How to RECEIVE a NAT'd call on an SPA2102 ??

Can it be done on an SPA2102?
For example RTP packets would be sent to the From IP in the SIP packet header rather than the IP that appears in the SDP.
PS I am not confused. I have a VERY good reason for wanting to do this.

Similar Messages

How to receive non registered number call on skype...

I want to use my skype to go for international travel. Using my local call fowarding I would like to transfer the call to an international number. Ofcouse the build in seucrity is, only registered numbers can call me, if the number is not registered, the system will as for a pin. I do not know who will me call me, how to do i by pass the feature? Or is there any other service that skype offers for roaming in india.

I suggest that you contact the South African agent for Adobe:
https://store3.adobe.com/cfusion/store/index.cfm?store=OLS-AP&nr=0#loc=en_xap&view=ols_cat &catID=SPECIALS&store=OLS-AP
It is likely that he has exclusive rights to sell Adobe products in most of Africa, therefore other sources will not be able to legally sell you the number.

IPhone 4 updated from 6.0 to 7.1.2 and now the picture no longer appears when receiving or making phone calls. How do I fix this?

I updated the software for my iPhone 4 from 6.0 to 7.1.2 and now pictures (contact picture/picture ID's) no longer appear (take up the entire screen) when receiving or making phone calls. They only show in a small circle which is not convenient at all. How do I fix this, please?

You are welcome. I have seen numerous posts on this subject, so I suspect you are correct. It doesn't seem like a welcome change. You can send feedback to Apple at http://www.apple.com/feedback/iphone.html

How to receive a xml CDATA in string element when OSB calling a webservice?

How to receive a xml CDATA in string element when OSB calling a webservice?
I have a business service (biz) that route to operation of a webservice.
A example of response to this webservice legacy:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:eg="example">
<soapenv:Header/>
<soapenv:Body>
<ex:executeResponse>
<ex:arg><![CDATA[<searchCustomerByDocumentNumberResponse>
<name>John John</name>
</searchCustomerByDocumentNumberResponse>]]></ex:arg>
</ex:executeResponse>
</soapenv:Body>
</soapenv:Envelope>
the type of ex:arg is a string.
How to receive this CDATA structure to webservice in OSB?

Similiar to the answer How to pass a xml CDATA in string element when OSB calling a webservice?
Use the xquery function fn-bea:inlinedXML rather than fn-ben:serialize
Steps to solve this problem:
1. Create a XML Schema. E.g.:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
elementFormDefault="unqualified">
<xs:complexType name="searchCustomerByDocumentNumberResponse">
<xs:sequence>
<xs:element name="name" minOccurs="0">
<xs:annotation>
<xs:documentation>
</xs:documentation>
</xs:annotation>
<xs:simpleType>
<xs:restriction base="xs:string" />
</xs:simpleType>
</xs:element>
</xs:sequence>
</xs:complexType>
<xs:element name="searchCustomerByDocumentNumberResponse" type="searchCustomerByDocumentNumberResponse"></xs:element>
</xs:schema>
2. Create a XQuery to create a searchCustomerByDocumentNumber ComplexType. E.g.:
3. Create a XQuery Transformation (XQ) to get the CDATA response to the webservice legacy. E.g.:
declare namespace ns0 = "novosiaws";
declare function xf:getReponse($searchCustomerByDocumentNumberResponse as element(ns0:searchCustomerByDocumentNumberResponse))
as element(searchCustomerByDocumentNumberResponse) {
fn-bea:inlinedXML($searchCustomerByDocumentNumberResponse/ns0:arg)
For more information about xquery function:
fn-bea:inlinedXML
The fn-bea:inlinedXML() function parses textual XML and returns an instance of the XQuery 1.0 Data Model.
The function has the following signature:
fn-bea:inlinedXML($text as xs:string) as node()*
where $text is the textual XML to parse.
Examples:
fn-bea:inlinedXML(“<e>text</e>”) returns element “e”.
fn-bea:inlinedXML(“<?xml version=”1.0”><e>text</e>”) returns a document with root element “e”.
Source: http://docs.oracle.com/cd/E13162_01/odsi/docs10gr3/xquery/extensions.html

How do i receive a face time call?

I know this is a stupid question but my iphone doesn't seem to receive a Face Time call request. What am I doing wrong?

FaceTime turned on? Settings>FaceTime>On. Connected to WiFi? All FaceTime calls are done over WiFi only.

