How to read multiple segments with same name in IDOC

I want to read segments in IDOC say e1edk02.I am using orders05 idoc.
BUT If I use the statement
CONSTANTS :
c_segnam1 type char19 value 'E1EDK02'.
read table idoc_data into wa_idocdata with key segnam = c_segnam1.
It will read only one segment.but we are populating 2 e1edk02 segments.

LOOP AT IDOC_DATA
    WHERE DOCNUM = IDOC_CONTRL-DOCNUM.
    CASE IDOC_DATA-SEGNAM.
      WHEN 'E1EDK02'.
       MOVE IDOC_DATA-SDATA TO E1EDK02.
reward if useful
check FM idoc_input_orders for reference

Similar Messages

Read multiples files with same extension

how to read multiples files with same extension in java.
for ex : i would like to read all .DAT files from C drive using java.
How is it done

- You create the filter
- You get the list of files
- You open and read each file.
For the first two above you look at java.io.File and listFiles(FileFilter filter).
For the third you find whatever input stream is appropriate from java.io.*

Mounting multiple directories with same name on different severs to a single mount point on another server

We have a requirement where in we have multiple solaris servers and each solaris server has a directory with the same name.
The files in these directories will be different.
These same name directories on multiple severs has to be mounted to a single directory on another sever.
We are planning to use NFS, but it seems we can not mount multiple directories with same name on different severs to a single mount point using NFS, and we need to create multiple mount points.
Is there any way we can achieve this so that all the directories can be mounted to a single mount point?

You can try to mount all these mount points via NFS in one additional server and then export this new tree again via NFS to all your servers.
No sure if this works. If this works, then you will have in this case just an additional level in the tree.

How to separate two contact with same name

Hi, anyone knows how to separate two contacts with same name in Contacts? Actually they are two persons from two gmail contacts with same name but different contact numbers, different emails....etc, but Contacts assume they are same person and merge them as one!

FG,
In Lion, you have the File > Duplicate option. You will then have two copies of your document open, and the one on top will have the temporary filename "OriginalFileName copy", and your next responsibility is to File > Save (or Command-S) and rename the duplicate. At this point, you edit the copy's name, to perhaps ...copy 1, or whatever you wish. The document you had open when you initiated the File > Duplicate will still be there on your screen, waiting for you to Close it or continue editing.
Jerry

How to create device IDs with same name

i am using SE 3310 and its creating different device ids for each node sharing it . since I will be building a RAC enviornment I need these IDs/name to be same .
for example on one node the lun id is /dev/rdsk/c3t0d0s6 but the same lun id on node 2 is /dev/rdsk/c2t0d0s6.
In past with an old storage array I fixed this issue by creating links in /dev/rdsk for c3t0d0s6 ---> c2t0d0s6.
my question is : is there a way in SE3310 that device ids get created with same name or do i still have to rely on creating these soft links ?
thanks
Note: since i need the answer to this quickly i will wait a while and then post this question in other forums and i will update the question here with the answer .

This could be a Solaris (I presumed) O.S. question rather than SE3310 or storage question.
The logical device (/dev/[r]dsk/*) is the work of the O.S. when it first configures the device, in this case the LUN from your SE3310.   I can go in depth on how the cX number happens (due to device probe order, driver differences, history of device discovery due to need of persistent device naming, etc...) but ... it's a really long story and is really quite irrelevant and most people should not be interested...
If you have COMPLETELY identical servers, i.e. identical hardware down to specific HBA in specific slot are the same,   and if you make sure that luns are presented to all servers exactly the same way, same order, and any changes are seen by all servers in the same sequence, in theory, all /dev/rdsk/* devices will be consistent across servers.
But that's still rather irrelevant.    Application that is designed to work in a redundant environment should not be dependent on logical devices like /dev/rdsk being the same.
So ... in effect this is also not a question for the Solaris forum, but rather a question for those familiar with RAC, how to configure such that device access is done "safely" through actually identifying the lun rather than assuming /dev/rdsk are consistent.

How to create two employees with same name as supplier record?

