How to read ZIP from Source System

Hi frnds,
In my sender side i have Zip file, I need to read from source directory, File adapter will provide option to read Zip file??
if i want to generate out put in ZIP format is it possible??
tell me what are necessary steps required??
Regards
Raj

Hi Raja,
All the steps will be same as a file to file scenario. Nothing new except that you need to configure your sender channel as mentioned in the blog that i asked you to refer. Then you just put your file with extension .zip in the source directory. This is in case you dont need to process data(no mapping required).
In case you do not need to create a mapping(just transfer data from one place to another), you can directly configure your scenario. No need to do anything in the IR.
Hope it makes it clearer.
Thanks and Regards,
Sanjeev.

Similar Messages

How to upload Transaction data from source system to BI 7.0

Dear friends,
I want to know how to upload Transaction data from source system to BI 7.0.
if anybody having step by step material for this process ,please send it to my
mail id.
[email protected]
[email protected]
Thanks,
D.prabhu

Hi,
it works in the same way as before in case you are not using the new features like the dtp and the transformations. Using the new features, you schedule a infopackage to load the data up to psa and schedule a dtp to post the data to the targets.
regards
Siggi
PS: We want to share knowledge in sdn and not keeping it private by having the information sent to our email adresses.

How to read data from a zipped MS Access file?

How to read data from a zipped MS Access file?

RPJ,
You do not need to use the Close Zip File.vi when you unzip a folder. This VI is used when you are creating a zip folder.
As for examples, I found a couple of ActiveX based MS Access examples. These programs look to be pretty basic. For more in depth example I would search Microsoft Developers Network
http://zone.ni.com/devzone/cda/epd/p/id/2188
http://zone.ni.com/devzone/cda/epd/p/id/1694
Regards,
Jon S.
National Instruments
LabVIEW R&D

How to design EDW for source systems from different Time-Zones

How to design EDW for source systems from different Time-Zones?
Suppose IT landscape has a global BW in New York, and source systems in americas, europe and asia, then how the time-zones effect on time related things like delta selections on date or timestamp etc.

As you said BW is global in NY, your source system must be global too. People from various locations can connect to same source system and thus timestamps for delta is always maintained as 1 single time. We have same scenario in our project. Our R/3 system is used by users in US and Europe. So we run deltas twice in day to make sure we got deltas from both locations.
If scenarios was such that all locations connect to separate R/3 system, then obviously you have multiple queues. That is unique delta queue for each source system so deltas will be pulled as per data in respective queues.
Abhijit

Can the Adobe PDF plugin carry exact phrase search criteria through from source system into Reader?

In SharePoint 2013 if you search for an exact phrase and then view a PDF that is returned by the search (in Reader via the PDF plugin) then the Reader will treat the complete phrase as individual words.
For example, search for "High Court" in SharePoint, get returned a set of PDF documents, and when you view one of them through the Reader the hit highlighting will be for each instance of "High" or "Court".
What is wanted is hit highlighting only of instances of "High Court".
I get the same behavior if the Adobe PDF plugin is installed with the Filesite DMS. So it seems to be standard behavior for the Adobe PDF plugin
Is there a way to make the Adobe PDF plugin carry exact phrase search criteria through from source system into Reader? And then hit highlight the exact phrase only.

Hi Sam,
You can opt for 'Advance Search' option in Reader to match the whole words to get to the specific documents.
Regards,
Rave

Question to Transferring Global Settings from Source Systems

1) When we do this steps, we found the following information as follows, so the question is that which fields that we should maintain?
BW User ALE
Debugging User
BEx order number
Releasest. hier
Monitor initial
Last IDoc no.
Last IS-Nr.
XPRA executed
Lock Mangr Logs
MD: Sing. Rec. Inst
RFC BI Accelerator
2) If we maintain some of fields should we do something before, and how? e.g. we know BW user ALE = aleremote, so should we maintain aleremote user using SU01 both in R/3 and BW before we do Transferring Global Settings from Source Systems
Thanks for the answer.

