How to rearrange data in a spreadsheet type of view?

I would like to change the way my data is displayed. I don't know how to change it since it is grouped by month.
Here is what my preview is now...
I would like it to look like a spreadsheet layout like this...
Can anyone help me with this?

Abhilash,
I am still unable to create the crosstab you have suggested. I guess I need a little more detailed information.
Here is what I am looking at.

Similar Messages

How to retrieve date from a set type in SAP CRM in BRF+ application

Hi,
Can anybody please let me know how can I retrieve date from a set type in SAP CRM to BRF+.
I need to process the data in BRF+ and then send it back to CRM. Thanks.
Regards
Yogesh

Hi Manish,
From my experience, you cannot change an existing attribute of a set type (esp. when it has a dependency).
You need to delete the attribute, save the changes and then re-create the attribute with new value table.
Also remove any dependencies before deleting the attribute.
Regards,
Vartika

How to assign Date Rules to Duration Types?

Hi gurus,
can someone kindly point where in Customizing do I assign a newly created Date Rule for a custom Duration Type? I created a new Date Rule to calculate the duration between two Date Types, but as I was creating my Date Profile i couldn't see any configuration to assign Date Rules to Duration types (in contrast, you can directly specify which date rules to use per Date type).
Regards,
Marc

Dear Experts,
Can any one let me know in inicident management process in sap crm 7.02 EHP2.
I do not see any entry in the first response by and due date by fields
please advise.
1.I am populating the SLA based on categorizations, in cat schema I have assigned the service product which has the service profile and the response profile.
2.please also let me know availabilty times should only be set for service provide BP or it should be for sold to party and the requester BP as well.
3.also once I enter the requestor the customer (sold to party) entry pops up but the system also suggest the requestor as well as sold to party... please let me know where am I wrong.
4. I have not touched the middleware part, however I see an error" document is being distributed changes cannot be possible" when I try to edit any incident, RFC or Knowledge article.. please guide me some steps to fix this.
5.what are the replication objects I need to consider if ineed to integrate the HR and FICO with SAP CRM.
from HR I need org structure and Employee master .
From FICO : ASsets please advise.
Appreciate if any one could answers these quieries.... thanks in advance.

How to read data from select Options in another view without using context

I have 2 views, one for selection screen and another for displaying result.
In selection screen view I have define a select options with the help of webdynpro component.
Now my object is display result in result view based on entry of selection screen.
I don't want to do binding in context node, without that how I can read data of select option
in result view?
Regards,
Rasmi Ranjan Mishra

Solve by own.
If I define the Select options in component controller, then it will be global in nature. so i can get the value of select options
in another view also.
Regards,
Rasmi Ranjan Mishra

Extracting data from xml spreadsheet for JSP

Hi,
Currently i am developing a web application where user can upload a MS excel file, then the application will extract data needed and store into database. But facing problems where those excel files may content massive images that make the file size too large to be upload on to the web. Now i try to export those excel files into xml spreadsheet, to get only text data. Need helps on how to extract data from xml spreadsheet. Which API needed?
Thanks

Without getting into too much detail, a DTD defines the elements that can appear in an xml file, the order they can appear in, which elements can be nested within which other elements, what each element can contain, etc, etc. In short, a DTD defines the structure of the xml file and Microsoft defined a DTD for the xml files that are output by Excel.
This is not taken from an xml file produced by Excel but DTDs look a llittle like this very basic example.
<!DOCTYPE note [
<!ELEMENT note (to,from,heading,body)>
<!ELEMENT to      (#PCDATA)>
<!ELEMENT from    (#PCDATA)>
<!ELEMENT heading (#PCDATA)>
<!ELEMENT body    (#PCDATA)>
]>If you open the one produced for you by Excel in Wordpad or another simple text editor, you may see something like this in there.
However, if you are going to use a parser to access the file for you do not worry about getting to grips with DTDs for a short, simple project.

