How to read out NB temperature?

Does the P965 Platinum have a Northbridge temp sensor? Im asking because DualCoreCell doesnt read out anything for the NB.
Another question, is it normal that the NB heatsink gets extremely hot? Mine gets so hot, I cant even touch it for two seconds without burning my finger, literally. And thats @ stock speeds and voltages. I do have a fan blowing onto the NB, but that doesnt seem to help.

Quote from: DTU_XaVier on 22-October-06, 06:06:17
BIOS reports a system temp, though I dunno if that's that...
On the mobo temp thing, you're not alone... Mine also gets very hot, too hot I'd say normally... Dunno why though, at stock volts...
Best Regards
Ah okay, so Im not the only one then. System temp is not the NB temperature, its the ambient temperature.
The 865PE Neo2 I had didnt have an NB temp sensor, the K8N Diamond also didnt have one... why does MSI never have these on their boards? Asus, Abit and even Gigabyte have them. >:(

Similar Messages

How to read out and modify text parts in a pdf-document?

Hello,
My problem is the following: I want to read out text passages of an existing pdf-file, compare them with files in an odbc-database and write down the results of that comparison in the same pdf-file. The term is: Read out a number in the file, search the database for the matching user-name, generate a field in the pdf and write down the search results in that.
i have read that this could be possible with acrobat...my version is an acrobat 9 pro extended...
could someone please tell me how to do that?
big thanks

As the definition of “color” vs. “black and white” differ by context – there aren’t any that I am aware of.
You can, however, use the Preflight feature built into Acrobat to identify whatever you wish…

How to read out a InputStream from a socket?

Hei,
I try to write a programm that should also be accessed via telnet. So I wrote a classe that has a ServerSocket, a Socket, an InputStream and an OutputStream.
I read out the InputStream via a byte arry, but the inputStream always starts with the first line I entered. How do I empty the Stream? Mark is not supported :(
So what can I do, to get only the last enty?
big thx,

use the other read option, see:[url http://java.sun.com/j2se/1.4.2/docs/api/java/io/InputStream.html#read()]InputStream#read
This allows you to read from an offset.

How to read out data via usb

Hello,
i am trying to get the measurements of a dial indicator, "MarCator 1075", product of Mahr Co. via USB-Cable.
I installed all the drivers and MAX shows that its a COM-Device and its working properly. So i configured the settings: baud rate 4800, data bits 7, parity even, stop bits 2, apllied and saved the changes.
I tried those 2 attached VI's, but it doesnt work.
1. basic_serial_write_and_read.vi is the standard VI for USB-communication of NI.
2. Sylvac Read.vi is a VI the vendor send after i talked to him to inform me about the dial indicator. He said its a VI to get Data via RS232, but the problem is that i dont have a RS232-slot in my computer. In order to that i have to realize it via USB.
I think it doesnt work because there are no databits to be read out. When the dataflow arrives the "VISA-Read" theres is an error. This occures in both VI's.
Error -1073807339 occurred at VISA basic_serial_write_and_read.vi
Possible reason(s): VISA: (Hex 0xBFFF0015) Timeout expired before operation completed.
Anyone who can help me with my issue??
thx in advance
best regards
Attachments:
basic_serial_write_and_read.vi ‏34 KB
Sylvac Read.vi ‏22 KB

Hello FCHansa,
have you installed the proper drivers?
Which version of LabVIEW are you using?
Which OS are you working on?
In the LabVIEW Example Finder you have a simple example how you can communicate to a USB HW via NI-VISA.
It's called "Basic TCPIP or USB VISA Write and Read - PDA.lvproj". Or another would be "Basic TCPIP or USB VISA Write and Read - Touch Panel.lvproj"
Have you configured your USB Device to a virtual COM interface?
Also please have a look to these links:
What is the Difference Between USB Raw Control and USB Raw Bulk?
http://digital.ni.com/public.nsf/allkb/400D6EAB5CFE1C6B86257395005F5D48?OpenDocument
USB RAW Controller
https://decibel.ni.com/content/docs/DOC-2022
Also, please follow the advises of smercurio_fc! As he said you need to know to which commands your Hardware is responding to.
Best regards,
Abduelkerim
Sales
NI Germany

