How to reclass asset

Dear all,
I want to reclass an existing asset from one asset class to another.
I've run mar 2009 depreciation. but I need to reclass this asset back to 01.01.2009.
What should I do? Dispose and create? Transfer?
Thx.

Hi,
This depends on the definition of transfer transaction. In AO75 transaction you can define the rules for depreciation start. You can define that this date will be adopted from the original asset and not taken from the transfer date.
Regards,
Eli

Similar Messages

How to link asset with purchase order and PO Item.

Hello,
I have to generate a report which contains columns
Asset No , po no(ebeln) ,PO Item(ebelp),Material no etc
My query is how to link asset with purchase order and PO Item.
I am selecting asset and po no. from anla but how to get
po item no(ebelp)?
po line item is important in this report because every line item has differrent asset and material no.
i tried to match asset no in mseg table but i am not getting asset no in mseg .
how should i proceed ?

Thanks Thomas & Srimanta for the quick response.
When I checked EKKN table by entering PO there is no asset no. in anln1 field.
Also I would like to add that, In me23n for a PO, account assignment category we are entering 'F' for internal order settlement.
Where can i find the link between asset and po no(ebeln) and po item(ebelp)?
Regards,
Rachel
Edited by: Rachel on Aug 11, 2008 7:23 AM

How to reclass a gl account?

Dear,
How to reclass a gl account?
Thank you

Hi,
Refer to this link to see how to work with validations:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/5b/d231d443c611d182b30000e829fbfe/frameset.htm
Or search SDN forum; there are hundreds of threads on this theme.
Regards,
Eli

How to Purchase Asset through Purchase Order

Hi SAP Gurus,
Can aby one explain me How to Purchase Asset through Purchase Order.
Thanks in Advance,
Warm Regards,
Balaji Bhonsle

Hi,
Following are the important parameters, however these can vary depends upon business process.
Account type : A
Account assignment in line item level :
GL account
Internal order / Cost center
Asset number
Best Regards,
Madhu

How to organize assets in Adobe Audition

I've been exporting my Premiere Pro sessions to Audition for mixing and have liked the flexibility of what Audition can do. But I've also been completely baffled by how one organizes assets in an efficient way (such as using folders or bins like in After Effects or Premiere). I'm only editing a :60 trailer and I'm getting lost trying to find the files I need. I can't imagine trying to do audio-post on a short film (or god forbid any kind of feature) if this option doesn't exist. I've googled around and have found people asking this questions since 2009, with none of them answered.
Sometimes this sort of thing happens and I'm pleasantly surprised that there's an easy option I somehow missed.
Often times, I'm convinced that if Adobe built automobiles like it makes software, the cars would have no turn signals or headlights.
I'm afraid we have a "headlight" moment here. Please, someone prove me wrong.
Thanks for any help.

Yes, the over-arching project, and the organisation of assets into bins is the making of Premiere. All the audio files I use in my Premiere projects have been edited in Audition, using the round trip method from within Premiere. With care I can put the extracted audio files from Premiere within my Windows folder structure for the video project. Left to itself, Audition puts them in an obscure corner of my User folder within the Windows installation - the last thing I want in there is multi-megabyte audio files.
I have often wondered how you guys who work primarily with audio and no attached video cope with project organisation. Even with my Premiere based use of Audition, a project/"bin" based structure for Audition would be very useful. This is because I extract the audio from all my video files, and then work exclusively in Audition. Finally, when the audio edit is done, I import my nice clean audio files back into Premiere.

How to delete assets in MUSE especially photos in slideshow - keeps making a copy on preview this

How to delete assets in MUSE especially photos in slideshow - keeps making a copy onevery preview this is so wrong - really worried this profgram sucks

thumbnails can be deleted in the MUSE S/Show window - this seems to delete all instances of photo in the slideshow. However the slideshow widget needs improvment keep submitting to Adobe request for features and included a pause button!!
The Layers Tab did not work for me?

How to purchase assets using internal orders?

How to purchase assets using internal orders? Also how do AuC's turn into assets?

Hi,
Review the link below
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=4&ved=0CEEQFjAD&url=http%3A%2F%2Fhelp.sap.com%2Fbp_blv1600%2FBL_CA%2FDocumentation%2FScenarios%2FV8K_BPP_EN_CA.doc&ei=ZRw8T5ODGYKN0QHX8Om-Cw&usg=AFQjCNGWPZ8CseftCgue2pZZmdnfyLfY9g&sig2=l1ZFy5LrVjLZA-dfGF4Ibg
Regards
Carlos
Edited by: Carlos Gonzalez on Feb 15, 2012 4:01 PM

How to generate Asset Projections

Hi,
Can I know how to generate Asset Projections ?

Hello
Once Asset accounting is configured and you have created asset for different asset classes, projections can be generated and displayed in Asset Explorer option
Within asset explorer, you have varied options to project depreciation for the year, next year and so on
Also you can project the year end values.
The information is statistical and information displayed is for a particular asset only.
Please check the information systems for specific reports
Reg
assign points if useful

How low value asset of multiple qty is treated in PO?

