How to read and store the data from an email ?

If there is any sample code available then it will be very helpfull
Thanks

You're not trying very hard.
It's at the top of this forum:
[http://forums.sun.com/forum.jspa?forumID=43&start=0|http://forums.sun.com/forum.jspa?forumID=43&start=0]
It's in the documentation included with the JavaMail download.
Oh, and have you heard of this thing called "google"?
Try searching for "JavaMail FAQ".

Similar Messages

How to read and store the documents from other system to own system.

Hi Experts,
i need to read the document from other system (Say from other connected R/3 system) and then i need to save it in my system.
Please suggest how would i proceed?
Any helpful suggestion will be rewarded with points.
thanks
Snehasish

Hi Abaper
I think I havent explained my problem well. Here I am explaining it again..
I want to pull an *.excel/ *.csv file through ABAP code.The target file that I want to access in my ABAP code is stored into another PC in the same Local area network under some directory say 'c:\temp\credit.csv'.
I have the logon information of the target file's PC.
Please help me with code if anyone of you having.
Thanks in advance.
Rgds,
Snehasish
Edited by: Snehasish Das on Apr 29, 2008 2:18 PM
Edited by: Snehasish Das on Apr 29, 2008 2:33 PM

How to read and write a data from extrenal file

Hi..
How to read and write a data from extrenal file using Pl/sql?
Is it possible from Dyanamic Sql or any other way?
Reagards
Raju

utl_file
Re: How to Create text(dat) file.
Message was edited by:
jeneesh

HOw to connect and extract the data from MS ACCESS SOURCE(Database) system

Hi experts ,
I have to extract the data from MS access database system using JDBC adapter will it work if Yes HOW?

Hi Sushma,
how to configure sendor JDBC adapter ..
Select adapter type is JDBC..
Give the Transport Protocol:.JDBC 2.0 (Example)............
Message Protocol:...JDBC...........
IAdapter Engine : Integration Server
Processing Parameters..
Quality of service.....(Example)..Exactly once
Poll Interval .... Example ..10
Query Sql statement..Example ..select * from XXXXX
Document Name.....
Update Sql stetement.....
Thanks,
Satya
Reward points if it id useful...

How to read and write the data like this(is JSON?)?

i have some data like below(is json?),how to write them into
the database?
i user coldfusion 7.
{"title":"ColdFusion？","url":"
http://www.adobe.com/cfusion/"},
{"title":"flex blogs","url":"
http://www.flexblogs.com/"},
{"title":"studio","url":"
http://www.sans.com.com/"}
Thank you very much!

You need to parse it and then insert the records into your
database.
Take a look at
CFJSON it is a JSON
serialiser and de-serialiser.
Once you have converted it to native CF datatypes you can
loop through it and insert it into your database.

How to read and print the data that is in the BB Desktop Software backup file

I recently backed up my BB Tour 9630 to the BB Desktop Software. I would like to know if there is a way to open this file on my desktop so I can see the data. Also, I would like to know if there is a way I can print ( hard copy ) this data from that file. Right now, I see no way to open the file. Thanks, Jeff

Hi,
Check the below wiki link if it helps.
http://wiki.sdn.sap.com/wiki/display/CRM/Howtodisplayaz-tableinanassignmentblock
Also, you can try an option of transaction launcher.
Hope this helps.
Regards,
Chandrakant

How to read and update the value of property file

Hi,
I am not able read the values from property file.
Please tell me how to read and update the values from property file using Properties class
This is my property file : - Config.properties its located in D:\newfolder
Values
SMTP = localhost
Now i need to change the value of the SMTP
New value :
SMTP =10.60.1.9
Pls Help me
Thanks
Merlin Rosina,

Post a small (<1 page) example program that forum members can copy and run that demonstrates your problem.

How can i store the data from the list to MS-Access?

Hi all,
We all know that from alv it is possible to export data to Ms-excel or word or text file. Can anyone tell me how can i store the data from alv or reports to Ms-Access?
Thanks in Advance,
Abhijit

Hi,
If you want that without code, i suppose there is a option in MS-Access to import data from Excel, so you have to first export to excel and then import to Access.
If you want to code it yourself then have a look at FM TABLE_EXPORT_TO_MSACCESS, as said in Exporting Data from R/3 to MS ACCESS
You can also see the search results in SCN for [export data to MS-Access (45 Results)|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=exportdatato+MS-Access&cat=sdn_all].
Regards
Karthik D

