How to re-enabling Automatic Waveform Overview

Hi
Little trick ...
To enabling Automatic refresh overwiew for audio files
Close Logic 7/8/9
Go to /your home/Library/preferences/
search apple.Logic.pro.plist and delete .
start logic and try to record a new audio...
bye.
note: This action delete all user preferences and your custom keyboard shortcuts.
Message was edited by: Yuto

I am not sure if the backlight is supposed to increase/decrease with ambient light conditions. This is true of the display that it will adjust its brightness with ambient light conditions. The 'manual' setting is the one to use to adjust the backlight to a comfortable level. Then the backlight switches off if computer is idle and this delay you can set by the slider in the system preferences>keyboard.
once the keyboard backlight goes off it comes back on again if you touch any key and the brightness of it will be the level at which you have manually set by the F5 and F6 keys.
At least this is what I could see on my MBP. If there is a way to turn on automatic brightness level it would be good to know.

Similar Messages

  • How can I enable "automatically bcc myself" for a certain account?

    Hi,
    I have a bunch of email addresses (as everyone else), and I want to enable "automatically BCC myself" only for a certain account.
    Mail.app doesn't allow me to configure the option per email address, but it is just all or nothing. I also spent good amount of time on googling, but fail to find a good solution for this.
    It would be really appreciated if anyone can post a solution, or a suggestion (e.g., looking into Apple Script in blah, blah area...).
    Thanks.
    Mike

    Mail > Preferences > Accounts. Choose the Account you want Bcc set too. Then, under the Composing setting, enable Automatically Bcc myself.
    When you are composing an email. there is also a setting drop down adjacent to From: that allows you to dynamically allow the Bcc field.

  • How do I enable automatic transfer of movies using iCloud.

    How do I enable this function. I have a iPhone 4s, iPad.

    iCloud does not store or sync movies.
    iCloud backs up your..
    Purchased music, TV shows, apps, and books
    Photos and video in the Camera Roll
    Device Settings
    App data
    Home screen and app organization
    Messages
    Ringtones
    From here  Apple - iCloud - Store and back up your content in iCloud.

  • How can I enable automatic links to websites or email addresses? I can do this in IE, but prefer to use Firefox.

    When composing emails, I often refer to other websites or to other people's email addresses. I'd like these referrals to be underlined or blued to indicate a direct link that has been enabled to these locations. This is no problem in Internet Explorer, as it's automatic there, as it is when I write a Word document, but I've been unable to find a way to make it automatic in Firefox. ( My email provider is Yahoo, but that shouldn't be relevant, as I was able to do this in IE with Yahoo.)

    There is usually a toolbar button in the editor to turn a text link into a clickable hyperlink (look for a chain like button).<br />
    You can select the text and click that button to turn the link into a clickable hyperlink.<br />
    If you can't find the button then hover them all to check the tooltip of each.<br />
    * Make Link - https://addons.mozilla.org/firefox/addon/142

  • How do I enable automatic +/- pen tool when hovering over a path/anchor with the tool in AI CC?

    I've noticed that in Illustrator CC (17.1) the pen cursor doesn't automatically let you add or delete an anchor point anymore, when in Pen tool mode (P). It used to be an automatic feature in CS5, where a + or - sign would show up whenever I hovered over a selected path with the tool. Help please?

    here it is in CS5. i couldn't say if they've changed it for CC, but I can't imagine it's gone completely.

  • How do I enable the Memory Overview in HANA Studio?

    I read John's blog about the SPS7 features:
    http://scn.sap.com/docs/DOC-49991#comment-467746
    Now I wanted to see the Memory Overview myself. I granted the role sap.hana.admin.roles::Monitoring to user SYSTEM and opened the Memory Overview. This is what I get:
    I cannot see the Memory Overview with HANA revision 70, 71 or 72.
    I cannot see the Memory Overview with HANA Studio running on Linux or Windows.
    I cannot see any entries in the tracefiles of the HANA database.
    The same problem with Resource Utilization, I get a blank window.
    The HANA database is up and running. Database, Client and Studio are revision 72.
    What do I do wrong? It seems that I am not the only one affected.
    Regards,
    Mark

