How to re-install backup discs after system recovery on pavilion 2201 wdows 7

I had to recover my windows 7 and created a set of 6 backup discs before. I have successfully recovered the system but cannot make any sense of the backup discs. I do no know how to re-install them. Anyone know?

Depends on what you used to make the Backup. There is Windows Backup in Control Panel or you could have used the very basic backup using HP Recovery Manager.
If you used the backup part of HP Recovery Manager that one is a very do-it-yourself type. You should have an .EXE file on the first disk-probably RecoveryMgr.exe . Click that .EXE file to start extracting the files to a folder on your hard drive. It will ask for each successive disk in the backup and extract the files. Once they are extracted to the folder on your laptop hard drive, it is your task to move them to appropriate location.Such as photos have to be moved to My Pictures, documents to my Documents, etc.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

Uploading backup discs after system restore completed

model # g60-530us - recovery program by cyberlink. first - when i go to the restore menu, I do not have the menu that hp site says should be there. I only have the microsoft system restore and the ystem restore. no others. second - after running system recovery and reformatting the disc. restore from the factory works as was supposed to. does all ok. when i go to reload the backup discs created, i do not have the option to reload them on startup. I reload them by going to disc one and starting it myself. this puts in a system recovery file on the disc. how do i recover the files to their origional settings and folders? My system runs, i see the folders but can only use them from the recovery folder, not as they were before my system became corrupt. HELP!

running the Restore.exe or RecoveryMgr.exe on the backup disc will expand all the backed up files to a folder on the C drive called "System Recovery", you will have to figure out where to put them.
Some of the files are junk and have no use, look in your old user account folder for pictures and whatever files you had saved on the old system.
Its not a very good backup software included with HP Recovery, it saves all the files but does not sort them or put them back where they go.

I erased my HD and could not install lion. if I turn on the mac now all I see is a folder with a question-mark. How can I install a new operation system?

I erased my HD and could not install lion. if I turn on the mac now all I see is a folder with a question-mark. How can I install a new operation system?

Install or Reinstall Mavericks, Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

My system is Lion and it seems that it comes with no iWeb. How can I install iWeb on Lion system?

My system is Lion and it seems that it comes with no iWeb. How can I install iWeb on Lion system?

You will need to buy a hardcopy "actual disc copy" of iLife 09 or 11 iLife '11 [OLD VERSION]

How do you install elements 11 after downloading it?

how do you install elements 11 after downloading it? I am running windows 8, it ask me what app I want to use and sends me to the Windows ap store

you need to download both the exe (smaller file) and the 7z (larger file). put both in the same directory and then click the exe.

Installing software is happen and reboot nearly one day after system recovery.

HP installing software is happen and reboot nearly one day after system recovery.
I have done the recovery for my lap
1)After recovery done system get reboot and hp software installation menu has came.
2)HP software get installed , and then rebooot.
3)This HP software installation menu is come and reboot the pc and again it come. it doesn't finish
this is running more than 24 hrs.
4)please guide to resolve the issue.
System Model: HP Pavilion dv5 Notebook PC
Operating system: Windows Vista Home Premium
Please use the link to download the video of my problem, which used understand the issue:
https://www.dropbox.com/s/bf7e08lmdrn32t1/HPSoftwareInstall-1.rar
https://www.dropbox.com/s/4k4rug8pvs3w6qu/HPSoftwareInstall-2.rar

Satellite C75D-A7370
ordered recovery media from Toshiba and installed it. .... I tried to call Toshiba support, but because I am outside my warranty, I was told I would be charged for support.
It is running Windows 8..even though it is supposed to be on 8.1 (according to the sticker on the bottom of the laptop).
The product key is buried in the hardware.
According to the spec above, the original model shipped with Windows 8 and needed to be upgraded. My guess is that they later shipped the same model with Windows 8.1.
It appears Toshiba shipped the wrong recovery media.
Explain that when you call.

Lost Quickbooks data after System Recovery

Is there anyway to recover Quickbooks data after system recovery?

