-S, that might make it easier to navigate.
Connect the phone to your Mac and select it on that left-hand sidebar, and on the right-hand side of the screen there should be a series of tabs which you can use to select what to sync to the phone. If it's an audiobook then it should appear on the Books tab for selecting/syncing, and films will be on the Movies tab. When you've got the audiobook on your phone you should get an Audiobooks option in the Music app (you might need to tap the '...' tab at the bottom of the Music app to see it).

Can anyone tell me how to restore my itunes library and playlists? After I downloaded mountain lion my library is missing and my devices can be synced to only one library ...the missing one

can anyone tell me how to restore my itunes library and playlists? After I downloaded mountain lion my library is missing and my devices can be synced to only one library ...the missing one

That .itl file actually is the library -- at least the critical part of it although the library is actually many files and folders.
Try starting iTunes and immediately hold down the option key. When it asks, guide it to the .itl file.
It's really hard to say without being able to poke around your computer. Upgrading should not delete the old library, but still it happens to the very, very few which is why we make backups before updating. If the old library file is gone then so are your playlists. You can always see if the following is of any use:
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451

How to remove forget icloud id and pass word after restore, how to remove forget icloud id and pass word after restore

how to remove forget icloud id and pass word after restore

If the device belonged to someone else whose Apple ID and password you don't know, then your device is useless.

How can u change the desktop and taskbar to a classic windows view

how can u change the desktop and taskbar to a classic windows view in 8.1

Hi,
If you mean to customize the desktop, you can use themes, desktop backgrounds, window colors, and screen savers to personalize your desktop.
If you want some free themes and desktop backgrounds to use, there are lots to choose from in the
Personalization Gallery.
To learn more about personalizing the desktop, see
Get started with themes.
Best regards
Michael Shao
TechNet Community Support

How do I recover the music I have purchased after a Windows disaster?

How do I recover the music I have purchased after a Windows disaster? Windows on this computer stopped working correctly. I was told by HP support that the registry was corrupted and that I had to re-install Windows and programs from CDs that came with the computer. I did this and Windows started working correctly again. The only trouble is that all of the music I bought is gone. How do I recover the music I have purchased from iTunes after a Windows disaster and after re-installing Windows?
Please tell me that you know about all of my song purchases and that there is a way I can download all of these to this computer again without having to pay for them again.
I have learned my lesson about Windows. In the short run I plan to buy a backup drive that I can plug into this computer that I can restore from if and when something like this happens to Windows again. In the long run I plan to buy an Apple computer the next time I buy a computer.

You could try contacting the iTunes Music Store Customer Service and you may be able to persuade them to sanction a second free download however they are not under any obligation to do so. The policy on lost songs is that you have to pay to download them again:
"Once a Product is purchased and you receive the Product, it is your responsibility not to lose, destroy, or damage the Product, and Apple shall be without liability to you in the event of any loss, destruction, or damage."
You can email them from any of the links on this page: iTMS Customer Service

[Forum FAQ]How to customize Windows 7 & Windows 8.1 dual boot menu

Scenario 1:
When you install Windows 8.1 on Windows 7 based computer, the default boot option is Windows 8.1 boot options menu which is shown as Figure 1:
If you want to use the old Windows 7 boot menu, follow these steps:
Start the computer and then go into
Windows 8.1 boot options menu which is shown as Figure 1.
Click
Change defaults or choose other options, and Options menu appears which is shown as Figure 2.
Click
Choose a default operation system option.
Click
Windows 7 Enterprise option to set Windows 7 as the default operating system in the Choose a default operating system menu which is shown as Figure 3.
Restart, and it will be changed to
Windows 7 boot options menu which is as shown as Figure
Scenario 2:
If you have Windows 7 and Windows 8.1 dual-boot configuration, and the default boot menu is Windows 7 boot options menu which is shown as Figure 4.
If you want to get the GUI as Windows 8.1 style, follow these steps:
Boot into Windows 8.1 computer, open the
command Prompt (Admin).
Type the following command
bcdboot c:\Windows and press Enter.
Restart, and you'll see the Windows 8.1 boot options menu which is as shown Figure 1.
Scenario 3:
When you have dual-boot system, one of the system disappear from the boot menu. We could follow these steps to get it back:
Boot the computer from the installation media (Here my example is Windows 7) that works fine system.
Go into
System Recovery Options menu, which is as shown as Figure 6.
Click
Command Prompt link to open the command prompt window
Use the
diskpart and list volume commands to confirm the OS boot drive, the commands are shown as Figure 7.
Backup the bcd file, rename it.
Rebuild a new bcd file. It will scan all disk to confirm all Windows installation on your computer and ask if you want to add them to boot list.
Type
Y to agree with adding to boot list. In next boot, you will get all boot options back in the boot menu.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Since you've selected as default OS as Windows 8.1 you can go to disk management console and format the drive as required.
You can remove the Win 7 entry from boot loader:
To launch msconfig:
Click Start
In the Search text box, type msconfig
Launch msconfig by selecting it from the search results above the search text box.
After msconfig is launched:
Go to the Boot tab
Slect the boot entry you want to delete.
Click the Delete button and then click OK.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