Is anyone know how to setting Transferring Global Settings from Source Systems, your answer will be high appreciate.

How to transfer data from one system to another by datamart please give de

how to transfer data from one system to another by datamart please give details

Hi Deba,
Find the below SAP help doc which may help u...
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also find the below threads...
Loading data from one cube to another cube.
data copy from infocube to infocube in two different BW systems
Delta when loading from ODS to ODS
reg datamart
Data mart flag
Regards,
KK.

Error in Process Chain while extracting data from source system

Hi All,
Dail we are facing problem while retrieving the data from source system for the data source 0TB_AMOUNT1 in the process chain, it is giving error "Function module BANK_TMC_API_SIM_GET does not exist Furnction module". when I repeat the step than it is going fine.
Please let me know why this error is coming for first why it is not coming after repeating the step?
Thanks & Regards,
Murali.

Hi Murali,
Hope you are doing good..
Is it a full or Delta load on a daily basis? Did you check if the FM exists in your system?
Did you try debugging the load in source system and check if the extractor is trying to call FM you mention.
If possible please post the exact error message you are receiving so that we could get an idea whats the error and why you are encountering it.
As of now what i can suggest is, go to RSA2 in source system, give the datasource name and check if the extractor code has FM in it.
Regards,
Anil Pragada.

To retain the same file name in target(File) that coming from source system(AS2).

Hi All,
I have a requirement to send the two file from the third party system(GXS) to SAP ECC via SAP PI(version - 7.4). We are using AS2 adapter at the sender side to pick the file and using File Adapter to place the file in ECC.
Its a pass through scenarion(No ESR part is used).
Requirement:
We are going to get 2 files ->Example: one from Axis and another one from ICICI -> each bank file will have a file name ->
We have to post the file at the target system with the same name as source file name, the source file name could come dynamically(with diff time stamp).
Please let me know, Is it possible to achieve the above requirement(we have to retain the file name in target that coming from source system) with Sender AS2 adapter, If yes then please suggest the best approach.
Regards,
Pradeep Bawlia

Hi Guys,
The above requirement is solved now.
Solution - I used java mapping for extracting the same source file name and assignning the same to the target system.
Code:
public class ExtractFileName_ASMA extends AbstractTransformation{
public void transform(TransformationInput in, TransformationOutput out) throws StreamTransformationException
DynamicConfiguration conf=in.getDynamicConfiguration();
DynamicConfigurationKey key_AS2FileNmae = DynamicConfigurationKey.create("http://sap.com/xi/XI/AS2/AS2", "AS2Filename");
DynamicConfigurationKey key_FileNmae = DynamicConfigurationKey.create("http:/"+"/sap.com/xi/XI/System/File", "FileName");
String As2FileName=conf.get(key_AS2FileNmae);
conf.put(key_FileNmae, As2FileName);
try{
byte b[]=new byte[in.getInputPayload().getInputStream().available()];
in.getInputPayload().getInputStream().read(b);
out.getOutputPayload().getOutputStream().write(b);
catch(Exception e)
2. Another solution we can use the graphical mapping and need to use the dynamic config UDF at mapping level to acheive this requirement but here is one drawback - we need to do content conversion is this case.
In case of Java mapping, no need to play with source file.
WITHOUT USING ESR, WE CAN NOT ACHEIVE THIS REQUIREMENT.
Regards,
Pradeep Bawlia

How to read HyperLinks from pdf file??

