How to read master data?
Can anyone tell me the procedure how to read master data?
Hi,
I am sorry but your question is a bit vague. What do you mean by your statement? Can you please elaborate your requirement.
Similar Messages
-
How to read master data in transformation routine?
Hi gurus,
I am loading data from 0HR_PA_0 data source.
I have 2 fields in the DS: PERNR (Personal Number) and CALMONTH (Calendar year/month).
I need to read 0EMPLOYEE's attribute 0ENTRYDATE and count the difference between Entry date and Calendar year/month.
Could you please help me with it? I don't know ABAP that much, so I am not able to write it by myself...
Regards,
DorotaHi Dorota ,
I guess your main problem is how to get difference of two dates in no of days.Please find following code for the same .
I am asumming that you want days difference from 01 date of month .If not then it can be changed as per requirement.Here the variable datediff will give you output in no of days .
data :v_date1 like sy-datum ,
v_date2 like sy-datum ,
datediff(6) type n.
v_date1 = '20100301'.
v_date2 = sy-datum.
datediff = v_date1 - v_date2 .
If you please clear some point I can help you to write code .My questions :
1) where you want to write this code .(start/end routine etc)
2) What will be your start day value (1st day of month) or date value from 0ENTRYDATE.
ex : 0ENTRYDATE = 20101223
CALMONTH = 201003
so we need day value for calmonth that can be 01 or 23 (as in 0ENTRYDATE).
Hope this will help .
Regards,
Jaya -
Problem in Read Master Data rule type in Transformation
Hi,
I have 'Tax Classification' & 'Sales Territory' as attributes for 0customer (Master data). I loaded master data for 0customer & data have come up for this 2 fields. I want this 2 fields in my DSO with data filled. As this 2 fields are not in Transaction datasource of my DSO, i added this 2 fields in the Target side in Transformation of the DSO. In Transformation, I gave the rule type as 'Read Master Data' from attribute of '0customer' & mapped KUNAG (Sold-to) to this 2 fields. Activated the Transformation & executed the DTP.
When i check the data, i could see that the Infoobject 'Sales Territory' column alone is filled but 'Tax Classification' column is blank. Tax classification has data in 0customer master data for the displayed customer values but still data is not coming in DSO.
How does this happen when both the fields have same mapping & rule type and still data not getting populated for one field alone. Am i missing anything?
Regards,
Muralihi,
the green request in MD does not means that the data in MD is activated, you need to activate it after loading everytime so that it reflects in where used list as well.
regards,
Arvind. -
How to load master data from SAP R/3 system like Customer master, materioal master , vendor master.............
Hi Bramha,
Check ...........
Re: master data loading in BI 7.0
/message/4708129#4708129 [original link is broken]
Re: Master data loading.
Regards,
Vijay. -
Read master Data is not behaving properly
HI All,
We have upgraded BI server with SAP_BW patch 17.
we have used Read master data rule type in the transformation to ODS and its giving proper output where as expected .But at the same time it also giving some improper out put ,means for those values which are not there in masterdata it is giving some wrong value , but while testing in to trasformation it is giving message for those entries that they are not available in the master data .What we did was loaded flat file for billing type in to Z infoobject contains two more info object in to attribute tab and in to those attribute through flat file we are loading some value and during transaction load we want attribute value to be filled for those biling type which were loaded in master data through flat file.
please help
regards
GauravHello
This is further to the problem described by Gaurav.
Let me explain the proble with an example
Consider the Master data:
Doc Type(key) Attr 1 Attr 2
ZORS PRODUCT Revenue
ZORD PRODUCT Revenue
ZORP PROJECT Revenue
ZMTO PROJECT Revenue
ZCOS SERVICE Revenue
Consider Transaction data
Doc Doc Type
10001 ZORS
10002 ZORD
10003 ZORP
10005 S1
10006 ZBDN
Expected O/p in the ODS is
Doc Doc Type Attr1
10001 ZORS PRODUCT
10002 ZORD PRODUCT
10003 ZORP PROJECT
10005 S1
10006 ZBDN
10007 ZCOS SERVICE
the Observed O/p
Doc Doc Type Attr1
10001 ZORS PRODUCT
10002 ZORD PRODUCT
10003 ZORP PROJECT
10005 S1 PROJECT
10006 ZBDN PROJECT
10007 ZCOS SERVICE
We are not able to understand how Attribute values are coming for Doc No 10005 and 10006.
We have recently applied patch 17.
Is there any reason for this
Thanks
Regards
zubin Kurian -
How to load master data in bpc 10
HIi All,
Could any one please share some documents/PDF or any link with me as how to load master data in BPC 10 Nw.
Regards
Bhupendra AryaBhupendra,
There are many docs/threads related to this in SDN, pls check.
