How to read and save complex data (amplitude and phase) from pna E8361C

Hi, all,
I installed the PNA series driver to my PC. And I got wavefrom from the PNA but always the amplitude. How can I get also phase info from the PNA and save it to my text file?

I did installed the driver for that PNA, I can select the format such as amplitude or phase, but I can only see one of them at one time.
Could it be seen and save simultaneously?

Similar Messages

How do I transfer/save/keep data,documents,notes etc from icloud to my iphone?

Ok, so here's the deal. In my old iphone I was using an apple id (let's call this one X) for icloud, and my notes, "pages" documents etc were being stored there.
However, I recently bought a new iphone and had to stop using this icloud id (long story, no need to analyze) and create another one (let's call this one Y). So I'm still using apple id X for everything else (itunes, app store etc) but for icloud I use apple id Y.
The problem that occurs is that everything that was stored to icloud when I was using apple id X cannot be transferred neither to my device permanently and be kept there (I would be just fine with that) or transferred to my apple id Y (I actually have no idea how to do this. So I kinda bet my money on the first option).
This is what I tried:
I logged into icloud using my X id and the devide started downloading my notes and pages etc. Then I chose to delete the icloud account (in order to log back in afterwards using my Y id). First it warned me that if I deleted the account I would lose all the data from my phone that had been stored in icloud. But the next message was asking me If I wanted to keep the data. A little paradox here. Anyway, of course I chose to keep the data on the phone. However it didn't work. Being at the stage with "no icloud", all I was left with, were the data I had created and stored on my new iphone. Nothing was kept from icloud X. The next step was to log back into icloud using the Y id and the data that were stored there appeared as one would expect. But of course no sign of the data from the "X account".
So, is it possible for me to somehow transfer or save or keep in my iphone, all the data that is stored in icloud under id X, and then start using my apple id Y for icloud without losing nothing at all???
Is icloud a bit of a one-way path or is it just me?
P.S. I often log into both icloud accounts from my pc to check them and everything is still there and is intact, so fortunately I haven't managed to mess up anything (yet).

Thanks for your reply but maybe it would be helpful if you could elaborate a bit on that or maybe I was not clear enough in my question. What I need to do is NOT stop using icloud. But gather everything that is already stored in my old icloud account (X) and save it in my device (iphone, ipad etc) and then continue using icloud but with my new account (Y).
In a scheme:
"->" = "becomes"
Step 1) data from X -> independent device data, and then the X account is removed from the device while the data stays.
Step 2) account Y is added to the device.
Step 2 continued) now the device has a. "the independent device data" that was drawn from the account X and b. the litte piece of data from Y that I have already created.
Step 3) independent device data -> data in account Y (along with everything that is created from now on, and everything that has been stored there. The little piece mentioned above.) Everything should now be merged in Y. Merged in a "good" way. Not overwritten, not deleted etc. Nothing should be lost (old or new, from the device or from X or from Y).
The last step is kind of optional. If the best I can get is having data associated to Y (future and past) AND "independent device data" that is so independent to the point that it cannot be added to my Y account since icloud recognizes and stores only data that is created after the account's addition to the device, then I can deal with that.
I hope I cleared everything out.
I need my notes and pages documents from my old icloud account to become independent device data and just stick to the device. And then, if possible, be uploaded to my new icloud account.

How to modify and save the data in the table control

how to modify and save the data in the table control

hi priya,
kindly go thru the code below.
PROCESS BEFORE OUTPUT.
MODULE status_9010.
LOOP WITH CONTROL tab_control.
    MODULE move_data_to_table.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_cancel AT EXIT-COMMAND.
LOOP WITH CONTROL tab_control.
    MODULE move_data_from_table.
ENDLOOP.
MODULE move_data_to_table OUTPUT.
This is to move the data from the internal table to *the table control
*zmpets_mode-modecode, zmpets_range-rangeid, *zmpets_servfacto-factor are field names of the table *control columns.
READ TABLE int_factor INDEX tab_control-current_line.
IF sy-subrc = 0.
    zmpets_mode-modecode = int_factor-modecode.
    zmpets_range-rangeid = int_factor-rangeid.
    zmpets_servfacto-factor = int_factor-factor.
ENDIF.
ENDMODULE.                 " move_data_to_table OUTPUT
**********************************************8888
MODULE move_data_from_table INPUT.
*To move the data from the table control to internal *table 'INT_FACTOR'.
int_factor-chk = line.
int_factor-modecode = zmpets_mode-modecode.
int_factor-rangeid = zmpets_range-rangeid.
int_factor-factor = zmpets_servfacto-factor.
   MODIFY int_factor INDEX tab_control-current_line.
    IF sy-subrc NE 0.
      APPEND int_factor.
      CLEAR int_factor.
    ENDIF.
ENDMODULE.                 " move_data_from_table INPUT
if this helps , kindly award points.
for any clarification just mail me.
regards,
Anversha.S
[email protected]

