How to read qualifications an event?
Is there any function to read these results?
I need to read these results.
Help..!
Hi,
When using the change event with dropdowns, you can't use the .rawValue as this has not been set at the point of selection. Instead you would need to use xfa.event.newText.
I would recommend moving the script to the exit event, as this will work reliably with the .rawValue.
You can script to fire an event (execEvent), but that it not your problem here.
Good luck,
Niall
Assure Dynamics
Similar Messages
-
How to Read FPM Events in WDDOBEFOREACTION
Dear All,
I am working on a GAF solution. If the user clicks the PREV or EXIT buttons I want to skip the Check the mandatory field validations. But do not know how to read the FPM Events inside the WDDOBEFOREACTION method inside the View.
Any help is greatly appreciated.
Thank you.
PKHi,
Below code can be used to get the current executed FPM event.
DATA io_event type cl_fpm_event.
io_event = wdevent->get_string( 'ID' ).
io_event will have the Event which is being triggered.
FPM event can be captured in WDDOBEFOREACTION, but since this hook method is invoked before any events in the view, so it will throw a dump , if any action is triggered other FPM event.
So it is better to write the validation in Component controller method,(ON_PROCESS ), if we want to Validate based on prev and next buttons.
DATA io_event type cl_fpm_event.
CASE io_event->mv_event_id .
WHEN cl_fpm_event=>'NEXT'. " Global constants can be declared like gc_event_edit,etc
Endcase.
Regards,
Harsha J -
How do I delete an event on ical when there's no edit option, it reads details?
I'm trying to delete an event in iCal on my iPad but where it usually reads edit it reads details and in details theirs no delete option. How can I delete this event?
Is it an event that you added?
-
How to read shared variables inside event structure ?
Hi,
I have a problem that my shared variables do not update inside event structure. The program(s) I am trying to get working is seen in the attached screenshot. It works as follows:
0. I start the vi that is unsquared.
1. I write a string to a shared variable using vi in red square. I make sure that its updated using write-wait-read.
2. I run the other vi (blue square), this changes the boolean shared variable.
The unsquared vi has been running the whole time, it has event structure bind to boolean shared variable change (the one in blue vi). After I have runned the blue vi, the unsquared vi should change the indicator values to match the ones in red vi. However I have to start the blue vi multiple times to get it to change, sometimes even 6 times.
Also, when I change the value in red vi to a third value and start blue vi multiple times, the unsquared vi shows all the variables. I.e. I put "cat" to red then start red, put "mouse" to red then start red,... and then start clicking blue... Unsqured shows cat, mouse,..., dog (dog is the default).
How can I force the shared variable to update inside event sructure. I want the current value of the variable, not some historical values.
Attachments:
Screenshot-5.png 108 KBFound the buffering... disabling it solved the problem... thanks.
FYI, there is another solution that I just found out... attached. Adding timeout to the event structure and the variable read outside the event structure... This makes the shared variable strings (one that is read outside and the otherone that is read inside) different.
Could someone explain why the variables are in different state even if they are used in the same place and looped with 10ms intervals?
Juha
Attachments:
Screenshot-6.png 110 KB -
Hi frnds,
As, I'm beginner to performance tuning I dont know
What action do i need to take?
I mean how to read the output which I given below.
this is the output suffering buffer busy waits.
Could anyone please tell me
CLASS TOTAL_WAITS TOTAL_TIME
data block 93303 58711
unused 0 0
system undo header 12 232
undo header 7847 6636
3rd level bmb 0 0
save undo header 0 0
bitmap index block 0 0
file header block 0 0
free list 0 0
undo block 68 207
segment header 422 399
extent map 0 0
2nd level bmb 0 0
system undo block 0 0
sort block 0 0
save undo block 0 0
1st level bmb 1 17
bitmap block 0 0
Thanks, Muhammed Thameem. SHello,
"Buffer busy waits" is contention for a buffer (representing a specific
version of a database block) within the Buffer Cache. So, in essence
it is block contention and thus it is most likely something to do with
the design of the tables and indexes supporting the application. A
built-in bottleneck. On indexes, it could be the age-old problem of
insertions into an index on a column with a monotonically-ascending
data value (i.e. timestamps or sequence numbers) which tends to cause
contention on the highest leaf node of the index. On tables, it might
have to do with many concurrent insertions into a table in a
freelist-managed tablespace where the table has only one freelist. It
could also be due to a home-grown implementation of sequence-number
generators (i.e. small table with one row, one column in which contains
the "last value" of a sequence, etc) which lots of people use to avoid
not being "portable across databases" which they think means not using
Oracle sequences (yadda yadda yadda).
