How to receive a XML data thru' HTTP

We are trying to build an real-time interface between two system thru' XML. So the idea is that source app would post XML to a target URL using HTTP and the target app would validate the message, call pl/sql to transform and finally return back a SUCCESS or ERROR message (in XML). The source app is a SQL Server database and the target database is Oracle.
Steve Muench described an approach of writing a custom Servlet that would receive the XML message, trasformed with XSLT, inserting it to Oracle using XML SQL Utility and respond back, but that was for Oracle 8i. I wonder if 9i and XDB has a better tool (or a built in Servlet or Listener) that basically does the same.
Thanks for your help.

If you can make the source app to an HTTP Post to the Oracle XML DB repository, and POST contains a schema based XML document you can use a trigger on the default table to validate the XML that is posted. The return message would need to be managed using a database trigger. You could raise an HTTP error which the source App would trap....

Similar Messages

How to send te XML data using HTTPS post call & receiving response in ML

ur present design does the HTTP post for XML data using PL/SQL stored procedure call to a Java program embedded in Oracle database as Oracle Java Stored procedure. The limitation with this is that we are able to do HTTP post; but with HTTPS post; we are not able to achieve because of certificates are not installed on Oracle database.
we fiond that the certificates need to be installed on Oracle apps server; not on database server. As we have to go ultimately with HTTPS post in Production environment; we are planning to shift this part of program(sending XML through HTTPS post call & receiving response in middle layer-Apps server in this case).
how i can do this plz give some solution

If you can make the source app to an HTTP Post to the Oracle XML DB repository, and POST contains a schema based XML document you can use a trigger on the default table to validate the XML that is posted. The return message would need to be managed using a database trigger. You could raise an HTTP error which the source App would trap....

How to receive a xml CDATA in string element when OSB calling a webservice?

How to receive a xml CDATA in string element when OSB calling a webservice?
I have a business service (biz) that route to operation of a webservice.
A example of response to this webservice legacy:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:eg="example">
<soapenv:Header/>
<soapenv:Body>
<ex:executeResponse>
<ex:arg><![CDATA[<searchCustomerByDocumentNumberResponse>
<name>John John</name>
</searchCustomerByDocumentNumberResponse>]]></ex:arg>
</ex:executeResponse>
</soapenv:Body>
</soapenv:Envelope>
the type of ex:arg is a string.
How to receive this CDATA structure to webservice in OSB?

Similiar to the answer How to pass a xml CDATA in string element when OSB calling a webservice?
Use the xquery function fn-bea:inlinedXML rather than fn-ben:serialize
Steps to solve this problem:
1. Create a XML Schema. E.g.:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
elementFormDefault="unqualified">
<xs:complexType name="searchCustomerByDocumentNumberResponse">
<xs:sequence>
<xs:element name="name" minOccurs="0">
<xs:annotation>
<xs:documentation>
</xs:documentation>
</xs:annotation>
<xs:simpleType>
<xs:restriction base="xs:string" />
</xs:simpleType>
</xs:element>
</xs:sequence>
</xs:complexType>
<xs:element name="searchCustomerByDocumentNumberResponse" type="searchCustomerByDocumentNumberResponse"></xs:element>
</xs:schema>
2. Create a XQuery to create a searchCustomerByDocumentNumber ComplexType. E.g.:
3. Create a XQuery Transformation (XQ) to get the CDATA response to the webservice legacy. E.g.:
declare namespace ns0 = "novosiaws";
declare function xf:getReponse($searchCustomerByDocumentNumberResponse as element(ns0:searchCustomerByDocumentNumberResponse))
as element(searchCustomerByDocumentNumberResponse) {
fn-bea:inlinedXML($searchCustomerByDocumentNumberResponse/ns0:arg)
For more information about xquery function:
fn-bea:inlinedXML
The fn-bea:inlinedXML() function parses textual XML and returns an instance of the XQuery 1.0 Data Model.
The function has the following signature:
fn-bea:inlinedXML($text as xs:string) as node()*
where $text is the textual XML to parse.
Examples:
fn-bea:inlinedXML(“<e>text</e>”) returns element “e”.
fn-bea:inlinedXML(“<?xml version=”1.0”><e>text</e>”) returns a document with root element “e”.
Source: http://docs.oracle.com/cd/E13162_01/odsi/docs10gr3/xquery/extensions.html

How to parse thus XML data?