How to calculate and save planning data in bex input-ready query using keyfigures for calculation from different infoproviders

Hi Dear All,
We have two real time infocubes and two aggregation levels based on these cubes in one multiprovider
first cube1 is like
char1| char2| keyfig_coefficient(single value for each combination of char1 and char2)
same aggregation level1
(we have input query to fill coefficients by one responsible user)
second cube2 is like
char1| char2| keyfig_quantity| keyfig_result
same aggregation level2
Input ready query should be like (for all other users of different org units)
char1|char2|keyfig_coeff| keyfig_quant(for input) | keyfig_result = keyfig_coeff*keyfig_quant(calculated value, should be saved to cube2)
And we don't have pregenerated lines in cube2, users have to add new lines themselves by wad.
Question is, what is the optimal (easiest) way to make calculation and save result data to cube2 where keyfigures for calculation should be used from different infoproviders. I need just a hint.
Appreciate any help.
Nadya.

I found decision, agregation levels sould be based on multiprovider, not included.

How to read context node/attribute data of diff UI component of same screen

Hi,
I am new to CRM and as well as BSP, Now the requirement is, at the time of Lead creation, when the end user enters customer code and sales area i need to fetch and display the customer group 1 value( VIP,KAM etc) based on the customer's sales area, ( these are sales area specific values).
but the problem is Customer code is in diff UI component and sales area data is in diff UI component .
1) customer code attribute is in UI component BT108H_LEA, View BT108H_LEA\Detail, Context node is BTPARTNERPROSPECT.
2) sales area fields are in the UI component BTORGSET, View BTORGSET\OrgSetData, Context node is BTORGSET.
3) I have created new field(customer type to display the customer group 1 value "VIP") in UI component BT108H_LEA, View BT108H_LEA\Detail, Context node is BTLEADH.
To display the value in the context node BTLEADH, i need to know the sales area data which is entered in BTORGSET.
Kindly let me know how to read the data which is in diff UI component of the same Lead creation screen.
i written following code in context node BTLEADH, atttribute New Zfield, in get method, but not able solve, please guide me.
DATA: LR_ENT TYPE REF TO CL_CRM_BOL_ENTITY,
             LR_COL TYPE REF TO IF_BOL_ENTITY_COL.
LR_ENT ?= ME->TYPED_CONTEXT->BuilHeader->COLLECTION_WRAPPER->GET_CURRENT( ).
LR_COL = LR_ENT->GET_RELATED_ENTITIES( IV_RELATION_NAME = 'BuilSalesArrangementRel' ).
LR_ENT ?= LR_COL->GET_FIRST( ).
IF LR_ENT IS BOUND.
    LR_ENT->GET_PROPERTY_AS_VALUE( EXPORTING IV_ATTR_NAME = 'DIVISION' IMPORTING EV_RESULT = LV_DIVISION ).
ENDIF.
I'll appreciate if you can provide me some documents to refer.
awaiting for your responses.
Thanks
Bhanu

Hi Gangadhar,
I think i have not clearly explained my requirement, let me put it once again. My requirement is, I have to read two UI component data, validate and display some value in one new zfield which is in one of the UI components.
I need to display customer's sales area specific data like customer group 1 value in that new zfield. for that i need Customer code and as well as sales area data from the screen.
1) customer code attribute is in UI component BT108H_LEA, View BT108H_LEA\Detail, Context node is BTPARTNERPROSPECT.
2) sales area fields are in the UI component BTORGSET, View BTORGSET\OrgSetData, Context node is BTORGSET.
3) I have created new field(customer type to display the customer group 1 value "VIP") in UI component BT108H_LEA, View BT108H_LEA\Detail, Context node is BTLEADH.
As per my understanding, in the context node BTLEADH, GET_METHOD of atttribute New Zfield, i have to read customer code from UI component BT108H_LEA, View BT108H_LEA\Detail, Context node is BTPARTNERPROSPECT and Sales area data from UI component BTORGSET, View BTORGSET\OrgSetData, Context node is BTORGSET based on the values, validate and display the data.
But as per your recent reply you are asking me to write the code in get_property_attribute---division. so i didnt understand.
Kindly clarify if i am wrong.
awaiting for your response.
Thanks
BHanu

HT4847 How i can download my backup data? And how to manage the data on i Cloud?

