How to read Nikon D600 NEF files

I bought a Nikon D600 but am unable read the NEF files read with my version of Lightroom 3 that runs on an older Mac Book which cannot be upgraded to LR4.  If I buy a new Mac, can I upgrade to LR4 on the new machine or do I have to purchase a new version?  If I can upgrade how do I transfer LR3 to the new machine.  Also, I have a student version of Photoshop CS5 Extended.  Can I purchase an upgrade to CS6 on a new machine? 
In doing research I saw where both Lightroom 4 and Photoshop CS6 had some problems with Apple's OS X 10.8.  Have these been resolved yet?

The D600 is diectly supported by Lightroom 4.2/Camera Rw 7.2 and higher.  So updgrading to Lightroom 4 or Photoshop CS6 will provide full suppor for the D600. Alternatively, you can download the free DNG Converter 7.2 or higher and use it to convert your NEF files to DNG format which is already supported by Lightroom 3.x
You can upgrade from Lr3 to Lr4 on your old and/or new machine as there is no activation code to stop you. You'll probbaly be asked for the Serial Number for Lr3 on the new machine to prove that an upgrade is legitimate. Buying Photoshop CS6 then upgrading the new machine to this is also possible, but you'll need either the DVD for CS5 or have it already installed on the new machine. Basically, CS6 needs to see that a copy of CS5 is available for installation or already on the computer.
As to the problems with 10.8. These have been addressed.
Download link for DNG converter 7.3 http://www.adobe.com/support/downloads/detail.jsp?ftpID=5518
Download link for Lr 4.3 http://www.adobe.com/support/downloads/detail.jsp?ftpID=5520

Similar Messages

  • Nikon D600 NEF files and Photoshop CS3

    Hi,
    I am using Photoshop CS3 and cannot upload Nikon D600 NEF files--obviously a gap between the two debuts.  Are there any suggestions, or am I stuck upgrading?
    Thanks

    You could get Lightroom 5, then output your files as tiffs to be opened in CS3.  I haven't used the standalone DNG converter, so I'm not sure if that gives you the option to save as a tiff also.  You could try the dng converter first to see if you can save as another file type, or use a legacy DNG version that is conpatable with CS3.

  • I cannot read Nikon D600 raw files with CS5

    I cannot read Nikon D600 raw files with CS5, I have tried Camera Raw 6.1 update but that has not worked.

    Nikon D 600 will work with ACR 7.3 which needs minimum of PS CS 6  : http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    With PS CS 5, ACR 7.3 will not work.
    So either you need to upgrade to CS 6 or use DNG converter to convert images to DNG format which you can open in CS 5

  • Opening Nikon D600 NEF files using PhotoShop CS4 11.0.2 and ACR 5.7.0.213

    Hello,
    I've just bought a Nikon D600.
    I have Photoshop CS4 11.0.2 and ACR 5.7.0.213. 
    With these versions, I'm unable to open the D600 NEF files.  I get the following message:
    "Could not complete your request because it is not the right kind of document"
    Yet I can view the NEFs in other software that pre-dates the D600, e.g. FastStone Image Viewer 4.6.
    Does anybody know if I can get a plug-in from Adobe for PS CS4 that allows me to edit D600 NEFs?
    Many thanks for any help.
    Regards,
    Aisling

    Either upgrade to Photoshop CS6 or download the free DNG Converter and covert your NEFs to DNG.

  • Help with Nikon D600 NEF files, CS6, and ACR 7.3 beta

    I have been unable to open NEF files from my Nikon D600 in Photoshop CS6, and ACR 7.3 beta.  Any suggestions/guidance would be much appreciated.
    RAW was set to 14 bit color, but I can't see that that would matter?