Dear all,
We need to create a supplier record for an employee so that we can issue invoice for pretty cash payment. If there are 2 employees with same name, how can we create supplier records for these 2 employees? The system does not allow duplicate supplier name.
Please advise.
Regards,
HY

Hello,
In R12 it is possible to create 2 employee with same name but different employee number.
And also possible to create these 2 employees as suppliers in Payables.
HTH,
Vik

How to create logical directories with same name on two databases

Hi,
OS: Windows
Oracle Version : 10g
I have to databases in one oracle home. I have created some logical directories in one database. When I am trying to create logical directories with same name in another database, it is overwriting the first database directory paths with the second one
Can't we create directories with same name but different path in two databases on one machine?
Pls suggest me on this
Regards,
Vijay

I am trying to create logical directory using CREATE
DIRECTORY statement. I am very much aware that the
create directory statement doesn't create directory
on OS. But we can attach the physical directory on OS
to logical directory in oracle
My requirement is to create logical directories in
oracle mapping the OS directories. Both the
databases, wil have same logical directory names but
different OS directory mappingsIf I understand you correctly, you can do this:
On DB 1
CREATE OR REPLACE DIRECTORY same_dir_name as 'C:\myoracle\mydir1';
On DB 2
CREATE OR REPLACE DIRECTORY same_dir_name as 'D:\myoracle\mydir2';
What stops you from doing that ?
Note: If what you have is one database but different connections, then you are connecting to one database. The above second statement will drop and replace with the first one

Migrating multiple domains with same name - how? Rename? Migrate through temporary domain?

Hi,
we have acquired another company, and they have multiple, separate domains with the same name (every site has a domain with NetBIOS name "COMPANY" and DNS name "company.local"). Now we want to migrate all these domains into ours using
ADMT.
Unfortunately, we did not manage to migrate one of these domains completely, so the trust must remain established for some time. But we have to continue with the second domain - which normally would require a trust, but of course we can't establish a trust
to two domains with the same name at the same time.
I found two potential solutions for the dilemma, but I'm not sure if both are reasonable:
1) Rename the domain with RENDOM.EXE to COMPANY2 and company2.local and then migrate with ADMT
2) Migrate COMPANY to a temporary domain such as COMPANYTEMP and then migrate from COMPANYTEMP to our domain
Given that there are roughly 100 users, 2 domain controllers and 8 other servers, what would be the better approach? Is option 2 possible at all, so would I be able to use the sidHistory attribute migrated from the original COMPANY domain in our domain at
all?
There is also an Exchange 2007 server, which seems to make option 1 impossible unless we find another way to migrate it (like, export all mailboxes to PST before migration) ...

Ok, that's what I expected. Still, I have servers in the old domain, so if I do these steps:
first create a new temporary domain i.e COMPANYTEMP and
create trust between COMPANYTEMP -
COMPANY(Right)
then do the migration with sidHistory from COMPANY(right) --> COMPANYTEMP ,
disconnect the domain COMPANY(right) ,
users will lose connectivity to any servers in the domain. I understand that it does not work with all domains connected? Of course I can't make OURCOMPANY's domain controllers see the DCs of COMPANY (right) in DNS (though I could achieve it the other way
round).
My original plan was:
first create a new temporary domain i.e COMPANYTEMP and
create trust between COMPANYTEMP -
COMPANY(Right)
then do the migration with sidHistory from COMPANY(right) --> COMPANYTEMP ,
create trust between OURDOMAIN and COMPANYTEMP
then do the migration with sidHistory from
COMPANYTEMP --> OURDOMAIN,
Migrate users
Migrate computers
Migrate servers
remove trusts and old domain
But I see that this will not work out, right? So, my only option would be:
first create a new temporary domain i.e COMPANYTEMP and
create trust between COMPANYTEMP -
COMPANY(Right)
then do the migration with sidHistory from COMPANY(right) --> COMPANYTEMP ,
Migrate computers and servers to COMPANYTEMP
Install new Exchange server in COMPANYTEMP
migrate mailboxes to COMPANYTEMP
disconnect / abandon COMPANY(right)
create trust between OURDOMAIN and COMPANYTEMP
then do the migration with sidHistory from COMPANYTEMP
--> OURDOMAIN,
Migrate users
Migrate computers
Migrate servers
Migrate mailboxes
remove trusts and old domain
And to minimize user impact, all this would have to be done in one go (over night), which is hardly possible .........................