I'd look for any SQL statement in the "SQL sorted by Elapsed Time"
section of the AWR report which exhibits high elapsed time but
relatively low CPU time, indicating a lot of wait time. Of course,
there are something like 800 possible wait events in current releases
of Oracle, of which "buffer busy waits" is only one, so this is just
inference and not a direct causal connection to your problem. But,
once I find such statements I'd check to see if they are
accessing/manipulating tables within the CUBS_DATA tablespace, and then
use "select * from table(dbms_xplan.display_awr('sql-id'))" to
get the execution plan(s), and then look for something ineffective
within the execution plan. You might find the script "sqlhistory.sql" helpful
here as well, to get a "historical perspective" on the execution of the
SQL statements over time, in case the buffer busy waits peaked at some
point in the past
Please refer to:
http://www.pubbs.net/201003/oracle/51925-understanding-awr-buffer-waits.html
Also
http://www.remote-dba.net/oracle_10g_tuning/t_buffer_busy_waits.htm
kind regards
Mohamed -
How to read iCal events from SQLite Cache file?
I need to figure out how to read event entries in the Cache file stored in /Library/Calenders/ as my actual events have been corrupted due to a file system problem. The example below shows the information I have for each entry, where the event in the entry was Bon Jovi Concert, however I am confused how I can read the date and time of the event, information I believe is stored as 218215639,219613081,219524400,219540600. Any help is greatly appreciated.
INSERT INTO "ZCALENDARITEM" VALUES(0,NULL,0,NULL,0,5,NULL,6,4039,NULL,0,0,0,0,0,0,2,23,0,0,0,0,6,0,21821563 9,219613081,219524400,219540600,NULL,NULL,NULL,NULL,NULL,'local_AFB8D342-2DAE-4F A1-A9A6-3FA9B28B5C7C','Bon Jovi Concert',NULL,NULL,NULL,'Europe/London',NULL,'0E17BBB6-0E76-4024-8DD7-60E43D38D 35B');OK, here we go ... I hope. I have tried it on my iCal, with about 2000 entries, and it worked. I cannot guarantee that it will work for you.
Make a new text file from sql as before, but using this modified command to get additional data for each event:
sqlite3 Desktop/Hope 'select ZSTARTDATE, ZCALENDARITEM.ZTITLE, ZENDDATE, ZNODE.ZTITLE, ZISALLDAY, ZRECURRENCERULE, ZISDETACHED from ZCALENDARITEM inner join ZNODE on ZCALENDARITEM.ZCALENDAR = ZNODE.Z_PK where ZSTARTDATE not null' >hope.txt
I suggest you make a new user account, then copy the text file hope.txt and the script to the Public/Drop Box folder for that account. Log on to the new account and copy the two files from the drop box to the Desktop. Start iCal and make new calendars to match those in your ordinary account. Double click the script to open it in Script Editor and CHANGE THE DATE RANGE in the "set ThePeriod" line. Stand well back and click the run button. Every 50 records processed it will pop up a progress box, which will pop down again after a second. Go for lunch.
When it is finished see if things look OK in iCal. If they do export each of the calendars, copy them to the drop box of your normal account and return to your normal account to import them.
If there is an error make a note of the error message and line number, find that line in the text file, and post it here with a couple of lines either side.
Note that for recurring items iCal normally only makes a single event, the first occurrence, then uses a recurrence rule to calculate if the event should be displayed in the current window. If there are any recurring events in the period you have selected where the first occurrence is before the period they will not be recreated. Where however you have changed a single occurrence of a recurring event iCal makes a new, detached, event. Any of these in the period will be detected. If their original event was also in the period they will now appear in the iCal display as duplicates. For easy spotting of these, I have prefixed "XX-" to the title of any detached events.
