How to realize? - By changing tabs hidden some characteristics in DP...

Hi @ all,
first my situation:
I have two tabs with one dataprovider and the same query.
Now, I want to show different characteristics in each tab. How can I realize that?
Thanks for your answer...

Thanks for your answer, but now I have the problem that in query views you cannot navigate. If I open the Web-Template with the two tabs, I want to see the first one with a aprt of the characteristics from Data Provider. Then I navigate in this tab. Now, when I'm changing to the second tab, I want the navigation status from the first tab will shown in second tab and show some other characteristics.
I hope you understood me...

Similar Messages

Hello hi, i just won't to ask, if there has been any changes on how to find a stolen phone, did some one come up with a fare and good solution. as it is not fare at all when some one could use it for free and there is a lot of things could be done to this

hello hi, i just won't to ask, if there has been any changes on how to find a stolen phone, did some one come up with a fare and good solution, new Apps. as it is not fare at all when some one could use it for free and there is a lot of things could be done to this condition, no one seem to care,
i have a story about my sister, am talking on her behalf, she got stolen her phone at a caffee when she just come from a horeble exam, she was very mad and having haedace for not doing well at the exam, i ask her if we could have coffee before we go home, once she sate; while i was getting the coffee for her, some one snicked to her pocket and took the phone, immidatly she feelt it and went on to searching, but nathing was hopefull. what makes it more heart braking is that she worked day and night just to buy the phone and pay for her books and so on as a student. she use to work 16 houres a day before she had to start school. 8 houres in one place and then to the other place. and she was always demanding for more houres to work; one day her boss saw her on her other job and she was serprised to see her and saied OHhh my God Milly if you work like this, i wonder if you servive, how could you also ask for more houres, My sis had to do it she has no parents or any thing, well the phone was taken after only two months of having it. the sad thing is she stile dream having it even though she can't think of buying againe. well me i have tryed a lot of things but i know some were out there there is a solution for people like this, it is not always fare for some one who has payed up to 800 to just loose his ......
Thnks

I'm sorry, but your sister, unless she had already turned on the "Find my iPhone" feature and the person who took the phone has not disabled it, is out of luck. She should report the theft to local police authorities, including the serial number of her iPhone. While her experience is unfortunate, there are good reasons why Apple cannot do anything else about it.
I hope she gets her phone back.
Best of luck.

How to realize WHEN-RADIO-CHANGED- Trigger in ADF

Hy@ all,
I try to redevelop the Summit Forms Demo in ADF.
One of the existing modules is called "ORDER" and contains, among other things, radio buttons based on a database column(VARCHAR2) named PAYMENT_TYPE which contains the values CASH and CREDIT.
Based on this Item a WHEN-RADIO-CHANGED- Trigger is called which shows an alert and reset the changes to a default value when the payment type is changed but the credit rating(database column from another table) is not equal to an according value.
The code of the trigger is the following one:
DECLARE
     n NUMBER;
     v_credit S_CUSTOMER.CREDIT_RATING%TYPE;
BEGIN
     IF :S_ORD.payment_type = 'CREDIT' THEN
          SELECT credit_rating
          INTO v_credit
          FROM S_CUSTOMER
          WHERE :S_ORD.CUSTOMER_ID = ID;
     IF v_credit NOT IN ('GOOD', 'EXCELLENT') THEN
          :S_ORD.payment_type := 'CASH';
          n := SHOW_ALERT('PAYMENT_TYPE_ALERT');
     END IF;
     END IF;
END;
Now my questions are where to place the equivalent code(EO, VO, etc.?) and how to realize this.
Further, is it possible to roll out the trigger code to the database and then call this stored unit from "the right place"?
I´m using JDeveloper v10.1.3.1.0 and I´m pleased about any reply or solution.
Best regards
Chris

The answer will depend on how you are storing the parameter in your ADF application and when do you actually need it to be set and based on what.
This can be for example a property of a managed bean in your JSF application and you can initialize it either in the bean itself or in the faces-config.xml file as a managed property.
http://www.oracle.com/technology/tech/java/newsletter/articles/jsf_pojo/index.html

HT5824 I have hidden some of my music in the cloud and I want to get it back, how do I do that?

