How to readyshare with USB on NETGEAR

I Have a NETGEAR router with USB drive. Their instruction says enter smb://readyshare, click Connect.
how do I click connect?
TThen what do I do to get. The file from the USB drive?
help
grandma bow

Similar Messages

Neo2 Platinum - How to boot with USB storage?

Hi,
I can't find in any bios setting to enable boot with USB storage... It recognize the USB storage drive but not booting it. I am using Imation 256mb memory stick. It boots in other system where there is option to select in bios, but not with Neo2. please help

Some older threads dealing with the same issue :
https://forum-en.msi.com/index.php?topic=76565.msg540210;topicseen#msg540210

Need information on how to comunicate with USB devices

I have an aquisition unit that connects to the computer trhough a USB port. Does anyone knows how to comunicate usb devices with labview using a Universal Serial Bus (USB)?

Sorry for digging up old threads, but it seemed most relevent, and I always figure it's best to add onto old then start new. For ease of the next persons search.
So anywho, My first question is... I assume it is not necessary to open and close VISA sessions to USB ports, right?
I am having an issue where my device doesn't like to work unless a specific series of events take place... very unlike USB Devices in my experience. For instance, if you have the said device plugged in, and you turn it on, then open labview. It will spit out garbage. If you close labview, do nothing else, and open labview up... it will spit out the same garbage. ( by garbage i mean a series of y's with dots over it, and odd looking p's ... you know the kind of letters you get by pressing alt+###... i think in hex it winds up spitting out something like FF EF FF FF FF EF EF ) .... now, if from this current state, I unplug the USB and plug it back into the device, it will finally start to communicate properly.
Im curious why either labview or the computer itself are not recognizing the device on the USB port properly unless it is unplugged and then plugged back in. Ive tried to do reading on USB, and got all sorts of interesting tid bits of somewhat useless information. Im trying to determine if this is something I am not doing in labview, or if this device should have a driver to register with windows, or what exactly the issue is... Just a little background, I do explicitly know all the individual commands to this device so it is not an issue to communicate with it directly through visa...
Thought some of you might have insight or some similar USB experiences....
Message Edited by MJBrehm on 10-02-2006 02:17 PM
Message Edited by MJBrehm on 10-02-2006 02:19 PM

How to SCAN w. usb cable connected from my deskjet F 4580 series printer

HOW TO SCAN [WITH USB CABLE CONNECTED TO MY PC] FROM MY DESKJETF4580 ALL IN ONE PRINTER ?

If you have the HP full software installed, just press that "Scan" button on the printer.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

ITunes Library set up on NetGear R6100 router with ReadyShare from USB port?

Can the iTunes Library be set up on a NetGear R6100 router with it's NetGear ReadyShare feature. from a USB thumb drive or USB hard drive attached to the one available R6100 router's USB 2.0 port?
I have read the Apple forum post about a similar question for the more advanced NetGear R7000 router, which says it can work there. Unlike some of the other sibling Netgear routers that do not have ReadyShare, my R6100 does, which leads me to believe that it should work, since its the same technology (they both have a router USB port with ReadyShare). It just appears that the documentation is very limited. The other post said to format the USB drive to the Apple format (HFS+), rather than Fat32, get the Mac or Apple to see the iTunes directory located on the router's USB port.
I'd like to know if anyone has had any luck using the ReadyShare.feature on their R6100 for sharing their iTunes library to the same iTunes account on different devices (laptop, PC, AppleTV, iPod, etc). My Apple TV has recently acquired a problem of not being able to detect the iTunes library on my PC, aftert a recent iTunes update, but that's another problem that the forums show a lot of people having. So I figured that since my R6100 router has the ability to share media over the network, I would try to move my iTunes library there, hopefully to make it easier to access by my Apple TV, and make it unnecessary to have my PC running when I watch my purchased iTunes movies, that are stored in that library. Interestingly, my movie and TV show files are stored in my iTunes Music folder under the "Movies" and "TV Shows" subdirectories (folders). The way it is set up now, if I'm watching a HD movie purchased from iTunes with my Apple TV, the movie stops playing as soon as my PC is shut down, which confirms to me that the large movie files are being pulled from there to my Apple TV.

Oh groan, not another conspiracy theory. No, it's a lot more likely Apple and Netgear and the dozens of other manufacturers haven't gotten together with the thousands users who have come up with hundreds of thousands of ways of rigging things up and tested each and every one of them. I am confident if Apple were out to mess things up for you they could have come up with something a lot more devious.
Did you do a web search for this? With a Google search specifying Netgear with this error I found:
ReadySHARE USB Hard drive access issue from a Mac Computer (Time Machine or iTunes not working properly)
- Able to see USB hard drive content but unable to write to USB hard drive connected to router's Readyshare port from Mac computer.
- Error that says "The iTunes application could not be opened. Unknown error 13008"
http://kb.netgear.com/app/answers/detail/a_id/22763/~/readyshare-usb-hard-drive- access-issue-from-a-mac-computer-%28time-machine-or
In fact it is almost certain that it is an issue of that particular model router and the drive formats it can use.

