How to realize assign mul storage location to one supply area

senario description: in my project there two production plants A and B.and use the one serial work center which created under the plant A.At the same time ,raw material were stored the defferent storage location in every plant.and the storage location linked with WMS.my question is:
1how to design the supply area,create one links many storage location or create one supply area for every storage location.
2whether the TR can be created automatically when release the production order if the produciton order is in the plant B.

Hi,
1)how to design the supply area,create one links many storage location or create one supply area for every storage location.
To design supply area one storage location can be assigned to several supply area however one supply area cannot be assigned to several storage locations.
2whether the TR can be created automatically when release the production order if the produciton order is in the plant B.
To create TR automatically you have to configure at movement type & storage type level.
Regards
Ravi shankar.

Similar Messages

  • Regarding how  enable plant stock and storage location  view

    hi all:
       Could you please tell me how enable plant stock and storage location  view for MM01?
       couldn't be better if there are detailed steps .
       Thank you very much!

    Hi,
    The views depend to material type. So you need update in the material type attributes.
    SPRO - Logistic General - Material Master - Basic Settings - Material Types - Define Attributes of Material Types
    Double click on the material type and update the views in 'User Departments'.
    Thanks.

  • How to add new field storage location of MM in FMDERIVE

    Dear All
    I want to add new field storage location in FMDERIVE as need to consume budget on the basis of storage location
    Thanks in advance

    Hi SAPCOFI,
    With Eli and Aleksey on this thread, you dont need to worry anymore
    Just to add on to the inputs....
    Ensure that the USERTEMP1 buffer is cleared before a value is entered. We faced this issue wherein the previous S.Loc value was left as it is in the USERTEMP1, resulting in an incorrect assignment.
    I also suspect that you might need to run the process of identifying the enhancement point and populating the S.Loc value into the memory and then to USERTEMP1 for different transactions separately. Not sure if this is the standard process, but atleast we did it that way.
    For eg, we faced issues during Goods Issue from MIGO, as also during 301, 309 and 311 movement types. So execute these transactions too once the development is done and if the USERTEMP1 field isnt getting populated..
    FMDERIVE TRACE was the most important tool during our tryst with S.Loc mapping into USERTEMP1....Ensure that you set it everytime during testing for this S.Loc, post development
    @Experts - Please correct me wherever I've gone wrong.
    Regards,
    Wy.

  • How to extend material in storage location automatically???

    Dear Gurus,
    We have 9 plants in this company.
    Every time we create a material we have to extend it in all plants.
    Because it takes to long to do this one by one with MM01 we use mm17 and we created there a variant that extends the materials in all plants automatically.
    Then we have 3 storage locations for each plant. we use MMSC: enter storage locations collectively, to extend each the material in all the storage locations of the company 9x3 = 27. This takes too long as a procedure.
    Is there a way to automate this procedure, via rutines, codes, variants, ABAP etc??? and how should I do that??
    Thank you in advance

    Dear Friend,
    In customization spro>>MM>>inventory management>>Plant parameters>>select your plant >>click on create storage location automatically
    click that one, if your not extended the material to the particular storage location and doing the goods receipt to the particular storage location  system  will allow you to do that
    Regards
    Pramod

  • How to run MRP at storage location level?

    i know to run the MRP at plant level. i want to know to run the MRP at storage location level. what are the setting have to do for that? please can help any one....

    Hi,
    I think your question is answered by Sarita Doddi.
    If you have several storage location for your plant, you cannot plan for them separately unless you assign them to a separate MRP area.
    If a storage location (alone) is assigned to an MRP area, it means you wan to plan for it separately. If several storage locations are assigned to an MRP area (or let's say to a plant), it means you want to plan using all of them - and you cannot choose only one and plan for it (you can exclude a SLoc from planning w/o assigning it to MRP area).
    So, planning is not SLoc wise, it goes MRP area wise.
    BR
    Csaba

