How to read the position in an linear encoder, model AT112 from mitutoyo?

Hello,
any one knows how to read the positon in a linear encoder, model AT112 from mitutoyo, that have the signal out in the sinusoidal form?
thanks

Hello Hugo,
In order to help you efficiency, please contact National Instruments (01.48.14.24.24) with the reference number 409230.
I will personnally help you to connect your linear encoder.
Regards.

Similar Messages

How to read the value of Non-Linear Transformer ?

Hi there !
I know that we could make "modified" transformer for special purpose (with Vsec=5V for example). But, instead of make a new transformer, it might be more easier if we could know how to read the value of those transformer. For example, NLT_PQ_4_120 or NLT_PQ_4_10. To be narrowed, what is the meaning of 4_120 and 4_10 ?
Anyone ?
Ghost Recon Team Leader

To understand the models you mentioned you need to understand XSPICE. I suggest you use the virtual transformer instead because it is easy to change the turn ratio, you can double clicking on the component and enter what ever ratio you want. This component is found by selecting the menu PlaceàComponent
Group: Basic
Family: Basic Virtual
Component: TS Virtual
Tien
Tien P.
National Instruments

How to read the error message like clipping positive or -ve in Tektronix oscillioscope 3012B

During acquiring the Sine wave or triangular wave from TDS3012B, if the amplitude or Max or min is clipping, how do you read the error? I used *ESR?, first time when I ran the error query program, it gave me Error message saying it is clipping, after that If I run again,the error query , It would not give me the error message, I couldn't reproduce it, eventhough but On the screen if I measure, Amp, min and Max it says that it is clipping positive or -ve. I was wondering how to read the error message while aquiring the data? If any one could help me that would be of great help.. Thanks

Usually, reading the error status register clears it. I'm not familiar with this particular model of scope but you may have to initiate a new acquisition in order for the scope to generate a new error. Another possiblity is that a new error will be generated when the vertical scale changes. Unless someone posts with an answer, I'd say that your best bet to get an answer is to contact Tektronix technical support.

How to read the whole name of a music title while scrolling down a list of titles? With the new iOs7 Music App there is no more black box showing the entire name!

How to read the whole name of a music title while scrolling down a list of titles? The old software-app had the function to click for a longer time on a titles beginning letters until a black box revealed the entire name. I miss this function especially for my classical music, because lots of pieces start with similar words. E.g.:
"Beethoven: Variations On "Ein Mädchen Oder Weibchen", Op. 66 - Var. 1"
"Beethoven: Variations On "Ein Mädchen Oder Weibchen", Op. 66 - Var. 2"
Scrolling in a list of title, I can't distinguish the titles, because just the first words are shown followed by: "...".
That's horrible!

Or you could include a width to your body style:
body {
background-image: url(Logo/sky1.jpg);
background-position: center center;
background-attachment: fixed;
width: 75%;}
It might work or not depending on your other color scheme.

HELP!! How to get the position of active windows in the desktop

How to get the position of active windows in the desktop

You mean, active windows other than the program you're running, or windows the program puts there? And a real desktop (like where MyComputer is), or a desktop pane?

How to read the current selection in a table.

Hello Experts,
I've this issue with the web dynpro. I have a Adaptive Webservice Model in web dynpro. And I have three tables in the UI. When a row is selected in the first table, the second table is populated with the appropriate data (using a method in the web service.) the same applies to the third table, when the a row is selected in the second table, the third table has to be populated with the appropriate data. The methods in the web service are all working fine. However, in web dynpro, I am not able to figure out on how I read the selected row in a table. Any information on how to resolve this would be really really helpful.
<
wdContext.currentGetMailElement().setProfileID("-Should be read from the selected row in the table.");
wdThis.wdGetMailControllerController().executeGetMail();
>
regards,
Sam.

Hi Samuel,
I didnt clearly understood your problem. When you are selecting a particular row in a table you are executing a web service named Get Mail. Are you passing any input parameter(any selected row data) while executing a web service. And when you get the response node where you have a attribute in the node getmail. Am I right.
If this is the case, then first check if the GetMail node is present or not by comparing it will null or checking its size. If the node is null then you will not get attribute as the element itself is null as nothing is retrieved in response. And if the node is not null then the element at 0th position is selected by default. you can retreieve the attribute by directly using the following code
if(wdContext.nodeGetMail() !=null)
String profileId= wdContext.currentGetMailElement().getProfileID();
Check if this works for you.
Regards,
Ardhendu Sarkar

How to fix the position of different component?