Hi
My client is purchasing 50 chairs and they have given 50 asset codes and in the account assignment tab for each quantity separate asset code they have to give but doing this manually is time consuming and how to adress this and how to do this fastly and
my client is also asking is there any way of assigning the asset codes after we receive the goods ( like sub number option)
regards,
Sanjana

HI,
My client is purchasing 50 chairs and they have given 50 asset codes
Why you are creating asset code for Qty ,not for material code like chair =this asset code
Regards
Kailas Ugale

How to change asset class of an asset and problem in AS08.

Hi All,
The user has given wrong asset class and created asset masters.For the same assets, he has done capitalisation and executed settlement in KO88.
Now when we try to reverse the document in AB08,by default it goes to KO88 screen and if we reverse select reverse optiion in test mode, system is picking up some other entries.
Is it possible to revrse asset documents once settlement is done.If not how should we change the asset class of those assets.
I need your help on this.
Thanks,
Kumar
Edited by: KUMAR on Sep 24, 2009 8:35 AM

Hi,
from my knowledge it should be possible to reverse the entries.
If it is only a problem of wrong categorization of assets, you can create a new asset in the asset class you need, and then transfer the asset completely to the new asset (tcode ABUMN).
Regards,
Markus

How to configure asset impairment ECC6.0

Hi,
Our client is looking to enable asset impairment functionality in SAP. An asset impairment is different from a revaluation. Revaluation occurs when a business adjusts the assets prices from a mark to market perspective. An impairment occurs when the business realizes the assets it possessu2019 are worth more or less then what is declared on their balance sheet. SAP FA has standard transactions for revaluation of assets and allows to determine the GL accounts in transaction (AO90 under revaluation account assignment) but nothing for impairment.
I know there are several options listed on the forum to post an impairment but none provide the end result I am looking for
The closest option I have is using ABAVN with a partial retirement (but the posting is wrong).
The client provided the following example:
Facts:
u2022Fixed asset with original cost of $100
u2022Original useful life of 10 yrs
u2022Straight-line depreciation
u2022Impaired to $50 at end of 2nd year (after $20 of depreciation) expense
u2022No expected change in useful life
The related posting must be:
-50 cr. FA acquis
20 dr. Acc. Depr.
30 dr. impr loss (P&L)
After the impairment posting the depreciable base is 50, original useful life is 10, and remaining useful life is 8.
The asset would continue to depreicate at a rate of 6.25 per year for 8 years.
Has anyone configured this in their system?
Thanks,
Kuldeep

Hi,
Please find detailed information provided by SAP.
Impairment
Prerequisites
● If you are using the new depreciation calculation, you have activated the FIN EA-APPL add-on.
● You have created the following new transaction types:
○ Transaction type for impairment according to IAS36 (debit) for current year (transaction type group A2)
○ Transaction type for impairment according to IAS36 (debit) for prior year (transaction type group A1)
○ Transaction type for impairment according to IAS36 (credit) for current year (transaction type group A2)
○ Transaction type for impairment according to IAS36 (credit) for prior year (transaction type group A1)
● You create the transaction types in Customizing:
○ For new General Ledger Accounting under Financial Accounting (New) ® Asset Accounting ® Special Valuation® Revaluation of Fixed Assets ® Revaluation for the Balance Sheet ® Define Transaction Types for Revaluation
● For each depreciation area, you have specified that impairments can be posted both as revaluation of acquisition and production costs and as depreciation revaluation:
○ For new General Ledger Accounting under Financial Accounting (New) ® Asset Accounting ® Special Valuation® Revaluation of Fixed Assets ® Revaluation for the Balance Sheet ® Determine Depreciation Areas
● If you want to perform different impairment postings depending on different accounting principles, then you have restricted the transaction types to depreciation areas that use the same accounting principles:
○ For new General Ledger Accounting under Financial Accounting (New) ® Asset Accounting ® Special Valuation® Revaluation of Fixed Assets ® Revaluation for the Balance Sheet ® Define Transaction Types for Revaluation ®Limit Transaction Types to Depreciation Areas
● For posting impairments in the general ledger, you specified for each depreciation area that revaluation is taken into account during the depreciation posting run:
○ For new General Ledger Accounting under Financial Accounting (New) ® Asset Accounting ® Integration with General Ledger Accounting ® Post Depreciation to General Ledger Accounting ® Specify Intervals and Posting Rules.
Process Flow
1. You use the asset list to create a worklist containing the relevant assets. From the SAP Easy Access screen, choose Accounting ® Financial Accounting ® Fixed Assets ®Environment ® Worklist ® Generate. ChooseImpairment Posting as the task for the worklist.
2. You specify how the system should post the impairment:
○ As negative revaluation of the acquisition and production costs to reduce the acquisition value (standard setting)
○ As depreciation revaluation, that is, as an increase in the amount of accumulated depreciation
3. You specify the transaction types that the system uses to generate the impairment postings for the current year and the previous year.
4. You specify how the system should distribute the impairment amount to the individual assets. You have the following options:
○ Distribution of the impairment amount dependent on the net book value
The system distributes the total amount of the impairment proportionally based on the net book value of the individual assets.
○ Customer-specific distribution of the impairment amount
The system distributes the total amount of the impairment based on your customer-specific specifications that you define using the Business Add-In (BAdI) BAdI for Distribution of Impairments (FIAA_IMPAIRMENT_DISTR_CUST). You can also use this BAdI to import an external file in which you have specified the impairment amounts at the level of the individual assets.
○ Distribution of the impairment amount to a net book value of zero
Regards

