How to realize select-option in screen

Hi,everyone.
in a report , i can define select-option in SELECTION-SCREEN .
how can i realize the similar function in a screen ?
ths!

Hi,
Check this sample program to define selection screen in dialog programming.include the selection screen in a subscreen and then include the subscreen in your screen.
report YS_SELECTION .
tables: mara.
Custom Selection Screen 1010
selection-screen begin of screen 1010 as subscreen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_rad1 radiobutton group grp1 default 'X',
            p_rad2 radiobutton group grp1,
            p_rad3 radiobutton group grp1.
select-options: s_matnr for mara-matnr,
                s_matkl for mara-matkl,
                s_mtart for mara-mtart.
selection-screen end of block b1.
selection-screen end of screen 1010.
start-of-selection.
call screen 100.
*&      Module STATUS_0100 OUTPUT
module status_0100 output.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
endmodule.
*&      Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
endmodule.
create   screen 100 and create a subscreen area called "subscreen_1010"
Screen Flow Logic follows
*process before output.
module status_0100.
call subscreen subscreen_1010 including sy-repid '1010'.
*process after input.
call subscreen subscreen_1010 .
module user_command_0100.
Laxman

Similar Messages

How to design select-option through screen painter

I am new to screen painter. I want to make a screen having range of values high/low (just like select-option)......How can I do this using screen painter?

Hi!
Method 1
a) Create a subscreen area in your screen layout where you want to create the select options.
b) In the top include of your module pool program declare a selection screen as a subscreen e.g.
       SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
             select-options s_matnr for mara-matnr.
       SELECTION-SCREEN END OF SCREEN.
c) In the PBO and PAI of the main screen where the select options needs to be created do a call subscreen of the above screen (100).
       CALL SUBCREEN sub_area INCLUDING
This call subscreen statement is necessary for transport of values between screen and program.
Note: All validations of the selection screen fields e.g. the s_matnr field created above should be done in selection screen events like AT SELECTION-SCREEN etc and not in PAI. These selection screen validations etc should be done in the top include only.
Method 2
a) Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
struc_tab_and_field-fieldname   = con_cust.      " 'KUNNR'
struc_tab_and_field-tablename = con_kna1.     " 'KNA1'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
          EXPORTING
          TITLE                   = ' '
            text                         = g_titl1                                " 'Customers'
            tab_and_field     = struc_tab_and_field
          TABLES
            RANGE                   = rng_kunnr
          EXCEPTIONS
            NO_RANGE_TAB          = 1
            CANCELLED                    = 2
            INTERNAL_ERROR     = 3
            INVALID_FIELDNAME = 4
            OTHERS                           = 5.
IF NOT rng_kunnr[] IS INITIAL.
         Read the very first entry of the range table and pass it to
         dynpro screen field
           READ TABLE rng_kunnr INDEX 1.
           IF sy-subrc = 0.
              g_cust = rng_kunnr-low.
           ENDIF.
You can use the return table rng_kunnr to populate your own internal range table with the values entered by the user. Basically here you are just simulating the work of a select-options parameter by module pool screen elements
You can go with it also ....
Re: Select-options in dynpro
Regards....

How to create select-options in my own screen?

Hi
I create my screen and i wish to place select-options on screen. how to do that?

There is no SAP standard way of creating select options on screen.However you can create your own select options by providing two fields on screen in which maximum and minimum values can be entered.
screen fields :
input1 : <minimum value>
input2 : <maximum value>
data :
range for <some field>
then you can fill a range with these values.For eg.
range-low = <low value input field>.
range-sign = 'I'.
range-option = 'BT'.
range-high = <high value input field>.
append range.
*Now write your select statement.
select * from <some table> where <field> in <range>

How to creat select-option on module pool screen???

