How to reassign a resource to a User
I use "access policy" and "Membership Rules" to bulk assiagn resource to users.
now some users' resource are "provisioning" (because Task "System Validation" status is "Pending")
QUESTION:
Now I want to know how bulk reassign the same resource to the user ? (the task "System Validation" of resource can not retry )
The reason the System Validation is not complete is because something on your process form did not get populated that was required. If you have a required field that was not populated, then the System Validation is not complete. You will want to go through and find all the user's that are in Provisioning state for this resource, and using the APIs, use the setProcessFormData API to set the correct data which will save the form and trigger the appropriate task as long as you provided the correct information.
You should not just reprovision the object again, you should fix the issue.
-Kevin
Similar Messages
-
Define resource for Anonymous user in OES
Hi all,,
I am using wls-ssm.
By default, OES protect all resources from our application.
how to define some resources for anonymous user?
With Regards,
WPYou can either define an OES policy to GRANT allusers group which includes anonymous or you can look at deploying this custom authenticator which will exclude WLS resources that typically rely on anonymous user:
https://oes-sspi-providers.samplecode.oracle.com/ -
How to de-provisions user's resource when the user is disable ?
When a user is disable in OIM, I would like OIM to de-provisions all the user's resources.
Is it possible to do it and how to do it ?Hi Deborah,
I have tried the following configuration, but i am unable to de-provision the resource for the user. The Delete User task is not getting called. Here are the steps that i have followed.
1) Created a Disable User task with conditional checked and Task Effect as Disable.
2) Added a adapter to it, and in the response tab added a new response COMPLETE (adapter will be returning COMPLETE) and given the status for the response as Cancelled.
3) In the Undo/Recovery tab, added the Delete User task.
4) In the Task to Object status mapping, given Revoked for Object status for the Cancelled status.
As per the OIM document the Undo tasks are triggered when the current process task status is Cancelled, but still i found that the undo task is not getting triggered. I have made both Disable and Delete User task as conditional. Also i have added the Delete User task under Undo/Recover tab of Create User task. Can you tell me why the Delete User task is not getting called. Here the user is also not getting deleted from OIM.
Also all the tasks in the resource object are showing the status as Cancelled.
I have created a simple Mobile Phone resource object and done all these steps. Can you tell what went wrong. If i directly deleted the user from Admin console the Delete User task is getting called and user is also getting deleted. -
How to get the list of IDM users in a workflow.
Hi,
I wanted to get the list of IDM users in a workflow into a list.Now I tried to use getObjects Method,I do not have the display session here,I passed the workflow context or WF_Context.But it is giving exception like context null .
I used the same method in a form and it worked.How can I get the list of users in a workflow.It is for customizing reports.
Thanks and Regards,
Pandu
Any Idea on how to customize reports including attributes from resources and auditing attributes etc.Any help would be really great.
Thank you.Hi John,
I get this exception WorkItemForm: no id.
This comes when I click on the other column.I generate the data needed in a report and display it as a sorting table when I get the data.
I want to give the user ability to sort data by different columns.But when I click any column I get the exception
WorkItemForm: no id
How can I save a workitem on a manual form before invoking it from a manual action.
Here is the code snippet
<Field name='tblUsers'>
<Display class='SortingTable'>
<Property name='selectEnable' value='false'/>
<Property name='align' value='left'/>
<Property name='linkEnable' value='false'/>
<Property name='sortEnable' value='true'/>
<Property name='width' value='400'/>
<Property name='columns'>
<List>
<String>Account id</String>
<String>First Name</String>
</List>
</Property>
</Display>
<FieldLoop for='row' in='_searchList[*]'>
<Field name='enduserId'>
<Display class='Label'>
<Property name='value'>
<block trace='true'>
<invoke name='getAccountId'>
<ref>row</ref>
</invoke>
</block>
</Property>
</Display>
</Field>
<Field name='lblfirstname'>
<Display class='Label'>
<Property name='value'>
<invoke name='getAttribute'>
<ref>row</ref>
<s>firstname</s>
</invoke>
</Property>
</Display>
</Field>
<FieldLoop> I think I may need to save some workItem,That is why this may be giving the error.How can I correct this.
Thanks,
pandu -
How to find the list of all user exits modified by the users
How to find the list of all user exits using by in R3
Hi Mohamed
You use Solution Manager to do the comparison for you. There are some nice features that will highlight all your customised coding. Have a look at the SolMan resources on the Support Portal e.g. using SolMan for upgrade comparisons.
Rgards
Carl. -
How to find the maximum no of users logged in Database
Hi All,
How to find the maximum number of users logged in database at particular time? I can find currently logged users or umber of sessions running on Database but I wanted to find at what time maximum number of users or sessions connected to the DB? is that possible? if yes please help me. thanks.Vijay wrote:
Hi All,
How to find the maximum number of users logged in database at particular time? I can find currently logged users or umber of sessions running on Database but I wanted to find at what time maximum number of users or sessions connected to the DB? is that possible? if yes please help me. thanks.
select * from v$resource_limit;Lists about 20 different resources with current, maximum and limit on usage. Session count is one of them. I don't think there's any (simple, efficient) way to determine the maximum number of different users of sessions, though.