How can I partition internal HDD after installing Windows 7 Professional via Boot Camp 4.0?

I recently purchased MacBook Pro 13" (Late 2011) model with OS X v10.7.2 Lion installed. I've upgraded to OS X v10.7.3 Lion and updated all other software.
I require Windows 7 for some Windows based softwares that do not support Mac OS X. Therefore, used Boot Camp 4.0 to install Windows 7 and then tried partitioning single internal HDD to have 3 partitions (4 total including BOOTCAMP partition). Disk Utility created a 648.5MB partition and then I was able to create 3 other partitions of custom sizes. After applying these changes, I got an error message that said selected volume size is too small. I resized this 648.5MB partion to a custom size and had total 4 partitions, including BOOTCAMP.
After reapplying these changes, BOOTCAMP partition was removed and I was left with only 3 partitions and empty space.
I've tried several different ways to partition the disk, all in vein. Is there a way I can partition my single internal HDD after installing Windows 7 Professional via Boot Camp 4.0?

You can't do what you want with GUI utilities, which will only allow a total of 4 partitions due to the limitation of MBR needed to support Windows. Those four partitions: EFI System (hidden), Mac OS, Recovery HD (hidden), Windows. So with Lion, you only get two visible partitions if you're going to use Windows with BootCamp. You can't make anymore with the included graphical tools.
If you need more partitions you'll need to use something like GPT fdisk (gdisk) to create the partitions in the GPT first. Then add the Windows partition only to the MBR and flag it as bootable. gdisk can be googled and downloaded for Mac OS X off sourceforge. It is not a GUI tool.
You should read this:
http://www.rodsbooks.com/gdisk/
And this:
http://www.rodsbooks.com/gdisk/hybrid.html

Speakers and subs

I Recently Purchased A HP Envy DV7 Notebook PC Need Speakers and or Subs To Rock A Party of About 50 People.looking For Quality.Non Internal Bluetooth What All Do I Need $ 500.00 Budget

A number of factors:
Will this be inside/outside? If inside, how big of a room are we talking?
Would you prefer something that you could use in the future, perhaps a surround sound system?
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

How do I enable "Save As" and disable "Save"

I have constructed a filable form in Adobe Acrobat Pro 8.1. The idea is to have this form downloaded to the users computer and used weekly to track expenses and each week to print and save a copy. The problem is that with save enabled it overwrites the original form and now the person must download another original. My question is; How do I enable "Save As" to be used with filled out forms while disabling the "Save" function after data has been entered on the form?
Thanks for any assistance,
Pat

OK Pat,
In LC Designer you would create a button with the following JavaScript in the click event:
app.execMenuItem("SaveAs");
This will bring up the Save As dialogue window.
This simplified solution will work; however if you want to be more specific in file name / path then you will run into security issues, which will require additional privileged script / certified solutions. There are some posts dealing with this:
http://forums.adobe.com/message/1357119#1357119
http://forums.adobe.com/message/1359267#1359267
While the solution may not be ideal, it will at least prompt the user to "Save As" instead of "Save" and the user will just have to be responsible for making sure they rename the file.
Good luck,
N.

How to pass parameters between main and sub vi during parallel execution using the VI server technique?