    From discussion with others, it would appear that the files were corrupted during transfer. 
    I have some suggestions that I will try tomorow.
    I have no problems opening old Nikon D700 NEF files in Photoshop CS6, and when ACR opens the file it indicates I'm using ACR 7.3 beta.
    Regards,
    Erich

  • Nikon D600 NEF file import problems

    Hi,
    Lr won't import NEF files from my nikon d600 even though i've upgraded my software to Lr 4.41 and camera raw 7.4, which according to what i have read on the web, should be enough. 
    Has anybody got any ideas / encountered this problem themselves before?
    Thanks in advance!

    It was my understanding as well, that the latest Lr4 would support those D600 files. I would consider trying with Lr5.2 trial as a test, or converting to DNG prior to import, as a test...
    But maybe first: Copy (using OS, not Nikon Transfer) from card to hard disk, then try adding in place. - works?
    R

  • Question: Programs that work with Nikon D600 .NEF files

    I recently upgraded to the Nikon D600.  With that, I’m unable to open RAW images in the programs that I currently have (PS Elements 9).  Does Photoshop Elements 11 have the correct software (Camera Raw 7 and higher)?  Or will I need to get the full version Photoshop CS6?
    Thanks for any help you can offer!

    PSE11 will handle your NEF files but you will need to update immediately after installation using:
    Help >> Updates
    Also look at Lightroom 5. Unlike Elements it has all of the raw tools from CS6 in an intuitive interface designed for photographers by photographers.

  • New Nikon d600 NEF files not supported by Elements9

    I have a question, my old Nikon d3000 and photoshop elements9 had worked great together.  Now I upgraded my camera to the Nikon d600 and the RAW files are not supported by it... Any suggestions how to resolve this?

    The D600 only gets full support in version 7.3 which is out of beta testing and now available as a release candidate. You may want to wait for the final version of camera raw 7.3 which will be available shortly. Alternatively download the release candidate now but make a not to update when the final version is released.
    Adobe Labs Downloads click here DNG Converter 7.3 RC
    You can convert a whole folder of NEF images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • Nikon D600 Nef files

    Hi,
    I am unable to read teh NEF files from my Nikon D600 in Elements 9, I have tried installing patches to get this working.
    I then tried installing a trial of Elements 11 but still no joy
    Dave

    PSE11 will read D600 raw files if you update the Camera Raw plug-in to ACR 7.3 using Help / Updates, if the trial allows that.
    You might also try the direct-download installers:
    http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html#notconnected

  • How to open Nikon D7000 NEF Files in Photoshop CS3

    i have installed the 4.6 camera raw update but it does not recognise the D7000 NEF Files... same for Bridge.  what can i do to view files directly in CS3?

    Every camera model must be profiled and specifically supported, and Adobe only updates the current version of Photoshop when they add support for each new camera.  You should upgrade your tools just like you upgraded your camera.
    None of your new camera's NEF files should be viewable by CS3-vintage components, but all of your DNGs should be viewable by such, and if some aren't, then it sounds like your files may be getting corrupted on their way from the camera to the computer.  Are you using a cable to the camera or are you using a card-reader to access the images?  Using a card reader is preferable.  Some cameras have different modes their USB-connection can be in and something other than mass-storage mode can lead to problems.  I don't have a Nikon so am not sure of things more specifically, but if you can use a card-reader and just use Windows Explorer to copy the images that would probably be the best thing.  If you have a new memory card that could also be something to look at.

  • CS5 (camera raw 8.7.1) not reading Nikon d810 NEF files

    I just purchased Nikon d810. I have CS5. All updates are current and I've downloaded Camera Raw 8.7.1 but Photoshop/Bridge still can not read NEF files. What am I doing wrong?