How can I use "write to spreadsheet" during the data is taking but not the end of all the loops

Hi,
I have to run an experiment on Labview 6 or 5. I don't have Labview 7 on that computer for some reason. My experiment is talking about 1000 hours, and I have a probelm on storing the data. Right now I am using "Write to spread sheet" and I set the "append" to false. And the data is installed at the end of the experiment, that means after 1000 hours. In the mean time if somthing oges wrong like power cut or what, I will lose all the data. So what I want to do is to save the data evertime when the data is took. I tired to set the "append" to true, but it does not let me to choose the "file path"--- when I choose this and select write on new or excisting file, it said" you may not be able to save on a exciting file" and it does not let me create a new file either. If anyone have the lidea like how can I use the "wrtie to spreadsheet" function and at the same time can install the data everytime inside the look, please let me know. Thanks alot.
KL

KL,
It sounds like you want to periodically save your data so it is in smaller files. (great idea) For this operation you will not want to append the data...if something happens to your system while the file is open it could become corrupt and ruin all the data. You need to write the new block of data to a new file every time. Now...this depends on how big your data is...if you only have like 500k of data to write in a block you should probably write several blocks before starting a new file. I don't know enough about how much data you are acquiring. In either case...the write to spreadsheet file.vi will need a different name each time it is called and you will not want to append. Append = false.
-Brett

How to get data type of variable in program..

Hi ABAP Guru.
I need to know how to get data type of variable or any structure field.. because I got short dump when use command REPLACE ALL OCCURANCE ... with variable/structure field that has data type I or P, I think it should be used with data type CHAR only, So I need to check the data type first.
Please give me your advice
Thank you all.
Nattapash C.

data : v_value type i,
v_char(10) type c.
v_value = 10.
move v_value to v_char.
REPLACE ALL OCCURRENCES of '#' from v_char....
Best regards,
Prashant

How to change data type of attribute in caf

hi.
this is my problem.
i been added a attribute in an entity service called emloyee. named "Birthday", use the data type "com.sap.caf.core.date".
when i tried modify the entity service, i hit exception about "DST Daylight Saving Time".
because of DST, the date will add an hour such like "1957/04/01 00:00:00.0" to "1957/04/01 01:00:00.0", and com.sap.caf.core.date will throw an exception.
is anyone had same problem like me?
how to fixed it(if passable)?
and, how to change data type?
thanks.

Hi Sruthi,
all you need to do on this is open the report go to the parameters, select the parameter that you wish to change and click "Edit". This will allow you to change thefield to a date rather than a date time.
Regards,
Noel

How can I get rid of a type generated by the Data/Services return type wizard?

Hi All,
I have a JSON service that returns an object called "error". The Data/Services "Configure Return Type" wizard automatically turned this into a class "Error".
However, this caused over a hundred errors to show up inside the generated classes, "Call to a possibly undefined method Error." That's because of lines like this:
throw new Error(propertyName + " is not a data property of entity Agreements");
It's trying to throw a regular "Error" object, but now that there's an "Error" class in the same package, that is taking precedence--and that Error object doesn't have a constructor with a single parameter. At least, that's what I think is going on.
I tried to fix it by deleting _ErrorEntityMetadata.as, _Super_Error.as, and Error.as from the valueObjects package. I then opened the FML file and deleted the definition for the entity "Error" and every reference to the Error entity (class) in my FML file.
I then changed my JSON service so that it returns an object called "serviceError" instead of just "error".
But, whenever I re-run the "Configure Return Type" wizard, it regenerates the Error class, even though I've deleted it from everywhere I can find it. That breaks my project completely! How can I end this and get Flash Builder to *stop* generating this type!
In the "Configure Return Type" wizard I very carefully inspected the type of every bit of data coming back to make sure none of them show up as type "Error." And they don't (as expected, since I changed the object's name to serviceError--now the type of that object is ServiceError.
-Josh