How do i use USB 2.0 with an iBook G3?

I have a WD external hard drive that operates through USB 2.0 and want to use it with my iBook G3. I thought this wasn't possible since it has the old USB ports, but saw the post 28081 which I think says it is. It said you could use the old USB ports with a 2.0 drive. Should I be able to connect it directly (not mounting on my computer) or do I need some type of USB converter? Is there such a converter available? Thanks for any help!
kate

Hi, Kate. Welcome to Apple Discussions.
How successful using a USB 2.0 drive with the iBook's USB 1.1 ports depends on how you are wanting to use the external drive. You can use it for storing or archiving data, but data transfer will be very slow.
A better option with the iBook is a FireWire external drive (which connects through the FireWire port). It's much, much faster and allows you to make a complete bootable clone backup from your hard drive.

How do i let my iphone connect to my computer wifi with usb ?

As the title stated,
How do i let my iphone connect to my computer wifi with USB ?
The reason is because my iPhone 3Gs wifi having some problem. So i have to use a USB cable to connect to my computer and let my iphone to connect to the internet .
If i don't do this i would have to keep on running out & in to my room & my living room.
My iPhone 3Gs allows to connect to the wifi when i am in my living room, but once i enter my room the wifi won't be able any more. So please help me out please people
I'm not sure about why i can't connect to my Ad hoc even it's so near, but i can connect to my router if i am in living rooms.
Regards,

I believe the next time you sync your phone to itune via the cord, you will have to check the box that says sync via wifi and also enable that setting on your iphone.

Please explain me, how to remove an usb stick or memory chip? With experiences only in pc:s, I do not find on my first apple e.g. MacBook Air a solution. Until now I have succeeded to destroy one chip full of photos and - there's no life more in the port.

Please explain me, how to remove an usb stick or memory chip? With experiences only in pc:s, I do not find on my first apple e.g. MacBook Air a solution. Until now I have succeeded to destroy one chip full of photos and - there's no life more in the port...
Someone told me just to remove the chip in clicking it to the trash can and voilá - it would be done. But as I did so, on the screen appeared a text which let me know, that that way had been the wrong one...
I should have clicked Finder plus something.... which I do not now remember but which was then not found behind the Finder.
So please would someone be so kind and tell me, where I can find explanations for the most simple functions. The manual I got does not include a clue.
Thank you!

First make sure that no application is using or has open any files on the disk. Then:
Click and drag the disk icon on the desktop to the trash. Wait for the system to recognize the action, and the icon should disappear from the desktop. It is then safe to remove the device.
Alternatively, you can secondary click on the disk icon, and then primary click "Eject (name of disk)". Wait for the icon to disappear off the desktop, and then it is safe to remove the drive.
Here is a detailed help document on the subject.
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp1056.html

How to reset Windows 7 Administrator Password with USB Drive

The first thing we often do When we *Lose Windows 7 password* is asking a computer expert for help. However, it is only a moment for you *forgetting Windows 7 password* and it may take you several days to regain access to your system. From now on, don't worry about anything when you forgot windows 7 password. The article will give you some ideas to *reset Windows 7 password* with USB Drive.
*Section One: Reset Windows 7 password with Password reset disk.*
Most people usually only know how to create a new user with a strong password or change it. But they don't develop a habit to create a password reset disk for preventing lost password. It is a great and free gift from Microsoft. Click here to learn how to create password reset disk in windows 7 If you ready have a reset disk, please follow steps below:
Step1: Start or restart your computer, insert your USB. In the welcome interface, press ctrl+alt+delete twice, get into the classic log on box. Then type the user name that you want to use and a wrong password or leave it blank, and then press ENTER or click OK.. it will show you logon failed.
Step2: Click *Reset password*...... it will show you the Password Reset Wizard. And it enables you to create a new password for your user account. In the Password Reset Wizard dialog box, click *Next*.
Step 3: Chose the disk which you insert, click *Next*. Type a new password in the Type a new password box, and then type the password again in the Type the password again to confirm box. In the Type a new password hint box, type a hint for the password or not, and then click *Next**→**Finish*, and then try to log on to Windows XP again when use the new password you just set.
This *USB Password reset disk* only use in a certain account which you have created before, or it won't help. So it's better to create a password reset disk when you add a password to account.
*Section Two: Reset Windows 7 password with Windows Password Rescuer run from USB drive*
If you haven't created a password reset disk for your account and unfortunately you lost or forgot windows password, see bellow. I will show you step-by-step guide to do this task in several minutes with USB, without reinstalling system or losing any data.
Step 1: Prepare a 2GB USB flash drive and a computer which you can access to.
Step 2: Download Windows Password Rescuer Personal and install it to a computer which you have access.
Step 3: Run the program and burn the ISO image to the USB Flash Drive.
*NOTE:* This action will make your USB drive be formatted and all your data in it will be lost. You'd better provide one with nothing in it.
Step 4: Use the USB to reset windows 7 password. Before this step, you must set your computer boot from USB. Then start your computer, and you will enjoy the process of resetting the password, it is easy and quick. Don't worry if you have difficulty to bios setting, you can see more in the Windows Password Rescuer website.