SPA112 - Can receive but not make calls

I have just setup an SPA112 at home behind a NAT router and have configured it to a state where I can receive but not make calls.
It registers fine and remains registered.
The Line 1 Status indicates a State of "invalid" and a Tone of "reorder" when the call fails.
I believe I have fiddled with the dial plan sufficient to ensure that the number is not being rejected based on it. My current dial plan is as follows:
     (*xx|000S0|0[2-9][69]xxxxxxxS0|[69]xxxxxxxS0|04xxxxxxxxS0|xxxxxxxxxxxx.)
I have tried with and without an outbound proxy.
I have attempted to debug the issue, enabling full DEBUG level logging and setting "SIP debug option" to "full", but all I get in the log when making a failed call is the following:
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 18 and str G.729/8000 chan 0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 8 and str PCMA/8000 chan 0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 0 and str PCMU/8000 chan 0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 2 and str G.726/8000 chan 0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 100 and str NSE/8000 chan 0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.112000] In cordless Driver Codec 112 and str encaprtp/8000 chan 0
     Jul 23 21:35:29 SPA112 daemon.notice msgswitchd[310]:   MSGSWD RTCP Reqt len 12 Data 2,17,7304,0
     Jul 23 21:35:29 SPA112 kern.warning [17339229.268000]
     Jul 23 21:35:29 SPA112 kern.warning [17339229.268000] #### RTP STOP Flag set in this channel break ####
     Jul 23 21:35:29 SPA112 kern.warning [17339229.272000] ###### sock_sendmsg return 172
I have been unable to find any information about these warnings on th net.
I can successfully make calls with soft phones configured with similar settings behind the same router.
What am I missing?
Any suggestions appreciated, thanks.

Thanks for the post.
To clarify, I have been testing the connection by attempting calls to and from my mobile phone. If I use my mobile to call the number linked to the VOIP account that the SPA112 connects to, the call is received fine and the call works perfectly; I can hear voice at both ends fine.
If I attempt to call the mobile from the phone behind the SPA112 I immediately get a reorder tone as soon as the number is dialed by the SPA112 (i.e. immediately if it matches a number in the dial plan followed by S0 or after the short wait period otherwise etc.)
On the other hand, if I use a softphone (I've tried MicroSIP and Blink) I can place calls to the same mobile through the same VOIP account from the same LAN behind the same NAT as the SPA112, and the calls are received and bidirectional voice comms works just fine.
I'm not sure if I can make calls internal to my LAN with this setup... I only have the one VOIP account, and have no SIP server on the LAN (if that's the right terminology, I'm new to this).
Unfortunately I'm not sure what you're refering to when you talk about ACL and COR. The topology is very straight forward: the SPA112 (along with a couple of PCs) on a LAN behind a NAT router with an internet connection on the other side. The SPA112 is configured as a DMZ, though I don't believed this had any impact for better or worse. In no test for either SPA112 or softphone have I forwarded any ports or changed any router configuration at all (with the exception of the DMZ).
So the question is why the softphone can place calls fine, but the SPA112 can only receive calls. The dial plan is an obvious answer, but I'm fairly certain I've ruled this out.
If someone can tell me how to get more detailed logging out of the SPA112 that would be very useful as well.

How do I make a phone call from my mac with yosemite?

How do I make a phone call from my MacBook Pro on the Yosemite operating system?

The following quotation is from Connect your iPhone, iPad, iPod touch, and Mac using Continuity
There is more information in the link, including supported hardware and that you must have Settings > FaceTime > iPhone Cellular Calls set to on on the iPhone.
Phone calls
With Continuity, you can make and receive cellular phone calls from your iPad, iPod touch, or Mac when your iPhone is on the same Wi-Fi network.
To make and receive phone calls, here's what you need:
Sign in to the same iCloud account on all your devices, including your Mac.
Your iPhone and your iPad or iPod touch need to use iOS 8 or later. Your Mac needs to use OS X Yosemite.
All devices must be on the same Wi-Fi network.
All devices must be signed in to FaceTime using the same iCloud account. This means any device that shares your Apple ID will get your phone calls. Look below for instructions on how to turn off iPhone cellular calls.
Wi-Fi Calling needs to be off. Go to Settings > Phone. If you see Wi-Fi Calling, turn it off.
Make a call
To make a phone call on your Mac, iPad or iPod touch tap or click a phone number in Contacts, Calendar, or Safari.