I think you are facing this known issue https://bugs.adobe.com/jira/browse/FB-29770
Please vote it.
Thanks for the link--I just voted for it.
To avoid this, in the last page of "Configure Return Type", edit return type name to something else (You can also edit subnodes's name too in the wizard).
Actually, that's exactly what I saw doing; I apologize if that wasn't clear in my post.
I closed and restarted Flash Builder, and once I did that Flash Builder stopped generating the Error class. My guess is that the FML file, even though I had updated it (by deleting all references to the Error class), was cached in some fashion by Flash Builder, and restarting Flash Builder forced it to reread the FML file?
Additional point of clarification: my understanding is that the FML file stores all the metadata about the services that Flash Builder has been able to figure out so far, and when you run the Configure Return Type wizard, it will regenerate *every* type in the FML file, even if that type is not mentioned anywhere in the particular return value that you are working with.
Edited to provide additional thoughts on FML file.

How can you save data to a spreadsheet and use different worksheets in the spreadsheet?

I am trying to save data to a spreadsheet.
Each set of test data needs to be saved under a different worksheet. Is this possible and how can I do it?

As the example that Dennis pointed out, this can be done using activeX. In addition to that example I have another that demonstrates how to create a new workbook with multiple worksheets and save data to each of them. I hope that between the two you can get an idea of what to do.
Brian
Attachments:
xlexample.vi ‏66 KB

How to crete data type from XSD

Hi All,
can anyone tell me ...how to create data type from agiven xsd.
I need urgently....
thanks in advance....

import this XSD, load this in your mapping editor and then use this to crate the datatype manually.
Or, use XML spy, load this XSD and then you should be able to see the Structure, or,
Look into the XSD data and decipher things yourself
Regards
Bhavesh

How to put continuos (desired format) of dates in numbers spreadsheet and how to do it? please reply asap i need it..

how to put continuos (desired format) of dates in numbers spreadsheet and how to do it? please reply asap i need it..

This is the definition for "continuo" from Apple's dictionary:
continuo |kənˈtinyəˌwō | (also basso continuo) noun (pl. continuos) (in baroque music) an accompanying part that includes a bass line and harmonies, typically played on a keyboard instrument and with other instruments such as cello or bass viol.
Presumably you mean something else. Your chances of getting replies that can help you will improve with a clearly stated question.
SG

How to convert data buffer of type "oracle::occi::OCCI_SQLT_NUM" to double

Hello All,
I am using bulk reading by utilizing 'setDataBuffer()' method call and fetching N records at a time.
It works well for fields of Oracle type VARCHAR, when I set
h5. rs->setDataBuffer(col, buff, oracle::occi::OCCI_SQLT_CHR, size, lens, inds);
and later iterating and interpreting data within 'buff' like this:
h5. char* text = ((char*)buff) + size*i; <-- length is in lens array
When the column's data type is NUMBER however, I am stuck.
Indicating that data type to data buffer works well:
h5. rs->setDataBuffer(col, buff, oracle::occi::OCCI_SQLT_NUM, size, lens, inds);
I would like now to extract a value of c++ double type from that buffer.
But I do not have an idea how to handle data within buff. I suppose it should have NUMBER stored inside in some internal format (just as described in Oracle® C++ Call Interface Programmer's Guide, section 'Description of External Datatypes', NUMBER)
Gestures like casting to double or trying to interpet the buffer's inner as oracle::occi::Number do not produce sensible results.
Could you help me to understand how can I obtain the double value from that buffer in a bulk read?