AK
<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">on run
set ThePeriod to {date ("jan 1 2008"), date ("dec 31 2008")} --CHANGE THIS BEFORE RUNNIN
set TheFile to open for access (path to desktop as text) & "temp.txt"
set TheContents to read TheFile --until return
close TheFile
set TheLines to paragraphs of TheContents
set OldDelim to AppleScript's text item delimiters
set AppleScript's text item delimiters to {"|"}
set LCount to 0
set ACount to 0
set RCount to 0
set DCount to 0
set SCount to 0
set HowMany to (count of TheLines)
try
repeat with ThisLine in TheLines
if (count of ThisLine) is 0 then exit repeat
-- Start Date, Title, End Date, Calendar, All Day, Recurs, Detached
set LCount to LCount + 1
set Details to text items of ThisLine
set MyStartDate to FixMyDate(item 1 of Details)
set MyTitle to item 2 of Details
set MyEndDate to FixMyDate(item 3 of Details)
set MyCalendar to item 4 of Details
set MyAllDay to item 5 of Details
set MyRecurs to item 6 of Details
set MyDetached to item 7 of Details
if MyAllDay is "1" then set ACount to ACount + 1
if (count of MyRecurs) > 0 then set RCount to RCount + 1
if MyDetached is "1" then set MyTitle to "XX-" & MyTitle
if MyDetached is "1" then set DCount to DCount + 1
if (MyCalendar is not "Birthdays") and (MyStartDate ≥ item 1 of ThePeriod) and (MyStartDate ≤ item 2 of ThePeriod) then
tell application "iCal"
tell calendar MyCalendar
set ThisItem to make new event at end of events with properties {summary:MyTitle, start date:MyStartDate}
end tell
tell ThisItem
if MyAllDay is "1" then set allday event to true
if (count of MyRecurs) > 0 then set recurrence to MyRecurs
set end date to MyEndDate
end tell
end tell
else
set SCount to SCount + 1
end if
if (LCount mod 50) = 0 then
set the_message to "Processed " & (LCount as string) & " of " & (HowMany as string)
display dialog the_message buttons {"Cancel"} giving up after 1
end if
end repeat
on error TheError
display dialog "Error: " & TheError & " about line " & LCount
end try
set AppleScript's text item delimiters to OldDelim
display dialog (LCount as string) & " lines processed" & return & "All Day: " & (ACount as string) & return & "Recurs: " & (RCount as string) & return & "Detach: " & (DCount as string) & return & "Skipped: " & (SCount as string)
end run
on FixMyDate(MyDate)
date (do shell script "date -r " & MyDate & " -v+31y +%e'/'%m'/'%y' '%T")
end FixMyDate
</pre> -
In iCal how do i set an event every 3 months
In iCal how do i set an event every 3 months.
Sk8trdad,
I presume that your question relates to the Calendar App on the iPad.
You have to use the "repeat>Custom" setting on the Desktop version of iCal. -
How can I set an event to repeat on a week day rather than a numerical day of each month?
How can I set an event to repeat on a week day rather than a numerical day of each month? I see an option at the bottom of the repeat window .... but I cannot use it. Actually, when I try it freezes up my Calendar.
Lorrene Baum DavisThese scrrenshots are from Snow Leopard - I would think that Lion wouldn't be too much different.
-
How to read Excel file in flex
Hi,
I am new to Adobe flex and i dont know how to read Excel in flex and i need coding for that. So anybody help me...
thanks in advance...Hi
You can read and parse XLS files (only works with xls-files) with urlloader and a ZIP-lib that can read zip-files.
public function loadXLS(url:String):void
var urlLoader:URLLoader = new URLLoader();
urlLoader.dataFormat = URLLoaderDataFormat.BINARY;
urlLoader.addEventListener(Event.COMPLETE, onLoadComplete);
urlLoader.load(new URLRequest(url));
private function onLoadComplete(even:Event):void
urlLoader.removeEventListener(Event.COMPLETE, onLoadComplete);
model.sheetsDict = new Dictionary();
var zipFile:ZipFile = new ZipFile(urlLoader.data);
for(var i:int = 0; i < zipFile.entries.length; i++)
var entry:ZipEntry = zipFile.entries[i];
var data:ByteArray = zipFile.getInput(entry);
if(useFile(entry.name, "/sheet([^$]+)"))
model.sheetsDict[entry.name.split("xl/")[1]] = new XML(data.toString());
else if( useFile(entry.name, "/sharedStrings.xml") )
model.sharedStrings = new XML(data.toString());
else if( useFile(entry.name, "/workbook.xml$") )
model.workbook = new XML(data.toString());
else if( useFile(entry.name, "/workbook.xml.rels") )
model.rels = new XML(data.toString());
trace(model.sharedStrings)
to read the xml properly you have to use namespaces in the reader-class
namespace ns1 = "http://schemas.openxmlformats.org/spreadsheetml/2006/main";
use namespace ns1;
namespace ns2 = "http://schemas.openxmlformats.org/officeDocument/2006/relationships";
use namespace ns2;
namespace ns3 = "http://schemas.openxmlformats.org/markup-compatibility/2006";
use namespace ns3;
namespace ns4 = "urn:schemas-microsoft-com:mac:vml";
use namespace ns4;
namespace ns5 = "http://schemas.openxmlformats.org/package/2006/relationships";
use namespace ns5;
//Olof -
How do I create an Event Handler for an Execute SQL Task in SSIS if its result set is empty
So the precedence on my entire package executing is based on my first SELECT of my Table and an updatable column. If that SELECT results in an empty result set, how do I create an Event Handler to handle an empty result set?