How i can download my backup data? And how to manage the data on i Cloud?

You can't download an iCloud backup, except to restore it to your device should you ever need to.
iCloud data can be managed within the apps on your iPad. Any changes to the data within the apps corresponding to the data you are syncing with iCloud will take place in iCloud. You can also manage some of this data on icloud.com from your computer.
This article explains ways to manage your iCloud storage space, should you need to reduce you iCloud storage: http://support.apple.com/kb/ht4847.

I have my new i phone4, before activating how do i transfer and save details e.g contact list, from old sim to new mini sim?

I have my new iphone 4, before activating how do i transfer and save details e.g contacts list, from old sim to new mini sim?

Iphone does not save anything to SIM.
Your contacts and calendars should be on your computer (Outlook, Address Book,etc).

How can a respondent save an uncompleted form and return to it later?

How can a respondent save an uncompleted form and return to it later?

There is no way to save a web form. Our PDF forms do support this (you can open in Adobe Reader, fill, save, return later, fill and submit)
Randy

How to read a tab seperated data from a text file using utl_file

Hi,
How to read a tab seperated data from a text file using utl_file...
I know if we use UTL_FILE.get_line we can read the whole line...but i need to read the tab separated value separately.....
Thanks in advance...
Naveen

Naveen Nishad wrote:
How to read a tab seperated data from a text file using utl_file...
I know if we use UTL_FILE.get_line we can read the whole line...but i need to read the tab separated value separately.....If it's a text file then UTL_FILE will only allow you to read it a line at a time. It is then up to you to split that string up (search for split string on this forum for methods) into it's individual components.
If the text file contains a standard structure on each line, i.e. it is a fixed delimited structure, then you could use external tables to read the data instead.

I just did something on my mac and now the date, time and battery percentage are in arabic and it says lebanon (arabic) in the language and text preference, how can i change it back to english? ps: i'm hopeless.

i just did something on my mac and now the date, time and battery percentage are in arabic and it says lebanon (arabic) in the language and text preference, how can i change it back to english?
ps: i'm hopeless.

So what you want is for it to say Lebanon (English)? If so, see if this helps:
http://m10lmac.blogspot.com/2012/05/fixing-custom-english-region-settings.html

How do I change/save the default font in mail from helvetica to something else?

How do I change/save the default font in mail from helvetica to something else?

Mail > Preferences > Fonts & Colors > Messages font:
Click the "Select" button next to "Helvetica 13" textbox.
Select your choice from the window that opens up.

How to insert row in table control and save the data in tables

Hi,
I have one table control i am displaying data into table control ,
my problem is : i want to display data into read mode in table control.
but when i click on insert button on the same screen i want one blank line should inserted into table control , then i want to insert some data into table control on that row , when i click the save button . the new data inserted into the table control is insert that data into ztable ,
please give me solution
main problen is how can know inserted line in table control and pass that data into ztable.

Hi,
Follow the below logic,
PROCESS BEFORE OUTPUT.
MODULE STATUS_0001.
MODULE POPULATE_TABLE_CONTROL. --> Get the data from table store in
                                                                      ITAB
LOOP AT GT_CTRL_LP_D516 INTO GS_WA_CTRL_LP_D516
       WITH CONTROL CTRL_LP_D516
       CURSOR CTRL_LP_D516-CURRENT_LINE.
The following module moves data to control
    MODULE MOVE_TO_CONTROL.--> Move data from ITAB to table control
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT GT_CTRL_LP_D516.
ENDLOOP.
MODULE EXIT AT EXIT-COMMAND.
MODULE USER_COMMAND_0001. --> Here you have to take out the values from table control and update database table
Reward points if helpful.
Thanks and regards,
Mallareddy Rayapureddy,
Munich, Germany.