How to restrict Asset Books LOV in the Asset creating work bench

Currently when users try to create Assets, they are able to see all the Corporate Books in the Book field. We want to restrict this LOV to show only book/s relevant for that Operating Unit.
Regards,
Ravi

Asset Book security by responsibility is possible.
Please review the user guide/white paper.
Here is the note.
Subject: Attaching existing depreciation book to organization hierarchy
Doc ID: 139518.1 Type: BULLETIN
Modified Date: 22-OCT-2008 Status: PUBLISHED
This article is being delivered in Draft form and may contain
errors. Please use the MetaLink "Feedback" button to advise
Oracle of any issues related to this article.
Purpose
Security by book is new feature for Release 11i. The purpose of this document
is to describe how to attach existing depreciation book to asset organizations.
This can useful mainly for customers after upgrade to 11i.
Prerequisites
Following steps assume an Asset Organization is already defined.
Step by step instructions
1. Query for your Asset Organization in Organization Window:
Navigator -> Setup -> Security -> Organization -> Description
Select "Asset Organization: from "Organization Classifications"
2. When you are in the Organization form, click the Others button.
The Book Controls window will appear.
3. Query up the existing book that you wish to attach to the organization
or you can create New Asset book.
4. In order to save this book to the organization, the form trigger must recognize
that a change has occurred to the book information. To create a simple change
that will enable the Save function to work, enter the Description field and simply
add a space at the end
5. Navigate to the File menu and select File: Save. Although there is no visible
alteration to the book information, the form will now be able to save the book
to your organization.
RELATED DOCUMENTS
ORACLE APPLICATIONS WHITE PAPER Security by Book, from 24-MAR-2000
Oracle Assets Users's Guide, Setting Up Security by Book, page 9-60

How to delete asset in Oracle R12 in a status "posted"

Hi all,
We upload about a lot(about 10 000) assets from mass addition template and run post mass addition. All the assets are all in the status "posted" and we just realized that we uploaded in the wrong period.
How can we delete all those assets.Please help with the steps.
Thanks

hello
please read the full document here:
Fixed Assets Mass Additions White Paper [ID 111097.1]
Delete Mass Additions is part of the “Clean Up” process that is supplied by
Oracle Assets. When reviewing your mass additions lines, you can place
lines that should not become assets in the DELETE queue. The Delete
Mass Additions program will take the following mass additions and place
them in the interim table FA_DELETED_MASS_ADDITIONS and delete
them from the FA_MASS_ADDITIONS table.
· Mass additions in the SPLIT queue for which you have already posted
the child mass addition lines created by the split.
· Mass additions in the POSTED queue that have already become assets.
· Mass additions in the DELETE queue.
i'll be grateful if inform me about the results.
bests

How to change Asset Capitalization date ?

Hello
All Experts,
I want to chnage asset capitilizatio date so how can I ?
Experts guidance is needed.
Regards,
Pankaj.

Hi,
You can change the asset cap date at any point of time using AS02.
But the date in the First acquisition on cannot be changed, since it is a display field.
At the time of changing the cap date, system will shows an warning message like below.....
You should no longer change the capitalization date
Message no. AA225
Diagnosis
You have changed the asset capitalization date.
You can make this change, however this warning should make you aware of the consequences of such a change.}
And what is the business requirement to change the cap date?, since if you have already posted the dep posting, it doesnot make any adjustment to it.
Thanks,
Srinu

How to reclass WBS via secondary cost element

Hi team,
How can I reclass WBS A to WBS B via secondary cost element A1234567? For example, For CNY (LC1), I need to input certain amt, but for USD (LC2),I have to force in zero. When I do correction via manual allocation (KB15N), only USD currency is available for input.
Appreciate your feedback.
Thanks.

Hi,
In FB01 you need to use primary cost element, secondary cost element is internal to CO. In your case since that is a rectifaction and you want to eliminate the value in one currency you would need to follow the manual process. You can use same general ledger account for debit and credit with different WBS assigned so that there is no impact in FI and the values are transferred from one WBS to another.
Kind Regards // Shaubhik

How to reclass asset

Similar Messages

Maybe you are looking for