How to check-in multiple files with same name having different revision num

Hi
Can anyone please tell me, how to check-in multiple files with the same name with different revision number using RIDC API.
For eg:
First I will check-in a file(TestFile.txt) into a content server with revision number 1 using RIDC API in ADF application. Then after some time, will modify the same file(TestFile.txt) and check-in again. I tried to check-in same file multiple times, however first time its checking-in correctly into server showing revision as 1, while checking-in same file again, its not giving any errror message, and also its not reflecting in server. Only one file(TestFile.txt) is reflecting in server.
How to implement this functinality using RIDC API? Any suggestions would be helpful.
Regards
Raj
Edited by: 887680 on Mar 6, 2013 10:48 AM

Hi Srinath
Thanks for your response. Its not cloning, its like check-in file first, then check-out the file and do some editing and then again upload the same file with different revision number using RIDC. I got the solution now.
Regards
Raj

How do I automate merging multiple layers with same name?

It was suggested I ask this question in this forum - any advise gratefully received!
I have to combine over a 800 files into one photoshop file. Each file has with sixty layers. The 60 layers in each file are named identically: Layer 1, Layer 2, Layer 3 up to Layer 59, Layer 60. My intention is to create a final composite file with 60 merged layers (for an animation). That is, with all the Layer 1's merged, all the Layer 2's merged, all the Layer 3's merged and so on. What I need is a script which will merge all layers with the same layer name, ie all the Layer 1s, all the Layer 2s etc (ideally without having to merge each set of layers separately).
I am using Photoshop CS6 and at present I am merging by using the find/name function, then highlighting all the layers selected and then using 'merge layers'.
Any ideas?
Best
JR