How to read a continuous temperature signal from a Pyrometer via RS-232

I'm trying to read and graph a continuous signal from a Pyrofiber Lab pyrometer which is coming in through an RS-232 cable. As far as I can tell there are no device drivers for this instrument (or any other pyrometers).
If I have the pyrometer take single measurements I can get those into LabView using the Instrument I/O Assistant, but only as an ABC string reading " 'emmisivity value' 'temperature' 'corrected temperature'" and not as individual numbers or data that I can use/graph. If I have the pyrometer in High Speed Transmit mode (which is the mode I need it in), I can't read the signal at all. How can I get LabView to continuously read (and record or graph) the incoming signal? And is there some way to parse the signal when it comes in as a string with " 'time' 'emissivity' 'temperature' 'corrected temperature'"?
I'm very new to LabView (and programming in general), so any hints on a good starting point would be appreciated.
Solved!
Go to Solution.

progers - There is not a specific solution, as there is not a device driver for this device (assuming you are also using a pyrometer).
There are serial communication examples in LabVIEW, by going to Help >> Find Examples >> Hardware Input and Output >> Serial.
You will need the programmer's manual for the device to know what serial commands to use to talk to the device (see Dennis's post above).
Best Regards,
K. Anderson
Applications Engineer
National Instruments

How to read out the scale values of an intensity graph?

My aim is to read OUT the scale ranges (Max and min values DISPLAYED) of an intensity graph.
I want to do a scan of an area, display the result in the graph, graphically zoom in on something interesting and then use the zoom coordinates to define the area for the next scan.
Is that possible, and how?
If impossible, is there a work-around?
Solved!
Go to Solution.

Use the "XScale.Range" and "YScale.Range" property nodes.
www.movimed.com - Custom Imaging Solutions
Attachments:
Scale Ranges.vi ‏13 KB

How to read out a RPM signal in labview using UMI 7764 and PCI 7330

Hi
I have a problem getting a encoder signal into a labview program. The encoder is connected to a UMI 7764 motion device. This device is connected to a PC trough a PCI 7330. I heard rumors that I can't have more than two axis on a PCI 7330. But can I have more than 2 encoders on it?
The big problem is that I am new to the motion system and I don't know where to begin.
I'm going to finish a uncompleted system, but when I look at the VI, I get nervous. So you are my last hope.
I have taken screen captures of the VI and uploaded it.
My task is to implement a new encoder signal to the already-made VI.
Question is:
How do I add and read out a RPM signal from a new encoder?
VI download:
http://www.mediafire.com/?k1ckbozeppffv1z
Best regards
Henrik Myhre

From your post it seems like you wants to read back the RPM value of a particular move based on your encoder. There actually is a specific VI that you can use that does exactly this. The Read Velocity in RPM.VI should output the RPM of the current move that you are doing.
In the code that you posted, it looks like you are performing a two axis move. Therefore you will need two instances of this VI, one for each axis. You should utilize these VIs within the while loop and after the move has been started that way the RPM values are continuously updated.
It also seems like you have inherited some code that looks very complicated. We would highly recommend that the you begins experimenting with basic motion to get familiar with it.

How to read out License Keys of Windows Software on Macs?

Hi everyone,
good day to you all, i doubt that this question really fits into this Topic perfectly but i didn't know where else to post it. I hope that you can help me out with this, i have a problem that i have a number of Macs ranging from Minis to various Books, most of these are fittet out with MS Office Licenses (2004 & 2008) which i all have stored in a locker here but unfortunately some of the Licenses werent labeled and now i don't know how to find out which licence is istalled on which Mac? Do you know of any Software (or any other Solution other then deinstallling all and then reinstalling all ) that would help me out with this?
Lots of thanks in advance for your help and best wishes from here,
D. from Munich

i didn't know where else to post it.
Microsoft's own forums for their Mac products: http://www.officeformac.com/productforums

How to read out message cycle time from Vector CANdb file?