I have hidden some of my music in the cloud - how do I un do this so that I can hear it on my phone 5s again?

See http://support.apple.com/kb/HT4919. Also make sure in Settings>iTunes & App Store that Music is on under Show All.

How to change it if some data is wrong in ODS and infocube

hi all:
could you please tell me how to change it if some data is wrong in ODS and infocube ?
Best regards

You receive information on all requests that have run in the InfoCube and you can delete requests if required.
http://help.sap.com/saphelp_nw04s/helpdata/en/d4/aa6437469e4f0ae10000009b38f8cf/frameset.htm
Request ID you can find in administration of the InfoCube. If a cubes is compressed you can't delete requestwise...
Regards
Andreas

S:TextArea How change color for some chars in text?

I have s:TextArea and i need in runtime change color for some chars displayed in text.
How i must to do this correctly?

pcardinale wrote:
Initially, a control has no caption. It's not just that the caption string is empty and the caption not visible, but the caption object does not exist.
I think this should probably be changed in future versions, because even if each control had a caption, it would still be a negligible small part of the VI. The current behavior made sense many years ago where HD and memory space was very precious. Not any more!
This issue comes up often enough that it warrants addressing the root of the problem.
It is hard to convince the casual that the caption does not exist if he can simply do a "show caption" at edit time and it will show in all glory, even with the default set to the current label. It is confusing!
There is even an idea about this that seems worth supporting (also read the link in the discussion).
What do you think?
LabVIEW Champion . Do more with less code and in less time .

How come under the "Library Tab" some of the Presets effects show as empty Files thus rendering them unusable?

How come under the "Library Tab" when I select a specific Channel, some of the Presets effects show as empty files thus rendering them unusable?

No problem at all, thks for your reply. I did not download from the App Store. I bought the full Logic Studio software back in 2008 so I have all the disks.
I did look on the Library/Application Application Support/Logic/Plug-in Settings and there are 26 files listed and I recognize quite a few that i have been using that seem to work OK. But somtimes, as you know you can click on say, EFM1 but then by clicking on that, you have to choose another on of the option effects such as 07 Warped FM and then to Aqua Enchant befoer you can be finished selecting what you need. This is where I run into the lost content. Actually I have a book I' learning from called Logic Pro 8 Beyond the Basics and it hands on exercises to do, the books written well, and I'mn dong well with it, but if you have a major question you must ask, thats when I need help otherwise you can't proceed further.
But back to to The File incons Library/Application Application Support/Logic/Plug-in Setting yes, I do sse the 26 File Folders and the folder icon is Blue which looks correct, however, when I try to open those files, there appears to be no content inside of them. I'm not saying this is abnormal as I dont' really know, I'm just reporting back. So does this mean that the files are in fact missing content?
By the way, some of the plug in settngs in the Library work fine and those files show up as "blue" color but LIbray always lets me know when the files show a white "Zero." in the file.icon.

How to edit the shortcut to change tabs.

I am changing from Safari to Firefox, and I am used to the shortcut of (apple)+(shift)+(right) to change tabs.
I was looking for a way to change the default shortcut of (ctrl)+(tab) in firefox to the apple behavior.
Is there an easy addon/change so I can customize this behavior? Or will I have to look into writing/changing the basic code within firefox? If so, can anybody provide tips on how to do so?
thanks,
Kevin.

You might take a look at the Keyconfig extension to see whether it allows that: http://kb.mozillazine.org/Keyconfig_extension
If not, it is possible to dig into Firefox to hack this kind of setting, but such changes probably will not survive the next update. This thread discusses how you would do it: [https://support.mozilla.org/en-US/questions/926508 Making the Home/End keys work on Mac like they do on Windows/Linux].

OH-Edit Medical Service: How to change tab pages text

Hi All,
Is it posible to change TAB pages text in Edit Medical Serivce(EHSAMBTAET) like Protoco/GeneralExamination, Vaccination etc to some other text?
Thanks
Bhuwan

HI Dhaval,
Can you be more clear. At what point of time you want to change.
Thanks
Aravind

Changed Tab name is showing old name some times

Hi Friends,
I had successfully changed the enhanced tab name from the screen painter using translation and it also reflected in the transaction.
When i am going to another tab within the same screen, changed tab name 'Safety Inf' is again getting changed to old name 'Enhancemnt'. when i go back again to the enhanced tab, again my changed name is coming as 'Safety inf'.
User doesn't like this...
What could be the reason? any body has idea?
Regards,
Satish

Hi,
Nobody has any idea about this?
Regards,
Satish

How to restrict closing the tab in tabpane after clicking the close button.