SAP BPC NW 10.0 Master Data Load to BPC from BW | SAP BPC Discussions
Hope this helps.. -
How to load master data and hierarchies from R/3 systems
HI all,
how to load master data and hierarchies from R/3 systems.
Please explain the steps.
Thanks,
cheta.HI,
Its normally done following: Transferring the master datasources in RSA5 to RSA6 and then replicating the DS into BW and assignment of DS to Infosource and cretaion of Infopackage and load it into the master tables.
Generally, the control parameters for data transfer from a source system are maintained in extractor
customizing. In extractor customizing, you can access the corresponding source system in the source
system tree of the SAP BW Administrator Workbench by using the context menu.
To display or change the settings for data transfer at source system level, choose Business
Information Warehouse → General Settings → Maintaining Control Parameters for Data Transfer.
Note: The values for the data transfer are not hard limitations. It depends on the DataSource if these
limits can be followed.
In the SAP BW Scheduler, you can determine the control parameters for data transfer for individual
DataSources. You can determine the size of the data packet, the number of parallel processes for
data transfer and the frequency with which the status IDocs are sent, for every possible update
method for a DataSource.
To do so, choose Scheduler → DataSource → Default Settings for Data transfer.
In this way you can, for example, update transaction data in larger data packets in the PSA. If you
want to update master data in dialog mode, smaller packets ensure faster processing.
Hope this info helps.
Thanks,Ramoji. -
How 2 upload Master Data 4 a Info Object in BI 7.
Hi,
I have to load Master Data to a Info Object in BI 7 ( Like Diret Update in 3.5 )
How 2 upload Master Data 4 a Info Object in BI 7.
Dont suggest me to " Insert Characteristic as Data Target".
Points assured.
Thank you.hi...chk these steps..
Uploading of master data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. Alternatively monitor icon can be used.
hope this helps.. -
Error - InfoObject cannot be used to read master data
Hi All,
We am working on mapping objects in a transformation, on some of the transformation I am using the master data attribute to fill the infoobject. In some cases the mapping happens without incident but in others we are getting the following error
InfoObject cannot be used to read master data
Inside the long text of the message it says:
InfoObject does not have the correct attributes to be used to read master data for the target field
The object is one of the master data attributes, so we are not sure why we are recieving this error?
We have recieved it with 0COMP_CODE trying to load Fiscal Year Variant and with a non standard enhanced object ZMATERIAL which is a copy of 0MATERIAL with added attributes for Product Class, Product Group and Product Line wich come from the product hierarchy and are populated on the load of the material from product hierarchy.
Has anyone else had an issue with this error and can you tell us how you fixed it???
Thank you!
CarolineYou received this error for loading 0FISCVARNT (Fiscal Year Variant) because that InfoObject isn't an attribute of 0COMP_CODE (Company Code) and it cannot therefore determine what data to populate based on your input. Instead of using 0COMP_CODE, you may have to enter a constant value for the Fiscal Year Variant if you don't have it in your source InfoProvider.
When you created ZMATERIAL, did you use 0MATERIAL as a reference so that it would inherit the attributes and texts? If so, Product Class, Product Group and Product Line would have to be attributes of 0MATERIAL. If you didn't reference 0MATERIAL and are loading attributes directly to the custom InfoObject attributes, then Product Class, Product Group and Product Line would have to be attributes in ZMATERIAL in order to use the Use Master Data function for transformations. You may have to derive the values for these different, such as add ABAP for lookup routines. -
How to read the data in excel sheet
Dear sir,
How to read the data in excel sheet when i recieve a data serial communication... ie i have store a data in excel such that
Cell A Cell B
A Apple
B Ball
C Cat
D Doll
when i recieve A from serial communication i have to display Apple, and when i recieve B i have to display Ball and so on..Hi,
I would recommend you to have a look at the VI attached. It makes use of a VI named 'Read from Spreadsheet' to read the row and column data from the tab delimited excel file. The read data is then searched for the Alphabet specified and finally returns you the corresponding string. The test file used to validate the operation of the VI is also attached.
Trust this would help you solve the issue.
Regards,
Sagar G Yadav | Application Engineer | National Instruments
Attachments:
read_from_excel.vi 10 KB
Book1.txt 1 KB -
Read Master Data for Process order status change (REL to CRTD)
I am unable to read master data and thus change the status of process order from REL to CRTD. (COR2)
The reason it says, error in BOM reading, Transport Requirement (TR) already generated.
Even after deleting the TR (LB02), the issue still exists.
Is there another way of changing the status or some more steps are needed for the TR deletion?
Thnx!