Hello LabVIEW friends,
I tried to open a Vector CAN Database (*.dbc) using the NI-CAN 2.3.2 Channel API and read out the cycle time of a message.
The CAN get property.vi should provide the sample rate which is described as followed:
Input parameter of the CAN Init Start function.
The sample rate specifies
whether to transfer data in a periodic or event-driven manner.
For periodic
behavior, the rate specifies the number of read/write samples to perform per
second.
But for all messages in my database I get the value 0.
When I connect a sample rate to the CAN Initialize.vi I will get it's value.
Could anybody help?
Thank You.
Greets,
Marcus

Hi,
unfortunately there is no way to use the cycle time property from your DBC file, because the NI driver is not able to read this information.
This is because the cycletime is stored in different places for different users and only Vector itself can read this information back.
In your case, you have to figure out this information by yourself and you can use the sample rate input of the init or initstart function to configure the cycle time in Hz.
If you need different cycle times for different messages, see the attached example.
DirkW
Attachments:
CAN_Multi-Chans_Diff-Period.vi ‏26 KB

How to read the CPU temperatures of a RT PC [LabVIEW RT]

Hi,
I am programming a stand-alone RT application with LabVIEW RT that runs on a regular PC.
I would like to monitor the different system temperatures (CPU,...) and if possible the fans speed.
I found an example that performs this task for PXI systems but not for regular PC.
Does anybody know if this is possible and how I can do it?
Thanks

Here is a solution that reads the temperature via a VBS script. The script uses WMI to access the Temp.
Saved as LV 8.0
Robert 'Red' Hoar
Staff Systems Engineer
Certified LabView Developer
www.vi-tech.com
(972) 233-1950 x 208
[email protected]
(Cell) (817) 312-5413 (Fax) (972) 233-1550
Message Edited by srhoar on 05-15-2008 11:34 AM
Attachments:
Read CPUTemp with vbs script 1.zip ‏17 KB

Status-byte of HP4194: How to read out?

Hi all,
I would like to know when my instrument (HP4194) has finished the
actual measurement sweep, so that Labview (v5.0.1) can use the whole
aquired data set etc. I found in the instruments handbook some notes
about the status-byte: By default, all bits of this byte are masked,
therefore first I have to send the RQSx command, where x is a number
between 0 and 255, indicating the non-masked bits. One of these bits
(bit 1) is described as "sweep complete", so it would be fine to now its
value. But how??? Further, I found that there has do be sent a serial
poll, but when I tried to send it (with the pre-defined GPIB-Serial-Poll
command), I always get errors. Has anyone experience in using the status
byte and knows the co
rrect commands to send to my instrument?
Thanks a lot,
Rafael

Hi,
The IEEE 488.2 standard specifies a status byte model that the bus controller can use to determine the state of the instrument.
The only mechanism instruments have to notify the controller of any condition is using Service Requests (asserting the SRQ line of the GPIB bus). There's only one SRQ line on the GPIB bus. When the line is asserted, the controller has to ask the status of each instrument to determine which one issued the service request. The process is calles serial polling. When the controller conducts a serial poll, it reads the status byte of the instrument. According to the IEEE 488.2 standard, if bit 6 (0x40) is set, the instrument is requesting service. Each bit in the Status byte represents an instrument condition. Bits 4, 5 and 6 are d
efined by the IEEE 488.2 standard. The rest are instrument specific.
The IEEE 488.2 status byte model defines a method to configure the conditions that makes an instrument generate a service request. The Service Request Enable (SRE) Register masks the Status byte. When a bit is set in the SRE, that condition will generate a service request.
For example, if you're instrument manual specifies that bit 2 of the Status byte is sweep complete condition, then you can send the instrument *SRE 0x01 to unmask bit 2.
The following tutorial has detailed information:
http://zone.ni.com/devzone/conceptd.nsf/2d17d611efb58b22862567a9006ffe76/cf4fcc64d7ae6918062569df00630630?OpenDocument#4
This is not specific to NI or you're instrument. It is part of the IEEE 488.2 standard. You can probably find more info on the web.
DiegoF