This might be close, it will prompt for a folder containing all the 800 files, it will use tif or psd files.
Once you have selected the folder sit back and watch...
#target photoshop
app.bringToFront();
main();
function main(){
selectedFolder = Folder.selectDialog( "Please select input folder");
if(selectedFolder == null) return;
var fileList = selectedFolder.getFiles(/\.(tif|psd)$/i);
open(fileList[0]);
checkBackGround();
setLayersVisOn();
for(var z = 1;z<fileList.length;z++){
    open(fileList[z]);
    checkBackGround();
    setLayersVisOn();
    dupLayers(app.documents[0].name);
app.activeDocument.close(SaveOptions.DONOTSAVECHANGES);
if(z % 9 == 0) mergeSameNamedLayers();
mergeSameNamedLayers();
function checkBackGround(){
activeDocument.activeLayer = activeDocument.layers[activeDocument.layers.length-1];
if(activeDocument.activeLayer.isBackgroundLayer){
    activeDocument.activeLayer.name=activeDocument.activeLayer.name;
function twoOrMoreSelected(){
var ref = new ActionReference();
ref.putEnumerated( charIDToTypeID("Dcmn"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
var desc = executeActionGet(ref);
if( desc.hasKey( stringIDToTypeID( 'targetLayers' ) ) ) return true;
return false;
function mergeSameNamedLayers(){
//Get a list of the layer names
var layerNameList = getNamesPlusIDs();
//create an array for unique layer names
var uniqueName = new Array();
for(var s in layerNameList){
    if(layerNameList[s][2] == "false") uniqueName.push( layerNameList[s][1].toString());
//now we should have unique layer names
uniqueName = UniqueSortedList( uniqueName ).sort();
//select all layers with the same name, merge them and set blendmode
var BlendMode = new String();
for ( var w in uniqueName){
    deselectLayers();
    for(var z in layerNameList){
        if(uniqueName[w].toString() == layerNameList[z][1].toString()){
            //select these layers and get blendmode.
            BlendMode = layerNameList[z][3].toString();
            selectLayerById(Number(layerNameList[z][0]), true);
if(twoOrMoreSelected()) activeDocument.activeLayer.merge();
        setBlendMode(BlendMode);
function setBlendMode(blendMode) {
var desc = new ActionDescriptor();
var ref = new ActionReference();
ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
desc.putReference( charIDToTypeID('null'), ref );
var desc2 = new ActionDescriptor();
desc2.putEnumerated( charIDToTypeID('Md '), charIDToTypeID('BlnM'), stringIDToTypeID(blendMode) );
desc.putObject( charIDToTypeID('T   '), charIDToTypeID('Lyr '), desc2 );
executeAction( charIDToTypeID('setd'), desc, DialogModes.NO );
function deselectLayers() {
    var desc01 = new ActionDescriptor();
        var ref01 = new ActionReference();
        ref01.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
    desc01.putReference( charIDToTypeID('null'), ref01 );
    executeAction( stringIDToTypeID('selectNoLayers'), desc01, DialogModes.NO );
function UniqueSortedList(ArrayName){
var unduped = new Object;
for (var i = 0; i < ArrayName.length; i++) {
unduped[ArrayName[i]] = ArrayName[i];
var uniques = new Array;for (var k in unduped) {
   uniques.push(unduped[k]);}
return uniques;
function selectLayerById(ID, add) {
    add = (add == undefined) ? add = false : add;
var ref = new ActionReference();
ref.putIdentifier(charIDToTypeID('Lyr '), ID);
var desc = new ActionDescriptor();
desc.putReference(charIDToTypeID('null'), ref);
if (add) {
desc.putEnumerated(stringIDToTypeID('selectionModifier'), stringIDToTypeID('selectionModifierType'), stringIDToTypeID('addToSelection'));
desc.putBoolean(charIDToTypeID('MkVs'), false);
executeAction(charIDToTypeID('slct'), desc, DialogModes.NO);
function dupLayers(DocName) {
var desc = new ActionDescriptor();
var ref = new ActionReference();
ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
desc.putReference( charIDToTypeID('null'), ref );
var ref2 = new ActionReference();
ref2.putName( charIDToTypeID('Dcmn'), DocName);
desc.putReference( charIDToTypeID('T   '), ref2 );
desc.putInteger( charIDToTypeID('Vrsn'), 5 );
executeAction( charIDToTypeID('Dplc'), desc, DialogModes.NO );
function selectAllLayers() {
    var desc29 = new ActionDescriptor();
        var ref23 = new ActionReference();
        ref23.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
    desc29.putReference( charIDToTypeID('null'), ref23 );
    executeAction( stringIDToTypeID('selectAllLayers'), desc29, DialogModes.NO );
function setLayersVisOn(){
   var ref = new ActionReference();
   ref.putEnumerated( charIDToTypeID('Dcmn'), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
   var count = executeActionGet(ref).getInteger(charIDToTypeID('NmbL')) +1;
try{
    activeDocument.backgroundLayer;
var i = 0; }catch(e){ var i = 1; };
   for(i;i<count;i++){
        ref = new ActionReference();
        ref.putIndex( charIDToTypeID( 'Lyr ' ), i );
        var desc = executeActionGet(ref);
        var layerName = desc.getString(charIDToTypeID( 'Nm ' ))
        if(layerName.match(/^<\/Layer group/) ) continue;
        if(!desc.getBoolean(stringIDToTypeID('visible'))){
            var list = new ActionList();
            list.putReference( ref );
            desc.putList( charIDToTypeID('null'), list );
            executeAction( charIDToTypeID('Shw '), desc, DialogModes.NO );
function getNamesPlusIDs(){
   var ref = new ActionReference();
   ref.putEnumerated( charIDToTypeID('Dcmn'), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
   var count = executeActionGet(ref).getInteger(charIDToTypeID('NmbL')) +1;
   var Names=[];
try{
    activeDocument.backgroundLayer;
var i = 0; }catch(e){ var i = 1; };
   for(i;i<count;i++){
       if(i == 0) continue;
        ref = new ActionReference();
        ref.putIndex( charIDToTypeID( 'Lyr ' ), i );
        var desc = executeActionGet(ref);
        var layerName = desc.getString(charIDToTypeID( 'Nm ' ));
        var Id = desc.getInteger(stringIDToTypeID( 'layerID' ));
        if(layerName.match(/^<\/Layer group/) ) continue;
        var layerType = typeIDToStringID(desc.getEnumerationValue( stringIDToTypeID( 'layerSection' )));
         desc.hasKey( stringIDToTypeID( 'smartObject' ) ) ? SO = true : SO=false;
         var blendmode = typeIDToStringID(desc.getEnumerationValue( stringIDToTypeID( 'mode' )));
Names.push([[Id],[layerName],[SO],[blendmode]]);
return Names;