How to read and display a signal from my PIC Microcontroller onto Labview

Hi,
I am doing a project on a Pulse Oximeter and i am trying to read and display the signal from my PIC Microcontroller on Labview? How do i go about doing it? I am using the PIC16F877 and also making use of the USART?
How do i implement and initialise the USART in PIC16? What are the steps to be taken, please guide me through the process? The link provides information regarding the USART connection, initialisting and stuff? Is it correct to use these codes in my program?Link: http://ww1.microchip.com/downloads/en/AppNotes/00774a.pdf
Also, i am using the RS232 serial interface to connect to the PC? The connector i am using is the DB9 Connector. Which template and VI can i use? Am i supposed to use the NI-DAQmx and VISA? Also, for my USART connection, i am using the MAX232 Driver which is applicable for my application as i am working with +5V. So far, i have been reading and trying out on Labview and the steps i have taken are:
1) Open a New VI and used the Instrument I/O(Read & Display) template?
2) How do i configure the Instrument I/O Assistant Express VI to read the info from my device connected to COM1?
3) I was reading the Labview Manual, 'Getting Started with Labview' and i was following the steps under Page 55, Communicating with an Instrument. Am i on the right track?
4) How do i check and make sure that the port settings of the I/O Assistant and my PIC Micro Match
Please help me out and guide me through the process. I am student at a polytechnic and i am very new to Labview and the software is used as a development tool for the project. I have a deadline to meet and i hope i can get a response as fast as possible. Your help will be kindly and greatly appreciated. I hope to hear from you guys soon.You can e-mail me all your answers at [email protected]
Thank You
Best regards,
Ashwin
Ashwin Kumar Mansukhani
Attachments:
Getting Started with Labview.pdf ‏901 KB

Hi Ashwin,
I am not familiar with the PIC Microcontrollers, but I am assuming you mean that you have the microcontroller sending out serial data that you want to read on another computer with LabVIEW. Please let me know if this is incorrect.
What type of data is coming out of the serial port? Is it ASCII, or binary? The reason I ask this is that the serial communication in LabVIEW is done through a protocol called VISA, which uses ASCII data to send and receive. You can later convert this data into whatever form you need, but this is what it is designed to read and write.
You can check the settings such as baud rate and data bits in a configuration utility called Measurement and Automation Explorer, or MAX. When you open up the MAX interface, you can expand the Devices and Interfaces entry on the left, and then expand the Ports entry to see your serial port. When you highlight this port, select the Port Settings tab at the bottom of the window, and you can see what the current settings are, and change them if you need to. You can also set these parameters in LabVIEW using the VISA Configure Serial Port VI.
You can also test communication in MAX by right clicking on the correct port and choosing Open VISA Session. Then choose the Basic I/O light blue tab, and then go to the Read tab. When you click execute, it should read in what is coming from the serial port. This will allow you to verify that the correct information is coming in before even trying to acquire the data in the LabVIEW environment.
In LabVIEW, the best resource to use the Basic Serial Write and Read example program that ships with LabVIEW. By examining the block diagram of this program, you will be able to see the basic programming flow of serial communication in LabVIEW.
I hope this information was helpful! Please let us know if there's anything else we can help with.
john
Applications Engineer

How to modify and save the data in the table control

how to modify and save the data in the table control

hi priya,
kindly go thru the code below.
PROCESS BEFORE OUTPUT.
MODULE status_9010.
LOOP WITH CONTROL tab_control.
    MODULE move_data_to_table.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_cancel AT EXIT-COMMAND.
LOOP WITH CONTROL tab_control.
    MODULE move_data_from_table.
ENDLOOP.
MODULE move_data_to_table OUTPUT.
This is to move the data from the internal table to *the table control
*zmpets_mode-modecode, zmpets_range-rangeid, *zmpets_servfacto-factor are field names of the table *control columns.
READ TABLE int_factor INDEX tab_control-current_line.
IF sy-subrc = 0.
    zmpets_mode-modecode = int_factor-modecode.
    zmpets_range-rangeid = int_factor-rangeid.
    zmpets_servfacto-factor = int_factor-factor.
ENDIF.
ENDMODULE.                 " move_data_to_table OUTPUT
**********************************************8888
MODULE move_data_from_table INPUT.
*To move the data from the table control to internal *table 'INT_FACTOR'.
int_factor-chk = line.
int_factor-modecode = zmpets_mode-modecode.
int_factor-rangeid = zmpets_range-rangeid.
int_factor-factor = zmpets_servfacto-factor.
   MODIFY int_factor INDEX tab_control-current_line.
    IF sy-subrc NE 0.
      APPEND int_factor.
      CLEAR int_factor.
    ENDIF.
ENDMODULE.                 " move_data_from_table INPUT
if this helps , kindly award points.
for any clarification just mail me.
regards,
Anversha.S
[email protected]

How to read and display a signal from my PIC Microcontroller onto Labview?

