How to re-size a brush in Elements 9

In Elements 6 I used to be able to re-size my brush and adjust it's angle by right-clicking the mouse.  In Elements 9 that doesn't work.  I have to go up to the brush option bar and click to do these adjustments.  How can I get to these settings by right-clicking my mouse?  I use a Mac with a magic-mouse, if that matters.
Thanks!
Dave

Nope, sorry. Not there. The circle isn't meant for changing size, incidentally, but for changing the shape of brushes (making them oval vs round, for instance) and for changing the orientation of brushes that aren't circles, like the leaf or flower brushes, or the rubber ducks. Right and left bracket is the conventional shortcut for simple resizing.
You could submit a feature request to get the Additional Brush Options back in that menu.

Similar Messages

  • I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?  Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?

    I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?  Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?
    Thanks,
    Shir

    sbmgrams wrote:
    I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?
    See here:
    Reading PhotoDeluxe PDD Files

  • How do I find out the size of each individual element within a photoshop file as need to replace some elements?  Thanks :)

    How do I find out the size of each individual element within a photoshop file as need to replace some elements?  Thanks

    What do you mean by "Elements"?
    Elements in a flat image or Layers?
    Could you please post a screenshot with the Layers Panel visible?

  • How do you size a picture in Photoshop Element 11

    How do you size picture's to be sent in a email? On the old version I could figure it out be now on this version I can find where to do this. Also how do you make a collogues in Photoshop Elements 11
    Thank you for your help, Jack Frowein

    if you are saving your image as jpeg and really dont care much about the pixel dimension and just worry about the file size, I think using lower jpeg compression ratio is a better option.  For example: if i want my image to have really small file size, I would simply use a lower jpeg quality(probably Medium or low) while saving the file.
    Another easy solution would be to use Save for web, which shows you enough save options to precisely control your file size and dimension

  • How programmatically set size of report element in Java

    In topic
    [How programmaticaly set size of some field?|How programmaticaly set size of some field?]
    someone changing programmatically report element, but I think this part of code
    is in .NET framework
    For example I mean something like following snippet
    BoxObject box = (BoxObject) reportClientDocument
    .getReportDefController().findObjectByName("headerBox");
    BoxObject newBoxObject=new BoxObject(box);
    Border border=new Border();
    border.setBorderColor(new Color(255,255,255));
    newBoxObject.setBorder(border);
    newBoxObject.setFillColor(new Color(255,255,255));
    reportClientDocument
    .getReportDefController().getReportObjectController().modify(box, newBoxObject);
    Why I think this is in .NET framework because java object "ReportClientDocument" don't have "getReportDefController()" method (I donu2019t know .NET).
    What I want to do, I want to take "Details" (part of report) and change size.
    If there is no way to take "Details" how can I take other report element e.g. Text Object

    Ernest,
    What enviroment are you working in? Because my ReportClientDocument object does have the getReportDefController method. How are you declaring your object?
    Try something like:
    private static com.crystaldecisions.sdk.occa.report.application.ReportClientDocument myRCD;
    BoxObject box = (BoxObject) myRCD.getReportDefController().findObjectByName("headerBox");
    Cheers
    Darren

  • Eraser tool in Photoshop CS4 acts as if it is transparent when on brush or pencil mode. Block acts like its not transparent at all but there are no options for opacity, flow or brush size. Whats wrong and how to I make the brush and pencil eraser erase co

    Eraser tool in Photoshop CS4 acts as if it is transparent when on brush or pencil mode. Block acts like its not transparent at all but there are no options for opacity, flow or brush size. Whats wrong and how to I make the brush and pencil eraser erase completely without having to go over it multiple times?
    It started randomly about two weeks ago and I thought it was a glitch that would just go away. But now I am getting sick of using only the block eraser on one size. Help?

    The easiest thing to start with is to reset the Eraser Tool.
    Right click on the Eraser icon in the tool options bar and then click on Reset Tool.

  • How can I size a photo 13X11 with elements 12?

    how can I size a photo 13X11 with elements 12?

    What is the size of the photo to start with, and what is the resolution? And, is 13x11 in cm. or in inches?

  • How do I change the brush size?

    I just started using CS6 almost 30 minutes ago, and the first problem I've found is that I don't know where to change the brush size. Can anyone help me?
    Thanks in advance.