Regards
Jonathan Lewis -
Resource deleted, but user still has resource linked when viewed in debug
Hi all,
I'm facing an issue on unlinking user accounts on a deleted resource. I deleted a resource from the Resource Action tab but still able to see the resource linked to users from the Debug page. I tried to search for users under the Find Users tab, but the resource doesn't appear in the list for selected resource. I looked at the debug page for users on that resource and the resource still shows up under the <Services> and <ResourceInfo> tags.
Can anyone share their expertise/solution on how to rectify this? Do I have to do a bulk action of unlink to unlink/unassign the resource from the user and if so what would be the command?
Your help is much appreciated. Thank you!I feel there is no need to refresh each and every object just for this.... as and when there would be any operation on the user object the unwanted references would go away...
Still if you want to to do it then you can use the refresh users (search the forum). I know there is one simple XML which you can execute from the lh console or there is also a workflow which you can run to do the job... -
How to reassign faces in aperture?
I accidentally assigned a person's photo to the wrong face in aperture and now I cannot figure out how to reassign. Please help!
To change just one Face Label mis-assigned to a Postitioning Box:
To rename a person in an image
Select an image containing the face of a person you want to rename.
Click the Name button in the toolbar.
Select the face label for the person whose name you want to change, and enter a new name in the text field.
This is from the on-line Aperture User Manual, which is better than most, and well-worth getting familiar with.
Feel free to ask here as well . -
Provision a resource to a user using a workflow
Hi all,
Please tell me how can i provision a resource to an user through a custom workflow.{noformat}Hi [~frogger123]{noformat}
<Activity id='1' name='act2'>
<Action id='0' name='Checkout' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='checkoutView'/>
<Argument name='type' value='Provision'/>
<Argument name='id' value='$(UserId)'/>
<Argument name='subject' value='configurator'/>
<Argument name='authorized' value='true'/>
<Return from='view' to='user'/>
</Action>
<Action id='1'>
<expression>
<block>
<set name='assignRoleList'>
<appendAll>
<ref>assignRoleList</ref>
<s>Role1</s>
</appendAll>
</set>
<set name='user.waveset.roles'>
<filterdup>
<filternull>
<appendAll>
<ref>user.waveset.roles</ref>
<ref>assignRoleList</ref>
</appendAll>
</filternull>
</filterdup>
</set>
</block>
</expression>
</Action>
<Action id='3' name='CheckIn' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='checkinView'/>
<Argument name='view'>
<ref>user</ref>
</Argument>
<Argument name='subject' value='configurator'/>
<Argument name='id' value='$(UserId)'/>
<Argument name='authorized' value='true'/>
</Action>
<Transition to='act3'/>
<WorkflowEditor x='103' y='10'/>
</Activity>
is this correct?
i could import this and even run the workflow ....but the resource doesnt get assigned. -
How can we identify what are all user exits are there for sales orders,deli
Dear All,
How can we identify what are all user exits are there for sales orders,deliverys and invoices
thanks
nitchel vHi Nitchel
There are many ways to find out the user exits..
For example for VA01.
Goto Transaction ie VA01:
goto System-- Status
doubleclick on the program name ie SAPMV45A
SE38 -> Enter the program name and in the program( SAPMV45A) goto -- attributes
get the package name from here ie VA
note the package(VA) and get back to main screen
goto SMOD tcode and click on find button in the package spec giv the package name ie VA and execute it
you will find list of exits available
check out the exit that suits ur requirement
goto cmod and create a new project and implement in that user exit.
You will get the following exits in SMOD..
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly
V45L0001 SD component supplier processing (customer enhancements
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing
For Delivery you will get .. here the package name will be VL.
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (h
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
For Billing VF01..Package is VF..
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
Or another way is ..
- Get the program name for that T-Code
- Go to that program
- In that program, search for word 'EXIT' or 'CUSTOMER-FUNCTION' by using where-used list which will give u the list of user exits for that program
And also you can check in the tables in SE16 for user exits..
MODSAP - Stores SAP Enhancements
MODSAPT - Stores SAP Enhancements - Short Texts
MODACT - Stores Modifications
And there are other ways as well , pls check the forum for this ,
Regards,
Vvieks
Note : If you have any specific requirement then pls let us know , we will guide you -
How to reassign a workflow task which has been already acquired
Hi,
I would be glad if anybody could explain how to reassign a workflow task which is been acquired by one user to another user. I am getting Worklist Service Task Update Error when I am trying to change acquired by field and update the task.
Thanks,
MythiliI can use delegateTask() if the context belongs to the person who acquired the task but I want to delegate a task to different person even if it is not me who acquired the task.
My second question is when should I set Assignees for a task?Is it when a person acquires a task for the first time or do I need to specify it in some configuration file, so that every task that is created newly will have a set of assignees by default.
