How to reach an Oracle BI Server (client 1) from another client (client 2)

Hi all, I'm new to the BI EE's world and I have a connection's problem.
I have installed Oracle BI EE 10.1.3.3.2 (Complete installation - all component) & Oracle 10g DB on my pc (pc 1). The BI server is started.
..and then another colleague of mine installed only Oracle BI EE 10.1.3.3.2 (Oracle Business Intelligence Client Tools) on her pc (pc 2).
Now, from the pc2, with Oracle BI Administration Tool we want to have access to the Oracle BI Server installed on the pc1.
Now, my question is this:
Which steps I have to follow in order to open a repository located on the pc1 with Oracle BI Administration Tool located on pc2 ? I know we have to modify the NQSConfig.INI file...but HOW ?
Any helps will be appreciated
Alex

Hi,
If you want to open the rpd in offline mode, just open the .rpd file sharing the server's folder. In online mode you need to create an odbc to the server, in System DSN, choose the OBI EE driver, port, login etc, when you click in the open online icon, you will be able to choose the ODBC.
Regards.

Similar Messages

Can I use Oracle Report Server to print from APEX? How?

Hello, we have Oracle Application server, Oracle Report server and now we just installed APEX and doing a pilot project. Since we don't have BI Publisher, how can we use our Oracle Report server to print from apex report? Can it be done and if yes where can I get some detail info that I can share with our DBA?
I have in past asked questions about the printing issues but I have been refered to http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html#01 section 5 which talks about another installation.
Thanks so very much for any info.
-iahmadi

You can use FOP, but the formatting of the xsl (Xml Style Sheets) takes a little work. If you have the Oracle Reports server up and access to the development product, why not go that route?
You want the filtering and sorting and searching, yes, but then you also want to print them out.. Then you would probably be best looking at replacing the Oracle Reports setup with BI Publisher. You can convert Most your reports over to bi publisher layouts easily.. (I have heard of some reports that do require recreating in Bi Publisher from Oracle Reports..)
Then you can have your Apex Reports and call Bi Publisher from APEX and everyone wins..
Is your Oracle Reports stuff used by non-APEX applications, that could be modified to use Bi Publisher?
Thank you,
Tony Miller
Webster, TX

How to refer the trigger written in one form from another form ?

How to refer the trigger written in one form from another form ?
Thanks,
Ravi Shankar

Try to convert the PL/SQL code from Forms trigger into a PL/SQL library(.PLL),
and then attach that PLL in your forms.
Note that all Forms objects should be referenced indirectly, for example,
you have to rewrite
:B1.DEPT_CODE := :B2.DEPT_CODE;
:B3.TOTAL_AMOUNT := 100;
==>
copy('B2.DEPT_NO','B1.DEPT_NO');
copy('100','B3.TOTAL_AMOUNT');
This is the best way to share PL/SQL code among Oracle Forms.

How do I pass parameter to different portlet regions from another page?

How do I pass parameter to different portlet regions from
another page?
I have a page that with two regions. Each region has a report
that uses the same information to generate its report.
Individually running the reports, I can use p_arg_names and
p_arg_values to get what I want. However, when I run the page
that has both portlets, my .show is gone and I cannot get it to
use the p_arg_names, etc. Do you have any idea how to overcome
this? Thanks for any help.

How do I pass parameter to different portlet regions from
another page?
I have a page that with two regions. Each region has a report
that uses the same information to generate its report.
Individually running the reports, I can use p_arg_names and
p_arg_values to get what I want. However, when I run the page
that has both portlets, my .show is gone and I cannot get it to
use the p_arg_names, etc. Do you have any idea how to overcome
this? Thanks for any help.

TS1389 how to authorize computer in itunes for the purchased from another account

how to authorize computer in itunes for the purchased from another account ??

Use that account's Apple ID and password; the procedure is otherwise the same as authorizing it for the first account. If the iTunes library contains protected content from more than five iTunes Store accounts, you may not be able to fully sync it.
(92807)

How do I transfer music, videos to my iPhone from another computer that is not the one my iPhone syncs with

How do I transfer music, videos to my iPhone from another computer that is not the one my iPhone syncs with.
Thank You!

Take a look at this -> Recovering your iTunes library from your iPod or iOS device
Short version: iTunes will transfer the purchases made from the iTunes Store on your iPhoneh to your computer. It treats all other music and video syncing as a one-way street, to comply with copyright laws (wont sync stuff not purchased through iTunes from your iPhone to your computer).

How do i log on to my itunes account from another computer

how do i log on to my itunes account from another computer

Press sign in, login.
Go to Store -> authorize this computer. Do what you have to do.
And do not forget when you leave to deauthorize that comp and log out.

How to get standalone Oracle HTTP Server with mod_plsql?

