How to read open loop status on cFP-AO-200

How to read open loop status on cFP-AO-200, i need to know which channels are open loop.
Brad Whaley
LabVIEW Certified Engineer

If you are reading a multiple channel tag and one or more channels is(are) in an Open Loop condition, then you will receive a warning from the FP Read or FP Write. However, this warning simply tells you that one or more channels has reported an Open Loop condition. If you need to figure out which channel is specifically reporting the Open Loop condition, you have to read/write each channel individually to get the channel status for a particular channel.
Regards,
Aaron

Similar Messages

How to Read a checkbox status from Controller

Hi All,
How can I read the checkbox status from the controller!.
Note: I am using crm_ic tags
Thanks, Sudeep..

thanks.

How to read/open Adobe Photoshop CS3 Prefs.psp

In which Programming language Adobe Photoshop CS3 Prefs.psp are written?
Extend Toolscript wont open and in text edit is just cryptic hireoglyphs.
Thans in advance!

I for one have a totally legitimate reason for editing a PSP file. We have deployed CS3 to thousands of nodes across our campus, and the behavior of the scratch disk just made my jaw drop in horror (not to mention the sporadic way the PSP file is created and modified). NONE of our users (except admins) have access to the root of the C:\, yet it will only write to the root of a partition! I have found that the setting is stored in a PSP file, and I am in the middle of writing a 50+ (and growing) line VBScript to essentially create an X:\ to point to C:\temp and change the setting in the PSP file. However, I cannot figure out how this file works. The setting that points the scratch disk to C:\ does not exist in the file unless I have had PS open for a period of time.
Adobe's biggest customers are institutions like ours and I cannot believe this issue went over Adobe's head in testing and QA.
I did however, get a kick out of the dozens of instances of the string "loob".

How to read open customer items from Archive system i.e BSID & BSAD tables

Hi,
We have a requirement to get the customer line items data that were open as of key date from archive system and present it as customer aging through a custon report. Example,in SAP R/3 we have data for last 3 yrs and beyod that the data is in archive system. Based on teh Key date, we need to got o archive system get the customer open items i.e from BSID & BSAD tables.
If you anyone has already dealt with this kind of requirement, please help me out with directions like simple way to ge the data. There is a standard report FBL5N with the option to choose datasources as , Database or archive system which used the logical database DDF.
Regards,
Abhi

- First take a look at the [Archive Development Kit (BC-CCM-ADK)|http://help.sap.com/SAPHELP_NW04S/helpdata/en/2a/fa0391493111d182b70000e829fbfe/content.htm] and for coding sample at [Archiving Class|http://help.sap.com/SAPHELP_NW04S/helpdata/en/2a/fa03f9493111d182b70000e829fbfe/frameset.htm] and report BC_SFLIGHT_READ_DB_AR_BY_INDEX.
- Look also at archive object FI_DOCUMNT via transaction AOBJ.
Regards,
Raymond

How can i open file from adobe reader..i already have adobe read

how can i open file from adobe reader..i already have adobe reader installed and cannot open a
file and i cannot convert my file into pdf..

Is the file really a PDF? Where is it? Have you tried opening it from within Reader?

Why is my macbook pro running slow. It runs slow even if only one app is open, especially if it's a browser. I don't know how to read Etrecheck, but was hoping someone who does can help me out. Would be super grateful. :-)

