How to read from a ResultSet right after insertRow() ?

Suppose I have table TABLE with a numeric ID primary key that is filled in automatically by the db (i.e., using a combination of a sequence and on-insert trigger). My problem is that after the insert I have to make another query just to get the value of the ID column (which I need for further processing). This is awkward, so tried the following:
ResultSet rs = stmt.executeQuery("SELECT ID, NAME FROM TABLE WHERE 1 = 2");
for (int i = 0; i <5; i++) {
    rs.moveToInsertRow();
    rs.updateString(2, "test"+i);
    rs.insertRow();
    System.out.println("id = " + rs.getInt(1)); }but this always prints 0, i.e., the result set does not pick up the new ID.

lava wrote:
I wish to read from a text file in a for loop and that on every iteration i read one charachter and proceed to the next one.
can anyone help me?
Some additional comments:
You really don't want to read any file one character at a time, because it is highly inefficient. More typically, you read the entire file into memory with one operation (or at least a large chunk, if the file is gigantic) and then do the rest of the operations in memory.  One easy way to analyze it one byte at a time would be to use "string to byte array" and then autoindex into a FOR loop, for example.
Of course you could also read the file directly as a U8 array instead of a string.
Message Edited by altenbach on 06-10-2008 08:57 AM
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • Hi, my Ipod Schuffle (4 gen) dissapears from windows vista right after I execute Itunes, I've change the drive letter, erase temps in App data file, verified USB drivers, etc... Can someone guide on how to solve this?

    Hi, my Ipod Schuffle (4 gen) dissapears from windows vista right after I execute Itunes, I've change the drive letter, erase temps in App data file, verified USB drivers, etc... Can someone guide on how to solve this?

    If you want the shuffle to be always visible in Windows (outside of iTunes), you need to Enable disk use.
    Select the shuffle in the iTunes sidebar, under DEVICES.  Over to the right, select the Summary tab.  You should see a checkbox that says Enable disk use.  Check it and click Apply.
    NOTE:  If disk use is enabled, you have to Eject the shuffle in iTunes, BEFORE you physically disconnect it.  If disk use is NOT enabled, you can disconnect the shuffle at any time, as long as iTunes is not doing something with it at that moment (such as syncing); the shuffle's light will then be blinking (to indicate DO NOT DISCONNECT).
    So, unless you want to use the shuffle like a USB flash drive (carry random files on it), you may want to NOT Enable disk use.

  • How can i run a executable right after a rman job has run?

    How can i run a executable right after a rman job has run?
    I have a rman job that execute every night. The backup is local.
    I want to have a duplicate of the backup on another machine.
    I want the executable to sync the directory to execute right after the rman backup.
    How can i do this using the job scheduler?
    Normaly, i would configure rman to run the backup on both location. But im having trouble with rman regarding this:ORA-600 [2103] on RMAN Backup to NFS mounted file system

    Hi,
    If the rman job is in fact a Scheduler jobs (appears in the dba_scheduler_jobs view) then you can create a second event-based job that runs after the rman job (and set the raise_events attribute for the rman job).
    Instructions are here
    Create Event based job
    Hope this helps,
    Ravi.

  • How to read from text file?

    I would like to read data (frequencies) already written in a text file. I will need read these frequencies one at a time to set the function generator (as part of my data acquisition application), acquire data that is in turn written to a file and then go back and read the next frequency from the file to repeat the process again. I also have another idea of doing the same, which is read all the frequencies from the text file and populate a table and a frequency value is picked from the table each time to go through the process mentioned above.
    Can anyone suggest the following: (1) How to read from a text file, (2) What could be the most efficient way of solving my above problem.
    I am a new LabVIEW user and any help will be appreciated.

    Hi Research,
    Depending on the format of the data file, there are a few options for reading it.  If it is tab delimited, you may want to use the Read from SpreadSheet File VI which will read the file into an Array.  You can then use the Index Array VI to pull out individual entries.  If the files is ASCII but not tab delimited, you could use the regular Open File and Read File VIs.  You can either read the file out piece by piece, or read the entire file into a string and then use the Match Pattern VI to parse out the different elements (there are actually many ways to do this - check out the Strings subpalette). 
    Since you're new to LabVIEW, you may want to check out these resources:
    Three Hour Introduction to LabVIEW
    Six Hour Introduction to LabVIEW
    Getting Started with LabVIEW
    I hope this helps!  Let us know if you have more questions,
    Megan B.
    National Instruments