  • Material Master Record - How to remove or delete storage location

    Dear all,
    Is there a way to remove or delete a storage location accidentally extended via MM01 due to extending the general plant view?
    I've tried the following:
    1. I've used MM06 to flag the particular storage lcoation for deletion. However, when go to MM02 and select the plant view, the storage location that already been flag still exist for selection. I only get the warning prompt "The storage location has been flag for deletion".
    2. I tried MMSC attempt to delete and I get either messages with different material master record:
    a) "Material not fully maintained for this transaction/event"
    OR
    b) "Storage location 60BF already exists and cannot be deleted"
    P/S: If this question has been asked before by others, please point me to that thread.
    I'm grateful for any suggestion. Thanks.
    Steven

    Hi Jurgen,
    I've gone through the data archiving project in the past. I was actually hoping I don't have to go through this big exercise for this minor situation.
    The storage locations in the SAP system are fine. The problem is that when I came in to this organization, I found out that the procurement users have accidentally extended material master record to those storage location irrelevant to them. Those users don't post any stock to those accidentally extended storage location. They admit that it was a mistake. So, I don't really have to do stock movement or GI out from those affected storage location because there's nothing in them.
    Now that I've initially flag for deletion (MM06) of those mistakes done by those procurement users over the few years counting to 2000+ material master records affected. But the standard behavior of the SAP system allows change to proceed in MM02 except for that warning message MM081. So, I was actually asking around to explore if there's actually an option to make it an error prompt instead and stop the whole change process at MM02 transaction level.
    If I may re-confirm, what I've done so far via flaging for deletion of material master record at storage location level - is this the only correct solution available?
    Hope this clarifies my intention of opening this thread. Sometimes, users are quite tough in accepting the results from standard SAP system behavior.
    Thanks for the time in explaining.
    Steven

  • How do i check the storage location creation date ......?

    pls guide me to check the storage location creation date ......?

    Hi Srinivas,
    If u have noted the request number that generated for the creation of Storage location, then u can see them in SE10 transaction by selecting your transport request number and go to log details.
    regards
    Anand.C

  • Consignment stock in an storage location for one customer

    We have one procedure for consignment to customers. We create one sales order type KB (consignment fill up), and after receiving the material after creating PO and inbound delivery, we create the outbound delivery and then goods issue to send the material to the customer.
    With the current procedure, we are not currently able to distinguish between  the consignment for the sale and the consignment for  maintenance purpose, as for a few customers, we want to keep the material located in one storage location created for that special customer so it appears in the inventory separated from the general current customer consignment. With the current procedure, once the GI is done, the material goes to customer consignment and does not appear in any storage location.
    Do you know how we could create the new procedure?
    Thanks and regards.

    if we want to retrieve the material from customer consignment to unrestricted
    Either you can create a consignment pick up and a return delivery or reverse the original delivery so that the stock would be increased in the parent plant.
    For more details, check this thread
    [Return consignment stock to blocked stock|Re: Return consignment stock to blocked stock]
    thanks
    G. Lakshmipathi

  • How can I import Canon GPS location from one picture in project to remaining pictures in project?

    How can I import Canon imbeded GPS location from one picture in project to remaining pictures in project?

    If you have several photos taken at the same location you can use the Lift&Stamp tool to copy the GPS data to the other images.
    Seelct the image, press the "Lift" button, deselect all tags in the Lift&Stamp HUD but the GPS coordinates, then select all photos taken at the same place and and press the "Stamp" tool. (marked by the down arrow)
    Alternately use the "Places View". You will see the photos with a GPS location marked by a pin. Drag the photos you want to assign to the same place simply to that pin on the map and they will be assigned to the same place.
    Regards
    Léonie

  • How do I move my storage plan from one Apple ID to another

    How do I move my icloud storage plan from one Apple ID to another??

    Welcome to the Apple Community.
    Unfortunately, it is not possible to move your storage plan from one Apple ID to another.

  • How will the plant and storage location be determined automatically in PO

    Hi,
    In ME21n, I have entered Vendor, Material and Qty; also the info record is maintained. Now if I save the PO, the plant and Sloc should be auto determined. Where will I have to maintain this information.
    In master data the net SLOC for EP is maintained in MRP view.
    The SLoc value is getting populated if I enter the Plant.
    But I want that the Plant should also be auto populated. Please provide a solution.
    Thanks and Regards,
    Yogesh Walke

    Hi,
    You can create a Transaction Variant for creation of purchase order with your favorable plant.
    Use T.Code :SHD0,enter the T. Code: ME21N and enter in Transaction Variant: ZME21N and later
    confirm screen entry with your favorable plant to proceed further.
    Now create purchase order with ZME21N and find your your favorable plant
    Refer how to create Transaction Variant
    How to Create a Transaction Variant
    Transaction Variant - A Step by Step Guide for Creation - Code Gallery - SCN Wiki
    Regards,
    Biju K

  • How can I change the default location ipad/iphone pictures are stored in on my desktop?

