How to recategorize URL's when using IronPort Web Usage Controls

The usual way of recategorizing URL's doesn't work when Cisco IronPort Web Usage Controls are enabled. There's no Word in the doc about how to recategorize URL's neither. We're running AsyncOS 7.7 on S170. Please advise.

Hi,
You can try this link (normally takes 24-48 hours).
https://securityhub.cisco.com/web/submited_urls
If it doesn't work I suggest you to open a TAC case.
Regards,
Luis Silva

Similar Messages

  • IronPort Web usage controls

    Please help me in this confusion. My Client wants a IronPort Web Usage Controls for his two devices below:
    A4BADBE0F4F5-DNGYY4J
    A4BADBE0FC06-97SYY4J
    We as partners provided our client with the WBUN‐2A‐GV‐D‐1Y ‐ Dual S160‐Series Appliance, 1 Year IronPort WUC, 1 Year Platinum Support ‐ 250 users
    The question is my client wants a qoute for the WEB USAGE CONTROLS. The local reseller in my country says the web usage control is already in the bundle we provided him ?
    How do we get the web usage control software or is it already in the bundle ? If its not in the bundle How do we purchase it ?
    Thanks

    Hi Talal,
    Please open a support case with the Cisco Tac Content Security Team. They can review your appliances for licensing and if needed email you your feature keys.
    Sincerely,
    Erik Kaiser
    WSA CSE
    WSA Cisco Forums Moderator

  • How to send a receipt when using a web form for payment

    I have a site on which people sign up for classes (events) through a web form. I have set this up using a custom form in which the Amount field is populated using javascript, depending on which class they select from a drop down.
    Is there a way to send the client a receipt for the transaction? Would this be done within BC or would it be done within the payment gateway? (Authorize.net, in this case)
    Thanks for any help.

    Hi - I have a similar problem. I found I can send a receipt using sendinvoice=true&amp in the form action, but it uses the default invoice layout and shows GST to be $0, when it should be 10% of the class(event) fee. I can't modify the invoice as it is setup just right for out products, which are purchased through shopping cart. Any ideas on ow to work around this? Any thoughts would be very appreciated.

  • How to solve power error when using USB camera adapter in your camera

    Hello Everyone,
    First of all I wanna say reducing the output of the USB camera adapter from 100mA to 20mA just to save battery life is by far the most incredible adjustment in the history of @)#*$#%*($#!
    I know most of us bought the USB Camera adapter so we can use it as a USB adapter for the Camera (saves us from taking the memory card on and off the camera) but sadly the "Ginues Apple" reduced it to 20mA which decreases the range of cameras and flash drives that will work with it. I use Gopro Hero 3+ black and everytime I plug it with the adapter to my ipad I keep on seeing this @#@$#@ power error. I didn't want to waste the expensive adapter so I tried to look for a micro sd card reader but I don't think 20mA readers still exist.
    Now to solve this problem is very simple add a power source to help that 20mA up, most of the my friends bought a powered port hub but it's not my type because it's bulky, needs an outlet and not portable.
    So I found a better solution on how you can add a power source and still be portable, the answer is power bank or portable charger.
    Things you need:
    Camera
    USB camera adapter (Ginues Apple product)
    Power bank (I'm using 8,400 mAh)
    Dual USB Male to 5 Pin Mini USB Y Cable
    Ipad
    Procedure:
    Camera --- 5 Pin Mini USB ------------------ USB camera adapter ---------- Ipad
                                                   '---------- Power Bank
    Attach you camera to the 5 pin mini usb then the USB1 male to the female apple's USB camera adapter then to the Ipad. = this will show the power error.
    Then attach the USB2 to the power bank/portable charger to power it up.
    your welcome

    yocto yotta wrote: How to charge iPad Air when using the camera connection kit?
    No can do, Skippy!

  • How to hide system tables when using the Oracle SQL Developer?