  • How to read from properties file

    Hi,
    I am using JSR 168.
    while creating a new portlet, a folder gets created with the name as "portlet". Under which is resource package and <PortletName>Bundle.java.
    pls tell me how to read from .properties file.
    waiting eagerly for some reply
    Thanks & Regards,
    HP
    Edited by: user9003827 on Apr 13, 2010 3:42 AM

    I think i have mixed it up :)
    I have looked at it again and believe you are using regular JSP portlets.
    Can you tell what you want to achieve by reading .properties file. Are you meaning the preferences of the portlet or what exactly are you trying to do?
    Reading propertie files is easy:
    // Read properties file.
    Properties properties = new Properties();
    try {
        properties.load(new FileInputStream("filename.properties"));
        String myKey = properties.getProperty("yourKey");
    } catch (IOException e) {
    }Edited by: Yannick.O on 13-Apr-2010 05:52

  • How to Read from Standard Input?

    Hi,
    I am new to Java. Been reading the tutorial, but still unable to find How to read from standard Input.
    Can anyone help? Thanks.
    Here is my simple & error code:
    public class test
    public static void main(String[] args)
    char filename[];
    int i=0;
    System.out.print("Type in a filename to read: ");
    while ( System.in(filename) != -1 )
    i++;
    System.out.print(filename);
    RP

    import java.io.*;
    public class forum{
         public static void main(String args[]) throws IOException
    InputStreamReader is = new InputStreamReader(System.in);
    BufferedReader br = new BufferedReader(is);
    String input = "";
    do
    try
    System.out.println("Enter command: ");
    input = br.readLine();
    catch ( IOException io ) {}
    } while (!input.equals("exit"));
    [code\]
    package to import is java.io.*;                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • How to read from UDP ??

    Hello,
       I have a device which sends MPEG2 multicast udp live stream, I can read it from udp://@236.1.1.14:34000 for instance. Next it is transcoded with vlc :
    cvlc -vvv udp://@236.1.1.14:34000 --sout \
            "#transcode{venc=x264{keyint=60,profile=baseline,level=3.0,nocabac},vcodec=x264,vb=250,sc ale=0.6,acodec=mp4a,ab=96,channels=2,samplerate=48000}:rtp{dst=127.0.0.1,port=10013,mux=ts }" 2>1 > /dev/null &
    My question is how to read from udp://@127.0.0.1:10013 using FMS and send it to flash clients ?
    Thank you

    Hi Nikhil,
        Thank you for the response. But what kind of streams can I feed into FMS input ? VLC supports other types of output, HTTP for example

  • How to read from file just the 2nd line onwards?

    hi guys can anyone help me?
    how to read from the file if the file was like this
    2 2
    2 1
    1 3
    and i want to get the 2 1 ,just the 2nd line and the 3rd line?
    i tried using the string tokenizer but it kept saying
    no such element
    i tried this code:
    StringTokenizer cols = new StringTokenizer(s," ");
         temp =  (String) (cols.nextElement());
         num_rows = Integer.parseInt(temp);
         temp = (String) (cols.nextElement());
         num_cols = Integer.parseInt(temp);
         matrix = new int [num_rows][num_cols];
         // to add all the values in the data file into an array                         
         while ( s!= null ) {
         StringTokenizer st1 = new StringTokenizer (s);
               while (st1.hasMoreTokens()){
                     for (i=0; i<num_rows; i++){
                          for (j=0; j<num_cols; j++)
                             matrix[i][j] = Integer.parseInt
                                ( st1.nextToken());
                } // whilecan anyone please help me?
    thanks

    This will read the file witout the first line:
    import java.io.*;
    import java.util.*;
    public class Read2
    public static void main (String[] args)
         try
              FileReader     file = new FileReader("f.txt");
              BufferedReader buff = new BufferedReader(file);
              String         line  = buff.readLine();
              while (line != null)
                   line = buff.readLine();
                   System.out.println(line);
              buff.close();
         catch(IOException e)
              System.out.println("IO Error");
    }       Noah

  • How to read from 4 serial ports

    Hi
    Does anyone know how to read from 4 COM ports with only 2 interupts? I can
    manage it by using Close serial driver.vi, however this makes the amount of
    allocated memory by Labview increase throughout my experiment and thereby
    slows down the computer. I use Labview 4.0.1 on Win95.
    Regards
    Frede Lei

    Hi,
    Thanks for the reply however I could able to write the PCR to read one variable without wagetype. My question is, I have 6 variables in VAR table and now I want to read all the variable and based on the variable I need to create the 6 wagetype each for each variable.
    I know to create the wagetype with one variable.
    ZSSB CCE : restore 7SSB wage types paid separately in RT       
            AMT=& VSSB Set                                         
            AMT?0      Comparison                                  
                ADDWTI7SSB IT   Input table                        
              =                                                    
    However, how I could create the only 1 PCR for 6 variable?
    regards,
    Saurabh Garg

  • How to read from txt file that has words in between?