Thanks,
Mythili. -
How can give only select privilge to user
hi all
how can give only select privilge to user
"connect" have many sytem privilge such as
alter session,
create cluster,
create database link,
create sequence,
create session,
create synonyms
create table,
create view,
"resource" have many sytem privilge such as
create cluster,
create indextype,
create operator,
create procedure,
create sequence,
create table,
create trigger,
create type
i want give only select privige to userafzal wrote:
hi all
how can give only select privilge to user
"connect" have many sytem privilge such as
alter session,
create cluster,
create database link,
create sequence,
create session,
create synonyms
create table,
create view,
"resource" have many sytem privilge such as
create cluster,
create indextype,
create operator,
create procedure,
create sequence,
create table,
create trigger,
create type
i want give only select privige to userFirst of all, SELECT privilege is OBJECT type of privilege. It is not a SYSTEM privilege.
Some of the examples for granting this priv I have mentioned below:
Examples
Suppose you own emp table. Now you want to grant select privilege on this table to other user “SAMI”.
grant select on emp to sami;Suppose you want to grant select privilege on emp to all other users of the database. Then
grant select on emp to public; -
How do I add resources as a meeting room to iCal?
How do I add resourcas as a meetingroom to iCal?
An iPad is not a multi-user device and does not support separate user accounts. You can go to Settings > General > Reset > Erase All Content and Settings, and set it up as your own.
-
How do I transfer Pages from one user account to another
How do you transfer Pages from one user account to another on the same Mac?
Welcome to the Apple Support Communities
If you haven't modified anything, Pages is installed on /Applications. All users have access to this folder, identified as "Applications" on the Finder sidebar, so you don't have to move anything, because Pages will work on all your users.
If you have installed Pages on ~/Applications (being ~ your user folder), then you have to move Pages to /Applications. After doing this, you will be able to access to Pages on all users -
How to maintain budget in 2006 when user in 2008 & vice versa? frame 1 y
Problem:
User could not save changes in original budget in 2006 & in 2008 also.
Description
When user tried to change original budget (FR04) in 2006 year,
then getting a Message on screen
Payment for yearly budget 2008 samller than distrubuted budget
with fund center commitment item list &
Payment for the annual budget 2006 are less than annual release
with fund center commitment item list.
User add & release fund in specific fund center-commitment item which was showing in error list.
After the check-
then getting error Payment for yearly budget 2008 samller than distrubuted budget
with fund center commitment item list
Time frame only shown 2006.
Here how to maintain budget in 2008 when user in 2006?
In Next step
When user tried to change original budget (FR04) in 2008 year,
then getting a Message on screen
Payment for yearly budget 2008 samller than distrubuted budget
with fund center commitment item list &
Payment for the annual budget 2006 are less than annual release
with fund center commitment item list.
User add & release fund in specific fund center-commitment item which as showing in error list.
After the check-
then getting error
Payment for the annual budget 2006 are less than annual release
with fund center commitment item list
Time frame only shown 2007 2008 2009.
here how to maintain budget in 2006 when user in 2008?
Means user can only change budget in 2007 to 2009 when more years coming in timeframe.
Current year :2008
Closed year: 2006
In Fund Management, need change original budget payments in 2006 which is already closed.
Purpose:
Maintain the positive budget in fund center -Commitment item in 2006 & in 2008 which is shwoing in error.
Can we see past-current timeframe at the same time ?1. copy the frames of your looping animation.
2. create a new movieclip and paste those copied frames onto
this movieclip's timeline
3. from your library drag a copy of the above movieclip to
frame 1 of your main timeline and attach a stop() to that frame.
4. place your login textfield and ok button on frame 1 of
your main timeline.
5. when ok is pressed (and login) passes some condition
direct your main timeline to frame 20.
Maybe you are looking for
-
Ken Burns Effect Pollutes Everything
If you're putting together a slideshow, do not turn on the KB Effect for anything. Ever. I hate to say this, for I love this feature. It has enhanced many of my slides. However, it's a sorcerer's apprentice. It causes nightmares once it's in your tim
-
Unable to view tables in Oracle BI Answers
Hi, I am able to view my subject area in Oracle BI Answers, but the tables aren't displaying. Also the tabs arent functioning. I was able to view the data in my repository and there is no error. What might be the problem for this? We uninstalled obie
-
Error when attempting to install Desktop 6.2
Hi - When I attempt ro install the software v 6.2 of the Palm Desktop there is an Internal Error 2738 and the installation stops. Anyone know what this means and what can be done to install successfully? All apps were closed and firewall turned off.
-
Hello, I like RSS feeds because I can open Safari, let it update the "subscribed" RSS feeds and then turn off the computer to read the feeds later offline. While the text remains in place, the images that illustrate the feeds are replaced by a questi
-
BURNED DVD PLAYS WITH SOUND ON PC BUT NO SOUND WHEN PLAYING ON TV ???
BURNED DVD PLAYS WITH SOUND ON PC BUT NO SOUND WHEN PLAYING ON TV - VIA VIDEO PLAYER ??