Hi,experts:
In below thread:
Receiving .Net dataset with deployed proxies
i asked how to create a external definition in IR base on above XML data.
Now,i have created a XSD file base on the XML data.And importing it into IR successfully.
<?xml version="1.0" encoding="utf-8"?>
<xs:schema id="NewDataSet" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
<xs:element name="NewDataSet" msdata:IsDataSet="true" msdata:Locale="zh-CN">
<xs:complexType>
<xs:choice maxOccurs="unbounded">
<xs:element name="Status">
<xs:complexType>
<xs:attribute name="Result" type="xs:string"/>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>
And now,the question is how to parse the XML data in diffgr:diffgram segment.It seems a MS-XML syntax.Can it be parsed by XI?
I tried,but the following error occurs:
com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:ZMT_SD_ORDER01_RESULT. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start

Hi,
The above Exception seems to be because of mapping error.
Check your mapping for all the mandatory 1-1 mapping, also the 1-unbounded parent node mapping.
Once when you import the XSD and activate your External Definition if it does without any error then there is no problem with your External Definition.
If this error occurs only when you test your mapping then this is mapping error and not because of XSD.
Please check the parent node mapping like 1-unbounded.
Reward Points if useful
Regards
Ashmi.

Sending xml data through http services in adobe air

Hello every one,
I am stucked with a problem using httpservices,
Here's my code
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
                       xmlns:s="library://ns.adobe.com/flex/spark"
                       xmlns:mx="library://ns.adobe.com/flex/mx" creationComplete="login();">
    <fx:Script>
        <![CDATA[
            import mx.controls.Alert;
            import mx.rpc.events.FaultEvent;
            import mx.rpc.events.ResultEvent;
            [Bindable]
            private var reqData:XML = new XML();
            protected function userRequest_resultHandler(event:ResultEvent):void
                // TODO Auto-generated method stub
                Alert.show(event.result.toString());
            private function login():void
                trace("username " +username.text)
                trace("password " +password.text)
                trace("request"+userRequest.request.toString());
                 reqData =<ApplicationReq>
                    <InsType>"1"</InsType>
                    <RequestType>"3"</RequestType>
                    <TrackID>"22222222"</TrackID>
                    <Mode>"2"</Mode>
                    <ApplicationID>"11"</ApplicationID>
                    <CompanyID>"1"</CompanyID>
                    </ApplicationReq>
                var params:Object = {};
                params["username"] = "admin";
                params["password"] = "admin@123";
                userRequest.send();
                //userRequest.send();
            protected function userRequest_faultHandler(event:FaultEvent):void
                // TODO Auto-generated method stub
                Alert.show(event.fault.toString());
        ]]>
    </fx:Script>
    <fx:Declarations>
        
        <s:HTTPService id="userRequest" url="http://ins.dgsecure.com/gui/xmltest3.php"
                       useProxy="false" method="POST"
                       result="userRequest_resultHandler(event)"
                       resultFormat="xml" fault="userRequest_faultHandler(event)">
            <s:request xmlns="">
                    <ApplicationReq>
                        <InsType>"1"</InsType>
                        <RequestType>"3"</RequestType>
                        <TrackID>"22222222"</TrackID>
                        <Mode>"2"</Mode>
                        <ApplicationID>"11"</ApplicationID>
                        <CompanyID>"1"</CompanyID>
                    </ApplicationReq>
            </s:request>
        </s:HTTPService>
    </fx:Declarations>
    <s:TextInput id="username" x="441" y="160" />
    <s:TextInput id="password" x="442" y="196"/>
    <s:Button x="459" y="244" label="login" click="login()"/>
</s:WindowedApplication>
if i set the content type to"application/xml " its giving RPC error, else if the data going to the server through encoding like Xmlrequest = %&ddgG&&ddjkjdj3d
how to getout of this problem and how can i send the total xml data with http request