    Hi,
    Select brush tool in the tools panel,on selecting the brush tool there are three extra options exposed at the end of the tools in the tools panel.  1: Brush Mode 2.Brush size 3.Brush shape.Click on brush size option to select the size.
    Thanks,
    Sangeeta

  • Brushes Missing in Photoshop CC - How Do I properly install Brushes in Photoshop CC?

    Hi, I bought some cool brushes for Photoshop CC and installed them, but a few days later I noticed they are no longer available in my brush presets. Where could they have gone? I did not reinstall Photoshop or do anything except quit Photoshop.
    Question:
    Can someone please give me a link or tell me how to properly install brushes (.tpl files) in Photoshop CC so they stay loaded in Photoshop. I also want to add to these brushes and keep a folder o my Mac so I can back them up. Any tips are appreciated. Thanks.

    Ronald Keller wrote:
    Your question confuses me: .tpl are not brushes. Brushes have an .abr extension.
    So how did you install the brushes you bought? Maybe we can find out what went wrong?
    Ronald, as you'll know .tpl files are tool presets.  Using a tool preset as opposed to a normal brush preset, lets you save additional features that are not available with a regular .abr file.   I don't know if he pioneered the technique, but John Derry is the person who introduced it to me via one of his Lynda.com tutorials.
    You can get a heads up from here, but I am sure Google will find more links.
    John Nack on Adobe : New Photoshop brushes from John Derry
    This is a JPG version of the PDF instructions for installing John's Brush tool presets.  Note that this particular set were for CS6, and I was only able to get about half of them working with 2014.2.2  It should at least give  the OP the file locations for a manual install.  Note also, you may need to click on the image to open it at full size, and that the file locations are not necessarily the same for CC.

  • How do I change my brush opacity in Photoshop CC 2014

    I can't change my brush opacity. I have the change brush hardness with HUD picker unchecked on my settings, but when I Alt+Right Click+Drag up or down, left or right, it only changes my brush size. How do I change my brush opacity?

    On Windows, Control + Alt + up/down changes Opacity.
    Gene

  • How do I open slide show in Elements 7.0

    when I click on slide show the organizer loads and then it tries to load slide show but all I get is a warnig from IE that slide show can't load and then it quits loading and freezes the organizer so that I need to close it through the task manager. I have changed preferences and it did not help.

    I had already tried a new user account and that did not work. I just reinstalled Photoshop elements and that did no good. I also reset preferences and that did no good. I just now tried to set up my 1st album I created and it sent me the same message not from IE but I am attaching a screen shot of the error message. I also installed the program on my laptop that is running Vista and the slide show works fine but it will not let me set up Premier for some unknown reason. Also my kodak printer will not print the photo size (6x4) when it is selected. I have to print it out using Kodak programming or with my old version of Adobe photo shop. The old version however does not recognize some of the new fangled things used in the 7.0 version. I may have used the wrong description of the error message, but the  screen shot will show who is sending the error messages.
    Date: Sat, 1 Aug 2009 17:22:01 -0600
    From: [email protected]
    To: [email protected]
    Subject: how do I open slide show in Elements 7.0
    You broke your filetype associations. IE should not launch when you open a slideshow. it previews in the organizer itself. Either that or you broke your registry. Try uninstalling the software and reinstalling. (no you will not lose all your pictures or work.) If that doesn't work, try creating a new account on your computer. If you are unsure of how to do that, call your computer manufacturer, do not call Adobe, they are closed on the weekends, for support.
    >

  • How do I make the Brush Tool remember settings for each new stroke?

    Using
    Windows 7 x64
    Illustrator CC 2014
    I'm finally attempting to draw directly in Illustrator and already want to shoot myself.
    How do I make the Brush Tool remember stroke size and profile?
    I need each stroke to be tapered at both ends and be a certain stroke size.
    But each stroke I make, I have to edit that one path  to be correct.
    What gives?

    Got some results today so I'll share.
    Thanks again for reminding me about the 'basic appearance setting'.

  • How change a size in that way?

    I would like to change size of a few elements, but not in the center of each of them but to the left bottom side. How to do that? I can do that only by pre-composing. But I don't want to do that every time for that little thing. For better undertstanding I recorded a movie where I show this problem.

