How to read an IDOC flat file and send it to XI

Hi,
I'm looking for a way to read a complicated Idoc structured flat file sent to XI by a legacy system and then pushing that data to and R/3 system. Can anyone recommend a good technique?
Thanks,
Steeve

hi steven....
this shud help u...
for FileXIIDoc
File->XI->IDOC (how to start?)
also check this blog for specifying adapter specific identifiers in this scenario
These are steps to follow:
STEPS IN DESIGN
1. Import idoc from the SAP System (SAP02) through imported objects.
2. Create Data Type, Message Type, Message Interface for the Outbound File.
3. Create Message Mapping with file Message and idoc (Matmas04)
5.Create Interface mapping between File Interface and the idoc.
Steps to be followed in Creation of Technical and Business System
Technical System
In SLD, click on technical landscape->New Technical System->WebAS ABAP.
Business System.
1.Goto Business Landscape->New Business System->Name the business system.
2. Choose the technical system that needs to be attached->WebAS ABAP->Technical System Name.
Preconfiguration steps for transfer of data to IDOCS
1.Create a RFC Destination in SM59 of XI Server of type.
2.In transaction IDX1 ,create a port for the client of XI server.
3. The port has to be displayed in the idx2 transaction and we should be able to view the idocs which we imported through integration repository.
Steps in Configuration
1. Goto service without party, right click->Assign a business system.
2. Choose the business system to be added.
3. Create a File Sender Service with communication channel for the same.
4. Create an idoc receiver channel under the business system. Mention the RFC Destination and the port created for the same.
5. Mention the logical Name in the Service->Adapter Specific Parameters of both the File Sender Service as well as the business system.
6. Make the Sender Agreement for theFile Sender with communication channel.
7.Create the Receiver Determination and Interface Determination for the business system.
8.Create the Receiver Agreement for the Business system.
TCODES for File>XI>IDoc
SM59-rfc destination on recving side
IDX1-port on recving side
IDX2-load metadata
Bus. service adapter specific Identifiers-->Logical sys name (check this blog:/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system )
we05-IDoc status records
BD54-Create Partner Number
We20-Create Partner Profile
and also go thru this blog...
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
hope it helps....
regards...
vishal
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system

Similar Messages

How do I record a sound file and send it as an attachment using my 4s?

How do I record a sound file and send it as an attachment using my 4s?

Hi,
The following is the program[Click Here| http://saptechnical .com/Tips/ABAP/email/EmailProgram.txt] which will send any format file. Actual Creator of the program is Amit Bisht.
Thanks & Regards,
Rock.

HOW TO READ DATA FROM A FILE AND INSERT INTO A TABLE USING UTL_FILE

Hi..
I have a file.I want to read the data from file and load it into a table using utl_file.
how can I do it?
Any reply apreciated...

Hi,
This is not your requirment but u can try this :
CREATE OR REPLACE DIRECTORY text_file AS 'D:\TEXT_FILE\';
GRANT READ ON DIRECTORY text_file TO fah;
GRANT WRITE ON DIRECTORY text_file TO fah;
DROP TABLE load_a;
CREATE TABLE load_a
(a1 varchar2(20),
a2 varchar2(200))
ORGANIZATION EXTERNAL
(TYPE ORACLE_LOADER
DEFAULT DIRECTORY text_file
ACCESS PARAMETERS
(FIELDS TERMINATED BY ','
LOCATION ('data.txt')
select * from load_a;
CREATE TABLE A AS select * from load_a;
SELECT * FROM A
Regards
Faheem Latif

How to read local large JPEG files and display into Images Tile

Hi all,
I can read the local multiple files by FLEX/AIR FileListEvent
and loader to read the large JPEG files but cannot display them
into a TileList. Since it is a number of images files, how can I
put them into a thumbnail TileList.
Please kindly advise.
Regards,
Billy