    If you have Windows, go into the Control Panel > All Items > Autoplay
    Uncheck Autoplay (I keep it off because I don't want Windows doing anything automatically, I like to make that decision).
    Next to the Pictures category, set the drop-down menu to "Take no Action".
    Then when you insert a SD card, Bridge would see it under "Computer", but you would have to double-click to open it, and go to the folder that has the pictures.
    One warning: Don't do any processing off an SD card. Make copies and put them in a folder on your hard drive. Too much can go wrong with flash memory and it's unwise to work off it or an external drive. You want backups of your valued photos.
    I don't think Bridge CS5 auto-imports Photos from SD cards, so you are safe there.
    Gene

  • [Consolidation-Locked] Nikon D600 NEF files in Lightroom 4

    Is there an update for Lightroom 4 to accept NEF RAW files for Nikon D600?
    Message title was edited by: Brett N

    Lightroom 4.2 has been released, which provides support for the Nikon D600. In Lightroom, go to Help > Check for Updates to download.
    Please see: http://forums.adobe.com/message/4785056

  • Still can't read Nikon D60 NEF Files with Camera RAW 4.4 updatel

    I've installed the Camera RAW 4.4 update with Elements 5.0.2, but I'm still unable to import files from the camera. Elements advises that files are damaged ...

    My problem was that while I had renamed the old file by changing the suffix to ".old", this was not enough. I subsequently created a new sub-folder "old" and moved the old file to this new location. I had already copied the new file to the correct location. Once the old file was gone from the active folder, all was OK.

  • Nikon D600 NEF Support

    Can PSE 9.0.3 be updated to read Nikon D600 NEF files?

    In a word, no. You have two alternatives:
    (1) Upgrade to PSE 11. (2) Download and install the free Adobe DNG converter to convert your NEF files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your original NEF’s as backups and for use in Nikon software)
    Windows download click here DNG Converter 7.2
    Mac download click here DNG Converter 7.2
    You can convert a whole folder of NEF images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • Nikon D600 Raw File compatibility

    When will LR4 be compatible with the new Nikon D600 raw files? I have LR4 now with CR 7.1 and it cannot read D600 raw files.

    Jao vdL I do not need to re-read Brett's post.   Michael Garnett asked how to convert his D600 NEF files to TIFF images, and I helped him with that.
    However, Lightroom 4.2 is still not the complete answer to native D600 NEF files, please read:-
    http://www.thephoblographer.com/2012/10/03/lightroom-4-2-is-out-now-with-preliminary-suppo rt-for-the-nikon-d600/
    Lightroom 4.2 has only preliminary support at the moment and the statement marked with an asterisk i.e :-
    * Please note that the support for Nikon D600 is preliminary and there is a minor risk that the appearance of your images may change when the final support for Nikon D600 is available in an upcoming release.
    Nikon D600 owners are still waiting for the final release from Adobe for full and complete D600 NEF file support.

Maybe you are looking for

  • Headless Mac Mini & Screen Sharing Latency

    I've seen serveral topics wthin the forums and others online.  I've seen physical fixes with the hacked VGA connector.  I'm going nuts here, because it appears the issue is software related. All my machines are Maverick with the exception of my Pro,

  • Enhancement for BGM1 Transaction

    Hi Friends, I have a reqirement to add a new column in the BGM1 transaction -> Item Screen -> Services Tab ,            in-between SORTID and INCL/EXCL. I have checked all the User-exits, Customer exits and BADI's available for the transaction but co

  • Restart my Forms and Report Services

    Hello and thanks in advance I can restart my HTTP_Server or OC4J_BI_Forms(process-type ) opmnctl restartproc process-type= But how can i restart my Forms and Report Services from command line. my reports server is: rep_tethis_ora_midtier thanks

  • HTMLLoader loading local content (SWF files) problem

    Hello guys, I'm just finishing my application but I facing a problem. I'm currently developing a desktop application using AIR. I'm using HTMLLoader to load local SWF files when te user tries to access specific content on the application. I successfu

  • Ip filter doesn't work

    Hi I am using SunOS 5.10 Generic sun4u sparc SUNW,Sun-Fire-V240 I have two NIC, which was connect to two ISP. sh-shuihu# ifconfig -a bge2: flags=1000843 mtu 1500 index 4 inet 192.168.1.10 netmask ffffff00 broadcast 192.168.1.255 ether 0:14:4f:5a:f4:a