How to re-render a modified title clip?

I made a title clip in Motion, rendered and loaded in FCPX. Now I have modified it in Motion and rendered again (IN MOTION) with same name, so it replaced the old file.
Now, I see that FCPX reads the old clip yet (probably it reads the old rendered file).
It seems it cannot realize that the clip has changed in its internal contents...
How can I tell FCPX to re-render the modified clip?

Make a change. Push the opacity down. Push it up. Not undo. If you modify a file in Motion, export with a new name and thn relink to the you new file.

Similar Messages

How can I compensate for what a transition takes from a title clip?

I'm putting together, in iMovie 4, a slideshow, consisting entirely of clips from the Photo Pane. I imported my clips to the Viewer, then added cross-dissolve transitions, except where I wanted to create a title. Some clips have the Ken Burns Effect.
Here's the problem: after I add a title clip, then add transitions in front & back of it, the title clip's duration reduces. With the title highlighted, I go back into the Title Pane and increase its duration, but the transition bleeds off the increase, as it re-renders, every time. There's no problem updating a photo clip between two dissolves.
The cross-dissolves are about 1:20 in duration. I want my title clips to be about 2:10 or so. There's also the problem with title clips that their total duration is a combination of speed and pause. So adjusting their duration is complicated, once I get the total duration I want, but then have to try compensating for what the transition will take away.
Has anyone solved this problem for themselves, & if so, what do they suggest?
HAPPY NEW YEAR!
David

What if you put a photo down for a set duration, and
then put the same photo down back to back with the
first one, and use the second one to make the
transition with? Then of course, use a "transition"
photo for the next clip, and then back to back with
it, with a secondary clip of the same photo to last
the desired duration before you go on to the next
clip, with a third but same photo dedicated to make
the transition with? And so on...
Your suggestion has helped me in other ways by introducing me to the concept of adding clips to solve problems. I won't get into the details. Lennart, some time ago, suggested the same thing in another context, which worked, but I didn't transfer that knowledge, until now. Thanks.

How do I join multiple (short) audio clips into one single long audio clip in Premiere Pro CS5?

Hello,
The question is in the title but I'm wondering how I can join multiple (short) audio clips into one single long audio clip in PP CS5.5. I put all my short clips right next to each other and selected all of them to see what options are available by right clicking and using the toolbar options at the top. The closest that I got was to nest the sequence, but that's not what I really want.
I'd like to merge all the short clips into one single (long) audio file to use under the video.
Thoughts are welcome and greatly appreciated.
Thanks,
-Melvin

O.K. This is kind of fundamental and you will need to learn up on this fully ...but for now...
Make sure you have the WAB ( work area bar )covering the length of the audio clips. ( You do not need to select them)
Go to the File Menu> Export Media
You will be given all the Export Options. Choose Wave File
Select option for Export Work Area.
Choose where to export the file to ( HD location)
follow your nose from there....
http://tv.adobe.com/watch/learn-premiere-pro-cs5/exporting-with-adobe-media-encoder/
BTW - Why are you taking the audio to Audition anyway? What are you going to do to it.

How can i remove the page title above the File,Edit,View,History,Bookmark tab?

how can i remove the page title above the File,Edit,View,History,Bookmark tab in firefox

In Firefox 29 and Firefox 30:
"3-bar" menu button > Customize
In the lower left, click the Title Bar button to switch the title on and off.
In Firefox 28, I actually can't remember!
I would be remiss if I didn't remind you:
* Firefox 28 is not secure: Mozilla has disclosed its [https://www.mozilla.org/security/known-vulnerabilities/firefox.html known security flaws].
* You can modify Firefox 30 to restore many of the UI features of earlier versions of Firefox using the techniques in the following article (and/or with assistance from forum volunteers): [[How to make the new Firefox look like the old Firefox]].