Hi. This is my first time posting. My Macbook Pro with Os X Mavericks has been running super slow since before I installed Mavericks so I'm pretty sure it's not the OS that has the problem. It runs slow even if only one app is open, especially if it's a browser, particulary google chrome. If mail is open...forget about it, down to a crawl. I don't know how to read Etrecheck, but was hoping someone who does can help me out. Would be super grateful. :-)
P.S. - Also, it sounds like something is loose inside my mac. How should I proceed?
Thanks in advance.
Hardware Information:
          MacBook Pro (13-inch, Late 2011)
          MacBook Pro - model: MacBookPro8,1
          1 2.8 GHz Intel Core i7 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
          OS X 10.9.2 (13C1021) - Uptime: 0 days 23:21:37
Disk Information:
          APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 749.3 GB (603.2 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Computer, Inc. IR Receiver
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Gatekeeper:
          Mac App Store and identified developers
Kernel Extensions:
          [not loaded] com.leapfrog.driver.LfConnectDriver (1.8.0 - SDK 10.7) Support
          [not loaded] com.seagate.driver.PowSecDriverCore (5.0.1) Support
          [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) Support
          [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) Support
          [not loaded] com.seagate.driver.SeagateDriveIcons (5.0.1) Support
Problem System Launch Daemons:
          [failed] com.apple.wdhelper.plist
Problem System Launch Agents:
          [loaded] com.paragon.NTFS.auth.plist Support
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist Support
          [loaded] com.google.keystone.daemon.plist Support
          [loaded] com.leapfrog.connect.shell.plist Support
          [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
          [loaded] com.microsoft.office.licensing.helper.plist Support
          [running] com.sophos.autoupdate.plist Support
          [running] com.sophos.intercheck.plist Support
          [running] com.sophos.notification.plist Support
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist Support
          [loaded] com.google.keystone.agent.plist Support
          [running] com.seagate.SeagateStorageGauge.plist Support
          [running] com.sophos.uiserver.plist Support
          [running] org.chromium.chromoting.plist Support
User Launch Agents:
          [loaded] com.adobe.AAM.Updater-1.0.plist Support
          [loaded] com.adobe.ARM.[...].plist Support
          [failed] com.adobe.ARM.[...].plist Support
          [loaded] com.facebook.videochat.[redacted].plist Support
          [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
          [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
          [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
User Login Items:
          Activity Monitor
          Dropbox
          Google Drive
          younity
          EvernoteHelper
Internet Plug-ins:
          o1dbrowserplugin: Version: 5.2.4.18058 Support
          nplastpass: Version: 2.5.5 Support
          Default Browser: Version: 537 - SDK 10.9
          AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
          FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
          Silverlight: Version: 5.1.20125.0 - SDK 10.6 Support
          Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
          QuickTime Plugin: Version: 7.7.3
          googletalkbrowserplugin: Version: 5.2.4.18058 Support
          SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
          AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
          JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
          Slick Savings: Version: 1.0
          Slick Savings: Version: 1.0
          Surfon: Version: 1.2.2
          Pearltrees Extension: Version: 6.0.13
          Mindomo Bookmarks: Version: 1.0
          Ebay Shopping Assistant: Version: 1.1
          Zootool: Version: 0.7
          Amazon Shopping Assistant: Version: 1.1
          Pocket: Version: 1.7.1
          Searchme: Version: 1.3
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User iTunes Plug-ins:
          TuneUp Visualizer: Version: 2.4.0 - SDK 10.6 Support
User Internet Plug-ins:
          Picasa: Version: 1.0 - SDK 10.4 Support
3rd Party Preference Panes:
          remoting_host_prefpane Support
          Flash Player Support
          Paragon NTFS for Mac ® OS X Support
Time Machine:
          Mobile backups: ON
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 697.84 GB Disk used: 136.06 GB
          Destinations:
                    NO NAME [Local] (Last used)
                    Total size: 3.41 GB
                    Total number of backups: (null)
                    Size of backup disk: Too small
                              Backup size 3.41 GB < (Disk used 136.06 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               6%          Activity Monitor
               5%          WindowServer
               1%          InterCheck
               1%          sysmond
               0%          ocspd
Top Processes by Memory:
          152 MB          Finder
          115 MB          HelpViewer
          111 MB          mds_stores
          86 MB          InterCheck
          57 MB          WindowServer
Virtual Memory Information:
          983 MB          Free RAM
          1.03 GB          Active RAM
          584 MB          Inactive RAM
          1.01 GB          Wired RAM
          17.41 GB          Page-ins
          222 MB          Page-outs

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

I have a regular generic computer, i have dowloaded itunes store and have books, how do i open the things to read them? if i cant how do i return them all and get my money back?

i have a regular computer, never use apple.....have dowloaded itunes store and have bought books, how do i open them?
if i cant how do i get my money refunded and sent back to me, i cant get anyone from customer services.
one of the worst sites i've ever been on.

-> http://www.apple.com/support/itunes/contact/

How to read the status changed in crmd_order txn before saving it to DB.

hello all,
My requirement is to perform some checks after the user changes the status
( Before saving it to DB i need to do some checks )
I could find the BADI and Fm's for checking conditions.
My question is i need to check for a particular status change how do i trace that that particular status which i need to capture has been changed??
i could see some FM's but it is only fetching the staus save in DB.
how do i trace the status just after user changes before saving it to DB.
it's an urgent requirement............pls help me on this..........
pls get back to me if u want more details.........
Thanks,
Shiva.

Hello.
Have you figured this out yet? We are having the same problem.

Hi experts, how to use open sql to read data from one " maintenance view"?

i want to use this part of data within report ,so how to use open sql statement to read data from one " maintenance view"?