    Hi all,
    I am using Labview 8.2.
    I would like to read from a text file.  I have data (after each time it is has averaged over 100 waveforms) repeatedly stored on to the file.  The idea is to further improve SNR in post processing by again averaging the data (that has been averaged over the 100 waveforms).  
    I can get LabView  to save the data repeatedly into the file, so it keeps getting appended.
    The problem is to read the data in labview so I can now again average it.  The problem is the labview seperates the sets of data with the following:
    " Channels    1    
    Samples    9925    
    Date    2008/10/28    
    Time    17:16:11.638363    
    X_Dimension    Time    
    X0    -3.0125000000000013E-3    
    Delta_X    2.500000E-6    
    ***End_of_Header***        "
    So When I read it, it only sees the first set of data.
    Can someone please tell me how to read all the sets of data in labview?
    I have attached the file I want to read "acquiredwaveform.txt"  and the basic VI (really basic btw) to read the file.
    Thanks
    Solved!
    Go to Solution.
    Attachments:
    ReadFileAndAverage.vi ‏48 KB
    acquiredWaveform.txt ‏605 KB

    Thanks again DFGray for the comments. 
    After the correlations to find the peak positions, i just take the max value.  And you are right the accuracy is limited by the number of  samples per cycle.  Perhaps it would be clearer if you see the code.
    1) Basically I get a signal on the up and downslope of the sine wave.  On the down slope however the signal is negative, i.e. its is flipped.  So before I shift and average...I 'cut' the waveform into 4 (when cycles per buffer = 2, then I get 4 signals, 2 on the up slope and 2 on down slope) bits.  Counting from one, I flip the even number, cut it, and but an array of waveforms which is then sent to be convolved and shifted.
    2) Array of waveforms are stored to be phased shifted (Convolve and shift vi) and averaged (entire averaging vi which uses the convolve and shift vi as a sub vi). 
    * Phase shifting doesn't work when I cut and put it together (So something is wrong in cut waveform vi) 
    * Also if it isn't too time consuming could you give me an example of interpolating and shifting thing.
    * Also if you have any comments regarding the following VIs please let me know.  
    Thanks 
    Attached is:
    1) Cut waveform vi
    2) Convolve and shift
    3) Entire averaging 
    Attachments:
    SubVICutWaveforms.vi ‏37 KB
    SubVIConvolveShift.vi ‏30 KB
    SubVIEntireAveraging2.vi ‏43 KB

  • How to read from DAQ in different time intervals

    Hello,
    I am currently using LabVIEW 2010. I am new to LabView.
    I have 9 thermocouples I want to record the temperature from and create a graph.
    For one graph I want to graph the data every second for the duration of about 1.25 hours. For the other I want to record and graph the data every 2 minutes for a duration of 30 minutes. The temperature then would be ramped up in an oven and set to a higher temperature. When it is stabilized, recording of the data again will begin again at intervals of 2 minutes for the duration of 30 minutes.
    The first is only to see the real time temperature variation while the program is recording and running. The second graph and data is what I will use to analyze.
    What I need help in is finding out how you can read from the DAQmx at two different time intervals. I tried two parallel loops with each one graphing the two separate graphs I need with a delay time. Those two parallel loops where then surrounded by another while loop. The result is that the outside loop waits until both loops are finished so I do not get the correct results for the real time data graph.
    Is there a way to call on the DAQ data you need at the time interval you desire? Any suggestions to solve this problem? Thank you for your time and help.

    You are on the right track.  Sample the data at the fastest rate and send it to the 1st graph.  For the slower graph, take a sample from the faster data at your desired time interval.  You could use a timer and a case structure for something quick and easy and still have everything run in the same loop.  You could use two loops running at different speeds, it is just a little more involved and a few other things to consider. 

  • How to make videos automatically play right after each other?