hi developer's,
I am in PDF processing... I am having doubt in that Processing.
How to read Hyperlinks from PDF file?
I can able to set the hyperlink.. But i cant able to get the hyperlinks..
The following example program will set the hyperlink to the PDF file using lowagie API..
import com.lowagie.text.Anchor;
import com.lowagie.text.Chunk;
import com.lowagie.text.Document;
import com.lowagie.text.DocumentException;
import com.lowagie.text.Paragraph;
import com.lowagie.text.html.HtmlWriter;
import com.lowagie.text.pdf.PdfReader;
import com.lowagie.text.pdf.PdfWriter;
public class Argu1 {
     public static void main(String[] args) {
          Document document = new Document();
          try {
               PdfWriter pdf = PdfWriter.getInstance(document,
                         new FileOutputStream("PageLink.pdf"));
PdfReader pdf_read=new
               document.open();
               document.add(new Paragraph("Hi Everbody....!"));
               Anchor pdfRef = new Anchor("Click Me");
               pdfRef.setReference("www.java2s.com");
               Anchor rtfRef = new Anchor("Touch Me");
               rtfRef.setReference("www.sun.com");
               System.out.println(rtfRef.reference());
               document.add(pdfRef);
               document.add(Chunk.NEWLINE);
               document.add(rtfRef);
          } catch (DocumentException de) {
               System.err.println(de.getMessage());
          } catch (IOException ioe) {
               System.err.println(ioe.getMessage());
          document.close();
Help me how to read the Hyperlinks from the PDF file using java ...
Thanks in advance,
With Regards,
J.Imran

Instead of cross-posting unformatted code you could have taken a look at the API, because there you might have come across a method named getLinks...Even though it's not documented, I really suspect that it will return the Hyperlinks on a given page.

Help me, How to read data from USB ???

Help me, How to read data from USB ???

If its a disk on key or some portable hard drive than once its connected to the usb and recognized by the system you can access it through java like you would access your hard drive.

How to create a DB Source system in BW

Hi Guys,
Can anybody explain me how to create DB Connect source system in BW.
Points will be awarded.
Thanks,
Chinna

Hi Chinna,
Below are the steps to be followed for the SS creation in BW :
Prerequisites :
1.System Number
2.System IP address
3.ALEOLTP like userid and password this is the RFC user ID in the R/3 system. Usually set to communication - must be set to dialog in the R/3 Source System for the duration of the create/restore connection process. Note: the password must be in capital letters.(If all instances are in unicode system)
1.At the time of making the connection, the R/3 source system will need to be opened for client independent configuration.
2.If it is a connection create or restore, the personal userid of the person doing the work must have SM59 access.
Follow the naming convention which is being used in your system.
1.     Logon to r/3 source system using the r/3 RFC userid to check that the userid has been set to dialog user. It is mandatory that the r/3 source system userid be setup temporarily as dialog to create the connection. If not contact the requester to have this done before continuing with the next step.
Note: When re-checking to ensure that the r/3 userid is a dialog user, you may get prompted for new password. Change password, and make a note of the new password. Use this new password in the steps that follow for the r/3 RFC userid.
2.     Logon to BW system using your own userid.
3.     Enter transaction RSA1, In Source Systems, right-click on Source Systems as shown below to create new connection.
4.     In the screen select the appropriate Source System connection type. Suppose your are creating connection for r/3 instance, so in this case we pick the very first option.
5.     A popup window will get displayed asking for the necessary information. To fill in the appropriate information in the that screen you need the following information concerning the r/3 source system.
     IP address (Application Server) &
     System Number
Get this information for the r/3 source system from the SAP Logon Pad.
6.     If Parameters have been incorrectly entered then the following error message will appear : Check connection parameters for the source system.
7.     Re-check and re-enter correctly. If all is good then You will see the following prompt : Please log on as an administrator in the following screen.Click green check to continue.
8.     This will bring you to the r/3 logon screen. Logon using the r/3 RFC id. Once logged on click Check in Check RFC destination dialog box.
9. Consider the r/3 RFC destination screen.
10. Check to make sure that BW system information (Userid, IP address, System Number etc) is correctly showing in the Technical Settings and Logon/Security tabs. Next do the following,
     Step 1: Enter password for the BW RFC userid id.
     Step 2: Save Settings
     Step 3: From Test Menu , click on authorization. Ensure there are no errors
     Step 4: Back out of screen.
11.     System may ask you to logon as administrator again. Logon as in Step 10. This time click on Use in Check RFC destination dialog box.
Connection related processing will start up at this time, and continue for a little while (can be a couple minutes or more).
12.     Subsequently, a dialog box will show up on the screen.
13. Pick option, Replicate As Well.
Replication and activation of data sources & transfer structures will begin.
With the completion of this step you will have successfully established this source system connection. To confirm, right-click on the new source system entry and click on check
14. If the connection is good, the following message with the source system ID will display at bottom left corner of screen : Source system connection is Ok.
Hope this will be helpful to you.
Thanks & Regards,
suchitra.V