Hi all,
Greetings.
I am implementing a TabPane with different 'user form's in each Tab. And all the tabs are *'closable'*.
If the user enters some data in the form, and tries to close the tab without saving the form , i need to show a confirm dialogue box that the user should go ahead or not.
If he clicks cancel, the tab should not close.
But currently i am searching for a method something like 'setOnClosing' method for tab.
There is only tab.setOnClosed() method, which will call the event after closing the tab.
Some thing the code is like below.
tab.setOnClosed(new EventHandler<javafx.event.Event>() {
 @Override
 public void handle(javafx.event.Event e) {
 // TODO: Actions to be taken on close of tab.
 // Logic to show the confirm dialouge box.
 // if YES - close the tab
 // if NO - don't close the tab.
});But my logic is executing after closing the tab. (ofcourse, as it is on setOnClosed() ;) ). Can anyone tell me how to get control before closing the tab ?
Thanks in Advance.
Sai Pradeep Dandem.

Hi All,
Finally I managed to get the handler before closing the tab pane. :)
Though this is a bit weird work around, my requirement is fulfilled at-least.
Let me explain the workaround I did.
Tab tab = new Tab(title);
tab.setClosable(false); // This line of code makes sure that the “default” close button of the tab is not appeared.
setClosableButton(tab);Then I am setting the custom close button as a graphic to the label ( Title of the tab), and aligning that graphic position to make an effect, that it is rendered exactly at the position of “Close” button.
From this Custom Close Button, I am handling the events and if confirmed I am closing the tab manually, by calling the closeTab() method in the TabPaneBehavior class.
Below is the code that is implemented as per the above logic.
 * Method to set the custom Closable Button to the given tab.
 * @param tab - Tab
 private void setClosableButton(final Tab tab,final boolean closeCheck){
 final StackPane closeBtn = new StackPane(){
 @Override
 protected void layoutChildren() {
 super.layoutChildren();
 // Setting the orientation of graphic(button) to the right side.
 ((Label)((LabelSkin)getParent()).getSkinnable()).setStyle("-fx-content-display:right;");
 closeBtn.getStyleClass().setAll(new String[] { "tab-close-button" });
 closeBtn.setStyle("-fx-cursor:hand;");
 closeBtn.setPadding(new Insets(0,7,0,7));
 closeBtn.visibleProperty().bind(tab.selectedProperty());
 final EventHandler<ActionEvent> closeEvent = new EventHandler<ActionEvent>() {
 @Override
 public void handle(ActionEvent paramT) {
 ((TabPaneSkin)TabPaneComponent.this.getSkin()).getBehavior().closeTab(tab);
 // Handler for the close button.
 closeBtn.setOnMouseReleased(new EventHandler<MouseEvent>() {
 @Override
 public void handle(MouseEvent paramT) {
 // My logic to handle the close event or not.
 if( logic satisfied){
 closeEvent.handle(null);
 }else{
 // Dont close the tab.
 // Showing the close button if the tab is selected.
 tab.selectedProperty().addListener(new ChangeListener<Boolean>() {
 @Override
 public void changed(ObservableValue<? extends Boolean> paramObservableValue,Boolean paramT1, Boolean isSelected) {
 if(isSelected){
 tab.setGraphic(closeBtn);
 }else{
 tab.setGraphic(null);
 }There are some drawbacks in the above code. In practice, it is suggested not to use the classes (*LabelSkin* & TabPaneSkin) that are in com.sun.javafx package. But I couldn’t get a better solution other than using those classes. And another one is I could'nt set the actual graphic for tab, as i am already using that graphic property to show the close button.
I would like to thank Narayan, for giving some inputs which has helped me to think and get the above solution. :)