Hi,
Xcelsius/Dashboards will convert the range of values that you want to send into XML.
It then will POST the XML when it calls the web page.
For example, if you had created three ranges to send to your web page:
A (a single cell)
B (a single cell)
C (a row of three cells)
The data in the POST input stream for the web page will look something like this:
<data>
<variable name="A">
    <row>
      <column>10</column>
    </row>
</variable>
<variable name="B">
    <row>
      <column>15</column>
    </row>
</variable>
<variable name="C">
    <row>
      <column>1</column>
      <column>2</column>
      <column>3</column>
    </row>
</variable>
</data>
I don't have an example for ASP, but I do for a JSP (attached).
Regards
Matt

How to integrate the XML data received via email in to MySQL

Hi,
This is JK, my compnay is planning to adopt Adobe Livecycle Barcoded forms technology, We are planning to automate the Weekly report submission of the HR dept of my company, where the various employees from various branches will be submiting their weekly reports thru Barcoded forms via email and the data has to be fed in to a MySQL database for Analysis purpose.
The problem is, i have designed the form and tested it, when i fill out the form and submit it via email, i get a XML to the mentioneid email id, but is it possible to import the bulk amount of XML data received thru email to the MySQL database without using 3rd party XML Parser.
Does Adobe Livecycle supports any functionality where these data's after decoding or received thru email can directly be integrated in to MySQL.
Any Suggestions?
Regards,
JK

One thing that should be clear is that you do not need to purchase Reader Extensions to use Barcode Forms technology. Take a look at the 2 articles at the bottom of http://www.adobe.com/products/server/barcodedpaperforms/ they talk specifically about this issue.
However, if you do not get RE with your Barcoded Forms license your end users will not be able to save the form off-line or submit electronically (other than data-only by email). They will be able to fill-in and print the forms only.
By your post it sounds like you are getting Adobe LiveCycle Barcoded Forms and you have also licensed the decoder.
The decoder itself works with a watched folder mechanism. So what you can do is create a small Java program that simply waits for decoded output from the output directory of the decoder and then populates your MySQL database. The code should be around a day to implement.
Here is the link to the deployment article that talks about the RE requirement: http://www.adobe.com/products/server/barcodedpaperforms/pdfs/deploying_2d_barcodedpdfform s.pdf
Your Java will basically do something like this (very incomplete sample)
public class theThred extends Thread {
public void start() {
public void run() {
while (true) {
checkTheDirectoryCodeHere();
gotSomethingWriteItHere();
sleep(foreSomeNumberOfMilliseconds);
public void checkTheDirectoryCodeHere() {
Directory dir = new Directory("thePath");

How to Change the XML data that got stuck up in XI

Hi,
I am executing a scenario which sends the data from HTTP client>Xi->SAP(R/3 4.6).We are queuing the messages in XI, through QoS EOIO.Sender side we have configured the HTTP adapter and on receiver side we have configured RFC adapter.RFC at receiver side throws an exception, if I try to call rfc from XI by sending wrong data to it from HTTP client.The message which is failed gets stuck up in the queue , whose status will be shown as System Error.So, No messages will be further processed from that queue.
Our Requirement is, We need to manually change the xml file which is failed while trying to post data in to SAP.Could any one help me to find where the Failed xml file gets stored in XI and how can we change the file .
Regards,
Kiran kumar.