Hi All,
please tell me how to creat select-option on module pool screen???
Regards
Deepak

Hi Deepak Kumar Sharma,
There are Two ways to achieve it...
1) How to create a select-options in a module pool screen.
Method 1
a) Create a subscreen area in your screen layout where you want to create the select options.
b) In the top include of your module pool program declare a selection screen as a subscreen e.g.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
select-options s_matnr for mara-matnr.
SELECTION-SCREEN END OF SCREEN.
c) In the PBO and PAI of the main screen where the select options needs to be created do a call subscreen of the above screen (100).
CALL SUBCREEN sub_area INCLUDING <program> <screen>
This call subscreen statement is necessary for transport of values between screen and program.
Note: All validations of the selection screen fields e.g. the s_matnr field created above should be done in selection screen events like AT SELECTION-SCREEN etc and not in PAI. These selection screen validations etc should be done in the top include only.
Method 2
a) Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
struc_tab_and_field-fieldname = con_cust. " 'KUNNR'
struc_tab_and_field-tablename = con_kna1. " 'KNA1'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
TITLE = ' '
text = g_titl1 " 'Customers'
tab_and_field = struc_tab_and_field
TABLES
RANGE = rng_kunnr
EXCEPTIONS
NO_RANGE_TAB = 1
CANCELLED = 2
INTERNAL_ERROR = 3
INVALID_FIELDNAME = 4
OTHERS = 5.
IF NOT rng_kunnr[] IS INITIAL.
Read the very first entry of the range table and pass it to
dynpro screen field
READ TABLE rng_kunnr INDEX 1.
IF sy-subrc = 0.
g_cust = rng_kunnr-low.
ENDIF.
You can use the return table rng_kunnr to populate your own internal range table with the values entered by the user. Basically here you are just simulating the work of a select-options parameter by module pool screen elements.
Also have a look on below threads
how to make select option in module pool
select option in module pool program
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

How to degin a select-option in screen painter?

Help me !
How can i create an object like select-option in screen painter.
I want to input a range ,but there are no button or text in screen painter like select-option?

hai u can create select options on screen but in little differernt way..
1st way : if u want to give only 1 interval then declare on screen as two different variables in same line
and after that append the value in ranges.
2nd way: here u can define as asingle input vriable beside that variable u can give a icon as extension in select option and give give some function code to that.if we click on that in user command write following code :
IF V_OKCODE = 'EXT'.
 CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
 EXPORTING
 TITLE = 'Title'
 TEXT = 'Text'
 SIGNED = 'X'
 LOWER_CASE = ' '
 NO_INTERVAL_CHECK = ' '
 JUST_DISPLAY = ' '
 JUST_INCL = ' '
 EXCLUDED_OPTIONS =
 DESCRIPTION =
 HELP_FIELD = 'T001W-WERKS'
 SEARCH_HELP =
 TABLES
 RANGE = R_WERKS
 EXCEPTIONS
 NO_RANGE_TAB = 1
 CANCELLED = 2
 INTERNAL_ERROR = 3
 OTHERS = 4
 IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
help field the field reference wich u want to declare and range is where values will be stored atomatically as in select options.
once we click the icon if we execute the function module a window will open as in selection option in reports.there user can enter the values.once the user enters the values it will stored automatically in ranges declared like r_werks in above example.
try it..

How to declare and work with select-option in screen painter?

hello there,
can anybody plz suggest me ,how to declare and work with select-option in screen painter?
neon

Hi Blue,
Please check these threads which will help you a lot..
module pool programming " to add selection-option on screen"
Re: Select option in Dialog program screen
Re: SELECT-OPTIONS in Screen
Good luck
Narin

SELECT-OPTIONS in Screen

Hi,
I am trying to create select - options in Screen , i.e. not the selection screen but a custom screen, say 9000. I can make the text boxes etc for having the select options. But How do I simulate the button wchich comes after select options. It would be used in dialogue programming with multiple screens having different reports.
Please reply to me urgently,
Thanks and Regards
Arnab Panigrahi

