How to re-install windows from disk

Hi
I have taken lenovo rescue recovery to my external drive sometime ago.
I am planning to upgrade my HDD to SSD and would like to re-install windows freshly from factory recovery.
However, when i tried to create rescue media, it was complaining "Only one Microsoft windows copy" in the system.
This seems due to previous factory backup taken to my external drive.
Now, i want to use the external drive to re-install windows. Please help me how do i re-install after fixing my SSD
Thanks in advance

You should have made a bootable USB in the rescue process. After installing the new SSD, boot into that USB with your external drive (with the data part) plugged in. It may also be possible that the external drive is also the bootable drive, which makes things easier.
After that, you should be in the Rescue and Recovery environment, where you can restore the factory copy of Windows onto your new SSD.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Similar Messages

How do I install windows from USB on Macbook pro 3,1

How do I install windows from USB on Macbook pro 3,1 ?
My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
- My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
After rEFIt I booted and then I got this error:
Starting bootmgr.efi
Error: Unsupported while loading bootmgr.efi
I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
Point: Nothing is wrong with the windows software, and windows runs fine.
I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
rEFIt - Booting Legacy OS
Starting legacy loader
Using load option ´USB´
Error: Not found returned from legacy loader
Error: Not found from LocateDevicePath
(x 9 times)
Error: Load Error while (re)opening our installation volume
The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
(Hey Apple please send out a updated firmware that fix this issue?!)
So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ? Or just run windows on the mac and forget about mac software ? What a stupid solution...

There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
This is 5 page thread, so a little more 'meat' to it:
https://discussions.apple.com/thread/3410900?start=60&tstart=0
And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
What you have here seems to be everything and everyone is excluded unless there is a mac-model device ID string that specifies yes. An unnecessary hurdle.

How do I install Windows from USB?

I have a 2011 MacBook Pro. I replaced the optical drive with a second hard drive. I have tried the following methods to install Windows.
Installing from an external optical drive: I created a Windows 7 install disk. The windows installer does not start. All I see is a blinking cursor. The disk is recognized when I hold option/alt at startup, but when selected it hangs at the blinking cursor.
Installing from a flash drive: I burned the image to a USB flash drive. The windows installer does not start. The the disk is not recognized when I hold option/alt at startup.
Do I have to do something to enable USB startup? Is there another installation method available?
Thanks.

On MBPs that came with built-in Optical drives, BC Assistant modifies the NVRAM settings and sets the boot option to be the Optical drive. Removing the Optical drive breaks this logic and causes a lot of problems. Modifying the Bootcamp info.plist allows USB creation workaround, but does not allow the NVRAM modification. This is derived by BCA using the Model Identifier in System Profiler.
Your situation is similar to Need help installing Win8.1 from USB on MBP. or Unable to Install Windows 8 on secondary Hard Disk.
The only solution I know is to move the drive that needs Windows to the main SATA connector, install Windows and then move the drive back to the Optibay.
If you have two Macs, one of which have the original HW configuration, than using Winclone is another option by installing it on an "unmodified" MAC and then cloning it to the "modified" Mac.

How do I install software from disk on Macbook Air?

I have an external CD player but the Macbook Air doesn't seem to recognise it. So how do I get my software from disk onto my Macbook?

I did not get the "This document is not recognised do you want to choose an application to open it with" error message. It's just that it is not recognizing any content at all on the CD in Finder. I have used this external CD drive before with this Macbook. I also tried to open the docs through Word and it again showed that a CD was in "Devices" as a "Remote Disc" but does not recognize any of the docs on the CD.

How do I install Cs3 from disk, after trashing the trial version?

I've made the mistake of trashing the trial version of Cs3 that I had on my imac a few years ago.
Now I'd like to install photoshop cs3 on my imac as my other computer is out dated and I get the error message that CS3 is conflicting with CS3 on the computer.
I realise it was a mistake to trash the trial. Is there anything I can do?

Download the cleaner tool from the following location and select "CS3" from the pop-up menu. http://www.adobe.com/support/contact/cs5clean.html
It will show you all CS3 products installed on your machine and will also allow you to remove them selectively. Select the trial build and click "Cleanup".
Or if you have no other CS3 or CS4 application installed on your machine you can just click "Clean All CS3/CS4" to clean your machine.
Then try to install Photoshop CS3.

How do I install windows 7 from a USB on start up?

