How to reboot or restart or refresh curve 8520 without removing and refixing battery ?

How to reboot or restart or refresh curve 8520 without removing and refixing battery ?
Solved!
Go to Solution.

Soft reset:
http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=64C8797ED4CAB08C34C13D91377C1704?...
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Similar Messages

Stopped while restarting my blackberry curve 8520

hi, need some help, while i restarted my bb curve 8520 it was stucked not open anymore...it just halfway then stuck...and now it was totally not restarted...please give some tips on how to fix it..thanks...

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
You also may want to attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT4972 how to recover lost data in i phone 4 without backup and how to activate i phone 4 without sim after update to ios 5.1.1

how to recover lost data in i phone 4 without backup and how to activate i phone 4 without sim after update to ios 5.1.1

Not possible in both cases.

How can I add 15000 numbers to curve 8520

Hi .... please I need help... How do I add 15000 numbers to contacts in my BB curve 8520?
I have the numbers in excel file .
david guetta
Thanks

Save the file as .csv, and follow these instructions:
KB article on import csv

How to download Thai Font to Blackberry curve 8520

My blackberry curve 8520, T-mobile network, ver 5.0.0.681 hasn't got Thai Font on it. I would like to download Thai font for reading and input (writing).please explain how to do it step by step because I do have not much knowledge about computer or software. I have read some topics says that I have to download and choose the network provider which mine is T-mobile and it provides only Muli-language (not All Languages) which I can't write it (only reading). I am not too sure it is correct or not.I believe I need to download Blackberry desktop software as well. please also give advice on these software.

Hi and Welcome to the Community!
The simplest way is to, on a PC (you cannot do this on MAC):
1) Uninstall, from your PC, any BB OS packages (add/remove programs, Uninstall a Program -- it depends on your Windows OS level)
2) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/apps-software/desktop/?lid=us:bboftwareesktopSoftware&lpos=us:bboftware
3) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
If your carrier only provides a "Multi Language" package, then you may need to look at other carriers OS packages, and find some that have "East Asia" or "All Languages" ("Multi Language" indeed does not have Thai, as per this KB).
4) If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
5) Now launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC, and you should be able to select the languages you desire If, during the process, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
Don't forget to backup.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Curve 8520 crashes alot and shows a white screen

I bought my bb in may. Now since a week ago it sometimes crashes the screen turns green and purple and it fades to white. I have to take out my battery and charge it without. Then when the sign of no battery shows I put it back in. When I reboot my bb without taking out the battery first it gets stuck in the process.
But the BB keeps on crashing, and the amount of crashes increase...
help me please?

Hello salgaga and welcome to the BlackBerry® Support Community Forums.
Sorry to hear you are experiencing an issue with your BlackBerry® Curve™ 8520 smartphone.
It would be advised you backup your user data using BlackBerry® Desktop Software and reinstall your software as shown in KB11320 How to perform a clean reload of the BlackBerry Device Software for Windows or KB19915 Perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software on a Mac computer
Before essential data is restored to your Curve, check to make sure you test the performance to ensure the screen is normal. Should the screen still display the alternate colours it would be advised you contact your point of sale for hardware related repairs.
Hope this answers your question.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Sos curve 8520 white screen and power off

hello!! i have a curve 8520 and for some weeks now it shuts down every now and then.if i'm on the phone or in an app and generally use it,the screen gets all white.i cannot even turn power off with the button,so i remove the battery and place it again.but if i do not connect it to the pc or charger,again the screen gets white on the reboot.i don't know if you understand what's going on because i wrote so many things,but i would appreciate your help!!thank you so much!

Hello helenakallas,
Sorry to hear about your issue.
In this case we can try to reload the software on the BlackBerry® smartphone to make sure it is running the latest version and there are no issues with the OS.
Here is how to backup your BlackBerry smartphone http://bbry.lv/oPVWXc
Once you have backed up your BlackBerry smartphone please follow the link below to complete a clean reload of the BlackBerry smartphone software.
Link: http://www.blackberry.com/btsc/KB03621
Once completed test it and proceed with a selective restore, here is how to restore http://bbry.lv/qgQxLo
Thank you
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How to Reinstate Another Sync Service on Curve After BBDM Removed

Hi there,
I need to reinstall the Google Sync software on my Curve 8330. I have removed the BBDM from my Mac but am not able to install the Google Sync software on the Curve, probably because the Curve still thinks the BBDM sync is still enabled. How do I remove the BB sync from the Curve? I need to be able to synchronise "on the go" not at a computer, hence the removal of the BBDM software.
Guidance much appreciated. Thanks in advance for same.
Lynn

How to solve my problem if my curve 9300 is error and loading always??

Please tell me soon...I cannot do anything or open my message
It's terrible if there is smthing important that my friend sent me...