    Hi Mark,
    Have a look at the loaded Delivery Units (DU) in your SAP HANA system. Is the HANA_ADMIN DU available?
    Check if all the Delivery Units have been loaded
    In SAP HANA Studio open the Modeler perspective and check the Delivery Unit.
    In the menu Window => Open Perspective => Other select the SAP HANA Modeler perspective.
    In the Quick Launch view navigate to Delivery Units. The following Delivery Units should be loaded by default.
    HANA_ADMIN
    HANA_IDE_CORE
    HANA_TA_CONFIG
    HANA_UI_INTEGRATION_CONTENT
    HANA_UI_INTEGRATION_SVC
    HANA_XS_BASE
    HANA_XS_EDITOR
    HANA_XS_FORMLOGIN
    HANA_XS_IDE
    HANA_XS_LM
    HANA_XS_SQLCC
    SAPUI5_1
    If there are Delivery Units missing please load all Delivery Units using the Import option in the Quick Launch view. Click Import => SAP HANA Content => Delivery Unit
    Select the files from the Server option.
    Open the File drop-down menu and select the missing Delivery Units one by one.
    To load the Delivery Unit press Finish and repeat this for all missing Delivery Units.
    Hay

  • Sybase - How to enable Automatic DB Expansion

    HI Friends,
    I am new to ASE.. have mostly worked on Oracle.
    I have installed a sap system on Sybase. I need to know how can i enable Automatic DB Expansion feature which i think i didnt selected during installation.
    I dont want to do this from DBACOCKPIT as this is not working properly and I need to run SGEN.
    please help.

    To bypass DBACOCKPIT will require a bit of background knowledge/understanding before setting up automatic db expansion.
    For starters I'd suggest taking a look at ASE 15.7 SP100 System Admin Guide, Chapter 16: Expanding Databases Automatically.
    If you still have questions after reviewing the docs ... just post back here with your specific questions.

  • Keychain: How to enable automatic access for certain applications?

    I have gotten really tired of Adium and Skype asking for the keychain password every time I reboot the machine, and Quicksilver neeing my system password all the time when installing updates.
    How do I enable automatic access to the keychain and system password for certain applications, but not all?
    PowerBook G4, 1.5 Ghz   Mac OS X (10.4.6)  

    Hi, Bjørn.
    A. You wrote: "I have gotten really tired of Adium and Skype asking for the keychain password every time I reboot the machine..."There are two things to check. You'll use Keychain Access — in the Macintosh HD > Applications > Utilities folder — for both.
    One key point to note before you begin: If the affected account was created under Jaguar, it's default keychain will have the same name as the account's short name. Accounts created under Panther or later have the default keychain name of "login." The user's default keychain is always highlighted in bold in the Keychains list in Keychain Access. All of the instructions in Mac Help regarding keychain assume the accounts were created under Tiger and always refer to keychain "login."
    Here are the two issues to check and correct:
    1. The affected account may have its keychain preferences set so that the keychain locks automatically after a period of inactivity or after sleep mode:1.1. Select the user's default keychain.
    1.2. Click Edit > Change Settings for Keychain "keychain_name."
    1.3. Deselect the checkbox next to "Lock after __ minutes of inactivity", if selected.
    1.4. Deselect the checkbox next to "Lock when sleeping", if selected.
    1.5. Click Save.2. The affected account's login password and keychain password are different. Set the keychain password on that account to be the same as the account's login password. See “Mac OS X 10.4 Help: Changing your keychain password.”
    Once those steps are taken, if an application requests access to the keychain, click Always Allow.
    Note that if you update applications, i.e. install later versions, you may be asked once to confirm the new version's access to your keychain. That's a standard security precaution.
    B. You wrote: "...Quicksilver neeing my system password all the time when installing updates."That cannot be prevented if that application is installed in the Macintosh HD > Applications folder using an installer, such as the Mac OS X Installer. Authentication is required if an installer will add or change files in either Applications or other System-related folders.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • How to enable automatic punctuation on a new MacBook Pro with retina?

    Can you tell me how to enable automatic punctuation on a new MacBook Pro with retina? Thanks

    In which application?  (There is no system wide punctuation.) 
    And how is the computer supposed to know what is the correct punctuation?  For example "Let's eat, Mom!" versus "Let's eat Mom!"  (Sort of depends upon whether your computer has weathered the zombie apocalypse, I guess.)