    Hi,
    I would like to know how can I show only the tables that I created under the Tables tree? I didnt find a way to create a separate database using the Oracle Sql Developer. I see all the tables together, and would like to differentiate between different databases.
    Can anyone explain to me how to do these things?
    Thanks,

    Hi,
    I would like to know how can I show only the tables that I created under the Tables tree? Your posting is not clear,again tell something more on tables tree,what u want to achieve with it.
    How to hide system tables when using the Oracle SQL Developer? if u connected with sys, system or user with dba role then u have a privilege to see these tables,so revoke the privilege/role from ur user to view this tables if ur connected other then sys,system,
    I didnt find a way to create a separate database using the Oracle Sql Developer. DBCA is a tool for creating the new database.
    Kuljeet

  • Ques;How  do you secure imail when used being used in iweb. People can mess

    How do you secure imail when used being used in iweb? People can mess w/my settings in iweb imail window.

    What is iMail?
    And what is an iWeb iMail window?
    iWeb is part of iLife 06 which is an application used to create websites hosted on .Mac.
    Are you referring to Apple's Mail application and webmail access using a browser such as Safari to access your .Mac account?
    Which people can mess with what settings? You shouldn't allow anyone else to access your Mac when logged in to your account and home folder/directory. OS X was designed for multiple users of the same Mac with each regular user having their own computer login account (with or without admin privileges) and associated home folder/directory to store and access their data and settings for their login account only.

  • Does anyone know how to load ACR presets when using ACR in the creative cloud?

    Does anyone know how to load ACR presets when using ACR in the creative cloud?

    Moving the discussion to Adobe Camera Raw forum.
    Thanks,
    Atul Saini

  • When used as an Activex control in windows How can I prevent the "Q" logo from appearing between streaming videos?

    When used as an Activex control in windows How can I prevent the "Q" logo from appearing between streaming videos?

    Hello Cgifford,
    Welcome to National Instruments Forums.
    To output your signal to the PFI lines,
    you can use external connectios between OUT0 and PFI lines. You can also use
    the backplane to do so by routing into the same RTSI line.
    1)
    On the SCOPE and FGEN, the name of the
    terminals are actually “PXI Trigger Line x/RTSIx” but on the 6602 you might
    need to route the signal using the property:
    You can also use the DAQmx route signal which perform the same opperation.
    2)
    This will depend on the frequency of
    your pulse train. If this is lower than about 10 ms, then you can probably
    place this on a loop and start and stop the acquisition every time. If the
    frequency is higher than this, you will have to use:
    -       Scripting on the FGEN side (read more)
    -       MultiRecord Fetch (more information in the scope help file
    section “Acquisition Functions Reading versus Fetching”).
    3)
    The short answer is yes. The longer one
    might depend on how tight you need the synchronization to be (us, ns, ps). For
    very tight synchronization, you should look into here.
    Message Edited by Yardov on 06-18-2007 03:14 PM
    Gerardo O.
    RF Systems Engineering
    National Instruments
    Attachments:
    property.JPG ‏7 KB

  • How to avoid data repetation when using select statements with innerjoin

    how to avoid data repetation when using select statements with innerjoin.
    thanks in advance,
    satheesh

    you can use a query like this...
      SELECT DISTINCT
             frg~prc_group1                  "Product Group 1
             frg~prc_group2                  "Product Group 2
             frg~prc_group3                  "Product Group 3
             frg~prc_group4                  "Product Group 4
             frg~prc_group5                  "Product Group 5
             prc~product_id                  "Product ID
             txt~short_text                  "Product Description
    UP TO 10 ROWS
    INTO TABLE l_i_data
    FROM
    Joining CRMM_PR_SALESG and
    COMM_PR_FRG_ROD
    crmm_pr_salesg AS frg
    INNER JOIN comm_pr_frg_rod AS prd
    ON frgfrg_guid = prdfragment_guid
    Joining COMM_PRODUCT and
    COMM_PR_FRG_ROD
    INNER JOIN comm_product AS prc
    ON prdproduct_guid = prcproduct_guid
    Joining COMM_PRSHTEXT and
    COMM_PR_FRG_ROD
    INNER JOIN comm_prshtext AS txt
    ON prdproduct_guid = txtproduct_guid
    WHERE frg~prc_group1 IN r_zprc_group1
       AND frg~prc_group2 IN r_zprc_group2
       AND frg~prc_group3 IN r_zprc_group3
       AND frg~prc_group4 IN r_zprc_group4
       AND frg~prc_group5 IN r_zprc_group5.
    reward it it helps
    Edited by: Apan Kumar Motilal on Jun 24, 2008 1:57 PM