Hey kimmun,
Welcome to the BlackBerry Support Community Forums.
I would suggest to do a clean reload of the BlackBerry® device software as shown here:
How to perform a clean reload of the BlackBerry® Device Software for Windows
http://btsc.webapps.blackberry.com/btsc/KB11320
Please test before restoring any data to the BlackBerry® device.
Thank you.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Curve 8520 keeps freezing and going to white screen

I recently had my curve replaced after the trackpad stopped working. Now my new curve keeps freezing when I'm on the internet, the screen will get white lines across it which gradually get bigger until the whole screen is white. A reboot doesn't work unless the phone is plugged into the charger and the problem never happens when the phone is on charge.
I've tried changing the browser settings so JavaScript isn't enabled, I've also reinstalled the software and finally decided to wipe my blackberry and restored it to the file i had saved from my old curve and I'm still getting the same problem.
I'm not sure whether it's linked to the battery as it also happens when making a call if the battery is low and when I reboot my curve after it's gone to a white screen the battery has usually dropped a few bars (usually from full to 2 bars)
If anyone has any ideas it would be greatly appreciated!

Could someone please help me. I have a blackberry 8520 and I recently accidentally put ONLY the keypad in the water but luckily I read that you have to keep it in the sun for 24 hours and it worked, next my charger port broke of then I got it fixed but right after I got it fixed every time I fully charge my phone or it have 2 or more bars in like 10 or 7mins it freezes and their are these lines then it goes into a white screen. I took the battery and put the batter back in the phone worked fine but then the battery went from full to battery drained shutting down?!? What do I do??

CURVE 9220 HEATS UP AND DRAINS BATTERY LIFE

My blackberry curve 9220 gets really hot and starts to drain the battery .
the entire battery life is dained out in less than 3 hours
i try to cool it off but it doesn't really work ,
and there are no applications runnig at the back except the default ones example - phone , browser , bbm and messages .
and the weird thing is that when i switch off the mobile network the the battery stops draining
can someone please help i really need my emails,bbm and whatsapp back
Solved!
Go to Solution.

Hi and Welcome to the Community!
Given your description, I'd deduce low/poor signal from your mobile service provider. Digital devices modulate their power consumption depending on the strength of signal they receive from the carrier tower. Lower signal strength/quality, higher battery drain. To firmly check that, you need to contact your mobile service provider as it's there network that is the cause. It is possible that they have some problems in the areas you are in.
You could also attempt to boot into Safe Mode, so as to suppress all 3rd party apps from auto-launching (even if you don't see them in the AppSwitcher ribbon, they can be running):
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to display a Hierarchy node for level 2 without parent and description

Hi,
How to display a node at level two at the query the first node is CLASS where hierarchy is maintained and the second node is
subclass where hierarchy is not maintained, Now I want to display the subclass in the row where it has to display its child node in one column & text in the other.

Hi,
I dont think this would be feasible to display in different columns.
-Vikram

My iphone 5 has been rebooting randomly after updating to ios 7.1.1 and the battery bar now stays the same.this has been occuring all the time even when batery level is high.it also happens when it is also charging.

Please help me. It is really getting irritating

Hi AimanBms,
If you are having issues with your iPhone restarting unexpectedly, you may find the following article helpful:
iOS: Device unexpectedly restarts, displays Apple logo, or powers off
http://support.apple.com/kb/TS5356
Regards,
- Brenden

8800 keeps rebooting, then won't read sim until I remove and replace it.

When I'm using my new 8800, the sceen will go black (and if I'm on a call it goes silent). Then the red light flashes before the screen comes back on (to what I was doing before it turned off), but the sim card stops working (I get no signal) and it says something like "memory card removed". I have to turn it off, remove the sim and place it back in for the sim to be read again.
This has happened multiple times.
How can I solve this problem?!
Thank you.

To check is it a software problem do the following.
Backup all your sensitive data via BB Desktop Software.
Important: Use "Advanced" feature of backup mechanism and save only information which is necessary.
Go to Options - Security Options - General Settings
open menu and select "Wipe handheld"
it will wipe the device memory from saved data, applications will remain.
Now check the device and restore your data.

Restarting airport after PCMCIA cardbus card removed and reinserted

Ok my problem is this. I have a 3rd party (buffaloTech G54 cardbus) 802.11G card which is airport compatable on a TiBook 667. When I travel, I take the card out of the machine after its asleep and re-insert the card before waking it up again. Every time I do this however, the system recognizes there is a card there but the airport menu says no card was found. The only way then I can get the computer to recognize the card is to restart.
My question is there a way to avoid this? (is it better to turn off the card and remove it before I put it to sleep then wake it and insert the card?) or is there a way I can manually force the drivers to reload via command line?

My question is there a way to avoid this? (is it
better to turn off the card and remove it before I
put it to sleep then wake it and insert the card?)
I would try that first.
iFelix

How to reboot or restart or refresh curve 8520 without removing and refixing battery ?

Similar Messages

Maybe you are looking for