Abhi.Order header Status-
REL Released
MSPT Material shortage
PRT Printed
PRC Pre-costed
BASC Batch assignment complete
BCRQ Order to be handled in batches
SETC Settlement rule create.
In the error log it gives-
Diagnosis
Transfer requirements have already been generated, so therefore the bill of material cannot be read.
System Response
The system does not execute the action.
Then I deleted the TR (LB02), but still I cannot reread the master data.
The MSPT was for only 2 materials out of 6 and there is no GMPS status.
There is prod supply area and control cycle used.
and the TR generated at order release. -
How to read a data from USB port using JAVA
hi all,
i need to know how to read a data from USB port using java. any API are available for java ?.........please give your valuable ideas !!!!!!!!!
Advance Thanks!!You can do this. Please use this link
[http://www.google.co.in/search?hl=en&client=firefox-a&rls=org.mozilla%3Aen-US%3Aofficial&hs=uHu&q=java+read+data+from+usb+port&btnG=Search&meta=&aq=f&oq=]
What research did you do of your own? Have you done some testing application and tried yourself?? -
How to read the data from Excel file and Store in XML file using java
Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com -
Error while assigning infoobject to the read master data in rule type
Hi sdns,
I want to read the zwostd info object data from zemployee master infoobject attribute list. For that i have selected rule details of zwostd infoobject in transformation of info cube, then i am tring to select the read master data rule type. It is taking more time and then it displayed error like permitted time was exceeded. Could any one please give me the solution for this problem.
thanks
karunSometimes directly typing the infoobject name in the field helps - otherwise it tries to fetch all the infoobjects available which is possibly why the time out occurs..?
Enter the Master Data infoobject directly and then you will get the fields assigned.
However my experience with read master data has been that whenever you change the master data IOBJ by way of adding / removing Nav Attributes / attributes etc - all the transformations using the read master data for the IOBJ that is being changed will get deactivated and it is a pain reactivating and transporting them again - particularly so when you are developing something on them and the changes are stuck across multiple requests ...
IMHO use a routine instead to do the same - it involves lesser maintenance. SAP is anyway going to run a similar SQL... -
Hi all, I'm new to using the labview, and I have some trouble doing my project using the labview software.
I have been trying to use the spectrum analyzer (Anritsu MS2661C) which connect to computer using the GPIB connection.
I have got the instrument driver which can write and control the instrument using Labview 2010.
and my Question is how do read the data or result from the spectrum analyzer and send it to the microsoft excel?
Do I need to use other software or programming to do this step?
If anyone know how is this done, please let me know.
Regards,
EryHi ery,
In order to send data that you have read in from an instrument to Excel, the most convenient way to do this would be to use our Report Generation Toolkit. The Report Generation Toolkit is a very useful tool that allows you to interface to Microsoft Office software from LabVIEW, including Word and Excel. I am not sure if you are familiar with this, but I have attached a link that explains more about the Report Generation Toolkit below.
Another way would be to use the Write To Spreadsheet File VI. While this will store your data to a spreadsheet data file, it will not allow you to programmatically perform any Excel formatting like the Report Generation Toolkit offers. I have also attached a link to some information on the Write To Spreadsheet VI below.
Also, be sure to check out the Example Finder in LabVIEW for a number of examples on how to write data to a spreadsheet file. From LabVIEW, you can go to Help»Find Examples to launch the Example Finder. From there, you can search for "spreadsheet," which should populate examples for use in different applications. I hope this helps, ery. Please let me know if you have any further questions about these!
NI LabVIEW Report Generation Toolkit for Microsoft Office
Write To Spreadsheet File VI
Taylor G.
Product Support Engineer
National Instruments
www.ni.com/support
Maybe you are looking for
-
Is there a way of aligning the images in iweb photoalbums other than have them be a square?I have them at same height and resolution but htere is a default that shrinks them and aligns them at the bottom.Thanks.
-
Problem Importing photos from Canon Rebel XTi -- Iphoto '08
When I plug in USB cord to camera and MacBook, then turn on my Canon Rebel XTi, iPhoto opens up but will not read the CF card. The status light on the camera just blinks red as if it working on it but it never does show the photos in iPhoto08 and the
-
COM Surrogate has stopped working
I've read the posts about this and nothing is working for me. I started getting this message a few weeks ago. It comes up whenever I go into the folder I have video files stored in. It pops up, telling me the COM Surrogate has stopped working and a
-
Service invoking another webservice
I want to create a webservice. First request i want to give insert/select as input. If I give insert as input it must take to another form with the fields of database and if I give select as input it must perform the select operation.
-
A question on a future purchase
Ok, right now i do not own a laptop, but i am thinking of buying the GP70 Leopard as a replacement for my old one that died several years ago (i've been stuck using a shared computer for a while now). So far, everything i've seen about it seems to be