Mario,
This is possible from SP 19 onwards...
Have a look @
/people/gourav.khare2/blog/2007/02/28/sapxi--message-editing-150-responsibility-and-liability-150-sp19
Also, the comments in the blog. Really good
http://help.sap.com/saphelp_nw04/helpdata/en/43/4a576b5b7430f3e10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/4a576b5b7430f3e10000000a11466f/frameset.htm
Regards,
Jai Shankar

How to submit pdf xml data to a file server

Hi, I am hoping someone can help me. I have created a dynamic pdf in livecycle designer ES, which appears as the requester wants it to. I now just need to work out how to collect the submitted data. Is it possible to submit the xml data to a file server? I have succeeded in emailing the data, but each response is separate xml attachment and would then need to collated, etc. It would be preferable to submit the data directly to a file server if this is possible. Even if it submitted into a database or something. From everything I have read so far, it seems that this is not possible, unless I am missing something. As a newbie to this, any assistance would be much appreciated. Thank you.

You can submit the data as XML or URL-encoded data (HTTP POST). In either case you will need to have a server-side process to receive and parse the data stream. The server-side process may be a JSP, a servlet, PHP or any technology that can manage HTTP requests/responses.
See About submitting data using a button at http://help.adobe.com/en_US/livecycle/9.0/designerHelp/000330.html .
Steve

Interactive Gantt chart - how to receive updated XML after user changes

Hello,
I failed to receive changed XML after user updates.
I've constructed following example:
Created context attribute of type XSTRING, binded it to the "dataSource" property of the Gantt chart control.
I pass following XML to the control:
<?xml version="1.0" encoding="iso-8859-5" ?>
<SAPJNetData version="1.0">
<Application type="GANTT" version="1.0" />
<TypeRepository version="1.0" href="/SAP/BC/WebDynpro/SAP/ZT_INV_WDR_TEST_GANTT/gantPR02P00086_3_tr.xml" />
<UserInterface version="1.0" href="/SAP/BC/WebDynpro/SAP/ZT_INV_WDR_TEST_GANTT/gantPR02P00086_3_ui.xml" />
<Graph type="Gantt.Graph" version="1.0">
<rows>
<row id="001" />
<row id="002" />
<row id="003" />
</rows>
<dates timeZone="GEurope/Berlin" locale="de_DE" format="dd.MM.yyyy" dateEnd="20.01.2010">
<section date="01.01.2010" unit="DAY" unitSize="20" />
<calendarItem id="Cal.1stDayInMonth">
<repetition unit="MONTH" />
</calendarItem>
<calendarItem id="Cal.1stDayInWeek">
<repetition unit="WEEK" />
</calendarItem>
</dates>
<view>
<viewpos date="01.01.2010" />
</view>
<chart id="Dummy">
<timeScale>
<section index="0">
<ribbon type="Gantt.CProjects.Ribbon.Month" />
<ribbon type="Gantt.CProjects.Ribbon.3Days" />
</section>
</timeScale>
<grid type="Grid.CProjects.Gantt.TimeLine" calendarIDs="Cal.1stDayInWeek" />
<table type="Gantt.Table" id="CProj-Table">
<defaults typeCell="L.Table" typeHeader="L.Table" />
<tree showRootIcons="TRUE" />
<cols showInitially="4">
<ids>TREE,ID2,ID3</ids>
</cols>
<header>
<header width="30" />
<label colid="TREE" width="250">Этап</label>
<label colid="ID2">Дата с</label>
<label colid="ID3">Дата по</label>
</header>
<rows>
<ids>001,002,003</ids>
</rows>
<row>
<header>1</header>
<tree>Top Item</tree>
<label>01.01.2010</label>
<label>20.01.2010</label>
</row>
<row>
<header>2</header>
<tree parentRow="001">Subitem 1</tree>
<label>01.01.2010</label>
<label>10.01.2010</label>
</row>
<row>
<header>3</header>
<tree parentRow="001">Subitem 2</tree>
<label>11.01.2010</label>
<label>20.01.2010</label>
</row>
</table>
<graph>
<view>
<backColor type="White" />
</view>
<node id="001" type="Gantt.CProjects.SummaryNode" rowID="001">
<dates>
<date>01.01.2010</date>
<date>20.01.2010</date>
</dates>
</node>
<node id="002" type="Gantt.CProjects.Node" rowID="002">
<dates>
<date>01.01.2010</date>
<date>10.01.2010</date>
</dates>
</node>
<node id="003" type="Gantt.CProjects.Node" rowID="003">
<dates>
<date>11.01.2010</date>
<date>20.01.2010</date>
</dates>
</node>
</graph>
</chart>
</Graph>
</SAPJNetData>
Then I run my example application, press standard "Save" button in Gantt chart control.
After that my XML in context changes, but it's incorrect. There is no <graph> tag at all - this tag should contain all significant parameters of the chart.
The resulting XML below:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<SAPJNetData build="9295" date="04-Aug-2010 10:19:13" host="localhost" version="1.1247">
<Application type="GANTT" version="1.0"/>
<TypeRepository href="/SAP/BC/WebDynpro/SAP/ZT_INV_WDR_TEST_GANTT/gantPR02P00086_3_tr.xml" version="1.0"/>
<UserInterface href="/SAP/BC/WebDynpro/SAP/ZT_INV_WDR_TEST_GANTT/gantPR02P00086_3_ui.xml" version="1.0"/>
<GraphGantt version="1.1247"/>
</SAPJNetData>
All the chart in fact has completely disappeared. There is nothing left but file header.
The question: How to get XML with all user changes back from the Gantt chart control?