    So here's my dilemma.  I have lightroom mobile on my ipad and iphone.  Seamlessly, lightroom mobile pushes these images to my desktop and saves them in a folder in windows.  I use an SSD and would prefer not doing read/writes to it that are unnecessary.  What makes the default location problematic is that I can't seem to change it.  Further, when I sync my ipad/iphone to my windows desktop using a cable, I will now have duplicates of images that were synced via lightroom mobile.  So, it would be infinitely simpler, I think, if lightroom mobile would sync ipad/iphone images to a directory I specify, on a supplemental hard drive for instance, and using dates for folder names rather than some default directory on my main drive where they are just dumped.

    Currently, Lightroom saves the images in a directory structure under a folder named "Mobile Downloads.lrdata", which is created in the same folder as the catalog file.
    For example, an image will be saved as:
    Windows = C:\Users\<username>\Pictures\Lightroom\Mobile Downloads.lrdata\<random hexadecimal name>\picture1.jpg
    Mac = Users/<username>/Pictures/Lightroom/Mobile Downloads.lrdata/<random hexadecimal name>/picture1.jpg
    you want to change the location of this "Mobile Downloads.lrdata" to another path.
    You should file an Idea, AKA Feature Request, to the Feedback site:
    http://feedback.photoshop.com/photoshop_family
    If there is enough people voting for it, the Product Managers will evaluate it and eventually apply it to a future version.
    It's your interest to advertise the Idea in order to increase the number of votes (I would vote for it).
    There is another similar discussion in the forum (How do i change the location of 'Mobile Downloads.lrdata' ?), I am posting the same answer there.

  • Help required !! For MRP at Storage location level

    Hi ,
    we need to have separate MRP fro two storage locations with direct procurement from Storage locations. Right now we have MRP run at Plant level for all the storage locations. we donot want the materials in these two storage locations to be planned at Plant level only with Separate storage locations. Plant level MRP will run for the other storage locations .
    I have created separate MRP areas for the storage locations & activated MRP for MRP Areas client level. material masters for the two storage locations have been asigned the MRP areas & maintained the MRP area data in material master .
    When we run the MD01, the Planned orders are getting created at both MRP areas plus at the Plant level.we donot want the planned orders creation at Plant MRP area level-only at the storage location level for those two storage locations MRP areas.
    Can anybody guide me -how to achieve that ? Did we miss any configuration?
    I tried to maintain scope of planning & getting error for parallel processing .
    Do i need to maintain parallel procesing with servers ?
    Pls need your input on this. Any help will be highly appreciated .
    Thank you in advance.
    Regards,
    Krish.

    Hi Krish,
    Go to following IMG path and check out your settings -
    IMG>>>Production>>>MRP>>>Master Data>>>>MRP Areas>>>
    (1) Activate MRP for MRP Areas    -
      Is that activated?
    (2)Define MRP areas>>>> Do setting s as per Storage Location
    Then run MRP.
    MRP Areas
    In this IMG activity you define whether MRP is to be carried out with MRP areas. In addition, you define the MRP areas for each plant in which you would like to carry out this type of materials requirements planning.
    The MRP area represents an organizational unit which carries out materials requirements planning independently. The results of the planning run are displayed specifically for each MRP area. An MRP area can include one or several storage locations of a plant or stock with a subcontractor.
    You can assign a material to various MRP areas.
    Basically, there are three types of MRP areas:
    Plant MRP Area
    Initially, the plant MRP area includes the plant with all its storage locations and stock with subcontractors. When you have defined MRP areas for storage locations and for subcontractors and you have assigned the materials, the plant MRP area is reduced by exactly this number of subcontractors and storage locations, as they are now to be planned separately.
    MRP Areas for Storage Locations
    You can define an MRP area that consists of a particular storage location by creating an MRP area and assigning the storage location to it. Material requirements for this storage location are then planned separately from the rest of the plant. You can also group several storage locations into one MRP area by creating an MRP area and assigning the storage locations. These storage locations are then planned together.
    MRP Areas for Subcontractors
    You can also define an MRP area for each subcontractor. Using an MRP area, it is possible to plan the components to be provided in subcontracting, by defining an MRP area for each subcontractor and assigning the components to be provided. You can therefore plan the requirements to be provided for these components for one subcontractor separately from the usual requirements.
    Up to now, MRP at plant level had been carried out. The various requirements were combined in the planning run and procurement elements were created for these pegged requirements with unknown sources.
    The introduction of MRP areas enables you to carry out material requirements planning and know the source of the pegged requirements and to be able to distinguish between them. The source of the pegged requirements can be, for example, production on a particular assembly line or a subcontract order.
    Material requirements planning for each MRP area allows you to have specific control over the staging and procurement of important in-house production parts and purchased parts for each shop floor and assembly area.
    Hope this will give you more idea about the same.
    Satish