I can not boot my MacBook Pro. How do I get and save the data that is not backed up??

I can not boot my MacBook Pro running on Lion 10.7.4. I pressed control, comment P and R keys and O got to the disk utility, then I tried to repair disk and it can not be repaired. I get a message that tells me to back up as much data as possible ?. But if I can not open the computer how can I save my data??
I have a back up until 2 weeks ago on time machine. but the work of the last 2 weeks is extremely important how can I get it??
If I use m time machine backup do I loose the additional data of the last two weeks!,
Please help.. It's a huge amount of work that I have done and can not loose it

If it were me, I'd get a new hard drive or SSD and put it in an external enclosure. Boot into the recovery partition, format the new drive (not the old one) and install the OS to it. Shut down the Mac, open it up, and swap the drives. You may be able to read your data from the old one externally if you're lucky. If you're very lucky you may be able to use Migration Assistant to move all your stuff to the new drive.
Look at ifixit.com for the exact procedure to get to the drive on your model. If it's a unibody it's pretty simple.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1392154588&sr=8-3&keywords=2.5+enclosure

How do I save IRS pdf forms so that I can fill in and save the data

when I downlaod a US government IRS form I am unable to fill in the form, save the data and print, I have tried saving as a pdf from the print menu and using the tools menu none of which works

I know there is an app called PDFPen that is supposed to fill in PDF forms. PDFPen is available in the App Store, but it is not free.
I have no financial interest in PDFPen. I also don't know if there is some cheaper way to fill in the forms.

Busted mac - how to retrive and save my data?

Hi Hope someone can help -
My Mac has gone belly up recently. It starts up in the grey screen with an apple logo and a spinning disc before moving onto a blue screen (with occasional spinning wheel). I can move the mouse cursor in the blue screen.
Note - There is only 7gb of free space left on the hard drive.
I’ve tried many different options to get back into the mac including –
1. Trying to boot into safe mode – fails to do so.
2. Tried holding down the S key while booting up – no joy here either.
3. Holding down cmd-S to get into the UNIX command line – this was successful and I can see all my files and directories.
4. Cmd-C and running from the original OS-X install disc. From here I was able to run the disc utility but it reported no problems with the hard disc. I can also see the various files and directories from here. But I cannot see any way to copy/save my data using this option.
It’s been reported elsewhere that the above problem might be caused by the logic board failing, so re-installing the OS may be pointless, correct? And anyway a full re-install will wipe all my data. So at this point it looks like saving my mac might be a wasted effort, so my main emphasis is now on retrieving my data.
Perhaps someone might be able to help with the following (I’m fairly comfortable with using UNIX, but not an expert).
1. Could I copy the necessary files onto an external hard disc using Unix CP command if I simply attached another external hard disc to the mac?
2. Or could I simply cp my files to an external DVD re-writer drive from the UNIX command line? If so what would be the command to do so?
3. Any other options/suggestions?

Hi, I hope we can help as well.
Okay so your first concern is your data. Go and purchase an external hard drive that is at least twice as big as you think you will need. We'll use it to 1) Create a boot disk and 2) Put any data you can save in a safe place. After we are done, you'll use this external hard drive for backing up your data on a regular basis, so you won't need to worry about this nearly as much again. If you really want to be safe, get two external drives and back up your backup.
Boot the iMac from its install DVD. Use *Disk Utility* to format the external drive. Install the OS on it. Restart, booting from the system on the external drive. Copy your data from the internal hard drive to the external. You can use the *Migration Assistant* (in /Applications/Utilities) the UNIX cp command, a program called Carbon Copy Cloner, or any of several other methods. At this point you can also use the Finder to make a copy of critical files to DVD(s).
Once you have your data safe, shut down the iMac and disconnect the external hard drive. Reboot starting from the install disk again. Use the installer to do an *Archive and Install* of the operating system, preserving user and network settings. See [this article|http://support.apple.com/kb/HT1710] for further information about A and I.
If the Archive and Install works, you should be able to restart the computer and have it be working again. Reconnect your external hard drive and use it with [Time Machine|http://www.apple.com/support/leopard/timemachine> to maintain current backups for the future.
If all of the above fail, let us know, we'll keep working with you.
Best of luck.

How to read and save complex data (amplitude and phase) from pna E8361C

Similar Messages

Maybe you are looking for