How to create Customer data TAB in PO -ME23N

Can anyone tell me how to add 'Customer data' TAB in the PO heade TABSTRIP. I have to add it in the header besides 'Status' TAB.
I know an enhancement 'MM06E005' which is used for this purpose.
Thanks
SMS

Hi
see this sample doc and do it accordingly
by creating a project in CMOD and assigning the Enhancment MM06E005 and writing the code in the respective screen
How to implement screen exit for a SAP standard transaction
Introduction
SAP provides standard transactions to enter data into database. But a client may want to maintain some additional information in SAP other than what is provided.
To make provisions for this, additional screens have to be provided and additional fields must be added into appropriate database table.
To pave way for this, SAP has provided the option for screen exits. Usually, SAP provides the following:
An append structure in the database table with the new fields.
A subscreen area into the standard screen where the programmer can attach his subscreen of his own program with the new fields.
A function group under which the new subscreen has to be created with the new fields.
Function exits to synchronize the PBO and PAI of the standard SAP program with the PBO and PAI of the subscreen so that data can flow back and forth between the standard SAP program and the program written by the developer for the subscreen. These function modules also exist in the same function group under which the subscreen will have to be developed.
Finally, a linkage has to be done between the subscreen area of standard SAP screen with the custom subscreen constructed by the developer.
Typically, SAP provides an enhancement in which the developer can create an append structure, use the function exits to synchronize the PBO and PAI of the standard SAP program and the custom subscreen program, and make the necessary linking( as mentioned above in step 4. But, again, this is not a hard and fast rule. Linking in some case, is also done by configurations.) SAP also usually provides the name of the function group under which the subscreen has to be developed.
Necessary guidance about implementing a screen exit development is usually available in the Documentation section of the enhancement ( can be availed by transaction SMOD).
Pre-Requisites
The developer to work on screen exit should have essential knowledge on the following:
DDIC concepts, including the knowledge of append structure.
Concept of SAP Enhancements and implementing them using Projects.
Concept of function exits.
Knowledge on Module Pool including subscreens, Tabstrip controls etc.
Steps
Guidelines
So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
Find out the Required Enhancements
Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton SAP Applications. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest for e.g., Purchasing, Asset Accounting, etc.
Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
Utilize the Enhancement in a Project
After you have found one, do as directed in the documentation. Generally, the steps are as follows:
Create a project using CMOD including your enhancement.
Create the append structure with new fields.
Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
Activate the project.
Test to ensure that required functionality are met.
Case Study 1
Add three new custom fields for Asset master and maintain information for them
Requirement
Three fields in the legacy system have to be maintained in Asset master. These fields are:
Original Asset number 20 characters
Location 2 15 Characters.
Model no 20 characters
Location 2 should start with L.
Pre-Analysis
Finding out the Enhancement
As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
Studying the Function Exits
The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
EXIT_SAPLAIST_002
Function module Level Documentation
This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
Import Parameters
Understanding
This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
EXIT_SAPLAIST_003
Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
Understanding
This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
Studying the Documentation of the Enhancement
The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
Deciding the Final course of Action
After making all the investigations, the final course of action was determined.
SrlNo Step Justification
A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be CUST (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
In the PAI of the subscreen, validation for Location to start with L will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
In the custom include of the function exit module EXIT_SAPLAIST_002, the following code will be written:-
ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
In the custom include of the function exit module EXIT_SAPLAIST_003, the following code will be written:-
E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done otherwise, the new custom subscreen will not be displayed in the Asset master screens.
Development
Creating a Project to include the enhancement
Go to transaction CMOD and create a project.
Enter a description for the project. Then, click on the pushbutton Enhancement Assignments in the Application Toolbar.
Enter the name of the enhancement and Save.
Go to Components.
Creating Custom Include for ANLU
The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
Create the include structure with three new fields, as required. Then, save and activate it.
Develop the subscreen and the program
Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
Create it as subscreen.
Then, go to the Layout of the screen and create three new fields from Database table ANLU.
Drag the fields in the screen body and place them.
Then, save and activate the screen and come back to screen flow editor.
Create the PAI module to add validation for field Location 2, as required .
Activate the whole function group and come out.
Write code in the Function Exits to synchronize the programs
Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
Then, activate everything the whole project and come out.
Complete the configuration to link the subscreen
The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
Here, the requirement is to create these three custom fields in the tab page General of asset master screen ( AS01/AS02/AS03/AS91).
Determine the Layout
To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class 1000 and click on folder General Assignment of Layout.
Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout SAP cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
Create new tab layout
Go to transaction AOLA. Copy the tab layout SAP to create another layout, say, YSUB.
System will copy all the settings and will inform you about that.
Select your newly created layout and double-click on the folder Tab page titles.
You want to put your custom fields in the tab page General. So, select this tab page entry and double-click on the folder "Position of Groups".
Here, all the field groups currently residing in the tab-page General are shown. Add an entry for your newly created fields.
Select the group box from the list. An entry will come with U padded with the custom subscreen prepared by you.
Then, save and come out.
Assign the new Layout to Asset Class
Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
Save and come out.
Test the Exit
Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to themsave. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
Original Source: ittoolbox.com
Regards
Anji