  • Storage location not getting copied in process order for components

    Dear PP Gurus,
    While making a production /process order the storage location of component materials is not getting copied from material master into the process order, it is showing any default storage location.
    What couls be the reason for it..
    For all components it is defaulting the same storage location.
    Please throw some light on the issue what could be the reasoon for it..

    Dear,
    System determine issue storage location from the material master, the value of the storage location of the BOM item, or the storage location from the supply area.
    Check in BOM component details storage location you have defined.
    Check production storage location from the plant segment of the component is taken into account for the use of MRP areas also. When planned order is being created for the superior assembly in a MRP area?
    Also check the Material requirements planning (PP-MRP)
    --> planning process
      --> BOM explosion and dependent requirements determination
        --> storage location determination for BOM explosion
    Regards,
    R.Brahmankar

  • Restrict certain Storage location from getting displayed in CO06 !!

    Dear all -
    We have implemented ECC 6 recently & I have a doubt about restricting certain Storage Locations
    in CO06.
    I have 2 storage locations for a plant and would like to restrict it in CO06 one of the storage locations.
    Is there any other way by which I can RESTRICT certain storage locations from getting displayed.
    I am putting in Logistics Execution threat, with an anticipation thall ALL logistics module experts will be able to see this and respond.
    Thanks
    Arun
    Edited by: ARUN TULSI on Jun 25, 2008 10:14 AM

    Dear,
    System determine issue storage location from the material master, the value of the storage location of the BOM item, or the storage location from the supply area.
    Check in BOM component details storage location you have defined.
    Check production storage location from the plant segment of the component is taken into account for the use of MRP areas also. When planned order is being created for the superior assembly in a MRP area?
    Also check the Material requirements planning (PP-MRP)
    --> planning process
      --> BOM explosion and dependent requirements determination
        --> storage location determination for BOM explosion
    Regards,
    R.Brahmankar

Maybe you are looking for

  • Error when activate I/O: inconsistency DD - DB

    Hello gurus, I modified the IO 0COSTELMNT in Dev system, I added two custom IO as attributes. I modified the transfer rule and Communication Structure. I transported the modify with success and I load the master data in order to populate the new attr

  • Unable to Save Adobe Acrobat Form

    I have created a form in Adobe Acrobat Pro X and I set it to allow users to enter data and save it.  However, when they open the file and enter data it will not allow them to save the file. Any ideas? Thanking you in advance!!!!!

  • Backspace key not working

    Approx. a week ago my backspace key stopped working.  Haven't a clue as to why or what might have triggered this.  All other keys appear to work.  No other issues detected on my system.  Have tried reseating the key, air dusting the area, etc. HP Pav

  • Printing 4x6 photo in iPhoto Problem

    When trying to print a 4x6 in iPhoto, the print image is enlarged and cuts out the outer part of the photo. How can I get it to print the real size?

  • Time Machine Full! Need help!

    I have a FireLite hard disk backup connected via Time Machine and a USB port. I have been informed that the FireLite is full. I'd like to make room by deleting, say, half the earlier backups to make space for new ones. Is there a way to do this?