Quickbooks is an accounting tool designed and marketed by the Intuit Inc. mostly used for financially-related processes anywhere in any big or small organization. So, financial means quite important and very useful data to store..so there are number of possibilities of QBW file or QuickBooks database corruption.
Read More: http://www.filesrecoverytool.com/quickbooks-recovery.html
use free trail version demo

How can I reinstall Photoshop CS6l after system restore

I downloaded and installed the trial version of CS6 a few days ago and everything was working wonderfully. Yesterday, some adware found its way through my firewall and installed itself on my system. The only restore point I had available predated the CS6 installation, and after the system recovered, PhotoShop was gone. I attempted to install it again to continue the trial, but got an error that directed me to a site that is no longer maintained by Adobe. How can I fix this? I'm sure the time limit on the trial hasn't stopped counting down, but I'm unable to install and check out the software. Any advice would be greatly appreciated!
Sciguy77

you're probably out of luck and cannot resume your trial.
however, you can download a trial and test your luck,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How can I install a new operating system in a D.A.P Jukebo

Hello everybody !
I have a D.A.P JukeBox with a 20 Gb hard disk. But i have broken in an accident Jukebox's hard disk and I have brought a new 40 Gb hard disk but i don?t know how can i install the operating system.
When i start my D.A.P JukeBox i recieve the following message: "Critical Error, Could not load OS"
how can i solve this problem ?
which are the programs i need ?
where can i find them ?
Thanks !
Dani ;-)

I would recommend using the easy bootcode flasher method.

How to Recover a running composites after system crash?

The Weblogic server has unexpected restart while some long-time composites were running.
After Weblogic started again, those composites had state "Running". But nothing changes. They never neither finish neither fault.
Is there a something necessary to configure in weblogic, or composites to successfully continue all running composites after system start-up after a crash?

Hi there,
please have a look at http://download.oracle.com/docs/cd/E15586_01/integration.1111/e10226/bp_mang.htm#BABCEIBC.
In section "13.4 Performing BPEL Process Service Engine Message Recovery" you can read how a manual recovery of undelivered invoke or callback messages due to a transaction rollback in the process instance can be performed. Please have a look an let me know if it helpful for you.
Best regards,
Danilo

How do I install additional locals after installation of Solaris 10?

Hi,
I installed Solaris 10 withouth choosing to add Norwegian locale. I really don`t care for Norwegian messages, but it seems that X will not let me choose norwegian keyboard layout if I don`t install the Norwegian locale. My question is: How do I install the Norwegian locale after initial installation?
locale -a gives me:
C
POSIX
iso_8859_1
And I guess I need no_NO.

If you are using a graphics terminal you may want to try using the "prodreg" utility, as root?, to add en_US support. It appears to involve numerous packages, at least for 64 bit support.
Good luck,
John

How do I install Backup Now EZ software?

QuestionHow do I install the Backup Now EZ software from my new portable hard drive to use the hard drive as a backup for my computer?
AnswerINSTALL Backup Now EZ software:
1. Connect the Toshiba hard drive with the Backup Now EZ software to an available USB port on your computer.
2. A window automatically appears asking if you wish to install the software. Click Install Backup Software to install the Backup Now EZ software. If you do not see this screen, click Run from the Start button on the Taskbar and in the dialog box type "D:\setup.exe".
NOTE: “D” is the drive letter of the CD-ROM drive that contains the Backup Now EZ software. The drive letter may be different depending on your system configuration.
3. Click OK to execute the Setup program.
4. Select the language for the software and click OK to continue.
5. Read the END-USER LICENSE AGREEMENT FOR SOFTWARE and select the radio button to accept the terms of the license agreement. Click Next to continue with the installation of the Backup Now EZ software.
6. Choose the computer system for the external hard drive. Click Next to continue.
7. Click Next or the Browse button to choose a different installation directory.
8. Backup Now EZ is installed in the target directory. Backup Now EZ program group with the appropriate shortcuts are added to the Start menu.
9. You will be asked to restart your computer. The Setup Complete dialog allows you to reboot now or later. It is recommended to select the Yes, I want to restart my computer Now option and click the Finish button to reboot your computer.
NOTE: You must have administrator rights to install Backup Now EZ on machines running Windows® 2000/XP/Windows Vista®.
To uninstall the Backup Now EZ software:
1. Open the Control Panel..
2. Double-click the Add/Remove Programs.
3. From the Install/Uninstall tab, select Backup Now EZ from the list of programs installed on your computer.
4. Click Add/Remove...
5. Click Yes to confirm the removal operation.
6. Click Finish when the uninstall process is complete.

Error "Windows Installer service could not be accessed" occurs when you try to add or remove a progr...
-Jerry

Time Machine forces a Full backup (173GB) after System restore.