    Move the anchor points of each layer to the bottom left corner using the Anchor Point (Pan Behind) tool or add a null to the comp, position it where you want the scale to start from, parent all the layers you want to scale to the null and scale the null.

  • How do I use the brush to paint in latest version of Photoshop CC ?  I have a MAC with OS 10.10.2

    How do I use the brush to paint in latest version of Photoshop CC ?  I have a MAC with OS 10.10.2. 
    I clicked the brush tool, then clicked on color swatch that brought me to the colors and clicked OL... but not able to get the color I need.

    Well if I follow him, he creates an Exposure Adjustment Layer.
    Then he cranks up the Exposure, lightening the entire body, which he does not want. It's only the head.
    So leaving the Exposure set to where he put it, he selects that adjustment layer, clicks on that white thumbnail mask first, then paints
    using the brush and black. What this does is "hides" or Masks the exposure effect where he paints, it doesn't paint the picture black.
    He finds having to "mask" the entire body a lot of work. So he changes the mask to black by inverting it, and changes the swatch to white.
    Then being sure the black mask thumbnail is selected, he paints the head with the white color, punching a hole in the mask so the exposure setting comes through on the face.
    Does that make sense?

  • How to get the values of all elements and sub elements from  following xml

    how to get the values of all elements and sub elements from following xml...
    <?xml version="1.0" encoding="UTF-8" ?>
    <List_AML_Finacle xmlns="http://3i-infotech.com/Cust_AML_Finacle.xsd"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://3i-infotech.com/Cust_AML_Finacle.xsd List_AML_Finacle.xsd">
    <TransactionID>TransactionID</TransactionID>
    <Match>
    <Src_Matched_Field>Src_Matched_Field</Src_Matched_Field>
    <List_Matched_Field>
    <FSFM_Matches>
    <NUMBER>NUMBER</NUMBER>
    <TERROR>TERROR</TERROR>
    <TU>TU</TU>
    <NAMEU>NAMEU</NAMEU>
    <DESCRIPT>DESCRIPT</DESCRIPT>
    <KODCR>KODCR</KODCR>
    <KODCN>KODCN</KODCN>
    <AMR>AMR</AMR>
    <ADDRESS>ADDRESS</ADDRESS>
    <SD>SD</SD>
    <RG>RG</RG>
    <ND>ND</ND>
    <VD>VD</VD>
    <GR>GR</GR>
    <YR>YR</YR>
    <MR>MR</MR>
    <CB_DATE>CB_DATE</CB_DATE>
    <CE_DATE>CE_DATE</CE_DATE>
    <DIRECTOR>DIRECTOR</DIRECTOR>
    <FOUNDER>FOUNDER</FOUNDER>
    <TERRTYPE>TERRTYPE</TERRTYPE>
    </FSFM_Matches>
    <OfacMatchDetails>
    <UID>UID</UID>
    <TITLE>TITLE</TITLE>
    <SDNTYPE>SDNTYPE</SDNTYPE>
    <REMARKS>REMARKS</REMARKS>
    <ID_UID>ID_UID</ID_UID>
    <IDTYPE>IDTYPE</IDTYPE>
    <IDNUMBER>IDNUMBER</IDNUMBER>
    <IDCOUNTRY>IDCOUNTRY</IDCOUNTRY>
    <ISSUEDATE>ISSUEDATE</ISSUEDATE>
    <EXPIRATIONDATE>EXPIRATIONDATE</EXPIRATIONDATE>
    <ADDRESS1>ADDRESS1</ADDRESS1>
    <ADDRESS2>ADDRESS2</ADDRESS2>
    <ADDRESS3>ADDRESS3</ADDRESS3>
    <CITY>CITY</CITY>
    <STATEORPROVINCE>STATEORPROVINCE</STATEORPROVINCE>
    <POSTALCODE>POSTALCODE</POSTALCODE>
    <COUNTRY>COUNTRY</COUNTRY>
    </OfacMatchDetails>
    </List_Matched_Field>
    </Match>
    </List_AML_Finacle>

    avoid multi post
    http://forum.java.sun.com/thread.jspa?threadID=5249519

Maybe you are looking for