DataSource extraction very slow ( from Source System to PSA it takes 23 hrs

Friends,
We have enhanced the datasource 0CRM_SALES_ORDER_I with the user exit....after the enhancement i.e (adding the new fields and wrote some coding to enhance ...) the data extraction takes place for around 23 hours. there is approximately 2,50,000 records.
Can you please suggest any steps to tune up the performance of the datasource.
NOTE: Data Extraction from source system to PSA alone takes 23 hrs.once the data is arrived in PSA then the loading of data to cube is fast.
PLZ help me to solve this issue.
BASKAR

Hi Friends,
This is the code used for the datasource enhancement.(EXIT_SAPLRSAP_001)
DATA : IS_CRMT_BW_SALES_ORDER_I LIKE CRMT_BW_SALES_ORDER_I.
DATA: MKT_ATTR TYPE STANDARD TABLE OF CRMT_BW_SALES_ORDER_I.
DATA: L_TABIX TYPE I.
DATA: LT_LINK TYPE STANDARD TABLE OF CRMD_LINK,
      LS_LINK TYPE CRMD_LINK.
DATA: LT_PARTNER TYPE STANDARD TABLE OF CRMD_PARTNER,
      LS_PARTNER TYPE CRMD_PARTNER.
DATA: LT_BUT000 TYPE STANDARD TABLE OF BUT000,
      LS_BUT000 TYPE BUT000.
DATA: GUID TYPE CRMT_OBJECT_GUID.
DATA: GUID1 TYPE CRMT_OBJECT_GUID_TAB.
DATA: ET_PARTNER TYPE CRMT_PARTNER_EXTERNAL_WRKT,
      ES_PARTNER TYPE CRMT_PARTNER_EXTERNAL_WRK.
TYPES: BEGIN OF M_BINARY,
       OBJGUID_A_SEL TYPE CRMT_OBJECT_GUID,
        END OF M_BINARY.
DATA: IT_BINARY TYPE STANDARD TABLE OF M_BINARY,
      WA_BINARY TYPE M_BINARY.
TYPES : BEGIN OF M_COUPON,
         OFRCODE TYPE CRM_MKTPL_OFRCODE,
         END OF M_COUPON.
DATA: IT_COUPON TYPE STANDARD TABLE OF M_COUPON,
      WA_COUPON TYPE M_COUPON.
DATA: CAMPAIGN_ID TYPE CGPL_EXTID.
TYPES : BEGIN OF M_ITEM,
         GUID TYPE CRMT_OBJECT_GUID,
        END OF M_ITEM.
DATA: IT_ITEM TYPE STANDARD TABLE OF M_ITEM,
      WA_ITEM TYPE M_ITEM.
TYPES : BEGIN OF M_PRICE,
              KSCHL TYPE PRCT_COND_TYPE,
              KWERT TYPE PRCT_COND_VALUE,
              KBETR   TYPE PRCT_COND_RATE,
        END OF M_PRICE.
DATA: IT_PRICE TYPE STANDARD TABLE OF M_PRICE,
      WA_PRICE TYPE M_PRICE.
DATA: PRODUCT_GUID TYPE COMT_PRODUCT_GUID.
TYPES : BEGIN OF M_FRAGMENT,
         PRODUCT_GUID TYPE COMT_PRODUCT_GUID,
         FRAGMENT_GUID TYPE COMT_FRG_GUID,
         FRAGMENT_TYPE TYPE COMT_FRGTYPE_GUID,
       END OF M_FRAGMENT.
DATA: IT_FRAGMENT TYPE STANDARD TABLE OF M_FRAGMENT,
      WA_FRAGMENT TYPE M_FRAGMENT.
TYPES : BEGIN OF M_UCORD,
      PRODUCT_GUID TYPE     COMT_PRODUCT_GUID,
      FRAGMENT_TYPE     TYPE COMT_FRGTYPE_GUID,
      ZZ0010 TYPE     Z1YEARPLAN,
        ZZ0011 TYPE Z6YAERPLAN_1,
        ZZ0012 TYPE Z11YEARPLAN,
        ZZ0013 TYPE Z16YEARPLAN,
        ZZ0014 TYPE Z21YEARPLAN,
     END OF M_UCORD.
DATA: IT_UCORD TYPE STANDARD TABLE OF M_UCORD,
      WA_UCORD TYPE M_UCORD.
DATA: IT_CATEGORY TYPE STANDARD TABLE OF COMM_PRPRDCATR,
      WA_CATEGORY TYPE COMM_PRPRDCATR.
DATA: IT_CATEGORY_MASTER TYPE STANDARD TABLE OF ZPROD_CATEGORY ,
      WA_CATEGORY_MASTER TYPE ZPROD_CATEGORY .
types : begin of st_final,
           OBJGUID_B_SEL TYPE CRMT_OBJECT_GUID,
           OFRCODE TYPE CRM_MKTPL_OFRCODE,
           PRODJ_ID TYPE CGPL_GUID16,
           OBJGUID_A_SEL type     CRMT_OBJECT_GUID,
          end of st_final.
data : t_final1 type standard table of st_final.
data : w_final1 type st_final.
SELECT bOBJGUID_B_SEL aOFRCODE aPROJECT_GUID bOBJGUID_A_SEL INTO table t_final1 FROM
   CRMD_MKTPL_COUP as a inner join CRMD_BRELVONAE as b on bOBJGUID_A_SEL = aPROJECT_GUID .