How to read multiple files of different name using single file adapter

There are two inbound locations inbound1 and inbound2 , and the files structure present in these two inbound locations are same but the files start with different names example
(1)files in inbound1 starts with file1,file2...
(2)files in inbound2 starts with abc1,abc2...
by using same file adapter with read option how can i read both files....

Hi K.A.N.N.,
You can define multiple directories using the above link in 11g and poll for the file as \*.*.
Alternatively you can use the Synchronous Read and specify the file name at runtime.
You can also use Pick activity to define multiple branches each with a File Adapter to read from a specified location with specified file name. Although it would contain multiple Adapter Definitions at Development-time, only one of the Adapters will execute at Run-Time.
Regards,
Neeraj Sehgal

Chart creation using multiple series with same name

I'm new to Numbers and to chart creation in general, so I'm not sure if Numbers is capable of what I need. But if so, I'd like to know how...
I have a large spreadsheet with hundreds of lines of expense data, wherein each line item falls into one of a dozen categories of expense types. I would like to create a pie chart by expense type (ie, Healthcare, Automotive, Travel, etc), but Numbers wants to treat each line item as a separate expense, even though many of them share the same name. So I'm getting multiple pie slices that all say "Travel" and so forth. I really just want one pie slice for Travel, one for Auto, etc.
So how can I make Numbers calculate the subtotals for each expense type and use those subtotals to create the chart? Is there a way to do this within the chart function or do I need to create a separate table for just the subtotals (not sure how to do that either) or what?
Thanks!

It appears that I missed your question.
Here is a way to treat the problem:
In Tableau 2 column B the formula is:
=SUMIF(Tableau 1 :: B,A,Tableau 1 :: C)
The column A of Tableau 2 is a header.
Yvan KOENIG (from FRANCE lundi 14 avril 2008 14:26:37)

Multiple objects with same name when rebuilding index online

I am looking for advice on how to handle a race-condition in sql server, related to reading metadata while an online index rebuild is being performed.
The problem is as follows:
At some point we execute the following statement:
SELECT
obj.object_id AS id,
scm.name AS scm,
obj.name AS name,
obj.type AS type,
ds.name AS dataspace_name,
prop.value AS description,
part.data_compression_desc as compression_desc
FROM sys.objects AS obj
INNER JOIN sys.schemas AS scm ON obj.schema_id = scm.schema_id
INNER JOIN sys.indexes AS idx ON obj.object_id = idx.object_id AND idx.type IN (0,1)
INNER JOIN sys.data_spaces AS ds ON idx.data_space_id = ds.data_space_id
INNER JOIN (SELECT object_id, data_compression_desc FROM sys.partitions WHERE index_id IN (0,1) /*Heap, Clustered*/) AS part ON part.object_id = obj.object_id
LEFT OUTER JOIN sys.extended_properties AS prop ON obj.object_id = prop.major_id AND prop.minor_id = 0 AND prop.class = 1 AND prop.name = 'Description'
WHERE obj.type = 'U' OR obj.type = 'S'";
The statement returns some metadata for indexes (indices?), the purpose of wich is not the subject.
When executed while an online index rebuild is running, a race condition occurs: When the rebuilding enters the final phase, the new index, which have the same name, becomes visible and thus results in two rows with the same name (from sys.object). I am unaware
if this only occurs for clustered index (which is what we have observed).
We became aware of this behaviour, as we added the metadata to a .Net Dictionary using name as key, and received a duplicate key exception. We have, hoewever, not been able to reproduce the situation, due to the nature of the race condition, and we found very
little documentation on the subject.
What we would like to do now, is to differentiate between the two. We see two options:
1) We could just use the first of the rows and ignore the second. This solution would require that the metadata for both rows are identical.
2) We could discern the "real" index from the "rebuilding" index. This requires some kind of extension of the Where-part.
We have not been able to determine if the requirements for either option is present, as we havent found any documentation, nor have we been able to test for differences, as we cannot reproduce the situation.
We would also like some way of reproducing the situation, so ideas as to how to do that is welcome.
Can anyone direct me to relevant documentation, or alternate solutions.
HRP