Hay all,
Can anybody tell how to fix the position of any component so that they cant be moved from there initial positiion
Regards,
Sharad Agarwal

Set layout to null and set bounds of the component to whatever you like.

How to read the content in one node of XML in Java? Pls help

My dear brothers,
I am a newbie of XML, I have a exercise which is creating a Tree View from XML file. But the trouble is I do not know how to read the content in one node of XML file. I decide to use the algorithm as following:
1. Create a GUI form which gives the ability for user to choose a XML file (ok)
2. Load XML and return the file (ok)
3. Read the file from node to node to create the node in Tree View (?!)
Please help me, and if you are enough kind, please give me an small example to easy understand. Thanks in advance.
Hoang Yen Binh

I hope this one helps you.
     <ABC Type="ProductBased" ProdName="One" Location="India">
          <CEO>Raj</CEO>
          <Finance>Vikram</Finance>
          <HR>Karthik</HR>
          <Technical>Satish</Technical>
     </ABC>
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.NamedNodeMap;
import org.w3c.dom.Attr;
import org.w3c.dom.NodeList;
import org.w3c.dom.Node;
import org.w3c.dom.DOMException;
import javax.xml.parsers.ParserConfigurationException;
import org.xml.sax.SAXException;
import java.io.File;
import java.io.IOException;
public class XmlReading {
     Document doc;
     Element element;
     public static void main(String[] args) throws Exception{
          XmlReading xr = new XmlReading();
          xr.getXmlParser(args);
     public void getXmlParser(String[] args) {
          DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
               if(args.length != 1) {
                    System.err.println("Argument Required");
          try {
               DocumentBuilder builder = factory.newDocumentBuilder();
               doc = builder.parse(new File(args[0]));
          }catch(ParserConfigurationException e1) {
          }catch(SAXException e2) {
          }catch(IOException e3) {
          getAttributes();
     public void getAttributes() {
          // Retrive the entire Document from the Dom Tree
          element = doc.getDocumentElement();
//          System.out.println(element);
          NamedNodeMap attrs = element.getAttributes();
          // Get number of attributes in the element
     int numAttrs = attrs.getLength();
     // Process each attribute
          for (int i=0; i<numAttrs; i++) {
               Node node = attrs.item(i);
               // Get attribute name and value
               String attrName = node.getNodeName();
               String attrValue = node.getNodeValue();
               System.out.println(attrName + ": " + attrValue);
          String s1 = element.getTagName();
          System.out.println(s1);
          // To get all the elements in a DOM Tree
          NodeList nl1 = element.getElementsByTagName("*");
          int i2 = nl1.getLength();
          System.out.println(i2);
          for(int i=0; i<i2; i++) {
               System.out.println(nl1.item(i) + "\n");
}

How to read the data in excel sheet

Dear sir,
How to read the data in excel sheet when i recieve a data serial communication... ie i have store a data in excel such that
Cell A Cell B
A Apple
B Ball
C Cat
D Doll
when i recieve A from serial communication i have to display Apple, and when i recieve B i have to display Ball and so on..

Hi,
I would recommend you to have a look at the VI attached. It makes use of a VI named 'Read from Spreadsheet' to read the row and column data from the tab delimited excel file. The read data is then searched for the Alphabet specified and finally returns you the corresponding string. The test file used to validate the operation of the VI is also attached.
Trust this would help you solve the issue.
Regards,
Sagar G Yadav | Application Engineer | National Instruments
Attachments:
read_from_excel.vi ‏10 KB
Book1.txt ‏1 KB

How to read the file from a folder.

Hi All,
How to read the file from a folder or directory from the non sap server / remote server.
Regards
Sathis

open dataset filename for input in text mode
encoding default.
filename is character type variable with the destination filename.
Edited by: Jino Augustine on Apr 19, 2010 1:31 PM

