How to read profit center standard hierarchy Remote
Dear all,
Could anybody please tell me how to read the standard hierachy of profit centers
using RFC module(s) for a certain controlling area?
I found lots of classes and modules in the standard dialogs but nothing remote enabled :-(.
Thanks in advance,
Marcel
Hi Marcel,
It's due to the order of appearance; let's say you have the following:
Group1
Group11
Group111
Group112
Group12
Then, the table will show
Group1 0
Group11 1
Group111 2
Group112 2
Group12 1
So, the connection is defined: you know that Group 111 is assigned to Group11, because it's level is 2 and the first group above it with level 1 is Group11. The same is with values by the order of appearance as you know for each group the quantity of the values.
Regards,
Eli
Similar Messages
-
How to make changes to profit center standard hierarchy?
Hello!
I have to make changes in standard profit center hierarchy. Should I make the changes in IMG or Sap Easy access -screen? If I make changes in IMG, could you please tell me the right path where can I find it?
Another question, if some profit center is in the wrong place in stardard hierarchy and I want to transfer it to another place (under other node for example), how is this done? Should I delete this profit center first (I tried delete but it wasn't possible..) or can I just transfer the profit center?
Thanks!
Points will be given!=)Hi,
in the IMG you can maintain the profit center standard hierarchy via TA KCH4. The path is:
-> Controlling
-> Profit Center Accounting
-> Master Data
-> Maintain Standard Hierarchy
The transport of the profit center standard hierarchy is done via TA 0KEQ, (this is relevant for both KCH5N and KCH4).
IMG Path:
-> Controlling
-> Profit Center Accounting
-> Tools
-> Transport Customizing Settings
Hope I understood you correctly.
Regards
Karl -
Change a profit center Standard Hierarchy
Hello,
How do i change a standard hierarchy for profit centers which is already assigned in 0kE5.
Currently there are no transaction data in the system.However the profit centers are already assigned to the standard hierarchy ABC.
We now want to change the standard hierarchy to DEF.
Is this possible?
Thanks & Regards,
RajeshwariHello Murali,
Thanks for the Quick reply.
We did try using the transaction KCH4 and delete the profit centers/profit center groups assigned to it.
However we get the following message for the same:
This function is not allowed in the standard hierarchy
Message no. OH 040
Diagnosis
You are directly processing the standard hierarchy (cost centers, business processes). The following actions are invalid for individual values:
Inserting groups that already contain values
Removing/deleting groups that already contain values
You are processing the profit center standard hierarchy or any other alternative hierarchies that contain parts of the standard hierarchy. The following actions are then invalid for individual values:
Delete
Insert
Reassign (delete and insert)
Removing groups that already contain values
Inserting groups that already contain values
Procedure
Undo the change you wanted to make.
Hence we are unable to even remove the profit center groups within the group ABC.
Is there any other way?
Thanks & regards,
Rajeshwari -
Profit Center Standard Hierarchy in Production Server
Dear All
I have done Controlling Area Settings for Profit Centers via TCode: 0KE5. I have made Profit Center Standard Hierarchy in Development server. The same Standard hierarchy is available in Quality sever but it is unavaliable in Production server.
Please guide me.
Thanks & Regards
KanwaljitHi,
You should check if the transport with the relevant configuration has passed to Produciton. Anyway, you can create new one via 0KEQ transaction.
Regards,
Eli -
Profit center Standard Hierarchy
Hello Gurus
I Defined the Profit center group in KCH1 but i can not able to Define the standard hierarchy in KCH4 when i was define the standard hierarchy while system shows some message
This function is not allowed in the standard hierarchy
Message no. OH040
can anybody give the Valuable inputs my issue my client year ending process is going on
Regards
venkatHi,
Via KCH1 you create alternative profit centre groups. If you want to define standard hierarchy, you have to create it in KCH4 (or 0KE5).
Regards,
Eli -
Transport cost center standard hierarchy & profit center herarchy
Dear All,
Pls guide how to transport cost center standard hierarchy, cost center groups, profit center hierarchy and profit center groups from config client to production?
Regards
KomalHi,
For CO data go to OKE6 transaction and create a change request.
For PCA, go to 0KEQ and do the same.
Regards,
Eli -
Function module to find the top node in the Profit Center standard hierarch
Hi,
Please let me know the function modules/Tables to do the following.
1. To find the Top node in the Profit center standard hierarchy which is displayed via KCH6N Transaction.
2. To read/retrieve standard hierarchy displayed in KCH6N Transaction.
Thanks in Advance,
Madhuri.Hi Madhuri ,
have a look @<b>SETLEAF</b> or SET* in se11 , u can get the Top Node by putting the Logic like this
ex: i am searching for Top Node of A3
<b>select setname from setleaf where valfrom eq 'A3'.</b>and for that selected setname u have to do one more
loop.
<b>select setname from setleaf where valfrom eq 'A2'.</b>
then only u will net Node A1.
this is a sample code only , dont check F2.
let me know if u want more inputs of Set Ids.
regards
prabhu
[email protected]
NjoySAP -
What is the T-Code for creating Cost center - profit center standard hierar
Hi,
What is the T-Code for creating Cost center - profit center standard hierarchy.Please provide me the T-codes.