Hi,
I do not know if it is just me but it seems to be a nightmare to get OHS with mod_plsql from the official OTN download site. I downoaded the companion CD for Windows - 3 disks, installed OHS - no mod_plsql. Then I tried to find any clue on OTN on how to download mod_plsql - none. Plenty of information on how to configure it and use it, but nothing on how to get it.
PLSQL gateways is not an option for us because many of our clients do not allow direct communication between the database and the Internet.
Windows 2003 Server R2
Apex 3.2.1
RDBMS 10.2.0.4
Any help appreciated,
WK
PS.
I would not like to download the software from unofficial sites but rather get it straight from Oracle.

Hi,
For those interested: I found Oracle HTTP Server with mod_plsql on OTN -> downloads -> middleware -> WebCenter suite.
WK

How to Create an Oracle BAM Server Connection?

I m following the steps at the end of this post to create the connection but at the end I m getting this message from JDev:
{Unable to write to
/C:/JDeveloper/mywork/Application1/.adf/META-INF/connections.xml
because it is a read-only. Either make it writable or allow it to be made writable through source control.}
it creates the directory C:/JDeveloper/mywork/Application1/.adf/META-INF/ with only a adf-config.xml file but NOT the connections.xml any one knows what is wrong?
Bellow is the stpes I m following. Its exactly what is written at the Oracle Fusion Middleware Developer´s guide for Oracle SOA Suite 11g Release 1(11.1.1) E10224-01
To create an Oracle BAM connection:
1. Select New from the File main menu in Oracle JDeveloper.
The New Gallery dialog opens.
2. Choose Connections from the General category.
3. Select BAM Connection in the Items list, and click OK.
The BAM Connection wizard opens.
4. Provide a name for the connection. Leave the Create Connection In selection as
Application Resources.
5. Click Next.
6. Enter the following connection information about the Oracle BAM instance.
7. Click Next.
8. Test the connection by clicking Test Connection. If the connection was successful,
the following message appears:
Passed.
9. Click Finish.
Note: You can create connections to Oracle BAM in the Oracle
JDeveloper Resource Palette as well as the Application Resources
panel of a specific application. It is recommended that you create these
connections in the Application Resources pane rather than the
Resource Palette.
Field Description
BAM Web Host Enter the name of the host on which the BAM report server and
Web server are installed. In most cases, the BAM Web host and
Oracle BAM Server host are the same.
BAM Server Host Enter the name of the host on which the Oracle BAM Server is
installed.
User Name Enter the Oracle BAM Server user name (typically bamadmin).
Password Enter the password of the user name.
HTTP Port Enter the port number or accept the default value of 8888. This is
the HTTP port for the BAM Web host.
RMI Port Enter the port number or accept the default value of 9085. The
RMI port is for the BAM report cache, which is part of the Oracle
BAM Server.
Use HTTPS Select this check box if you want to use secure HTTP (HTTPS) to
connect to the Oracle BAM Server during design time.
Otherwise, HTTP is used.
Message was edited by:
Mario.Mesquita

Ok that will be nice, but is not the case I dont want to read the tutorial, the problem is I already start to read and execute the tutorial you told me the problem is this tutorial it doesnt show how to do everything from scratch because you already have inside the zip file everything like xmls etc etc, and I want to get my DO and create the process myself, I dont want to get something that it is already done, this tutorial does not show for example how to create this composite.xml, this file it is already inside the zip file, so this way I just follow half of the process and dont learn how to make the whole process.
tks

How to determine the Oracle Application server version in 11i?

Hi Hussein:
I just applied the CPU April 2009 for my database and I am trying to patch the Oracle application Server. I found out the Apache version
Server version: Oracle HTTP Server Powered by Apache/1.3.19 (Unix)
Server built: Aug 7 2003 19:01:25 (iAS 1.0.2.2.2 rollup 4)
But I am not sure how to map the apache Version to Application Server version. With out this information I cant Locate the patch.
I would appreciate your help.
Regards,
Bala

To find Apps Version (11i/R12/12i)
Connect to database as user apps
SQL> select release_name from apps.fnd_product_groups;
Web Server/Apache or Application Server in Apps 11i/R12
Log in as Application user go to IAS_ORACLE_HOME/Apache/Apache/bin/ and run httpd -version

How Publish Reports in Oracle 10g Server Reports and Foms

Hi All,
i am new to Oracle Reports 10g.
i know how to generate reports using report builder.
But i dont know how to publish it in the Oracle App Server 10g Forms And Reports.
Can somebody tell me.........
how to run the app server forms and reports.
how to publish a report in the App Server and make a request to that report.Also tell me where can i get complete info relating to reports 10g
Kindly reply , asap....
regards,
John

Start with the FAQ section:
http://www.oracle.com/technology/products/reports/htdocs/faq/faq_deployment.htm

How to control accessing Oracle Application Server URLs

Hey all;
I wish you are all doing okay.
I am facing a problem with OAS Oracle Application Server; Since we switched form using forms 6i to OAS 10g running on the web browser of course using a URL for each application
The question is if I give a user a single URL for the application he is using and he just change his application name for example hr by payroll he will be able to open the payroll and run reports or even editing values!
How to restrict accessing the apps to only the authorized users on Oracle Application Server 10g?!
Thank you all in advance

Hi Mohamed,
Please follow the below note:Preventing Access to URI's Via IP Address Using Mod_Rewrite (Doc ID 1306292.1)
Regards,
Prakash.