1. So I would like to know which is the {color:#3366ff}best way to load local images in ImageView{color}.I'm no expert, but is there a reason that you are using Swing to do the loading?
2. secondly, currently the system displays all images only after the completion of creating all images. {color:#3366ff}How to display images as and when they are created.{color} So that the user has a feeling that the images are loading.JavaFX Image class let you display a lightweight placeholder, and you can bind the progress to some kind of visual indicator. I don't think you can display an image that is partially loaded.
def PATHS: String[] = [
    "C://Ariel Atom//ariel-atom-1.jpg",
    "C://Ariel Atom//ariel-atom-2.jpg",
    "C://Ariel Atom//ariel-atom-3.jpg",
    "C://Ariel Atom//ariel-atom-5.jpg"
function getImage(path: String): Image {
    Image {
        url: "file:///{path}"
        backgroundLoading: true
Stage {
    title: "Image Tiles"
    width: 1024
    height: 800
    scene: Scene {
        content: [
            Tile {
                columns: 2
                tileWidth: 400
                tileHeight: 400
                content: for (i in [0..3]) {
                    ImageView {
                        image: getImage(PATHS)

How to load Material from Flat File and convert to SAP Format

Hi
I am loading 0Material values from Flat File for mapping purpose. The format of Material in Flat File is "7704132". Within the system, i need to compare the value with 0Material values from the incoming data and update corresponding 0Material in records. for this purpose, I created dummy materials taking 0Material as template and trying to load data. I am getting invalid error- Version '7704132' is not valid RSDMD No194. Can anyone please let me know how to over come this issue. Should I include any routine in the data source or rules level. I am in BI 7.0.
Thanks.

Hi,
Use the FM CONVERSION_EXIT_ALPHA_INPUT to convert the value into Internal format .Use this FM in the Transformations (field mapping).
Search the forum with CONVERSION_EXIT_ALPHA_INPUT for more information on this.
Regards,
Anil Kumar Sharma .P

I just want to read in a csv file and send it to an instrument at 1 Hz per line

I want to read in a csv file that has pwr levels given at 1 Hz and append this using a format into string to the signal generator at 1 Hz. I just have never read in an entire file to automate the procedure. Thanks!

duplicate post
Please give time for people to respond.

How to read email IDs from DB and send mails

Hi,
i m trying to read a set of e-mail IDs from the DB and sending mails to all those email ids.
i am getting "null pointer exception". kindly suggest how can i able to send mails to mails to those users
registered in the db.
I am reading the e-mail from the db like this :
Connection con = DriverManager.getConnection("jdbc:oracle:thin:@10.2.0.100:1521:eprocure", "uid",
"pwd");
I am using oracle9iAS.
Error i m getting :
java.lang.NullPointerException7/16/04 2:25 PM:
     at javax.mail.internet.InternetAddress.parse(InternetAddress.java:534)
     at javax.mail.internet.InternetAddress.<init>(InternetAddress.java:61)
     at com.ep.util.MailUtility.sendMail(MailUtility.java:163)
     at login.SendMsg._jspService(_SendMsg.java:121)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:508)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:255)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:684)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)7/
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
     at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
pls advise.
keep smiling....
Debasis

Based on your stack trace I would say you have a line of code like... = new InternetAddress(something)...and that something is null.
PC²

How to read data from multiple files and append in columns in one file

Hi Guys,
I have a problem in appending data from files in different columns. I have attachement has file A and B which I am reading and not able to get data as in file Result.txt. Please comment on how can I do this
Solved!
Go to Solution.
Attachments:
Write to file.vi ‏13 KB
A.txt.txt ‏1 KB
B.txt.txt ‏1 KB

You cannot append columns to an existing file. Since the data is arrange line-by-line as one long linear string in the file, you can only append rows. A new row needs to be interlaced into the original file, shifting everything else. If you want to append rows, you need to build the entire output structure in memory and then write all at once.
(I also don't think you need to set the file positions, it will be remembered from the last write operation.)
Unless the files are gigantic, here's what I would do:
(Also note that some of your rows have an extra tab at the end. If this is normal, you need a little bit more code to strop out empty columns. I include cleaned up files in the attachment. I also would not call them A.txt.txt etc. A plain A.txt is probably sufficient.)
EDIT: It seems Dennis's solution is similar )
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Write to fileMOD.zip ‏6 KB
MergeColumns.png ‏6 KB

How to Read specific data from file and do a calculation and display on the output

FYI: Below is the function use for the writing:
-OpenFile(use ASCII)
-sprintf
-WriteFile
Example: Output from the doc file
…EndTime: 09:34:48 program time: 0.567663 sec
…EndTime: 09:36:48 program time: 0.666666 sec
My objective is to read data 0.666666 (FYI: is last sentence of the file) to do some calculation. How can we read specific data(specific location) from file..
Any advice or help?
What is the function needed?