    I have four videos that I need to automatically play right after each other. For instance video1 plays and is done so video 2 should automatically start to play and then when video 2 is done video 3 should start and when video 3 is done video 4 should start and when video 4 is done video 1 should start. How do you code for this? Also, when a button is clicked whatever video is playing needs to stop and then the item that the button is linked to should show up whether it is another video or a graphic with scrolling text.

    How do you use a complete listener? Can you give me an example of code to use or give me a link that has step-by-step instructions? I really would appreciate it.

  • How to read from and write into the same file from multiple threads?

    I need to read from and write into a same file multiple threads.
    How can we do that without any data contamination.
    Can u please provide coding for this type of task.
    Thanks in advance.

    Assuming you are using RandomAccessFile, you can use the locking functionality in the Java NIO library to lock sections of a file that you are reading/writing from each thread (or process).
    If you can't use NIO, and all your threads are in the same application, you can create your own in-process locking mechanism that each thread uses prior to accessing the file. That would take some development, and the OS already has the capability, so using NIO is the best way to go if you can use JDK 1.4 or higher.
    - K
    I need to read from and write into a same file
    multiple threads.
    How can we do that without any data contamination.
    Can u please provide coding for this type of task.
    Thanks in advance.

  • How to read from a certain location is a file?

    hi! i am new to programing and i have a problems abt reading from a file. i have write the following to a file using FmtFile :
    10 (a numbers)
    name,phone,product (some strings)
    9 (a numbers)
    when i user ScanFile to read the second number(9 in the above example), i got a wrong value. the command i use is:
    ScanFile (filehandle, "%d", &number1);
    ScanFile (filehandle, "%s[t44]%s[t44]%s",name, phone product);
    ScanFile (filehandle, "%d", &number2);
    number1 and number 2 are integers and name, phone and product are char arrays.
    can anyone tell me where have i gone wrong? or maybe someone can tell me how can i read the 2nd number without reading the 1st number
    and the strings.

    Let's look at your file: if I correctly interpret your question, one row in it should like like this:
    10,name,phone,product,9
    In this case you could use the following formatting string to read all data from the string:
    "%d[x]%s[xt44]%s[xt44]%s[xt44]%d"
    [x] means to discard terminator, in order to read from strings, for example, "name" and not "name,". It's important in this case to put ALL field separators.
    Maybe your problem is that in the file you don't have separators between strings and numbers: in this case the last "%s" should read the '9' inside the last string and the subsequent "%d" matches with incorrect area in the file (end-of-line or next row).
    Hope this help
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • How to read from a file line by line

    Hi
    I am new to using LabView and was wondering how I could read data from a text file one line at a time and display this data one line at a time as well. I tried looking through the Reading from Text File . vi example but that just seems to be reading and displaying everything together.
    Thanks
    -Karan

    Hi
    My aim is to read text line by line and to then go ahead and display the last 8 reaad lines of code to give the impression of text falling down a screen. I tested the first while loop and that seemed to work fine. However, when I encounter an EOF, I would like the text already read to keep making its way down the screen and keep inputting NULL characters into the array to simulate the effect of the text falling down the screen which is why I created the second while loop. I tried to input the NULL characters using a box for ENUM constants. However, I kept getting an error saying the data types do not match. What would I need to do? For the display I plan on putting indicators next to the 8 places where the text would be stored which I have not done so far.
    I am also attaching a copy of the error.
    Thanks
    -Karan
    Attachments:
    DisplayText.vi ‏40 KB
    Error.JPG ‏89 KB
    PictureOfBlock.JPG ‏120 KB

Maybe you are looking for

  • How do I get an itunes connect account

    how do I get an itunes connect account

  • SL upgrade and compatibility

    I have a Mac Mini running OS X v. 10.4.10. 1. Can I upgrade directly to Snow Leopard? 2. Will Adobe CS 2 applications still run?

  • Cant play Youtube video

    As the title indicates, I can not play You Tube video. Particularly this link https://www.youtube.com/watch?v=08iHSCxza2o It works in IE (yuk!) All help and assistance appreciated.

  • SQL Query - Report

    Hi I need to generate a report like SELECT table2.band, count of visitors for Month till Date, count of Unique visitors for Month till Date, count of repeat visitors for Month till Date, count of visitors for Today, count of Unique visitors for Today

  • SA won't start Mailman

    I'm trying to start Mailman with SA so I can go to the WWWeb interface and configure it properly, but I seem to be stuck at enabling mailing lists. I click on "Enable Mailing Lists", I get a popup asking me for the master MailMan password and an admi