How can we debug Oracle Http Server on AIX.

Our requirement is to attach a debugger (dbx) to oracle http server on AIX.
For that purpose we need to start the OHS webserver service that is opmn in a single process mode the way we start Apache webserver by -X option.
Can anyone help how can we start OHS in single thread.

user9201760 wrote:
Hi,Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and ensure you've updated your profile with a real handle instead of "user9201760".
You'll get a faster, more effective response to your questions by including as much relevant information as possible upfront. This would normally include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
Thanks for having included most of the information that is relevent to your question.
I have installed Oracle Apex 4.1 on Oracle 10g database but I want to configure Oracle HTTP Server on another Server(Microsoft Windows 2008 R2). Here I have placed Apache Tomcat 6.0 version already. Can anyone please tell me how is it possible to install and configure Oracle HTTP Server on Windows 2008 along with Apache Tomcat?Why? Installing OHS and the DB on separate servers will incur additional licensing costs.
More common confugrations would be to use Apache as a reverse proxy to an OHS+DB server, or Tomcat+APEX Listener with a DB server and not using OHS at all. (Although I understand Tomcat is not an Oracle-supported platform for the APEX Listener. For any questions on this or other Listener-related topics use the {forum:id=858} forum.)

How to connect to an Oracle database on one machine from another client machine?

I installed oracle database 11g (server and client) on one machine. It works perfectly. Then I installed oracle client (ODTwithODAC1120320) in another machine. Now I want to connect to the database of the previous machine. I tried to connect but It failed. I think .ORA files should be configured. What should I do to fulfill this.
thanks...

thank you for the quick response..
this link Installing Oracle Database Client for oracle client installation. But the content refers all oracle database installation. could you please get know me that oracle client means only the OdtWithODAC or some thing else? This link Installing Oracle Database Client explain but not the OdtWithODAC. Please let me know clearly.
Please let me know the exact name of the software that I should download from the oracle website that refers the oracle database client.
thanks
Priyashantha hp

9i - How to Determine If Oracle Management Server Has Been Configured ?

hi all,
I'm using 9.2 on a Windows 2000 server - but I'm new to this server and don't know what has been done in the past.
I'm getting the VTK-1000 error when I try to connect in Oracle Management Server mode.
To determine the problem, I need to know how I can determine whether the Oracle Management Server has been created/configured. Also, how can I know that the Repository has been created?
This is what I've tried:
-Tried logging in as sysman with a password of oem_temp
- checked the Windows services - none exist as OracleManage... which causes me to think OMS was never configured
But I dont want to destroy something that may already exist. That's why I want to confirm first.
Sorry for the lame question - I'm new to Oracle.
Thanks, John

Well, then you don't have the SYSMAN password. Here you have two options, the first one, is to try to recover that repository or the second option, to get rid of this repository and create a brand new one.
If you are willing to use the existing repository, then you will have to reset sysman's password, the procedure to perform this task is as follows:
Connect by means of SQLPlus to the repository, you should open a session with the OEM repository database owner. In case you don't have this password (most probably) you will have to temporarily reset this password, as outlined on the bottom procedure.
Open a session to the database as the OEM repoistory owner, let's say OEM_REP or whatever is the actual repository.
sqlplus <OEMRepositoryOwner>/<OEMRepositoryOwnerPassword>@<OEMRepository>
At the SQL prompt issue the command:
execute smp_maintenance.reset_sysman();
Your sysman password will be reset to OEM_TEMP, then you can enter if the repository is up and running, and you can issue commands to check status and shutdown it.
Temporarily resetting a db user password:
1. Connect to the database as sysdba:
sqlplus / as sysdba
2. At the sqlplus prompt query the dba_users table to get the password:
select username, password from dba_users where username='<OEMRepositoryOwner>';
Copy the current password in a safe place.
3. Set a new password, let's say 'X'.
Alter user <OEMRepositoryOwner> identified by X;
4. Once you are done with the previous reset sysman procedure, then you can restore the user password:
alter user <OEMRepositoryOwner> identified by values '<PreviouslyEncodedSavedPassword>';
Then you are done.
~ Madrid
http://hrivera99.blogspot.com/
.

How to reach an Oracle BI Server (client 1) from another client (client 2)

Similar Messages

Maybe you are looking for