I would consider counting line feeds and checking for end-of file to isolate the last line, which then can be read using fscanf...
Have a look at getc...
character = fgetc ( stream );
if ( character == '\n' ) // new line
if ( character == EOF ) // end-of-file

How to get data from pdf file and send contents of the pdf file to R/3

Hi, experts,
Action:
1. Make a pdf forms (interactive form) with inputfield named A_inputfield in the webdynpro application and run the webdynpro application.
2. In the IE, click the save button in the pdf interactive form and save the pdf to local disk,ex: C disk. Close the IE browser.
3. Open the pdf interactive form from the local C disk and type "aaa" to the A_inputfield.
4. I want to save the "aaa" to the R/3 system using webdynpro or using other tools . How can I do it?
First way:
If I use webdynpro application to save the content of the pdf, I don't find a way mapping or binding the content to a context of a view. So I don't think this way is unadvisable.
Second way:
Adding a button "submit" in the pdf forms when create the pdf form. Runing the webdynpro application, save the pdf to local disk,ex: C disk. Opening the pdf interactive form from the local c disk and typing "aaa" to the A_inputfield, click the "submit" button to save the content. Of course, I need to finish the code for clicking "submit" button. But I don't know how to write these codes and where to write these codes. Do you give me some advise ?
Best regards,
tao

Hi, Abhimanyu L,
Thanks a lot for your help. Your answer can give me large developmental.:)
I find http://help.sap.com/saphelp_erp2005/helpdata/en/67/fae9421dd80121e10000000a155106/content through searching google for CL_WD_ADOBE_SERVICES class. But I don't find any exmples for the class. Do you give me some hint for some exmples for the class?
Best regards,
tao
(You can reply back to me via e-mail if you think we should discuss this internally at [email protected] or [email protected])

How to loop through single XML File and send multiple RFC calls?

I am looking for the best approach to use for making multiple RFC calls (can be sequential) using a single XML file of data. I have been attempting to get a BPM loop working, but to no avail. My RFC only accepts a single set of delivery input and I have been told to try to work with it as is.
input xml sample:
<?xml version="1.0" encoding="UTF-8"?>
<ProofOfDelivery>
   <POD>
      <delivery_number>1</delivery_number>
      <carrier_name>UPS</carrier_name>
   </POD>
   <POD>
      <delivery_number>2</delivery_number>
      <carrier_name>UPS</carrier_name>
   </POD>
</ProofOfDelivery>
I need to make a synchronous RFC call for each set of POD data.
Thanks in advance!

Thanks for the inputs.
I tried with a BPM and multi-mapping transformation before a ForEach block. I am getting this error:
Work item 000000028028: Object FLOWITEM method EXECUTE cannot be executed
Error during result processing of work item 000000028029
com/sap/xi/tf/_ProofOfDeliveryMultiMapping_com.sap.aii.utilxi.misc.api.BaseRuntimeExceptionRuntim
Error: Exception CX_MERGE_SPLIT occurred (program: CL_MERGE_SPLIT_SERVICE========CP, include: CL_
Probably because I am not making/using the container objects properly. Here is a screenshot of my BPM. Can anyone spot my issue or point me to an example on this sort of container use?
[http://kdwendel.brinkster.net/images/bpm.jpg|http://kdwendel.brinkster.net/images/bpm.jpg]
Thanks