Kdenlive not rendering with title clip

After doing a system upgrade kdelive will no longer render my project, which rendered fine before the upgrade. After I click render, it either gets stuck in "waiting" or it gives an error saying that rendering crashed. If I turn off the title clip, rendering proceeds as normal. Looking around I saw some people with similar problems fixing it by running kdenlive as root, but in my case that didn't solve anything. Anyone have any ideas?
The kdenlive profile I'm using is HD 1080p 59.94fps and I'm trying to render an H.264 video (although trying other formats encounters the same problem).
Some relevant package info:
[root@labby ~]# pacman -Qs kdenlive
local/kdenlive 0.9.6-2
A non-linear video editor for Linux
[root@labby ~]#
[root@labby ~]# pacman -Qs ffmpeg
local/ffmpeg 1:2.1.1-1
Complete and free Internet live audio and video broadcasting solution
local/gstreamer0.10-ffmpeg 0.10.13-1 (gstreamer0.10-plugins)
Gstreamer FFMpeg Plugin
[root@labby ~]#
[root@labby ~]# pacman -Qs mlt
local/mlt 0.9.0-5
An open source multimedia framework

Have you upgraded the system?
I had this same problem until yesterday, only kdenlive did not render at all, with or without title clip. Googling about it, I think it was some kind of conflict with mlt and opencv. Opening kdenlive as root did not work for me. I initially downgraded to the previous version of mlt (0.9.0.1 if I remember cforrectly); with that I could render, but only without title clips present. Solution came with last update of opencv (and re-upgrade of mlt).
Also, while I was looking up this problem, I read about a similar bug being related to the sound, and installed ladspa (just in case all the previous doesn't completely solve your problem).
Last edited by Daerun (2013-07-14 13:52:30)

Premier After Effects... How does one places the whole movie clip into AF?

After years of using Premiere, I’m looking at using After Effects. Premiere does most of what I need (I don’t need moving graphics and titles) but the masking and rotoscoping seems to be better in After Effects. I’ve started a great video by Tom Green at school. This is probably silly question- I don’t understand is how does one places the whole movie clip into AF? I only see 30 seconds or so of the 5 minute clip on the timeline in AF.

Ahh, thanks. I simply add more minutes (the length of the clip) into the "new composition".
A new problem: When I try a dynamic link with premiere AE says “Failed to connect to adobe Premiere Pro Dynamic Link”, but PP will link with AE. I just installed AF last week. Do I need to uninstall and reinstall them (along with the rest of the Creative Suite)?

Removing excess from a title clip

I added a scrolling title clip to my project and used Clip Adjustments to make it 30 seconds, which made the scroll roll at a comfortable pace for readability. The problem is that iMovie added an extra 12 seconds of blank title screen after the last word scrolls off screen. How do I remove the extra time without affecting the scroll speed? Simply dragging the end of the clip shortens it, but it also speeds it up to an unreadable speed. If cropping is the answer, how do I do it? The Help dialog didn't help me. I'm not very adept in the use of iMovie, so please try to help me in simple language!

I found the answer to my question and many more at http://www.kenstone.net/fcphomepage/imovie_09stone.html#markers

Kdenlive fail rendering if title clips or images are in the project

Hi.
Thats what happen if I try to render a project with title clips or images inserted, whatever is the output that I choose. If I hide title clips and images, the project renders
I get a popup that says
Rendering of /home/pathtooutputfile aborted, resulting video will probably be corrupted
And what I see in the error log is a little different with the output I chose:
If I choose mp4 I get
[libmp3lame @ 0xb0510e20]
Channel layout not specified
[mp4 @ 0xb050ae40]
Encoder did not produce proper pts, making some up.
If mpeg2
Channel layout not specified
[mpeg @ 0xb050ae40]
VBV buffer size not set, muxing may fail
If vob
Channel layout not specified
[ac3_fixed @ 0xb0510e60]
No channel layout specified. The encoder will guess the layout, but it might be incorrect.
If mov
[mov @ 0xb050ae40]
Encoder did not produce proper pts, making some up.
I'm going crazy (a month ago everything worked fine).
Any suggestions?
I search and found this http://www.kdenlive.org/forum/rendering … lip?page=2 but no way (and I don't know if it is my issue)
(my english is not so good... sorry)
Thanksssssss