1. Use the index with the lower fragmentation to identify the newly rebuilt index (as it almost always will have lower fragmentation)
2. To reproduce, block the online index rebuild process by trying to alter the table's definition in a transaction (and don't commit, which will place schema lock on the table)
Satish Kartan http://www.sqlfood.com/

Global Address List for multiple people with same name?

When writing a new email, I want to add a name from the global address list of my microsoft exchange Contacts group. I select the blue plus button and type in the name. If there is more than one person in my company with the same name, both people will show up. However, Mail is not letting me see the details of either of the two people so I don't know which one is the right one.
However, if I start from Contacts, Groups, Exchange and type in that person's name, when I select a name, a second screen will show up with the details (email address, title, etc) of the person. That way, I know which one is the correct person who I want to email. Why can't I do this directly from Mail? If I need to send an email to multiple people from the GAL, I don't want to have to search for them via Contacts.
Thanks!

I don't know the exact and complete specification of your intended schema...
anyway, from what I can see in your post, I assume that
<deed>
    <deed_type>
        <name>Quit Claim</name>
        <value>Sheriff</name>
    </deed_type>
    <deed_type>
        <name>sheriff's deed</name>
        <value>Sheriff</value>
    </deed_type>
    <deed_type>
        <name>Warranty</name>
        <value>W</name>
    </deed_type>
</deed>would be the "proper" way to go...
which makes your "deed_type" a complexType, including a sequence of two kinds of xs:string elements : "name" and "value"

Multiple apps with same name

With all the trouble I've been having with App Store update inconsistencies, I went and looked at the directory where the .ipa files are stored. (These are the actual application files.) I was already aware of the multiple generations of files that are kept in the directory when apps are updated, but I noticed something else...
There are some applications that have the same name. In my case, I have more than one Solitaire game simply called "Solitaire" and I have more than one Sudoku game with the name "Sudoku". It looks like the way iTunes differentiates them is by giving them generational number. For example, one Sudoku program is called "Sudoku.ipa", and another is called "Sudoku 1.ipa". Then if there is an update to the first program, it gets the new name "Sudoku 2.ipa". You can see that different programs have different files sizes, but by looking at names there is no way to tell which is which.
I wonder if this factors into some of the problems with application updates and synching them to the iPhone? It seems odd that the same sequential numbering scheme is used for two different purposes: 1. Distinguishing different applications that have the same file name, and 2. Keeping multiple generations of the same program in the directory. It could get pretty confusing.

If I delete extra .ipa files when two different applications have the same name, then I need to keep track of which is the current version of what. "Sudoku 4.ipa" might be the latest version of one program, and "Sudoku 7.ipa" could be the latest version of another.
I wish Apple would create a naming scheme where every application has a unique name, and sequential generations are not used. This would make it much cleaner, and there would be no ambiguity as to either which program is which, or which version is which.
I find the safest way to get rid of all the dups is to just delete them all and re-download the app. The bugs in iTunes still make a mess of things, though.

How to read multiple segments with same name in IDOC

Similar Messages

Maybe you are looking for