A Newbie to SSIS.
I appreciate your review and am hopeful for a reply.
PSULionRPDepends upon what you want to do in the eventhandler. this is what you can do
Store the result set from the Select to a user variable.
Pass this user variable to a Script task.
In the Script task do whatever you want to do including failing the package this can be done by failing the script task, which in turns fails the package. something like
Dts.TaskResult = Dts.Results.Failure
Abhinav http://bishtabhinav.wordpress.com/ -
Read the bottom for updated information/amendments
Hi everyone,
S.M.A.R.T. is Self-Monitoring, Analysis and Reporting Technology.
[size=15]1. S.M.A.R.T. info websites[/size]
OK, now we all know what S.M.A.R.T. stands for. For more details about S.M.A.R.T., here is a comprehensive non-technical explanation about S.M.A.R.T. by pcguide.com. Maxtor has published a white paper on S.M.A.R.T. too. And this is from Seagate. Anyhow, I am not going to discuss whether S.M.A.R.T will protect your harddisk from failure, etc etc here. Let us focus more on S.M.A.R.T. itself.
[size=15]2. S.M.A.R.T. monitoring tools[/size]
S.M.A.R.T. data is stored as a tabulated data somewhere in the harddisk as registers. The tools below support reading these registers value from S.M.A.R.T. enabled harddisk.
1. SpeedFan *sign-up is required for download, but it's FREE
2. Active SMART
3. Sisoftware SANDRA 2002.6.8.97 SP1 , older version doesn't support
[size=15]3. S.M.A.R.T. Tabulated Information[/size]
Here is a screenshot captured with SpeedFan.
Let us go through the screenshot. As can be seen, there are 5 columns - Attribute, Value, Worst, Warn and Raw.
Attribute
describes the meaning of the values. As mentioned above, the SMART data is stored as a tabulated data as registers. Each attribute represents one register ID. eg Raw Read Error Rate is register ID 01, register ID 03 is Spin-up Time, etc.
Note that the register IDs are not displayed by SpeedFan, but are displayed by other SANDRA and Active SMART. I have no idea how many S.M.A.R.T. attributes are there, Active SMART stated it can detect more than 35 attributes!
However, some attributes are manufacturer specific. So possibly some attribute names as shown in these SMART tools might not represent the true meaning of the values too!!
Value
is the current relative value of the attribute read from the registers.
Worst
is the worst value ever achieved.
Warn
is the critical threshold value of the attribute. If the Value has reached and OVER this threshold value, with very high probability the harddisk is in trouble. If SMART is enabled in the BIOS, SMART will alert user in the POST screen, with some manufacturer specific error code. You may need to refer to your manufacturer then.
Note : Value, Worst and Warn are all relative values, such as percentage, not actual count. I have no idea how to calculate these values. This is the very S.M.A.R.T. algorithm, isn't it? ?(
Raw
is in fact, the most understandable represented value here! It represents the actual count of the attribute. SpeedFan displays this raw value as hexadecimal numbers. Such as Power On Hours Count is "AA8", which is 2728 in decimal numbers, meaning that the harddisk has been power on for 2728 hours!! There are some Raws represent average rate, such as "CRC Error Rate" etc.
[size=15]4. S.M.A.R.T. Attributes In Detail[/size]
Hopefully by now, you have the basic idea how to read the tabulated data. I will try my best to go through the attributes one-by-one, which after that shall make you understand more about S.M.A.R.T. and of course, starts to appreciate it.