A few dot points:
1. You can have a select-option embedded in a dynpro, if you want, by using a subscreen. There's an example bit of code at
Module - pool Question..?
This would be easy to adapt to being a popup rather than a full screen if required.
2. As noted above, you can code your own select-options as in
Making a referenced field a range?
which I think Sesh has quoted from.
3. For the requirement you expressed initially, the code below should do the trick... you get a different block of extra selections depending on which radionbutton you select.
Jonathan
report zlocal_jc_radiobutton_hiding.
tables:
sscrfields.           "To allow trapping of Fcode on selection screen
selection-screen begin of block tot with frame.
parameters :
p_rb_01          radiobutton group rbg1 user-command zrb1 default 'X',
p_rb_02          radiobutton group rbg1.
selection-screen begin of block block1 with frame title text1.
parameters:
p_date                like sy-datum modif id bl1.
selection-screen end of block block1.
selection-screen begin of block block2 with frame title text2.
parameters:
p_time                like sy-uzeit modif id bl2.
selection-screen end of block block2.
selection-screen end of block tot.
*" Events:
initialization.
text1 = 'Enter a date'.
text2 = 'Enter a time'.
at selection-screen output.
perform at_selection_screen_output.
at selection-screen.
perform at_selection_screen.
*&      Form at_selection_screen_output
form at_selection_screen_output.
*" Hide the appropriate fields
loop at screen.
    if p_rb_01       = 'X'
    and screen-group1 = 'BL2'.
      screen-active = '0'.
    endif.
    if p_rb_02       = 'X'
    and screen-group1 = 'BL1'.
      screen-active = '0'.
    endif.
    modify screen.
endloop.
endform.                    "at_selection_screen_output
*&      Form at_selection_screen
form at_selection_screen.
*" trap the radiobutton
if sscrfields-ucomm = 'ZRB1'. "clicked Subtotal checkbox
*" if you want to trap this radio button press here
endif.
endform.                    "at_selection_screen

How to create select-options in module pool program

Hi
i am structed at this point could you please tell me
how to create select-options in module pool program

Steps to get SELECT-OPTIONS in module pool programs.
<li>. Start one dialog program with SAPZ_TEST.
<li>. Place the below code in the TOP include of the dialog program.
PROGRAM SAPMZ_TEST.
TABLES mara.
SELECTION-SCREEN BEGIN OF SCREEN 2100 AS SUBSCREEN.
SELECT-OPTIONS: matnr FOR mara-matnr.
SELECTION-SCREEN END OF SCREEN 2100.
<li>. Create one screen 2000 .
<li>. Go to Layout of the screen and Define subscreen area on the screen and Name it as g_subscreen.
<li>. Place the below code in the Flow logic of the screen.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN g_subscreen INCLUDING 'SAPMZ_TEST' '2100'.
PROCESS AFTER INPUT.
CALL SUBSCREEN g_subscreen.
<li>. Activate all.
<li>. Create Transaction code for the dialog program SAPZ_TEST.
<li>. Execute the transaction code. You will see the select-option like we see on Selection-screen.
I hope that it gets u clear idea.
Thanks
Venkat.O

How to make Select Options Mandatory?

Hi Guys,
              Can anybnody tell me how to Declare Selection Options for some of them mandatory.
Select-Options : v_PurOrg for EKKO-EKORG default '2000',
                         v_GRDate for Sy-Datum ,
                         v_GRPrd for MSEG-GJAHR.
         In these i have to make v_PurOrg Manadatory.
Thanks,
Gopi.

Hi Gopi,
In order to make select-options mandatory we add OBLIGATORY in the statement like the below.
Selection-Screen.
Select-Options : v_PurOrg for EKKO-EKORG default '2000' OBLIGATORY.
In this case, only the first option will have the default value of 2000.But if you want both the options low and high of select-options, means you have to add the below code in your program in the initialization event.
Initialization.
v_PurOrg-low    =   1000.
v_PurOrg-high    =   2000.
append v_PurOrg.
Hope this helps.
Please reward if useful.
Thanks,
Srinivasa

How to transfer select options variable

Hello:
I can pass parameter to parameter id such as p_fikrs, but how to transfer select options parameter to parameter id such s_fictr.
SET PARAMETER ID 'FIK' FIELD p_fikrs.
SET PARAMETER ID 'FIS' FIELD s_fictr.
SET PARAMETER ID 'FPS' FIELD s_fipex.
SET PARAMETER ID 'GJR' FIELD p_year.
CALL TRANSACTION 'FMRP_RFFMEP1BX' AND SKIP FIRST SCREEN.
Thank you very much!