Error Occures while loading data from Source system to Target ODS

Hi..
I started loading Records From source system to target ODS.while i running the job i got the following errors.
Record 18211 :ERROR IN HOLIDAY_GET 20011114 00000000
Record 18212 :ERROR IN HOLIDAY_GET 20011114 00000000
sp Please help me in these following Errors..
Thanks in advance,

Hello
How r u ?
I think this problem is at the ODS level, ZCAM_O04 is ur ODS Name.
Could u check the ODS Settings, and the Unique Data Records is Checked or Not ?
Best Regards....
Sankar Kumar
+91 98403 47141

Problem in activating datasource after replication from source system

Hi Experts,
After replication of data sources from source system ,I get all data sources inactive. I tried to make it active manually but every time I get
Syntax error in GP_ERR_RSAPTD1, row 27 (-> long text)
    Message no. RG102
Diagnosis
    Field "/BIC/CCZVBAK2031" is unknown. It is neither in one of the
    specified tables nor defi...
How do I go about solving this problem....Any advise please...

Hello,
You do not mention your source system release but can you execute the check report
described in the SAP note 493422 , if this does not resolve the problem can you goto
RSA1, right click on the relevant "source system" and choose the "restore" option,
then please try and replicate and activate the datasource again.
If you have BW release 7.0 please check that the note 929751is applied in your system
or that you are on a higher support package level.
If there is still a problem please le me know your BW Release and Support package level.
Best Regards,
Des

How to read ZIP from Source System

Similar Messages

Maybe you are looking for