Have you upgraded the system?
I had this same problem until yesterday, only kdenlive did not render at all, with or without title clip. Googling about it, I think it was some kind of conflict with mlt and opencv. Opening kdenlive as root did not work for me. I initially downgraded to the previous version of mlt (0.9.0.1 if I remember cforrectly); with that I could render, but only without title clips present. Solution came with last update of opencv (and re-upgrade of mlt).
Also, while I was looking up this problem, I read about a similar bug being related to the sound, and installed ladspa (just in case all the previous doesn't completely solve your problem).
Last edited by Daerun (2013-07-14 13:52:30)

How do I make the menu title a different color when it is the active menu in Spry horizontal menu?

How do I make the menu title a different color when it is the active menu in Spry horizontal menu?
Dreamweaver CS5.5
Apple OS X.6.8
View site at: http://dorsay-easton-indian-law.com/staging/index.html
Steps:
1. Click link to land on Home page
2. View Home link in Spry horizontal navigation menu
Actual:
Home menu title is the same color as all of the others.
Expected:
The title of the active menu is color: #FFC.
I was hoping that a:active would give me this functionality, but that's not how it is described. Any suggestions are welcome!

Nothing I have tried in the template makes the BODY tag editable. That's why I'm wondering how to disconnect the template from the individual pages. Adding an ID to each body tag is a prerequisite of the how-to page you supplied.
You don't make the <body> tag editable in a Template.
You make attributes of the <body> tag editable.
Don't disconnect the Template from the child pages.
Specify editable tag attributes in a template
http://help.adobe.com/en_US/dreamweaver/cs/using/WScbb6b82af5544594822510a94ae8d65-7aa3a.h tml
In the Template:
Select the <body> tag (either in the Tag selector or click inside the <body> tag in Code View)
Modify > Templates > Make Attribute Editable
Select ID from the Attribute dropdown menu
If there's no existing ID attribute then click Add and type ID into the next dialogue box
Attribute: ID
Check the box to "Make attribute editable"
Enter anything into the Label field as a default e.g. foo
OK
Dreamweaver will change the <body> tag to read <body id="@@(foo)@@"....
Now the ID is editable
Save the Template and update the child page
In each child page:
Modify > Template Properties
Select the id attribute from the list (it's probably the only one listed)
Change its name in the box to whatever name matches your CSS rule for the active state for that page
OK
Save
Upload

Combining and Editing Sound in Titles Clip

Okay, now that I actually managed to capture the sound I wanted from my camera to my computer I am unable to find anything in the iMovie tutorial that explains how to get the sound and titles together AT ALL, much less exactly the way I want. How do you edit sound to coordinate it with picture? For instance:
1. Because of the nature of the capture device, I had to capture sound at the beginning and end of the clip that I didn't want to ensure I got ALL the sound I DID want. As a result, I want my opening titles sound to BEGIN at 1:23:28 and END at 1:59:17. I think the clip is almost exactly this length. If it's longer, and there's black screen/no sound for a few seconds at the end, FINE, but I don't want extra sound at the end of the audio clip spilling over onto the picture (titles). So how do I make sure that JUST this part of the clip ends up on the titles without recapturing it trying to cut it closer, and
2. How do I get the sound to play at the same time, in the same clip as the titles, at all? What is the exact process of putting picture and sound together?
Thanks for any replies. I'm off to work on the parts I do understand.