Use SUBMIT with the following option
SUBMIT... USING SELECTION-SCREEN scr
Effect
When you execute the report, the system uses the selection screen number that you specify in the scr field. This must be a selection screen defined using the SELECT-OPTIONS, PARAMETERS and SELECTION-SCREEN statements.If you omit the addition, the system uses the standard selection screen 1000.
This addition allows you to start the same report in different situations, using a different selection screen each time.
Notes
The addition VIA SELECTION SCREEN determines whether the report is processed in the foreground or the background.
What happens if the required screen does not exist or is not a selection screen?
Screen 1000:
If you want to use the standard selection screen (... USING SELECTION-SCREEN 1000 or do not specify a ... USING SELECTION-SCREEN) addition, the system does not process a selection screen.
Other selection screens:
The system triggers a runtime error.
Hope dis helps,
Reward if it does

How to convert select-options into parameters

hi Abapers,
i have an urgent requirement, iwant to know how to convert select-options into parameters
on selection screen,is it possible to do.

TABLES: spfli.
SELECTION-SCREEN BEGIN OF BLOCK test.
SELECT-OPTIONS:
s_carrid FOR spfli-carrid NO INTERVALS NO-EXTENSION.
SELECTION-SCREEN END OF BLOCK test.
Greetings,
Blag.

How to pass select-option filed to Function Module Exporting Parameter

Hi,
    How to pass select-option filed to Function Module Exporting Parameter.
Thanks

Hi,
DATA: BEGIN OF ITAB5_WRK OCCURS 0,
        KUNNR     TYPE KNKK-KUNNR, "CUSTOMER #
        SBGRP     TYPE KNKK-SBGRP, "CREDIT REP
        KLIMK     TYPE KNKK-KLIMK, "CREDIT LIMIT
        NAME1     TYPE KNA1-NAME1, "CUSTOMER NAME
        SKFOR     TYPE KNKK-SKFOR, "TOTAL A/R
        AMT1      TYPE KNKK-SKFOR, "CURRENT
        AMT2      TYPE KNKK-SKFOR,                          "01-30
        AMT3      TYPE KNKK-SKFOR,                          "31-60
        AMT4      TYPE KNKK-SKFOR,                          "61-90
        AMT5      TYPE KNKK-SKFOR,                          "91-120
        AMT6      TYPE KNKK-SKFOR,                          "OVR 120
        BZIRK     TYPE KNVV-BZIRK,
      END OF ITAB5_WRK.
SELECT-OPTIONS P_COMP     FOR T001-BUKRS
SELECT KUNNR SBGRP FROM KNKK
         INTO TABLE ITAB5_WRK
         WHERE SBGRP IN P_REP
           AND KUNNR GE '0001000000'
           AND SKFOR NE 0.
LOOP AT ITAB5_WRK.
    DELETE ADJACENT DUPLICATES FROM ITAB5_WRK COMPARING KUNNR.
ENDLOOP.
PERFORM GET_CREDIT_LIMITS.
*=======================================================================
IF P_DIST NE SPACE.
    LOOP AT ITAB5_WRK.
      SELECT SINGLE * FROM KNVV WHERE KUNNR EQ ITAB5_WRK-KUNNR
                                  AND VKORG EQ P_COMP
                                  AND VTWEG EQ '20'
                                  AND SPART EQ '10'
                                  AND BZIRK IN P_DIST.
      IF SY-SUBRC EQ 0.
        MOVE KNVV-BZIRK TO ITAB5_WRK-BZIRK.
        MODIFY ITAB5_WRK.
      ELSE.
        DELETE ITAB5_WRK.
      ENDIF.
    ENDLOOP.
ENDIF.
*==============================================================
LOOP AT ITAB5_WRK.
    MOVE: 'F/S'            TO WRK-KKBER,
           ITAB5_WRK-KUNNR TO WRK-KUNNR.
    PERFORM AGING.
    ADD: W_SNFAE TO ITAB5_WRK-AMT1,
         W_SFAE1 TO ITAB5_WRK-AMT2,
         W_SFAE2 TO ITAB5_WRK-AMT3,
         W_SFAE3 TO ITAB5_WRK-AMT4,
         W_SFAE4 TO ITAB5_WRK-AMT5,
         W_SFAE5 TO ITAB5_WRK-AMT6,
         W_SFAEL TO ITAB5_WRK-SKFOR,
         W_SNFAE TO ITAB5_WRK-SKFOR.
    MOVE: 'SPEC'            TO WRK-KKBER,
           ITAB5_WRK-KUNNR TO WRK-KUNNR.
    *PERFORM AGING.*
    ADD: W_SNFAE TO ITAB5_WRK-AMT1,
         W_SFAE1 TO ITAB5_WRK-AMT2,
         W_SFAE2 TO ITAB5_WRK-AMT3,
         W_SFAE3 TO ITAB5_WRK-AMT4,
         W_SFAE4 TO ITAB5_WRK-AMT5,
         W_SFAE5 TO ITAB5_WRK-AMT6,
         W_SFAEL TO ITAB5_WRK-SKFOR,
         W_SNFAE TO ITAB5_WRK-SKFOR.
    MODIFY ITAB5_WRK.
ENDLOOP.
FORM AGING.
*CALL FUNCTION 'CUSTOMER_DUE_DATE_ANALYSIS'*
EXPORTING
      BUKRS             = P_COMP
      KKBER             = WRK-KKBER
      KUNNR             = WRK-KUNNR
      RASID             = 'FEND'
      KLIMP             = 'X'
    IMPORTING
      SFAE1             = W_SFAE1
      SFAE2             = W_SFAE2
      SFAE3             = W_SFAE3
      SFAE4             = W_SFAE4
      SFAE5             = W_SFAE5
      SFAE6             = W_SFAE6
      SFAEL             = W_SFAEL
      SNFA1             = W_SNFA1
      SNFA2             = W_SNFA2
      SNFA3             = W_SNFA3
      SNFA4             = W_SNFA4
      SNFA5             = W_SNFA5
      SNFA6             = W_SNFA6
      SNFAE             = W_SNFAE
    EXCEPTIONS
      NO-AGING_SCHEDULE = 1
      NO_TABLE_INPUT    = 2.
CASE SY-SUBRC.
    WHEN 1.
      MESSAGE E999 WITH 'PLEASE ENTER AGING SCHEDULE'.
    WHEN 2.
      MESSAGE E999 WITH 'DO NOTHING ??'.
ENDCASE.
ENDFORM.                    "AGING
Thanks