  • How to sync/edit audio when using frame freeze or time remapping?

    how to sync/edit audio when using frame freeze or time remapping? in premiere pro cs6

    You need to give more information about what you want to happen to the audio when you freeze or time remap the associated video.
    Is it synch video?
    Is it music?
    Is it Voice?
    Generally .. you have to cut and design the audio around the video effect.

  • How do I lock safesearch when using BING

    how do I lock safesearch when using BING search engine

    I assume you're using the "Content Aware" option for the Spot Healing brush.  It can be a maddeningly stupid option -- there's no telling from how far away it will pull the replacement pixels and will leave streaks that can be very difficult to remove.
    It would be best for you to include a sample image that's giving you the problem so we can suggest the best way to attack it.
    In general, the "Content Aware" option works best when you use a very small brush size.  That pulls in pixels closer to the area you want to heal.  If you get streaks, sometimes you can use the Spot Healing brush to get rid of them by going over the area in a perpendicular direction to the streaks.
    Ken

  • CP 8 crashes and closes when using the web object.

    Adobe Captivate 8 is crashing when using the web object, give me a box which says I need to close the program. How can I fix this issue?
    Message was edited by: Deborah Schonfeld

    Hi There,
    Can you please confirm your operating system ? Do you have the full administrative rights ? Are you getting any error when trying to insert Web Object interaction ?
    Would like to inform you Captivate 6 onwards interactions have been uploaded on server. Captivate pings this server on a regular basis, If there is any firewall or strict network policy then it might take some time to check the URL or might be result in crash or freeze.
    Regards,
    Ajit

  • Problem exporting to excel when using embedded web templates through WAD

    Using web templates designed with WAD, we are experiencing an issue when trying to export excel when using embedded web templates. 
    We have set up tabstrips within our templates that load other templates (embedded into the global template). 
    Upon right clicking on any query and choosing "Export to Excel", any query that is in one of the tabs using the embedded web template item does not show up.  Any queries in natively in the global web template will export and show up fine.
    Any thoughts on how to enable something like this, or workarounds to make this work?  We decided to split up these templates for performance reasons and can't go back from that decision.  Also let me know if you need a better explanation of what we're trying to do.
    Thanks in advance!
    Jonathan

    Hi SDBI,
    Is this in place of loading a new template per tab?  We are using container layouts in all of our templates so we can link things into tabstrips as well, we have just split up some templates to be embedded into tabs for performance reasons and data locking.
    Also when exporting, we are looking for all of the items displayed at that time to be exported, however only the items from the global template show up, not all of the displayed queries.  For example, anything outside of the tabstrip will export perfectly, but since the query embedded into the template the tabstrip is loading is not part of the native web template, it does not show up.
    Seems like a tool limitation to me when embedding templates?
    Thanks,
    Jon

  • How to get user logged in to ironport web

    How to get user logged in to ironport web by  their username, time connected and the IP address?

    The onbox reporting can only show what web traffic is currently being surfed.  We can provide a near-real time view of this web traffic with a "Web Tracking Report".
    However, there is not a report available that depicts what you're describing.  (This information is best contained on the domain server).  The closes we could get with the WSA is displaying which credentials we are currently caching.  (Which users we've seen since within the surrogate timeout).  This is possible with the authcache command on the cli.
    ~Tim

  • How can we publish Labview data using the web

    how can we publish Labview data using the web?
    Dr. Eugene Berman, Moran Kamilyan and Ravit Bar

    [email protected] wrote:
    how can we publish Labview data using the web?
    You could use shared variables and publish them to the network or use data sockets.
    Kudos always welcome for helpful posts

Maybe you are looking for