How to change the NAT type to Open on a Imac using bridged connections

Hey everyone I have a problem. I play xbox live with my friends and i just moved and dont have a wireless adapter anymore. so i have bridged connections with my imac and xbox via ethernet. It works perfectly, but the only problem is that when i connect it say that my NAT type is strict. To play with all my friends i need a open NAT type. Does anyone know how to make the NAT type on the Imac open. And i do have a D-link router model DIR-625. When i called D-link they said to port forward, i did and it still didnt work, they said it must be the fire wall on the mac, microsoft said the same thing, that it might be the fire wall. I checked the fire wall and it said "All Incoming connections are allowed".
I would really much appreciate it if someone helped me. Thank you!

Yes, most likely. Microsoft has provided a list of XBox LIVE!-compatible routers. Since the OS X Internet Sharing feature is limited, there is no way to configure port mapping or placing the XBox in a DMZ with it. Typically, you either use a compatible router or configure port mapping/DMZ for non-compatible routers.

How can I delete the recent calls list in FaceTime?

How can I delete the recent calls list in FaceTime of my Mac?

Hello muchaim,
After reviewing your post, it sounds like you want to delete the recent call list. I would recommend that you read this article, it may be able to help the issue.
FaceTime for Mac (Yosemite): Make and receive FaceTime calls
FaceTime keeps a list of the most recent calls you made, received, or declined, with the most recent call at the top. To return a call, click the Video button or the Audio button . To remove a call, select it and press Delete.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

On my iPhone 4, people cant hear me when I make and / or receive normal (GSM) phone calls. But when on calls using internet based / native apps like viber or skype, people can hear me just fine. Voice memos work too and have already tried different SIMs

On my iPhone 4, people cant hear me when I make and / or receive normal (GSM) phone calls. But when I make/receive calls using internet-based / native apps like viber or skype, people can hear me just fine. I have tried recording my voice using voice memos - this works. And have already tried different SIM cards but the problem persists.
I have taken my phone to an authorized Apple service center, where they restored my phone to factory settings, but still facing the same issue. They service center directed me to Apple Customer Care Hotline, where I have now spent 3+ hours explaining my issue and yet no one can resolve it. The easy answer if to replace the phone - and since it is out of warranty, I am expected to pay for it.
Additionally, the customer service has been so rude and confrontational that it has completely changed my view of Apple and its customer focus. I am a disappointed and angry customer today - people would be surprised to hear just how rude customer service was including making statements such as "Apple doesnt make infallible products, that's why warranty is needed for our products" and that "every product undergoes a problem at some stage, so do ours!" There goes whatever confidence I had...
My concern is simple - if no one at Apple and / or its CS hotline is able to address my issue comprhensively and keep telling me that they have never encountered a precedent before, then with what right can they expect me to pay for a replacement?! I am NOT here to fund Apple's research into their product faults and manufacturing.
And even though a customer is out of warranty, is it too much to expect an Apple product to work well for at least a 'reasonable' period of time. My phone is less than 18 months old and has been facing this issue for the past 2 months - surely the longevity of Apple products is more than 18 months!
Just a sad sad day for an Apple customer, compounded by unjustifiably rude and aggressive staff. And still no resolution to my problem.

I am having the same issue - with my last 2 iPhone 4's. My first handset each time I was on a call wether it was up to my ear or on loud speaker, the call would automatically mute even though the mute button wouldn't show up as highlighted. Pressing the mute button on and off during the call doesn't fix it either. I rang Apple and asked what some of their trouble shooting solutions were. I got told that it might be a software issue and to install the latest software update. This failed. I then got told to uninstall the software on the phone and do a complete restore. This also failed. After trying the troubleshooting suggestions, I took the phone into my provider and they sent me out a new phone within a week under warranty claiming it was a hardware issue and probably just a "glitch" with that particular phone. This was not the case....
After receiving my second iPhone 4, I was hopeful that it would work. For the first couple of days, making/receiving calls was not an issue. Until after about a week, the same problem started again. In one instance I had to hang up and call back 4 times and the call would still automatically mute after about 5 seconds. Also on the second handset, the main camera located on the back of the phone has red and blue lines running through it and can't take a decent picture. So back to the store I go to get another replacement - Again.
For a phone that is rated highly and as a keen Apple product purchaser, I am a bit disappointed with the experience I have had with the iPhone 4. Let's hope they find a fix sometime soon because this is becoming a bit beyond a joke.....!!

How do I answer a facetime call on my macbook air?

I received a factime call on my new MacBook Air laptop and was unable to answer it. It kept ringing but there was no place to either accept or decline the call as there is on my iPad 2. How do I answer a facetime call?
Also, how do I enlarge the image on the MacBook Air to get it to be full screen? I clicked the little green circle at the top of the image to maximize it, but it didn't do anything.