How can I read out metadata for captions from a Canon photo

I have to tried to find an answer via Adobe and Google. Still not able to figure out on how to read out XMP metadata for captions out of my photos. Checking the XMP data in InDesign shows info on Camera Make, Exposure etc. But if I use metadata fields from "Caption Setup" like "Camera" the caption shows <No data from link>. Fields where the XMP field name matches (e.g. "Lens") are ok. I need following fields for the caption: Camera Make, Exposure (aperture and speed) and ISO.

Lets keep it simple then.
If I take my utf file generated and open and view it in notepad I can see the accented characters. But if I open it in Wordpad , the accented characetrs are corrupted.
If I then save the file specifiying type Ascii, then the characters are written out correctly.
What I want to do is to be able to write out the file in ascii format without having to open it in utf-mode and then having to save it in ascii.
Ie I want the file to be opened in ascii format
All the characters to be written in Ascii format
But the source is still a unicode database.
I have gone through using convert and characters get lost. In fact, at this stage, I'm not sure its possible to do What I need to do.
Remember I am using an 8 bit character set which is why I have values above 127.
So basically if you take the word 'Annulé'
if I view it in wordpad it displays as
AnnulÃ©
But if I view it in notepad it displays as
'Annulé' which is because notepad detects that the file has a utf-8 character in it.
When I save it as type ascii I can then open it correctly in wordpad.
So I basically want to open this file in Wordpad and have it display Annulé rather than the garbled characters,
without having to go through the process of opening and saving the file as type ansi.

LOBs reading out from iFS internal tables

Hi, does anybody know how to read out the files which are stored in the database with iFS ? I would like to parse the files and put a couple of information out into an other table.

Bernd, this is not a supported feature, and therefore is not documented. All access to iFS data should be through the iFS tools, Java APIs or the provided database Views (which do not include access to the LOBs).
Why couldn't you use a protocol, such as FTP, or a java program to do what you want to do?

Read out Novell NDS Userdata

Hi,
anybody knows how to read out the actual username / userdata from a netware client?
thanks

JNI, (Java Native Interface), may help. Tutorials available on this site. Or if there's a COM wrapper to the dll you could use the Java-COM bride, (or Corba if you've got the implementation).
Ugly idea: Write a batch file that can get the info that you want, use Runtime.exec() to fire it from within your code. Don't do this. Well, maybe if all else fails.

Why is my macbook pro running slow. It runs slow even if only one app is open, especially if it's a browser. I don't know how to read Etrecheck, but was hoping someone who does can help me out. Would be super grateful. :-)