I don't want Firefox as a homepage. How do I permanently change it?

I keep changing my home page from Firefox, but when I log on again I'm back with Firefox. I want to use Firefox but I want a different homepage. How do I permanently change it?

See these articles for some suggestions:
*https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
*https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
*http://kb.mozillazine.org/Preferences_not_saved

How checkbox "Item Partners" at Tab:Item- partners been activated?

Dear Gurus,
           I've a problem informed by user. She told me that she would like to change Ship-to Party from A to B. So she has changed Ship-to Party from A to B at header of sales order. The Ship-to Party at header has been changed from A to B but not applied to item. The Ship-to Party at item level still has been A.
            I've checked the log of changes in sales order. She has changed only Ship-to Party at header. It should be applied to item as well, right? The configuration doesn't support changing partner functions at item level.
            I've investigated the order and found that there is tick in checkbox "Item Partners" at partner function "Ship-to Party" in item level. I think it should be the cause of this problem. But I've no idea how checkbox "Item Partners" at Tab:Item->partners been ticked. Could anyone can explain me how it works and how I can solve this problem?

Hi,
You can change the ship-to-party at the item level also.It needs some configuration.
The path is:
SPRO>Sales and distribution>Basic functions>Parner determination>Setup partner determination.
In this click on "Setup partner determination for sales document item".
Click on partner determination procedure assignment.
Check what is the procedure assigned to your item category.
Click on Partner Determination procedures.Select your procedure and click on Partner functions in the procedure.
You will find ship-to-party there.Select that one and scroll right.There is a checkbox called as notmodifiable.It should be unchecked.If you want it to be mandatory then click on the checkbox mandatory.
Next click on partner functions.Select "SH" and scroll right.You will find a field called unique.Tick it if you want it to be unique.else untick it.
Regards,
Krishna.

Control/change tab order

How does one control the tab order (the order in which controls are visited when the TAB key is pressed) in a JavaFX 1.3.1 application?
It isn't always the case that one wants the tab order to be the same order as used in the layout.

Thanks a lot for your help guys.
Let me explain a little bit more my problem, maybe you guys get a good way to do this.
Ok, I have a tab control with 4 tabs (Auto Mode, Manual Mode, Troubleshooting and Configuration) in that order. In the "Auto Mode and Manual Mode tabs I have a selector switch to select the operation mode (auto or manual). Now, when I have the switch in auto mode, the manual mode tab page is hidden, when I change the selector switch to manual mode the manual mode tab page is unhide, the auto mode tab page is hide and the manual mode tab page is automatically selected. This happens because my manual mode page is the second one and when the page before is hidden the next one get active. The problem came up when I change the switch back to manual mode. I want that the auto mode page unhide, the manual mode page hide and the auto mode page get active, but instead the page that came active is the troubleshooting page since this is the one after the manual mode page.
So, what I was planning to do was to rearrange the pages order when auto or manual mode are selected so that the second page be always the hidden one.
Maybe I confuse you guys more, but that'sthe idea. If something came out of your mind, I really appreciate the help.
Ferdinand Martinez
FMO Automation LLC

How to realize? - By changing tabs hidden some characteristics in DP...

Similar Messages

Maybe you are looking for