Hi Bonnie183,
If you are having issues with FaceTime on your Mac, you may find the following article helpful:
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
Regards,
- Brenden

How many Receiver determination in File to SOAP scenario

Hi,
I am trying a File -SOAP-File scenario, where file will be send to PI asynchronous. BPM is configured to receive the file and
call the web services and get the response (Synchronous call) .After that BPM send the file asynchronous to File via FTP .
It is basically asynchronous/ Synchronous bridge scenario.
To do this I have have configured the BPM & created 3 Communication channel . 1 sender (File) & 2 receivers ( SOAP & File)
But i got confused in Receiver determination. How many Receiver determinations do we require in this step? 2 or 3. If 3 how they will look like. I believe Interface determination is same as Receiver determination. I am suing Business System to send & recv the file.
Points will be rewarded for suitable answer.
Thanks

hi,
You require 3 receiver determinations.
one from File to BPM(XI)..
another from BPM to SOAP and other from SOAP to FILE.
This is exactly the same scenario.
RFC Scenario using BPM --Starter Kit
Thanks,
Vijaya

How to receive an RFC message in PI ABAP stack from ECC

Hi mates,
I am involved in a scenario in which we want to receive a message in PI (ABAP stack) from ECC (ABAP stack as well).
We created a RFC destination (3) in sender system (ECC) so both stacks could be linked. However, we do not know how to receive this message once we are in PI Abap stack.
In sender system code, a call destination takes place, an this destination stands for the one destination i noted before.
BUT, as this RFC does not exist in PI, i wonder what steps have to be done in PI in order to be able to get the message from ECC.
Hope you guys can guide me through this. Any help
Thanks a lot in advance and best regards,
david

Hi Anand,
No no, i do not want to create any sender RFC Comm Channel.
What i want is to receive (by means of no PI adapter) a message in PI (abap stack) from ECC (abap stack), just by a RFC connection (type 3) between both systems.
I will try to explain in more detail what i want to achieve:
1) A standard SAP program is executed in ECC, at the end, a call destination is done.
2) This destination call, calls an RFC destination that points to PI (RFC dest in SM59, type 3)
(Until now, nothing is done in PI, there is no sender adapter, we just linked both ABAP stacks)
3) In ABAP stack of PI, we want to receive the message, make any transformations and send the target emssage to PI adapters
4) From that moment on, a ordinary PI integration is done.
So my question is, what kind of stepd so i have to perform to get the message from ECC in PI without creating any object in PI (ESR, ID, i mean). Just as if we wanted to receive a RFC message, lets say, in BI (abap side) from ECC.
Hope you got me this time.
Thanks a lot in advance.
Best regards,
david
Edited by: David de Miguel on Dec 27, 2010 11:48 AM

Message Driven Beans: how to receive and send in a single session?

Hello
How to receive and send JMS messages in a message driven bean using a single session?
Thanks.

Are you referring to writing code within the onMessage method itself to receive JMS messages?
If so, that is not a pattern that is recommended, especially not in the case of a blocking JMS
receieve. If you must write an explicit JMS receive within an EJB component it's best to use
a "check the queue" approach where you give a very small timeout for the receive. That way
if the message is there it will be returned but if not the call will not block.
You'll also need to take the transactional settings of the onMessage method into account.
If your are sending a message and then waiting for a response, those two actions can
not be done within the same global transaction. For that, you'll need to either use
BMT and perform each in its own transaction or just not use global transactions at all,
in which case each send and receive operation will be atomic.
--ken

How do i set up wifi calling?

How do i set up wifi calling?

Doesn't technically exist although there are easy ways around this.
I had a multi level apartment once. The bedrooms were partially underground. The neighbors had a network extender that caused many problems for our roomates. Luckily it didn't bother my phone.
Now a days verizon messages will work on wifi. I didn't have that option then so I used Google voice. I also used an app called condi or Tasker and groove ip.
Groove ip let's you make and receive free calls on wifi. If you have comcast triple play you can use their service too.
Basically I set my phone up to automatically forward my phone calls to my Google voice number. That way over wifi in my apt there was zero chances I would miss any calls. When I leave the apt and disconnect from wifi it would cancel call forwarding.
Other option is network extender. If you complain enough to verizon you can get one for $100. No way to prevent others from using it but you can give a certain amount of numbers priority.
Bottom line, verizon should offer this feature out of the box. But for now there are solutions.

How to RECEIVE a NAT'd call on an SPA2102 ??

Similar Messages

Maybe you are looking for