I have the following code which has been working for me.
showln ("Array Fetch");
sql = "SELECT c1, c2, c3, c4 FROM nd17_otab";
stmt->setSQL ( sql );
OCCIResultSet *rs = stmt->executeQuery();
rs->setDataBuffer (1, num, OCCIINT, sizeof(ub4), lenC1);
rs->setDataBuffer (2, flt, OCCIBFLOAT, sizeof(float), lenC2);
rs->setDataBuffer (3, dbl, OCCIBDOUBLE, sizeof(double), lenC3);
rs->setDataBuffer (4, str, OCCI_SQLT_CHR, CHRS, lenC4);
if ( rs->next(ROWS) )
show ("Number of Rows Fetched: ") << rs->getNumArrayRows () << endl;
showln ("Fetched Records");
for (int j = 0; j < ROWS; j++ )
show ("C1: ") << num[j] << endl;
show ("C2: ") << flt[j] << endl;
show ("C3: ") << dbl[j] << endl;
show ("C4: ") << str[j] << endl;
stmt->closeResultSet(rs);
c1, c2, c3, c4 columns in table nd17_otab are of type NUMBER, BINARY_FLOAT, BINARY_DOUBLE & VARCHAR2

How to Download data - exceeding 65000 rows into multiple spreadsheet

Hi all,
I am having some issues with the download.
The user is trying to download certain reports generated in the application into an excel sheet. He is not able to download beyond 65000 records. What I need is a way to automatically download the data into multiple spreadsheet if it exceeds 65000 rows (limit for excel 2000).
Please let me know if there is any web service which does this or any other solution to this problem.
Regards,
t

Hi Arie,
thank you for your suggestion.
I am using almost a similar procedure to download the records into excel. But the problem is its only downloading 65000 records because of the limit excel has.
I am pasting the code which will give you a idea.
It would be great if you help me modifying the code such that if the records exceeds 65000, remaining data gets downloaded to sheet2.
for example if there are 70000 records, the first 65000 records gets loaded into sheet1 and remaining 5000 into sheet2.
begin
-- Set the MIME type
owa_util.mime_header( 'application/octet', FALSE );
-- Set the name of the file
htp.p('Content-Disposition: attachment; filename="emp.csv"');
-- Close the HTTP Header
owa_util.http_header_close;
-- Loop through all rows in EMP
for x in (select e.emp_id, e.s_id, e.emp_number
from test2_csv_download1 e where rid between 1 and 65000 )
loop
-- Print out a portion of a row,
-- separated by commas and ended by a CR
htp.prn(x.emp_id ||','|| x.s_id ||','||
x.emp_number || chr(13));
end loop;
-- Send an error code so that the
-- rest of the HTML does not render
htmldb_application.g_unrecoverable_error := true;
end;
thanks
T

How to check data type of the field symbol at run time

Hi,
My code is as following:
      LOOP AT <fs> ASSIGNING <wa_covp_ext>.
        ASSIGN COMPONENT 86 OF STRUCTURE <wa_covp_ext> TO <f_zzname>.
        IF sy-subrc = 0.
          ASSIGN COMPONENT 158 OF STRUCTURE <wa_covp_ext> TO <f_pernr>.
          IF sy-subrc = 0.
              SELECT SINGLE sname INTO <f_zzname> FROM pa0001
                            WHERE pernr = <f_pernr>
                            AND endda GE sy-datum
                            AND begda LE sy-datum.
         ENDIF.
      ENDIF.
    ENDLOOP.
This query is giving dump when <f_zzname> is type P length 8 and decimals 2, because it tries to put PA0001-sname into it which is type C length 30. So I want to check the type of <f_zzname> before the select statement. If it is character 30, then I will write the select statement else not.
How to check data type of the field symbol at run time? If it's not possible, then can somebody suggest a workaround? Thanks.

check this ...
write describe statement ...
field-symbols : <f_zzname> .
data : sname like pa0001-sname,
       typ(10).
assign sname to <f_zzname>.
describe field <f_zzname> type typ.
write : typ. <-- typ contains character type in this case ..
U can check if typ is of character(C) if so .. write the select statement ...

How to rearrange data in a spreadsheet type of view?

Similar Messages

Maybe you are looking for