I hold alt when I hear the start up sound and select the usb. As soon as I hit enter, the cursor freezes and it remains on this screen for a long time. Is there a way around this?
I tried to install it through bootcamp assistant, but it doesn't give me the option to install it, only partition the drive.
Sorry about the photo being upside down. I couldn't do anything about it.

Will the option appear if I put a windows 7 installation disc into the dvd drive?
I followed these steps that would allow me to boot from a USB with my version, so I do see the option there.. is it still not possible?
Lior’s solution to no-bootup option for your USB drive Windows installation disk in Bootcamp Assistant (thanks Lior!):
If you have only 2 options in the boot camp assistant, or if bootcamp doesn’t recognize the windows installer disk when its on a bootable usb, it’s because bootcamp doesn’t recognize your macbook as a model that should install windows from a USB, its actually quite easy to fix, just follow these simple steps:
1. go to Applications>Utilities> right click on boot camp and click Show Package Conents, you’ll find a folder inside called Contents (If i remember correctly, not on my Macbook atm). Inside that folder exists a file called info.plist.
2. Right click on the folder containing the file > get info > change permissions so any user can read & write. Do the same for the file itself (right click > get info…).
3. Right click on info.plist and choose Open with > Text Edit.
4. at the end of the document theres a list of strings that contain different versions of Mac computers, the list is titled something like: “USB boot Versions”, add your Mac’s version to the string list ( MB40 ) if your version is Macbook 4,1 (you can see this by clicking on the System information App in the Utilities folder).
5. save the file and change back the permissions on the file and folder.
Now open boot camp and you should see the option to create a Windows 7 installler on a USB, and also bootcamp will look for a windows installation on any USB’s after you partition the hard drive.

How can I install windows 7 in bootcamp from the install CD using superdrive

Hey Guys.
I'm a pilot and want to use flight simulator X which is a windows only program. So what I want to do is use bootcamp but when I go into bootcamp assitant I cant partion or install windows from the install CD its asking for a ISO file the following error occurs. "There is no USB drive connected to the system. Please insert a USB drive to continue " but the thing is I dont want to install from USB I want to install from USB Super Drive with the Installation Disk
Thanks

Make sure that the option to create a USB installation drive is unticked. Also, Boot Camp Assistant allows you to download the Windows support software onto a USB drive, that you will need after installing Windows to make the computer run correctly. You should do that.
Apart from that, you should be able to continue with the Windows installation. Follow the Apple's steps > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf

Cant install software from disk. Terminal window opens with a logon and bash message?

I cannot install software from disk & in some cases download.
If any software disk is inserted the terminal window appears.
The Disk has to be clicked to open the contents but install files or package files show as a blank doc and not the usual yellow package icon.
All that shows is a log on message in the terminal window, but nothing about install.
I thought Drive issues but the drive plays audio and DVD perfect
I cannot install:-
Office for mac updates
Live Interior 3D (managed to install from download)
ION Audio Converter
This has only come to my attention in the last couple of weeks.
The machine is a late 2011 with Lion installed

Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.

Re: How to install Windows from recovery media on a new hard drive?

Immediately after a Windows update, my computer would not restart. It said disk error.
I could not start it from the recovery media and F8 would not work. I bought and installed a new hard drive. Now when I put in the recovery media to install Windows on the new hard drive, it gives an error message.
What can this be? Should I be able to install Windows from the recovery media?
It is Windows 7 and the laptop is Satellite A500, 64 bit.

Hello
Generally speaking you can install recovery image on every compatible HDD so thee should not be any problem about it.
Please tell us what happen when you start recovery installation. Which error message is shown?
Is new HDD recognized in BIOS. Before you start recovery installation set BIOS to default settings.

How to install software from disk onto imac

how to install software from disk onto imac

Are you using one of the newer iMac's with no DVD drive? If so, you can either get an external CD/DVD drive (any make - doesn't have to be Apple) or, if you have another Mac on the same network that has a CD/DVD drive you may be able to do it by turning on 'DVD or CD Sharing' on that Mac (System Preferences>Sharing). Hopefully you'll see the disk on the Mac without the DVD drive and be able to install from there.

HT1846 gtp error while installing windows from usb! how to solve it.

gtp error while installing windows from usb! how to solve it.

Hello mmarti,
Thanks for using Apple Support Communities.
Please ensure you are following the Boot Camp installation guide, as you should be selecting the partition named "BOOTCAMP" when you are at the Windows installer screen. See page 6 of the following PDF:
http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
Take care,
Alex H.

How do I install windows using BootCamp without cd drive fot the new MBP?