Hi
You can't use OPEN SQl statements to fetch data from maintenance view
You have to use only Database views
see the different types of views and the difference
The followings are different types of views:
- Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
- Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
- Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
Reward points for useful Answers
Regards
Anji

I have Reader ver 9.0. If I receive a file which is created in ver 8.00, how can I open it ver 9.0 ?

I have Reader ver 9.0. If I receive a file which is created in ver 8.00, how can I open it ver 9.0 ?

All Adobe Reader versions are backwards compatible, so you should be able to open Acrobat 8 and earlier documents with Reader 9.
Do you have a specific problem with a document and Reader 9? If so, please give more details.

How to read file header/open filein binary mode

i am using FileConnenction API to read from a file. how can i open a file in binary mode so that i can read file header. In other words i want to open a file in binary mode.

You can always try looking at the [Header Signatures|http://www.techpathways.com/uploads/headersig.txt]. But it would probably be easier to adjust your application so it doesn't have to guess.
~

How do I read/open an external hard drive after using time machine?

I have an external Seagate HD that I used to back up files using Time Machine. How do I now read/open/view the Seagate External Hard Drive to see all that was saved for example documents, photos etc?

probe_droid wrote:
TimeMachine does an exact copy of the hardrive that you backed-up.
Not exactly, but close. It doesn't duplicate files and folders that haven't changed. It creates hard links to the originals so that it looks as if they are in the current dated folders, but they really aren't. I think this even throws off the Finder, sometimes. That's why digging through the Time Machine backup via the Finder is not a good idea and will likely cause more consternation.
Pondini has a nice FAQ and troublshooting site devoted to Time Machine. It is well worth everyone's time to take a look at what he has compiled. On the troubleshooting page are links to some tools that will allow you to peek into the backup and see what has or hasn't been backed up.

How can I open McAfee encrypted (EEFF) PDF files with Adobe Reader?

How can I open McAfee encrypted (EEFF) PDF files with Adobe Reader? Get error "There was an error opening this document. Access denied". Disabling Protected Mode in Reader doesn’t always work.
McAfee: https://kc.mcafee.com/corporate/index?page=content&id=KB74299&actp=search&viewlocale=en_US &searchid=1240943327683

If Reader ISN'T in the list of prpgrams to open with, click "Browse"
In the "Browse window" go to C/Program files [or Program Files (x86)]/Adobe/Reader 11/Reader
Select "AcroRd32.exe" and click "Open"
Make sure "Always use the selected program to open this kind of file" is checked and click "OK".

How do I open a PDF file with Adobe Reader if it is in iBooks

I have a number of PDF files in my iBooks library. I just downloaded Adobe Reader for the iPad. I can't see how I can open those PDF files. The only thing I seem to be able to do with them is to open them from iBooks directly. Doing that does not provide me with the features that Adobe Reader would provide (such as searching for particular text, etc.).

Use iTunes to save the PDF FROM iBooks, and to add them to Adobe Reader.
Connect your iPad to your computer. Bring up iTunes on your computer.
To save a PDF FROM iBooks, click on "Books" in the Library section on the left. Select the PDF you want to save and right-click and choose Show in Finder (Show in Explorer in Windows). Go up one level in your computer hierarchy and you'll see all the "Books" (PDFs and eBooks) in iBooks. You can leave them here if you want to view the PDFs in iBooks in the future, or drag them to the Desktop.
To move the PDF TO Adobe Reader:
Return to iTunes. Click on the iPad on the left in Devices. Click on the Apps tab. Scroll down the the File Sharing section as shown below. Click on Adobe Reader. Click the Add button and select the PDFs you identified in the previous step. They'll be added to Adobe Reader

How do I open a web page in Adobe Reader from ipad2? I don't see any buttons to click. I'm new user

How do I open a web page in Adobe Reader? I got the app for ipad2, but when a page says I need a certain version of AR, I don't know what to do. I'm a new user and don't know if I have to "open" AR and it automatically reads whatever doc I have up on the web, or is it always running and any web page I'm on should show a button to click in order to open the page in AR?

If a website says that you need a certain version of Adobe Reader, it is probably attempting to detect whether or not you have the Adobe Reader browser plugin installed. This is something that only works on desktop systems where browser plugins exist. Since browser plugins don't exist on mobile, website developers should take care to present different messages and provide different options for downloading PDF's when visited by mobile browsers. I recommend contacting the website owner and requesting that they implement access for mobile devices.

How to read open loop status on cFP-AO-200

Similar Messages

Maybe you are looking for