Raw Read Error Rate represents the condition of the physical disk, based on raw (physical) read errors, and physical surface defects.
Spin Up Time is the time taken for the hdd to spin-up. more info
Start/Stop Count is the number of counts (cycles) the hdd start/stop. more info
Reallocated Sector Count - the number of sectors have been reallocated. Surface scan and found bad sector will increase this count. Now this drive has 7 bad sectors already!
Seek Error Rate - how often the drive failed to locate the data (seeking)
Power On Hours Count - the number of hours you have powered on the HDD.
Spin Retry Count - how many time your drive need to attempt to get the drive platter spinning. If this value is more than 1, your drive is seriously in very bad condition!
Calibration Retry Count - represents the number of time your drive perform calibration retry. I am not sure if low-level format would increase this value.
Power Cycle CountThe number of time the hdd has been powered on. On and Off = 1 cycle.
Read Soft Error Rate - should be Soft Read Error Rate. Similar to Raw Read Error Rate but this one depends on logical level, such as error occured in the hdd buffer, etc.
Temperature - The drive temperature, Forget the relative values, read from the Raw value -- "2D" in this example, which is 45C. But my SpeedFan displayed 47C at that time!! SpeedFan seems to produce some +-2C error from actual reading once in a while. :P
Hardware ECC Recovered is the number of counts ECC correction is performed on the data.
Reallocated Event Count - similar to Reallocated Sector Count but this one is on the data.
Current Pending Sector - is the number of counts how many sectors are currently pending. But what is a pending sector?? ?( ?(
Offline Correctable - which is Off-line Scan Uncorrectable Sector Count. Again, what is off-line scan?
UltraATA CRC Error Rate - which is in fact, CRC Error Count instead of rate. As shown, there have been "3C3", which is 883 errors occured already!!!
There are more S.M.A.R.T. attributes, such as
Thoroughput Performance - again, this relative value is surely got from some wierd algorithm again.
Seek Time Performance - some algorithm has been used to calculate this performance value.
Power Off Retract and Load Cycle Count are IBM HDD specific features -- unload the head off the platters when power off. More info on Head Load/unload cycle.
[size=15]5. SpeedFan S.M.A.R.T. Fitness and Performance bars[/size]
I should not comment on this too much because this is Almico's work. I am not sure how he calculate to define the "fitness" and "performance" though. It could probably based on mathematic relation between the current Values and the threshold Warns.
For most hdds, like Maxtor and Seagate's, out-of-the-box the fitness bar has already reaching half-way 50%. But for IBM hdd, the fitness bar is always around 100%. This is because IBM hdd has its threshold/Warn values set to unrealistically high until it's quite unreachable even after a long term use. While for other brand HDDs, the threshold values are more realistic. Thus, the fitness bar in particular, does not tell the true fitness of the HDD. Take it as a reference only. Please always refer back to the Raw values to determine the fitness.
[size=15]6. Conclusion : Judging HDD fitness by our own selves![/size]
Now we all know what the Attributes are, so roughly everyone will have the basic idea how to judge HDD health by our own selves depend on the attributes you're reading. S.M.A.R.T. itself however, define "fitness" and "performance" based on its own algorithm.
We can categorize the attributes into :
Error Related Attributes
"UltraATA CRC Error Rate", "Raw Read Error Rate", "Raw Soft Error Rate", "Hardware ECC Recovered Count", "Reallocated Sector Count", "Reallocated Event/Data Count", Offline Correctable"
-- tell how often are those errors occured. For the above example, this Maxtor harddisk should be RMA-ed for its high CRC Error Rate count.
Drive Fitness Attributes
Spin Up Time, Start/Stop Count, Seek Error Rate, Power On Hours Count, Spin Retry Count, Calibration Retry Count, Power Cycle Count, Power Off Retract Count, Load Cycle Count
-- check "spin retry count" and "Seek Error Rate", any value other than zero is really bad.
Other Attributes
I have no idea what they are for except Temperature.
As the conclusion, understanding S.M.A.R.T. attributes helps in knowing your HDD fitness by your own self, rather than waiting for the S.M.A.R.T. to alert you for severe error. That might be too late already. 8o
Thanks for reading.