I need some softwares for my work (modelsim, altera, ltspices etc) but some of them only supports windows.
New MBP doesnt seem to have a cd driver.
How do I install windows using bootcamp without cd drivers?

You can use a USB thumbdrive to do this, assuming you have access to a windows machine to format the usb stick.
I installed Win7 on my MB Air (2011), which of course lacks a DVD drive altogether, using this technique.
Basically, you download a tool called rEFIt to your macbook. ( http://sourceforge.net/projects/refit/files/rEFIt/0.14/rEFIt-0.14.dmg/download ) When this is installed, it gives you a boot selector menu when you boot the Macbook ('Do you want to boot to MacOS or to the USB drive?')
Then you download and run an Apple tool called Boot Camp Assistant, which allows you to partition your HD for the two operating systems to share; it also pulls down all the windows drivers you need.
Then prep the USB thumbdrive on a windows machine to be a Win7 installer disk. You'll want a drive in the 4gb+ range I think. You have to set up the thumbdrive to be bootable (lots of tools for that available), and then copy all the windows installation files over to it.
Put the thumbdrive in the macbook and boot holding down the option key.
Choose the rEFIt icon on boot, then choose to boot from the thumbdrive, then format your new windows partition to something Win7 can handle, and install windows.
On my machine I followed a slightly more involved process and wiped out MacOS entirely. I would have kept it on a small partition if I'd had a bigger hard drive.
If you need super detailed instructions, CNET has some here:
http://howto.cnet.com/8301-11310_39-20020513-285/install-win-7-on-macbook-air-fr om-a-usb-drive/
Tech-Recipes has some similar instructions here:
http://www.tech-recipes.com/rx/9136/macbook-air-install-windows-7-with-boot-camp -without-an-external-dvd-drive/
If you have any issues after trying this, ping me and I may have solved them when I went through the same process.

How do I install windows 7 drivers correctly on my macbook pro retina?

I've installed Windows 7 Ultimate (64 bit) twice now, and each time I get on, none of the bootcamp drivers seem to be installed correctly. This means I can't access the internet because a network adapter isn't present, and I can't play games because the NVIDIA drivers aren't there. I've seen other people have had this problem in the past, but their fix was to download bootcamp 3.x from Apple's download site, but obviously that doesn't work now as the version is newer.
Does anyone know how to correctly install Windows so this doesn't happen, or how to get the drivers installed correctly?
Thank you very much for your time

For 2 reasons, and they are about the hardware.
1) Apple/Mac and BC restrict the way you use the computer. Maybe not for you but for me. It does not allow you to create any other parttitions for Windows to use. You can't even re-partition the BC partition into 2 drives. That will HOSE the Windows system and maybe the OS X part.
2) Apple/Mac does not allow the use of all the hardware. You can not use both graphic cards. switch between them. Windows Must use the descrete graphics adapter which cause the system to run hotter. This is a limitation imposed by Apple as with Reall Windows PCs that have both the Interl embedded and add-on descrete graphics you can switch between them.
Actually BC 4 has been out since Lion shipped on new Mac's. BC 4 also restricted the installation of Windows to just Win 7, no more XP. Which was what you could do with Snow Leopard and BC 3
Message was edited by: Shootist007

How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?

How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
My optical drive is non-functional and I want to dual boot with win7. The only problem is my macbook does not boot from USB at all, even when I hold th ALT key down when it is starting up.
-I have a flashdrive with win7 on it.
-I mounted the ISO of win7 with toast for bootcamp to do its thing.

Good luck.
Consider this a bump so that hopefully someone with better news spots your thread.
Allan

How do I install PS from CS 4 discs?

Ok, this may be the dumbest question of the day.
I have student version of CS 4 with three discs - App 2, Content and Learning.
I put each of the first two in the CD drive and it spins but no install message.
I look at the top files: AUTORUN & an icon but they do not execute.
I go down into the follders below and I find an install PS program.
When I execute it, it says I need to use Setup.exe.
I search the disc for setup.exe and there is none.
So, how do I install PS from CS 4 discs?
Thanks,
Frank

Frank,
Are you inserting the first disc?
Can you click on AutoRun and launch that manually?
Are there any executables in the root folder? If not, look in the Language folders, say US En, or whatever you are going to want to install as.
If you still cannot find any executable, can you post a screen-cap of your #1 Disc open in Windows Explorer/My Computer?
Also, this is a general CHECKLIST for installing most Adobe programs.
Good luck,
Hunt

How to re-install windows from disk

Similar Messages

Maybe you are looking for