How to read the check box value in alv report

hi experts,
i m working on one alv report where i m using the check box for field selection in alv display.
but i don't know how to read the only selected fields.
wa_fieldcat-fieldname = 'BOX'.
wa_fieldcat-tabname = 'IT_HEADER'.
wa_fieldcat-seltext_m = 'Box'.
wa_fieldcat-checkbox = 'X'.
wa_fieldcat-input = 'X'.
wa_fieldcat-edit = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'AUFNR'.
wa_fieldcat-tabname = 'IT_HEADER'.
wa_fieldcat-seltext_m = 'Sales Doc'.
wa_fieldcat-hotspot = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = v_repid
     I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
     i_callback_user_command           = 'USER_COMMAND'
     i_callback_top_of_page            = 'TOP_OF_PAGE'
     it_fieldcat                       = i_fieldcat[]
     i_save                            = 'A'
     it_events                         = v_events
    TABLES
      t_outtab                          = it_header
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
*&      Form USER_COMMAND
      text
     -->R_UCOMM    text
     -->,          text
     -->RS_SLEFIELDtext
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
when '&RELEAS'.
endcase
endform.
i gone through some already posted que for same problem i tried options like
loop at it_header.
endloop.
but i m getting box field empty.
is there i missed something? plz sugeest.. if u have any other solution plz post...

Have this code in your user command fm:
* For capturing changed data
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
    IMPORTING
      e_grid = w_grid.
CALL METHOD w_grid->check_changed_data
    IMPORTING
      e_valid = w_valid.
IF w_valid = 'X'.
loop at itab where mark = 'X'.
endloop.
ENDIF.
Regards,
Ravi

How to read the Variance Analysis report S_ALR_87013139, Pdt cost by Order

Hi,
Could someone tell me how to read the variance analysis report, S_ALR_87013139 - Cumulative for product cost by order. The report has the following fields, Target (Debits),     Actual (Debits),     Scrap,     Var. Without Scrap,     Work in Process(WIP),     Control Costs.
I am looking to find how the numbers add up.
Thanks for your help.
Ram
Message was edited by:
        Ram R

Thanks Sridhar,
When I analyse the report S_ALR_87013139 - Cumulative , for a product for a period (with no scrap), I get the following
Target (Deb) -   46,855.55
Act (Deb) - 58,315.87
Scrap - 0.00
Var W/O- Scrap - 11,269
WIP- 0
Control Cost - 0
Here Actual - Target is not equal to Variance. What could be the issue?
Could you please tell me how SAP would update this report with target & actual costs with respect to open production orders, carried over from previous periods.
Thanks,
Ram

How to read the contents of attached files

Hi,
I am designing a Form using LiveCycle Designer 8.0
Scenario:
User can attach the file through "Attachments" facility provided on Adobe Reader.
The requirement is to attach 3 documents and post it to SAP system using Web services.
I am using the following code(which i got from this forum only) to find the number of files user has attached.
d = event.target.dataObjects;
n = d.length;
xfa.host.messageBox("Number of Attachments: "+n);
//Displaying the names of the Attached files
for( i = 0; i < n; i++ )
xfa.host.messageBox("Name of the file: "+d[i].name);
My problem: is how to read the contents of the attached files so that I post it to SAP using Web services
Thanks in advance!!
Taha Ahmed

In order to read the content of the Redo Log files, you should use Logminer Utility
Please refer to the documentation for more information:
[Using LogMiner to Analyze Redo Log Files|http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/logminer.htm#SUTIL019]
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

How to read the and Write the PDF file give me the solution

Hi all,
How to read the and Write the PDF file give me the solution
My coding is
import java.io.File;
import com.asprise.util.pdf.PDFImageWriter;
import com.asprise.util.pdf.PDFReader;
import java.io.*;
import java.io.FileOutputStream;
public class example {
// public example() {
     public static void main(String a[])
          try
          PDFReader reader = new PDFReader(new File("C:\\AsprisePDF-DevGuide.pdf"));
               reader.open(); // open the file.
               int pages = reader.getNumberOfPages();
               for(int i=0; i < pages; i++) {
               String text = reader.extractTextFromPage(i);
               System.out.println("Page " + i + ": " + text);
// perform other operations on pages.
PDFImageWriter writer = new PDFImageWriter(new FileOutputStream("c:\\new11.pdf"));
               writer.open();
               writer.addImage("C:\\sam.doc");
               writer.close();
               System.out.println("DONE.");
reader.close();
          catch(Exception e){System.out.println("error:"+e);
          e.printStackTrace();
I get the pdf content then it returns the string value but ther is no option to write the string to PDF, and we only add a image file to PDF,but i want to know how to wrote the string value to PDF file,
Please give response immtly
i am waiting for your reply.
thanks,
Suresh.G

I have some question flow
How library to use this code.
I try runing but have not libary.
Please send me it'library
Thank you very much!

How to read the data from Excel file and Store in XML file using java

Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,

If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com

How to read the position in an linear encoder, model AT112 from mitutoyo?

Similar Messages

Maybe you are looking for