Very interest posting. Thank you for this detailed description and useful links.
If you have more interesting stuff to share with us you are welcome.

How to install windows 8 onto an external hard drive connected with usb 2.0?

How to install windows 8 onto an external hard drive connected with usb 2.0?

Transfer win 8 from inside hd to external hd.
Cloning Win 8 is also OK.
Aomei Backupper can do the above.
In additional, Do you know Windows to Go?
http://www.disk-partition.com/features/windows-to-go-creator.html

How to install Windows 8 or 8.1 on linpus linux with usb? I have Acer aspire E5-551G-t16q.

how to install Windows 8 or 8.1 on linpus linux with usb? I have Acer aspire E5-551G-t16q.

Welcome to Apple Support Communities
Your MacBook Pro is not designed to install Windows through an USB drive, so do not use this option. You are getting a white screen because your MacBook cannot start up from the USB drive with Windows.
Instead, use a DVD with Windows, so you will be able to install Windows. Follow these steps > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
Mid 2009 MacBooks Pro do not support Windows 8 officially

Req any examples of how to use a USB midi controller/keyboards with Labview TIA

Req any examples of how to use a USB midi controller/keyboards with Labview TIA

Hi,
To access the MIDI ports you will need to call the Windows SDK. To send MIDI commands is relatively easy, here is an example that shows you how to send data to a MIDI controller or keyboard.
As far as input goes, this is the hard part. There are a series of functions that you need to call to open up the device, set some buffers and and possibly a callback to get notifications on the incoming data.
Reading MIDI data will not be an easy task, your best bet will be to implement this in a DLL and call that DLL in LabVIEW, there should be some code available o the web.
= "http://msdn.microsoft.com/library/default.asp?url=/library/en-us/multimed/htm/_win32_multimedia_... is a link to the Windows multimedia functions that you could use for MIDI input.
Let me know if you have any further questions.
Regards,
Juan Carlos
N.I.

How to connect a USB-6008 with lookout6.0?

hi >>>
I am a student in electrical and computer department, i want to ask about
How to connect a USB-6008 with lookout6.0 if thats possible?Could you
provide some help?
Regards
Manal

Hi Manal there is a way to do this, DAQ or DAQmx drivers have an OPC server, you can find the detailed information in the next link
http://digital.ni.com/public.nsf/websearch/13BBC10CCC1FECBA8625720B00823140?OpenDocument
Best Regards
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

My Mac Mini will charge - but not sync with - USB-connected devices (ipod, camera, memory card reader). How do I fix it?

My Mac Mini will charge - but not sync with - USB-connected devices (ipod, camera, memory card reader). I have tried unplugging the devices, restarting the computer, selectively unplugging and plugging in the devices, closing and opening the relevant applications (iTunes, iPhoto, etc). I have tried using different USB cables.
It's like all of a sudden the synching service stopped functioning or recognizing these devices for some reason. The other ports work just fine (monitor).
The only USB-connected external device that appears to be unaffected is the USB SuperDrive and it works on all the USB ports into which I plug it.
How do I fix this?

Open Console in Applications>Utilities & see if there are any clues or repeating messages when this happens or doesn't happen.

Does anyone know how to comunicate with a USB port using labview 6?

Does anyone know how to comunicate with a USB port using labview 6?

Unfortunately, there is no way to communicate directly with a USB port before LabVIEW 7.0 and VISA 3.0. With the new releases, there are functions called "VISA USB Control In" and "VISA USB Control Out" that give you direct access to a USB port.
You can definitely communicate with DAQ, Serial, or GPIB devices that are connected through a USB port, though. This is done seamlessly through the NI-DAQ, NI-Serial, and NI-488.2 drivers.
Luke S.

How to readyshare with USB on NETGEAR

Similar Messages

Maybe you are looking for