How to provide select-option in module pool programming

Hi all,
How to provide select-option in module pool programming.
If any body knows let me immediately.
Thanks
sudheer

Hi Sudheer,
Unfortunately there is no standard way of having a select-option in a module pool program.
What you can try is having two fields and creating a range in your program and populating the range at runtime with respective value and trying to simulate some functionality of the select-option.
Hope it helps.
Thanks, Debasish

How to use select options whitout ranges ie like parameter

how to use select options whitout ranges ie like parameter and pls send me the code on that
thanks
raja.

hi,
SELECT-OPTIONS : s_kunnr for kna1-kunnr no intervels.
eg: code
SELECT-OPTIONS : s_kunnr for kna1-kunnr no intervels.
data: itab type table of kna1 with header line.
select * from kna1 into table itab where kunnr IN s_kunnr.
rgds
Anver

HOW TO PASS SELECT-OPTIONS AS IMPORT PARAMETER TO A CLASS

Hi experts,how to pass select options value as a export parameters to a zclass.
can give me some idea.
Thanks
sai

As Sachin already said, selection options are stored in an internal table. You can reconstruct the table type without the corresponding input fields using the type addition RANGE OF.
So - assuming you have the following in your program:
DATA: wa TYPE sflight.
SELECT-OPTIONS so_car FOR sflight-carrid.
you can create a publically-visible type in your class using direct type entry and the code
TYPES: my_selectoption TYPE RANGE OF sflight-carrid.
and use this to define the importing parameter of the method.
The only other thing you have to remember is that select-options generates an internal table with header line. Thereore, to pass the table to the method, you would use (in the above example) so_car[], and not just the name of the select-option.
Hope this helps.
Regards
Jon.

How to realize select-option in screen

Similar Messages

Maybe you are looking for