Hi,
Just restored my system from the latest backup in Time Capsule. Now Time Machine want to backup the whole disk again (173GB) although the changes between the current status and the latest backup should be minimal.
Is this the normal behavior?, I would rather avoid the full back up if there any way to do it.
These are the logs. First it says that the "Event Store UUIDs don't match". I'm not sure this is really normal, because I didn't swap hard drives or anything so I assume that the Event Store UUIDs should match.
Then it says that the size of the backup is 173.86 GB.
[October10] [October 10] 10:37:18 AM com.apple.backupd[1196] Starting standard backup
[October10] [October 10] 10:37:35 AM com.apple.backupd[1196] Network destination already mounted at: /Volumes/Time Capsule
[October10] [October 10] 10:37:45 AM com.apple.backupd[1196] Disk image /Volumes/Time Capsule/Rubén Laguna Macías’s MacBook Pro_001ff3524896.sparsebundle mounted at: /Volumes/Backup of Rubén Laguna Macías’s MacBook Pro
[October10] [October 10] 10:37:45 AM com.apple.backupd[1196] Backing up to: /Volumes/Backup of Rubén Laguna Macías’s MacBook Pro/Backups.backupdb
[October10] [October 10] 10:37:57 AM com.apple.backupd[1196] Event store UUIDs don't match for volume: Macintosh HD
[October10] [October 10] 10:38:00 AM com.apple.backupd[1196] Node requires deep traversal:/ reason:must scan subdirs|new event db|
[October10] [October 10] 11:32:39 AM com.apple.backupd[1196] No pre-backup thinning needed: 173.86 GB requested (including padding), 380.26 GB available
[October10] [October 10] 11:37:57 AM com.apple.backupd[1196] Copied 83.6 MB of 143.7 GB, 3581 of 285647 items
[October10] [October 10] 12:57:59 PM com.apple.backupd[1196] Bulk setting Spotlight attributes failed.
[October10] [October 10] 12:58:24 PM com.apple.backupd[1196] Copied 95.2 MB of 143.7 GB, 101822 of 285647 items
[October10] [October 10] 1:58:30 PM com.apple.backupd[1196] Copied 8.9 GB of 143.7 GB, 289125 of 289125 items
[October10] [October 10] 2:02:32 PM com.apple.backupd[1196] Copied 291414 files (8.9 GB) from volume Macintosh HD.
[October10] [October 10] 2:03:26 PM com.apple.backupd[1196] No pre-backup thinning needed: 2.22 GB requested (including padding), 371.79 GB available
[October10] [October 10] 2:07:38 PM com.apple.backupd[1196] Copied 3601 files (626.5 MB) from volume Macintosh HD.

Matthew Connolly3 wrote:
Same problem here. Same machine. Restored from TM drive back to computer - worked fine doing incremental backups immediately after the restore, but now 2 days later, it wants to do a full backup and has gone and deleted all the older incrementals
Not quite the same problem, as your full backup wasn't the first one after a full restore. Whether it's related or not is anybody's guess.
Click here to download the +Time Machine Buddy+ widget. It shows the messages from your logs for one TM backup run at a time, in a small window. Navigate to the backup in question, then copy and post all the messages here. They may contain a clue.
Also see #D3 in the Time Machine - Troubleshooting *User Tip* at the top of this forum for the main known reasons TM will do a full backup.

Resoring partial backup after system recovery?

HP Pavillion D4990y
Vista Ultimate X86 at SP2
Had to do an HP System Recovery (F11 during POST). Chose to do a partial system backup (creates *.zip files) to an external HDD and followed instructions. After recovery, cannot restore.
This seems to be a widespread problem when trawling the WWW.
What's the trick, here? I can get the User files back, but I surely would like to restore the software and other programs added after purchase.

AlphaBeta wrote: HP Pavillion D4990y Vista Ultimate X86 at SP2 Had to do an HP System Recovery (F11 during POST). Chose to do a partial system backup (creates *.zip files) to an external HDD and followed instructions. After recovery, cannot restore. This seems to be a widespread problem when trawling the WWW. What's the trick, here? I can get the User files back, but I surely would like to restore the software and other programs added after purchase.
Hello AlphaBeta, Anytime you do a HP Recovery Restore, it is always recommended to perform a backup first, of your important data. There is always a risk that something may go wrong when performing a HP Restore Recovery.
HP also recommends performing a destructive recovery, that will format the hard drive and wipe the hard drive clean.
I have never used the method you mention, but if you have access to some zip files, you may be able to unzip these files and gain access to the files in the zip package.
Just some thoughts.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

How can i rename a disc after i've burnt it?

i've been burning a couple of DVD's in finder and have named the title of the disc when prompted to, before the initialisation of it. but i accidently skipped the option on the discs after that. i am making copies for a friend a would like them to be able to differentiate between the discs. is there anyway to rename the disc again?

Hi irav,
unfortunately no,
just redo one of them and name it accordingly.
or if you use printed label or lightscribe for the disk, just print the correct name on that surface.
Good Luck.

How to re-install backup discs after system recovery on pavilion 2201 wdows 7

Similar Messages

Maybe you are looking for