Long time, hah..
Anyways thanks to behave like a responsible person on SCN and taking care of your threads..
Liked.

How to use Load XML Data (Home Utilities Data Load/Unload Load)

How is Load XML Data (Home>Utilities>Data Load/Unload>Load) supposed to work? Where is this documented?
What table type/structure is required?
How does this related to XDB functionality?

It's not really documented that well in the XE redux documents (or even the base Apex Documents)- see http://download-west.oracle.com/docs/cd/B25329_01/doc/appdev.102/b25309/sql_utl.htm#sthref2530
However, it's reasonably easy to use - you can export a table to XML format, and then reload the table with the data by importing the XML document. It has nothing to do with XDB, it's just a different flat file representation for unloaded data than CSV

How to model a XML Data Source

Hi Experts,
I have to model a XML Data Source. Usually I have to load texts and attributes separately (for 'normal' data sources). But I have only one xml file. Should I design one 'big' data source and accordingly one 'big' info package for all the xml data? Or should I create several data sources for one xml file?
Best Regards,
Denise

hi Denise,
as far as i know,
the function xml datasource is generated after we assign infosource with 'flat file' source system, so if you do it from infosource of master data, then you may need separately as 'normal' datasources. if you want to go with the 'big' and 'big' (datasource/infosource and infopackage), then you can create a 'big' infosource with transfer structure fields sequence same as xml structure, and set the master data characteristics to be update as 'infoprovider' (rsa1->infoproviders->choose infoarea and right click 'insert characteristic as infoprovider', then create update rules for these characteristics and assign it with 'big' infosource.
doc how to send xml if you haven't look
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9f7f8f95-0501-0010-f5ba-f19167ef74c4
hope this helps.

How i can transfer XML data from internet to SAP R/3?

Hi all,
I have an issue to catch data from internet (perticular website) in xml format and i want to update that xml data format into SAP R/3 database. so how i can do that?
Can I do directly or i should use any third party tools?

Hi Deepak,
Refer these two weblogs,
/people/bhavesh.kantilal/blog/2006/11/20/webservice-calls-from-a-user-defined-function
/people/jin.shin/blog/2007/05/21/handling-web-service-soap-fault-responses-in-sap-netweaver-xi
I hope, this will solve your problem
Regards,
Deviprasad

How to Edit a XML data file from AS3 class...