Hi. This is my first time posting. My Macbook Pro with Os X Mavericks has been running super slow since before I installed Mavericks so I'm pretty sure it's not the OS that has the problem. It runs slow even if only one app is open, especially if it's a browser, particulary google chrome. If mail is open...forget about it, down to a crawl. I don't know how to read Etrecheck, but was hoping someone who does can help me out. Would be super grateful. :-)
P.S. - Also, it sounds like something is loose inside my mac. How should I proceed?
Thanks in advance.
Hardware Information:
          MacBook Pro (13-inch, Late 2011)
          MacBook Pro - model: MacBookPro8,1
          1 2.8 GHz Intel Core i7 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
          OS X 10.9.2 (13C1021) - Uptime: 0 days 23:21:37
Disk Information:
          APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 749.3 GB (603.2 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Computer, Inc. IR Receiver
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Gatekeeper:
          Mac App Store and identified developers
Kernel Extensions:
          [not loaded] com.leapfrog.driver.LfConnectDriver (1.8.0 - SDK 10.7) Support
          [not loaded] com.seagate.driver.PowSecDriverCore (5.0.1) Support
          [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) Support
          [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) Support
          [not loaded] com.seagate.driver.SeagateDriveIcons (5.0.1) Support
Problem System Launch Daemons:
          [failed] com.apple.wdhelper.plist
Problem System Launch Agents:
          [loaded] com.paragon.NTFS.auth.plist Support
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist Support
          [loaded] com.google.keystone.daemon.plist Support
          [loaded] com.leapfrog.connect.shell.plist Support
          [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
          [loaded] com.microsoft.office.licensing.helper.plist Support
          [running] com.sophos.autoupdate.plist Support
          [running] com.sophos.intercheck.plist Support
          [running] com.sophos.notification.plist Support
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist Support
          [loaded] com.google.keystone.agent.plist Support
          [running] com.seagate.SeagateStorageGauge.plist Support
          [running] com.sophos.uiserver.plist Support
          [running] org.chromium.chromoting.plist Support
User Launch Agents:
          [loaded] com.adobe.AAM.Updater-1.0.plist Support
          [loaded] com.adobe.ARM.[...].plist Support
          [failed] com.adobe.ARM.[...].plist Support
          [loaded] com.facebook.videochat.[redacted].plist Support
          [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
          [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
          [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
User Login Items:
          Activity Monitor
          Dropbox
          Google Drive
          younity
          EvernoteHelper
Internet Plug-ins:
          o1dbrowserplugin: Version: 5.2.4.18058 Support
          nplastpass: Version: 2.5.5 Support
          Default Browser: Version: 537 - SDK 10.9
          AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
          FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
          Silverlight: Version: 5.1.20125.0 - SDK 10.6 Support
          Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
          QuickTime Plugin: Version: 7.7.3
          googletalkbrowserplugin: Version: 5.2.4.18058 Support
          SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
          AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
          JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
          Slick Savings: Version: 1.0
          Slick Savings: Version: 1.0
          Surfon: Version: 1.2.2
          Pearltrees Extension: Version: 6.0.13
          Mindomo Bookmarks: Version: 1.0
          Ebay Shopping Assistant: Version: 1.1
          Zootool: Version: 0.7
          Amazon Shopping Assistant: Version: 1.1
          Pocket: Version: 1.7.1
          Searchme: Version: 1.3
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User iTunes Plug-ins:
          TuneUp Visualizer: Version: 2.4.0 - SDK 10.6 Support
User Internet Plug-ins:
          Picasa: Version: 1.0 - SDK 10.4 Support
3rd Party Preference Panes:
          remoting_host_prefpane Support
          Flash Player Support
          Paragon NTFS for Mac ® OS X Support
Time Machine:
          Mobile backups: ON
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 697.84 GB Disk used: 136.06 GB
          Destinations:
                    NO NAME [Local] (Last used)
                    Total size: 3.41 GB
                    Total number of backups: (null)
                    Size of backup disk: Too small
                              Backup size 3.41 GB < (Disk used 136.06 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               6%          Activity Monitor
               5%          WindowServer
               1%          InterCheck
               1%          sysmond
               0%          ocspd
Top Processes by Memory:
          152 MB          Finder
          115 MB          HelpViewer
          111 MB          mds_stores
          86 MB          InterCheck
          57 MB          WindowServer
Virtual Memory Information:
          983 MB          Free RAM
          1.03 GB          Active RAM
          584 MB          Inactive RAM
          1.01 GB          Wired RAM
          17.41 GB          Page-ins
          222 MB          Page-outs

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

How to read out NB temperature?

Similar Messages

Maybe you are looking for