Hi,
I am doing a project on a Pulse Oximeter and i am trying to read and display the signal from my PIC Microcontroller on Labview? How do i go about doing it? I am using the PIC16F877 and also making use of the USART?
How do i implement and initialise the USART in PIC16? What are the steps to be taken, please guide me through the process? The link provides information regarding the USART connection, initialisting and stuff? Is it correct to use these codes in my program?Link: http://ww1.microchip.com/downloads/en/AppNotes/00774a.pdf
Also, i am using the RS232 serial interface to connect to the PC? The connector i am using is the DB9 Connector. Which template and VI can i use? Am i supposed to use the NI-DAQmx and VISA? Also, for my USART connection, i am using the MAX232 Driver which is applicable for my application as i am working with +5V. So far, i have been reading and trying out on Labview and the steps i have taken are:
1) Open a New VI and used the Instrument I/O(Read & Display) template?
2) How do i configure the Instrument I/O Assistant Express VI to read the info from my device connected to COM1?
3) I was reading the Labview Manual, 'Getting Started with Labview' and i was following the steps under Page 55, Communicating with an Instrument. Am i on the right track?
4) How do i check and make sure that the port settings of the I/O Assistant and my PIC Micro Match
Please help me out and guide me through the process. I am student at a polytechnic and i am very new to Labview and the software is used as a development tool for the project. I have a deadline to meet and i hope i can get a response as fast as possible. Your help will be kindly and greatly appreciated. I hope to hear from you guys soon.You can e-mail me all your answers at [email protected]
Thank You
Best regards,
Ashwin
Ashwin Kumar Mansukhani
Attachments:
Getting Started with Labview.pdf ‏901 KB

Hi Ashwin,
It is a good idea to first be able to communicate with the microcontroller using some sort of serial communication software such as "HyperTerminal" or "Procomm", etc. Refer to MicroChip's recommendations on this.
Once that works, then you are ready to use LabView.
Here is a link which covers many aspects of serial communication. Link - click here
You probably received a development kit. They usually have a readily available interface. It's been a long time since I played with the PIC, but I seem to remember that you need to program the serial communication driver (as well as at least a bootloader) to get the serial communication going. The driver contains the necessary protocols so that you PC can have a machine conversation with the target (PIC).
It sounds like a fun & interesting project. Please avoid to have replies to your personal email. By having the answers posted to this thread, you will get much more support and advice.
Have fun,
JLV

How to read a tab seperated data from a text file using utl_file

Hi,
How to read a tab seperated data from a text file using utl_file...
I know if we use UTL_FILE.get_line we can read the whole line...but i need to read the tab separated value separately.....
Thanks in advance...
Naveen

Naveen Nishad wrote:
How to read a tab seperated data from a text file using utl_file...
I know if we use UTL_FILE.get_line we can read the whole line...but i need to read the tab separated value separately.....If it's a text file then UTL_FILE will only allow you to read it a line at a time. It is then up to you to split that string up (search for split string on this forum for methods) into it's individual components.
If the text file contains a standard structure on each line, i.e. it is a fixed delimited structure, then you could use external tables to read the data instead.

How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF. But if I do a copy and p

How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF. But if I do a copy and paste, and then take a print of the document, all the graphs and text is printed upside down, flipped back.

Use the Pencil Tool
alex
adrian stock wrote:
> How to copy and paste a single pixel
>
> I want to copy a single pixel and then paste it in the
position of
> another pixel in the same image.
>
> (This is in effect changing the colour of the target
pixel, isn't it.
> But in my case copying an existing pixel seems simpler
than selecting a
> colour from the swatch or using the colour picker.)
>
> What is the most efficient way of doing this?
>
> I tried to select one pixel with the marquee tool. Then
copied it with
> control-C, but then how do I select the target pixel and
paste with
> control-V?
>
> Thanks for your help.
>
> Adrian
>

How to Read and Write .XML datas (HELP Plz...)

hai everybody
how to read and write xml datas... plz give clean and simple example..
bcoz me want to produce such type of module...
if any one help me .. thats the only way me laid in software ladder
plz....
thank u in advance

thank u for giving idiot..
but before posting i search in google also..
but i cant get what me expect..
thus i posted...
then who is ................?
sorry javacoder01
// plz help me
Message was edited by:
drvijayy2k2

Read and List the Files from Remote Webserver Path

Hi All,
I have requirement where i need to Read and List the files from a Folder of Remote webserver path using JAVA.
Remote webserver is within the network only...No Firewall and also Access is given to Read the folder. No Issues on this.
Folder will just contain some PDF files...
I just need to display the PDF file names available in the Folder..
No need to read the PDF File...Only required to read the folder to list the file names in it.
Looking forward some workaround to this.
Thanks and Regards.

I need to read the folder from a webserver path of different machine...
File dir = new File( prop.getProperty("inputPath"));
File[] files = dir.listFiles(fileFilter);
final String match=siteName;
     final String type=reportType;
     Calendar c1 = Calendar.getInstance();
     c1.add(Calendar.MONTH, - Integer.parseInt(prop.getProperty("filterMonths"))); //Filters reportes generated in last X months (X picked from config file)
     final long filterDate = c1.getTime().getTime();
     FileFilter fileFilter = new FileFilter() {
     public boolean accept(File file) {
     long fileLastModiDate = file.lastModified();
     if((fileLastModiDate >= filterDate) && (file.getName().toLowerCase().startsWith(match)) && ( (type.equals("M") && file.getName().indexOf("WIP")==-1) || ((!type.equals("M") && file.getName().indexOf("WIP")!=-1)) ) ) {
          return true;
     }else {
          return false;
Here it works fine if the input path is local machine..
But i need to know how to give the input path as WEBSERVER PATH of different machine??

How to read and store the data from an email ?

Similar Messages

Maybe you are looking for