ThanksHi Supriya,
Create / Change Cost Center Standard Hierarchy - OKEON
Display Cost Center Standard Hierarchy - OKENN
Create Profit Center Standard Hierarchy - KCH1
Change Profit Center Standard Hierarchy - KCH5N
Display Profit Center Standard Hierarchy - KCH6N
Srikanth Munnaluri -
How to add profit center in fbl5n selection screen
how to add profit center in fbl5n selection screen
and
it is save to copy ddf from sap to cus
wll it affect anything elseWhen you are on selection screen of FBL5N, press (Shift + F4) DYNAMIC SELECTIONS, there you will see a Dynamic selection screen along with your normal FBL5N selection screen, you will find Profit Centre ther, if you don't find Profit Centre in Dynamic Selection Screen you can add the same from the list on the left, search for profit centre, place your cursor on Profit centre and press the Arrow Button(Copy Selected) on top of the list. Now you will find Prfit Centre in Dynamic selection screen, fill the field with values and press save, that's it.....
Reward points if useful, get back in case of query...
Cheers!!! -
Issue on profit center group and profit center group hierarchy
hi experts
I have a requirement where i have profit center,profit center group and profit center group hierarchy.
profit center group and profit center group hierarchy are same?if they are same how to get them into BI.if they are not same how to get them into BI
im using two datasources 2lis_11_vaitm and 2lis_12_vcitm,how to connect the profit center group and profit center group hierarchy with the datasources,My dataflow is on top of these datasources there are two write optimised dso and on top of those w-o dso there are std dso and on top of the std dso there is a infocube.on infocube there is multiprovider
Thanks,
sivaramHi Sivaram,
Profit Center would be an attribute of any object which is used in the 2lis datasources. maybe CO Order or WBS etc...from these objects Profit Center should be or could be made as navigational attribute.
Further you can load the master data and hierarchy from the datasource 0PROFIT_CTR_0106_HIER
Hope this helps.
Good Luck.
Vikram -
How to lock Profit Center in SAP B1 8.8 PL10
Hi All,
I am Using Profit cneter feature as Location for one of my client. Totally there are 12 locations( Profit centers). Now I got a situation where I need to lock few Locations (Profit Centers). Bcoz they are non Operative as of now.
Somebody please let me know how to lock profit center in SAP B1 8.8 PL 10.
Thank you,
Dasari.Try this for A/R Invoice:
if @object_type = N'13' and @transaction_type in (N'A', N'U')
BEGIN
If exists (Select T0.DocEntry From INV1 T0
Where T0.DocEntry=@list_of_cols_val_tab_del and T0.Project
in ('P1', 'P2'))
Begin
Set @error = 13
Set @error_message = 'Project Code inactive!'
End
END -
How to add 'profit center' under documents of dynamic selections in FBL5N
Dear Friends,
In fbl1n (vendor line item display) if i choose dynamic selection ..left side of the window consists of fields....under document ...'profit center' is there....
In fbl5n(customer line item display) for the same ,profit center is not there.....!!!
How to add 'profit center' into the available list in FBL5N
Regards,
Madhu..!!!Hi,
Do Ctrl + f8 (Change layout). In it u have profit center for FBL5n
Pls. assign points, if useful
Regards,
Sridevi -
How to update profit center in posted document without profit center ?
HI,
I want to know,
How to update profit center in posted document without profit center ?
So that i can get my profit center accouting report proper.
Thanks
NileshThere is a long story about profit center accounting. I assume you are using Classic PCA, this means you can see the PCA documents. And the solutions is below:
For P/L account, even you don't maintain cost element for it, if you maintain the profit center in the application (Frontend transaction), then PCA line items will be generated for this account.
For B/S account, if you maintain the default Profit Center with transaction 3KEH/3KEI, the PCA line items will generated for this account also.
Hints, don't maintain default profit center for AR/AP accounts, these accounts to be treated in periodic processing.
First, calculate the distribution/adjust by F.5D, then transfer it by 1KEK. for others account rather than AR/AP, use F.5E
For you case, if this account is P/L account, but you don't maintain profit center in the transaction, you can maintain default profit center as B/S account in 3KEH and 3KEI, then transfer it subsequently by transaction 1KE8.
Good Lucky!
Flex Yang -
hiiiii...
by which t.code we can see the profit center wise hierarchy?
Thanks & Regards
Rekha SharmaHI
KCH6N
Vijay -
How to add "profit Center" in Screen varaint of manual bank Statement.
Hi all,
Kindlt tell how to add "profit center" in possible filed of Screen varaint of manual bank statement.T-code OT43.
Rgds,
Alok SharmaHello,
Create a new variant
Put your cursor on possible fields.
Click on page down on your key board.
It will show all possible fields.
Double click on the profit center.
It will go to current field in your variant.
Hope this solves.
Regards,
Ravi
Maybe you are looking for
-
How to get sharepoint document library metadata details from sql?
I am creating a windows form application , in which user selects document library and after clicking on button I am creating an excel file which displays all document name with its metadata information. The select query which I am querying to SQL Ser
-
How do I get my catalog of images on lightroom 2 when it says assertion failed?
I am unable to get to my images in lightroom 2. It is telling me assertion failed. I need some assistance. I had no trouble with it yesterday. Someone was on my computer and they may have renamed a file. I need these images.
-
Help opening raw files in PSE 13
Hello, I upgraded PSE 13 from PSE 9. I was using PSE 9 with my Nikon 600 (because I couldn't open the 600 raw files in PSE 9) by using the Adobe DNG converter. This was working fine. Since upgrading I can't open any Nikon 600 raw files in PSE 13 nor
-
How can I Download Adobe Acrobat 7 Standard (needed due to a compatibility problem)?
How can I Download Adobe Acrobat 7 Standard (needed due to a compatibility problem)?
-
With webutil-client_host, send txt file to client printer
hi, I wanna to learn how to send a txt file to client default printer(local or network), I created txt file at client disk, and try to send printer directly, just try some statement looks like below; a.client_host('cmd /c start print C:\TEMP399899.tx