IDOC Flat File-- XI-- IDOC

Hi,
I have a requirement wherein we have to read the IDOC flat file and post it as IDOC to SAP using XI. I understand we have to use the Flat File Sender adapter and the IDOC Receiver Adapter. On the Sender Side we have to define the Content Conversion to convert the IDOC Flat File to IDOC XML. Writing File Content Conversion for the IDOC Flat File would be very tedious because of the number of fields and fixed structure of the flat file.
I have don through the following guide Section 3.2 where it talks abt converting IDOC to IDOC XML using reportRSEINB00.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20convert%20between%20idoc%20and%20xml%20in%20xi%203.0.pdf
I am not clear how to invoke this report in the Flat File Sender adapter. Also is there any other approach.
Thanks
Rajeev Gupta

Hi Rajeev
You have a flatfile at the sender side so you dnt have any feasiable option to do other than FCC....FCC is not a tediuos one...if you can provide the strucutrre we will help you out...
Check out you have a fixedlength file or piple separated one....
In the functional design how many fields re present and buil the DT,MT MI accoprdingly.....
you have to just use some conecnt conversion parameters that's it...
item.fieldSeparator
item.endSeparator
item.fieldNames
here item is your recordset name
let us know your strucutre
regards
Nisar

IDoc flat file over AS2 adapter to IDoc adapter

Hi,
The scenario is IDoc flat file(.txt) over AS2 adapter to IDoc adapter. Could anyone help on how to convert the IDoc flat file to xml in AS2 adapter to execute the mapping further? we are using PI 7.0.
Thanks in advance!
-zameer

Hi,
Since you are on Pi 7.0, you would not be able to use the modules for this in PI 7.1.
You would need to refer this document for converting from Idoc flat to XML
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a?quicklink=index&overridelayout=true
In your sender AS2 adapter, you can pass the file as is to an abap mapping which will do the conversion to Idoc xml. the output of the abap mapping goes to your message mapping then for conversion.
Another option would be to use a custom adapter module in the sender AS2 adapter to call the Aabap mapping to do the conversion into Idoc xml.
The custom adapter module would do a JCO/RFC call which will do the conversion before passing the data back to the adpter module.
Regards

Getting error while reading the positional flat files

Hi,
I have a requirement to read a Positional Flat file and convert into XML through oracle B2B. I have created a positional flat file .ecs, XSD and parser .ecs file using the blog http://anuj-dwivedi.blogspot.in/2011/10/handling-positionaldelimited-flat-files.html and updated the same in the server.
I have created a agreemnt for inbound scenario But while testing the inbound scenario i am getting an error in B2B as :
Error Code     B2B-50083
Error Description     Machine Info: Description: Document protocol identification error.
Error Level     ERROR_LEVEL_COLLABORATION
Error Severity     ERROR
Error Text     Document protocol identification error.
I have tried all the possible ways but getting the same error.
Please guide me to overcome this.
Thanks,
Nishanth

Nishanth,
Have you followed the step#2 correctly -
Copying the parser ecs in the installation directory and adding an entry in XERegistry.xml (of all machines if domain is spanned across multiple machines)
Also make sure that you have provided Identification Value, Identification Start Position and Identification End Position correctly in Document Defintion. Please remember that start position starts from 1 (instead of 0)
Regards,
Anuj

Reading data from flat file in aplication server

hi all,
can any body provide code how to read data from flat file which is in application server.
thanks in advance

hi,
chk this sample code.
parameters: p_file like rlgrap-filename obligatory
default '/usr/sap/upload.xls'.
types: begin of t_data,
vbeln like vbap-vbeln,
posnr like vbap-posnr,
matnr like vbap-matnr,
werks like vbap-werks,
megne like vbap-zmeng,
end of t_data.
data: it_data type standard table of t_data,
wa_data type t_data.
open dataset p_file for output in text mode encoding default.
if sy-subrc ne 0.
write:/ 'Unable to open file:', p_file.
else.
do.
read dataset p_file into wa_data.
if sy-subrc ne 0.
exit.
else.
append wa_data to it_data.
endif.
enddo.
close dataset p_file.
endif.
Rgds
Anver

How to read an IDOC flat file and send it to XI

Similar Messages

Maybe you are looking for