Hi...
             I need to edit an XML data file I have at the exit of application.... I have a demo code which is not working....
This is the code :
public function UpdateData():void
               trace("Closing....");
               var FileData:XML=<Hello>Hai</Hello>
               var urlLdr:URLLoader = new URLLoader();
               var urlRqst:URLRequest = new URLRequest ("AppData.xml");
               urlRqst.data=FileData;
                urlRqst.contentType = "text/xml";
               urlRqst.method = URLRequestMethod.POST;
               urlLdr.load(urlRqst);
This AppData file already exist and has some data in it.
    Plus :
   How to find the application is exiting.

use: fscommand('Quit');
to exit your app.
and this is how you would use the urlloader class to save data:
public function UpdateData():void
         trace("Closing....");
          var FileData:XML=<Hello>Hai</Hello>
var urlVar:URLVariables=new URLVariables();
urlVar.fileData=FileData;
            var urlLdr:URLLoader = new URLLoader();
           var urlRqst:URLRequest = new URLRequest ("this must be an executable to parse and write data");
           urlRqst.data=urlVar;
           urlRqst.contentType = "text/xml";
               urlRqst.method = URLRequestMethod.POST;
              urlLdr.load(urlRqst);
but i don't think you can use an executable on a fl4 device so you will need to use a different class. i don' know how you're storing an xml file on a fl4 device but you should be able to use the sharedobject to read and store xml.

How to load the XML data of SAP to a target database

i use an IDocs to read from SAP and converted into XML (ie .XSD ) and now i want to move that XML data to target data base.
i am trying to move XML data to template table, but i am getting this mapping error , even though i used NRDM and mapping while moving to template table.
ERROR MESSAGE :
Invalid mapping expression for column <Query_1.SNDPRN>. Additional information: <Cannot parse expression.
Table <Query.EDI_DC40> for column <SNDPRN> does not occur in the FROM clause. For a top-level query, all columns must belong to some table in the FROM clause.. (BODI-1112351)>. (BODI-1111081)

Hi Srikanth,
Please find my understanding below.Correct me if my understanding is wrong.
1)You have moved the data from IDOC to XML file (i.e Creating an XSD and using it as target).
2)Now this XML file, will you your source and you are going to load it into the target table.
The error looks like BODS is unable to parse the Hierarchy structure to the flat structure.
How are you un-nesting your data (Are you using XML pipeline) .
Thanks
Arun.

How can I embed XML data in a PDF?

I want to embed XML data in a PDF so the file can be scanned for the data behind the document. Is there a standard way to do this?
For example, if the PDF is a bank statement, the embedded XML would be the individual's account number and bank balances. It would not include any of the standard text in the statement such as the bank name, etc.
I've read up on the XMP spec but that seems to be more metadata about the document (title, subject, etc.). And there is tagged content but that is an alternate view of the entire document.
??? - thanks - dave

Although the XMP block is stored in XML, you can't just embed any XML file. The block has to follow the standard, which means that each data packet needs to be defined in a schema - as the name suggests, XMP is eXtendable so you can define new schema for local use, but you can't mess about with the standard ones and randomly add new tags. The schema itself isn't embedded in the file, it's referenced by a unique ID and URI. of course having a data packet in a custom schema doesn't mean any software will see it - Acrobat's Advanced Search can be told to scan the XMP block but search engines only tend to bother with the basic tags such as 'title' and 'description'.
To see what's currently in a PDF, open Document Properties > Description > Additional Metadata > Advanced.
You can save the current XMP block as a text file (.xmp extension), and replace/append other XMP files. If you click the "i" icon on the top right of the Advanced dialog you can access system profiles - these can be created in other applications such as Bridge, but there's no profile manager in Acrobat itself.
For technical information on working with XMP and creating new schema, see http://www.adobe.com/devnet/xmp.html
Note that the XMP SDK for CS6 does not work in the Acrobat Family.

How to receive a XML data thru' HTTP

Similar Messages

Maybe you are looking for