Although I can't find anything about combining picture and sound in the iMovie Tutorial, I did find something about shortening clips:
Keeping Only the Parts You Want
Edit clips in the timeline view
1. Click the Timeline Viewer button in the iMovie window.
2. Select a clip from the iMovie timeline.
3. Move your pointer to near the end of the clip and notice the pointer change to two arrows. This means you can trim your clip.
4. Drag your pointer toward the center of the clip and notice that the duration of your clip shortens as you move further to the left. You can see the new ending point in the clip viewer.
5. Stop dragging when you find exactly the frame you want to end your clip. Notice the right edge of your clip now displays a straight edge rather than rounded corners indicating an edit has been made.
6. If you change your mind and want to restore the clip to a longer duration, simply drag the edge to the right.
7. Repeat this process with the other end of the clip.
8. Save your iMovie project.
I don't see why in the world this wouldn't work just as well for a sound-only clip as a picture-and-sound clip. The only way I see of getting the out-of-sequence ones I want in the order I want is to either duplicate the clip and then shorten both clips, or delete the existing clip and recapture it as two clips--then shorten each to the length I want and somehow run them together in sequence. (Copying it into two clips would be faster and easier for me, but is it possible and does it make a difference?)
What I don't know is how to make it understand to put the three clips (these two shortened ones and the third I want to follow it) into ONE sound sequence, and then make it understand to run THAT sequence with the closing titles! How do I get each sound clip together with each other, then make it run together with each title clip I want? This has me at a loss. It would REALLY help if I could do this like TODAY! I will be DEEPLY GREATFUL to whoever can offer a CLUE!

How can I render an active link (yrl) within a UIX/XML page

How can I render an active link (url) within a UIX/XML page.
How can I get <jbo:ShowValue> to work in UIX/XML, or is there another way?
Bill G...

It may seem strange, but the <contents> of <rawText> aren't actually
raw - it's only the "text" attribute that's raw. (It seems strange because
it is. Ah well.) This is different from UIX JSP.
So, try something like the following:
<bc4j:attrScope name="Notes">
<contents>
<rawText text="<a href=""/>
<rawText>
<boundAttribute name="text">
<bc4j:attrProperty name="value"/>
</boundAttribute>
</rawText text="">"/>
Some text in the link.
<rawText text="</a>"/>
</contents>
<bc4j:attrScope>
Thankfully, this will be much simpler in 9.0.3, when the following
will work:
<link text="Whatever you want">
<boundAttribute name="destination">
<bc4j:attrValue name="Notes"/>
</boundAttribute>
</link>

How can I use OmniPortlet and Web Clipping Portlet?

How can I use OmniPortlet and Web Clipping Portlet?

You find information on OmniPortlet and Web Clipping in the Portal Developer's Guide.
o Building Portlets with OmniPortlet
o Building Content-Based Portlets with Web Clipping
Peter

How to change the default text title of Detached table/treetable

Hi,
Is anybody know How to change the default text title of Detached table/treetable.
I have already read the post on "http://vtkrishn.com/2010/07/28/how-to-change-the-default-text-title-of-detached-tabletreetable/"
as per this post It will change the title throughout the application.
I wanted to change only for one particular table.
Thanks,
Charu
Edited by: Charu on Sep 13, 2012 4:14 AM

Hi,
please don't double post and instead continue with your original threat. In the previous post you got the correct answer to use skinning. You did not like the solution as it doesn't allow per-instance titles. I agree with this and a logical consequence is to file an enhancement request instead of re-posting the question. I'll file the ER, so no need to follow up for you anymore
Frank

How can i make a transition between clips on cutaway?

how can i make a transition between clips on cutaway?

ninafromlisboa wrote:
But if I want ONLY fade out (or in) I can't do it...
OK, I understand what you mean now! I assumed you were asking about the normal Fade In or Fade Out using the transition from the Transitions panel. But I guess you mean the Fade function specific to a Cutaway. When you double-click on a Cutaway the Inspector opens. Here you can set the Cutaway Fade duration. But as you say, it only provides for both fade in and fade out as one operation - you can't set the fades individually (it's both or nothing).
BUT, try the method outlined by Karsten Schluter above. It will give you the same effect and will enable you to fade either side of the Cutaway (or add other transitions).
John

How can I re-locate the 'Title' box on the first slide of my slideshow??

how can I re-locate the 'Title' box on the first slide of my slideshow??

You can't. It's not a user controllable feature.
OT

How to re-render a modified title clip?

Similar Messages

Maybe you are looking for