Edited:
1. for better reading pleasure
2. added Conclusion
3. added explanations about SpeedFan SMART Fitness and Performance bar.Quote
Originally posted by WarLord
I like this HD tool. i use it everyday now. the tempture readings are great Hd temp cpu temp and even the system temp nice added feature to the monitoring. And this is an alternative to enabling the SMART in the bios? Thats the way im understanding it. is that right Maesus ?Because i have disabled in bios. She went threw alot of trouble here. thank you
Well from my observation, whether SMART is disabled or enabled in the BIOS, SMART is always working within the HDD itself.
Basically SMART is acting like a blackbox, monitoring and tabulating HDD condition from time to time and its attributes only fully revealable by the manufacturers. SpeedFan's SMART status only displays partial information that is displayable. Some attributes are hidden, ~OR~ the attributes' locations are different from one HDD to another brand, such that some values don't correspond to the attribute meaning at all.
It is very doubtful to claim that enabling SMART in the BIOS will hog down the performance. Just like a transport bus (yeah real bus that fetch passenger :P ), with or without the black box installed can't help it if the driver wants to speeding. :P -
How to read the contents of attached files
Hi,
I am designing a Form using LiveCycle Designer 8.0
Scenario:
User can attach the file through "Attachments" facility provided on Adobe Reader.
The requirement is to attach 3 documents and post it to SAP system using Web services.
I am using the following code(which i got from this forum only) to find the number of files user has attached.
d = event.target.dataObjects;
n = d.length;
xfa.host.messageBox("Number of Attachments: "+n);
//Displaying the names of the Attached files
for( i = 0; i < n; i++ )
xfa.host.messageBox("Name of the file: "+d[i].name);
My problem: is how to read the contents of the attached files so that I post it to SAP using Web services
Thanks in advance!!
Taha AhmedIn order to read the content of the Redo Log files, you should use Logminer Utility
Please refer to the documentation for more information:
[Using LogMiner to Analyze Redo Log Files|http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/logminer.htm#SUTIL019]
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/] -
How can I move an event in my calendar to my "completed" calendar without changing all the events in the series?
As Apple has yet to upgrade iCalendar so I can check off my events as I complete them (no, I do not want to use a task list/reminder list), I want to be able to move my events to my "completed" events calendar as I complete them. The issue is that most of my events are repeating events, and it changes the entire series. How do I change only the event I clicked on using my iPhone?
ThanksIf you change anything in a repeating calendar entry it will give you the option of disconnecting it from the series. So may any random change, choose to not change the series.
-
IMovie 10 - how do I move an event from one library to another?
Greetings,
I have updated all of my projects and events from iMovie 9 to iMovie 10.0.1. They now all sit in different libraries on different external HDDs.
How do I move an event from one library to another library in iMovie 10? How do I copy an event from one library to another library in iMovie 10?
Thanks,
JohnSimply drag and drop from one library to another. See: http://help.apple.com/imovie/mac/10.0/#mov3fa25bae7
Geoff. -
How do I add an event to my calendar in iPhone 4s?
how do I add an event to my calendar in iPhone 4s?
Launch the calendar app and tap the "+" button on the top right. Tap the "Done" button once you are done entering the details.
Maybe you are looking for
-
How to install Apple Superdrive on MacBook Pro 17" OS 10.9.1 ???
Want to use an external Superdrive on my MacBook Pro 17" / OS 10.9.1 when burning a bunch of DVD's etc. so as to not put too much wear and tear on my internal. How to?
-
External drive - USB or Fire wire or AC
Hello I dont know where to put this question so: Which would be the best for a 500GB external drive, USB & fire wire or AC? I want a portable external drive (2.5) but am not sure whether AC is best route or if USB/Fire wire? Thank you Veedeekay
-
Hi All. Does anyone know how can display time units is the y-axis in the format of hh:mm:ss? Also I'd like to show pace units -- for example 10m 30s/mile -- in the y-axis also. This is for a fitness website and I've been using webcharts3d designer to
-
Generating TOC into Printed Document
Hi! Another query from me! I am outputting my RH10 project to Printed Documentation - Word. I have created a TOC, added books and the content for each level and saved. When I click Printed Documentation to generate a word document I select the requir
-
Send form data via email after posting to MySQL database
I have created a form in DreamweaverMX 2004 and then tied it to mySQL database so that on submit the data posts to the database. This works fine. It also goes to a "success" page just fine. I then added in some php code to also email a few of the fie