  • How do I find out which apple ID my computer is associated with so I can enable automatic downloads in the iTunes store?

    I'm trying to enable automatic downloads in the iTunes store for iCloud and i keep getting an error "your computer is already associated with another Apple ID" but I don't know which it could be? I've tried to look under Manage Devices in my iTunes account and I can't find my computer. Is there any way to find out what Apple ID my computer is associated with on my computer and not thru iTunes?

    Here's a compatibility guide by a 3rd party.  I can't attest to the accuracy.
    http://roaringapps.com/apps:table/tags/_a/index_tags/_a

  • Scroll bar does not appear in some PDF files. How can I enable it?

    Scroll bar does not appear in some PDF files. How can I enable it?

    Scroll bars are supposed to appear when needed.
    For example, scroll bars will appear when you zoom in on a page.
    FAQ: How to zoom in/out on a page
    Windows 8 automatically hides scroll bars after a few seconds of inactivity.  Scroll bars will reappear when you touch the screen and move your finger (on a Touch-enabled device) or move your mouse.
    Additionally, page navigation depends on the view mode (Single Page vs. Continuous Page).
    In the Single Page mode, you can swipe left/right (horizontally) or click the left/right arrow button with your mouse to go to the previous/next page.
    In the Continuous Page mode, you can swipe or scroll up/down (vertically) to go to the previous/next page.

  • How do I enable "long press" keyboard functionality on a Mac keyboard?

    I'm running FF 13 and Mac OS 10.7.4. When using other apps, I can press and hold certain keys, e.g., the letter O and a character palette appears providing me with accented/alternative characters. As I am using an American English keyboard in Germany, this functionality is useful when typing German characters (e.g., ö, ü, etc).
    Reference this article for more information: http://www.macworld.com/article/1161330/four_lion_terminal_hacks.html
    Any ideas of how I can enable this in FF?
    Thanks, Martin

    I don't think this is supported yet in Firefox (not sure if this is something that is automatically enabled in MacOS X apps, or if each client app needs to enable it).
    I filed a bug to enable this feature in Firefox: https://bugzilla.mozilla.org/show_bug.cgi?id=764297

  • What is java script and how do I enable it?

    What is java script and how do I enable it

    JavaScript is enabled by default for Adobe Reader for iOS, and I don't see that there's a way to disable it. It is currently used within a document to control the behavior of form fields, such as automatic formatting and calculations. Only a small subset of what's available in the desktop version is available in the mobile versions.

  • How do I disable automatic updates?

    I am going to have to use Firefox version 28 forever, exposing myself to many security risks in the process, because I do not like the drastic redesign of the interface in version 29 and Mozilla have not included an option to switch to the old interface.
    Many support forum posts argue that bringing back the old interface is a 'simple' matter, but it is not. I have spent many hours on two PCs so far, fiddling with the recommended third-party add-ons (e.g. Classic Theme Restorer) in the attempt to get the browser looking the old way again. I can ascertain with confidence that it is NOT possible to get things looking exactly as they did before, and certainly not looking like the particular customized setup I had myself.
    I have now re-installed version 28, and intend to continue using it indefinitely. However, automatic updates are still enabled, and Firefox has already tried to update itself to version 29 again. How can I disable automatic updates for good? I have tried some tricks like deleting the update files and then removing the update URL in about:config, but a new update was still downloaded somehow.
    How can I nix automatic updates for good?

    Hi,
    It is true that the Classic Theme Restorer add-on will NOT bring back all of your customized settings/appearance on Firefox 28, but it will help a little It's recommended that you stay on the latest version to receive the latest security fixes and bug patches but you're free to downgrade if you want.
    You can set these prefs in <code>about:config</code> to disable automatic updating:<br>
    app.update.auto - false<br>
    app.update.enabled - false<br>
    app.update.silent - false<br>

  • How to set enable usage rights in adobe reader?

    Dear all,
    How to set "enable usage rights in adobe reader..." in acrobat sdk?
    I did that through menu event but it shows saveAs dialog window.
    Please anyone guide how to handle the saveas window. Otherwise if there is any method to directly enable the option.
    Thanks...
    vijay

    There is no way to automate this in the Acrobat SDK.  If you need to automate Reader Enablement, you need another product – LiveCycle Reader Extension Server.

Maybe you are looking for