Hello All,
I am working with the following example (from previous postings on this
board) that demonstrates how to run a sub vi in parallel with the main
vi. I'd like to pass parameters between the main and sub such as
the control (delay) and indicator (value) parameters of my subvi
example. Does any one know how to do this? Parallel
execution is important for me, I cannot just paste the subvi icon into
my main diagram (two nested while loops...)
Many thanks,
Luis
Message Edited by cascao on 08-16-2005 08:42 PM
Message Edited by cascao on 08-16-2005 08:42 PM
Attachments:
VI_Server_technique.vi ‏32 KB
SubVI_1.vi ‏19 KB

cascao wrote:
Hello All,
I am working with the following example (from previous postings on this
board) that demonstrates how to run a sub vi in parallel with the main
vi. I'd like to pass parameters between the main and sub such as
the control (delay) and indicator (value) parameters of my subvi
example. Does any one know how to do this? Parallel
execution is important for me, I cannot just paste the subvi icon into
my main diagram (two nested while loops...)
Many thanks,
Luis
Luis, you can use the VI Server methods 'Set Control Value' and 'Get Control Value', as demonstrated in the attached examples.
-Franz
Attachments:
VI Server.zip ‏26 KB

How to find the version, release and sub release of HFM

Dear
Need to check what exactly is the version, release and sub release of HFM.
I have only the information that is 11.1.2.1. xxxxx
I want to find out x
How can I get?
thank you

I got it to run using Celvin method (using the JRE not the JDK). The JDK method threw back the following(E:\Oracle\Middleware\EPMSystem11R1\OPatch>opatch lsinventory -oh E:\Oracle\Middleware\EPMSystem11r1 -jdk E:\"Program Files (x86)"\Java\jdk1.7.0_17\bin
Files was unexpected at this time)
The method below worked:
E:\Oracle\Middleware\EPMSystem11R1\OPatch>opatch.bat lsinventory -jdk E:\Oracle\
Middleware\jdk160_35
Oracle Interim Patch Installer version 11.1.0.9.9
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home       : E:\Oracle\MIDDLE~1\EPMSYS~1
Central Inventory : E:\Program Files\Oracle\Inventory
   from           : n/a
OPatch version    : 11.1.0.9.9
OUI version       : 11.1.0.9.0
Log file location : E:\Oracle\MIDDLE~1\EPMSYS~1\cfgtoollogs\opatch\opatch2013-09
-24_15-03-36PM_1.log
OPatch detects the Middleware Home as "E:\Oracle\Middleware"
Lsinventory Output file location : E:\Oracle\MIDDLE~1\EPMSYS~1\cfgtoollogs\opatc
h\lsinv\lsinventory2013-09-24_15-03-36PM.txt
Installed Top-level Products (2):
Oracle EPM System                                                    11.1.2.3.0
Oracle WebTier and Utilities CD                                      11.1.1.7.0
There are 2 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.
OPatch succeeded.
E:\Oracle\Middleware\EPMSystem11R1\OPatch>
**This is the actual file contents. **
--------------------------------------------------------------------------------Installed Top-level Products (2):
Oracle EPM System                                                    11.1.2.3.0Oracle WebTier and Utilities CD                                      11.1.1.7.0There are 2 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.--------------------------------------------------------------------------------

How do I get my speakers and Fatal1ty HS-1000 USB to run at the same time?

I am having trouble running both my speakers and Fatal1ty HS-1000 USB headset at the same time. Sometimes I like to take off my Fatal1ty HS-1000 USB headset and listen to my music really loud with my 5.1 system, but now I would have to unplug the Fatal1ty HS-1000 USB headset from the back.
So when I play WoW I have to plug my Fatal1ty HS-1000 USB headset back in and go back and forth when I want to listen to music loud and play WoW.
I installed the the drivers with the audio panel.

Chocobo87 wrote:
I am having trouble running both my speakers and Fatal1ty HS-1000 USB headset at the same time. Sometimes I like to take off my Fatal1ty HS-1000 USB headset and listen to my music really loud with my 5.1 system, but now I would have to unplug the Fatal1ty HS-1000 USB headset from the back.
So when I play WoW I have to plug my Fatal1ty HS-1000 USB headset back in and go back and forth when I want to listen to music loud and play WoW.
I installed the the drivers with the audio panel.
It seems like you want output of audio on both the speaker and headset. I too have problem of always unpluggin and switching. Does anyone know if both can work. Can audio output be both in speakers and headset?

How to re-enable Beats speakers and sub woofer after configured Windows 8/Ubuntu dual boot?

Similar Messages

Maybe you are looking for