How to record a plug-in modular keyboard ?

Hi all ,
I just bought logic express 8 an software called Moog modular V ( from arturia ) which is a virtual modular keyboard . The thing is when I' m recording , I also would like to record the changes of sounds I make while playing but it would only record the whole track with the last change I made ( i mean a uniform track with the latest setting whereas I used several ones ) . Any help would change my life .
Ed

Hi Ed,
if you talk of a plugin, it's probably automatable, that means, while recording, enable the "latch" function just above the volume fader in the channelstrip. After recording, set it to "read". You could also use "write", but be advised this overwrites all existing automation. "Latch" only changes the parameters that you change. "Touch" only changes them until you let go on the controls and then resets them to the value they had before.
Fox

Similar Messages

  • How do i use garageband with external keyboard?

    i have a clavinova cvp-105 and am trying to hook it up with garageband to record muisc. I have a midi in and out to usb connected to my mac mini and garageband sees the midi divice, but wont record or even show the imput, even though it sees it. how do i make grageband use the keyboard?

    blackspectrume wrote:
    I have connected correctly ( to my knowledge)
    see the FAQ entry to be sure
    blackspectrume wrote:
     you cant record a electric piano with midi you have to use audio in and out... is that right/true?
    you can't record sound via MIDI:
    http://www.bulletsandbones.com/GB/GBFAQ.html#recordkeyboardssounds
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How to record my voice by headphone on mac mini

    Hi all,
    How to record my voice by headphone on mac mini. The headphone have a microphone. It can record on window 7, but on mac mini, it's not working.
    I don't know why. Please help me.
    Thanks.

    Open Quicktime Player
    File Menu: New Audio Recording....
    However... if the headphone/microphone combination has two 3.5mm jack plugs (pink and green) then the microphone output (pink) is "mic.level" - which is TOO QUIET for the audio input on a Mac, which is expecting the much stronger "line.level" signal strength.
    Solutions: get a microphone pre-amplifier between the mic and the Mac (not cheap); or a different microphone with a USB interface.

  • Plugging My Apple Keyboard Into a Powered USD Hub

    Hi!
    I'd like to use my Mbox (Version 1) with my Dual 867 Desktop, whenever I use Protools LE, while switching between Logic & PT LE, and as we all know Digi says the Mbox will not support being plugged into a USB Hub, or the connections on the keyboard, so I'll need to connect it to to one of the "onboard USB sockets."
    Well as you know the tower only has two connections. Currently, my USB Hub has my MIDI interface in it, but that will not work from the keyboards USB connections.
    So, my question is, will I have any problems if I plug the Apple keyboard into the hub, so I can use the newly open UsB socket in the tower for the Mbox?
    By the way, I've used Logic on my new Laptop with the Mbox and so far I've not had any problems, and this is with a song with tons of plugins and a fair number of tracks that I'd orignially recorded on the Dual 867 Desktop.
    Thanks for your help.
    G4 Dual 867 MDD, 1.5 Gig RAM, G4 15" 167GHz Powerbook w/1Gig RAM & Lacie 160Gig D2 FW800 Drive   Mac OS X (10.3.9) on both.   Logic Pro 7.1, ProtoolsLE 6.9, AW8 Soundcard, Digidesign Mbox1, ASR-10 Sampler, MOTU Fastlane MIDI,

    Have you had any problems with your machine not
    waking out of sleep mode? Just a rhetorical question
    Right!
    I really dunno. The last time I put my system in sleep mode (2 years ago , it was more of a "ETERNAL SLEEP" mode... as you've stated, sleeep is a no-no with pro audio systems.

  • How to demote to body from the keyboard in outline form?

    How to demote to body from the keyboard in outline form?

    This is the method i am using to populate a list.
    1- First of all you need to create a non-database list item for customer_name.
    2-create this procedure
    PROCEDURE populate_list_with_query
    --Populates the given list item with the specified query.
    (p_list_item in VARCHAR2
    ,p_query in VARCHAR2)
    IS
    /* Name the record group after the list item (no
    block prefix). */
    cst_rg_name constant VARCHAR2(30) :=
    GET_ITEM_PROPERTY(p_list_item,item_name);
    v_rg_id RECORDGROUP;
    BEGIN
    v_rg_id := FIND_GROUP(cst_rg_name);
    IF ID_NULL(v_rg_id) THEN
    v_rg_id := CREATE_GROUP_FROM_QUERY(cst_rg_name,p_query);
    END IF;
    IF POPULATE_GROUP(v_rg_id) = 0 THEN
    POPULATE_LIST(p_list_item,v_rg_id);
    /* Force display of first list element label
    in the list item. */
    COPY(GET_LIST_ELEMENT_VALUE(p_list_item,1),p_list_item);
    END IF;
    END populate_list_with_query;
    3- Create When-Create-Record on the block level and write this code
    BEGIN
    POPULATE_LIST_WITH_QUERY('bk1.customer_name',
    'SELECT customer_name, to_char(customer_id) FROM customer');
    END;
    In this example, the customer name is the (visible) list label and the customer ID is the (actual) list value
    i hope this will solve your problem ...

  • How do install new software without a keyboard??

    I just got the mac mini without bluetooth.
    I am looking to add Belkin bluetooth but I do not have a keyboard - How do install new software without a keyboard??

    casimirtad-
    Tis a bummer. It is not a bad idea to have a cheap usb keyboard and mouse around for future troubleshooting purposes, but I am not sure that will get you past this.
    Have you tried plugging stuff in to see if it works? I don't have a happy feeling that it will but it couldn't hurt to try.
    Luck-
    -DaddyPaycheck

  • How to record from an external source

    I recently bought a hp envy 17" and I cant figure out how to record onto this laptop.  I have to jacks on the left side, one with an icon of a headphones, the other with an icon of a headset.  I want to be able to take input a stereo jack to record into one of these and record into a program like Audacity.  Under device manager it says I have an ATI High Def Audio Device.  How do I record from an external source?  Thanks.

    @toolchic, first make sure that in the IDT HD Sound properties [right click the IDT ICON near the clock, which says "Controls IDT Audio Settings" on mouse over the icon], and choose "Open Audio control panel".
    Next choose "Recording > Settings". Here choose the input you want to record with. In your case choose "Integrated Microphone Array" on the top left. Click "Settings" just bellow, slide the bar to "10db boost" on the right, and slide the recording level bar about midway up [at the bottom of the window where all the volume controls for all recording devices are].
    While you/re there, it's a good idea to mute the "External mic", and mute any other recording device that you do not need. Next, click the "Processing" tab below the settings tab, and choose "Reduce noise". Leave all the others unchecked. for these will produce a not so nice sound. This helps to eliminate fan noise and other background noise in your recording.
    Now when you open your preferred digital audio program e.g.. Audacity [it's free and pretty easy to use, see link below], you can choose the INTEGRATED MIC ARRAY in the recording options. Choose that and then "arm" the track for recording [Usually an icon with R in the recording controls] Next click "record" to begin recording. Of course these steps depend on the digital audio recording program you're using.
    If you don't have a dedicated digital audio recording program, and if you have windows 7 or vista, you can record long sessions with the default Microsoft recording program [this program is useless in XP, for it only records for like a minute or so, maximum!. A dedicated program such as Audacity records depending on how much hard drive disk space, or close to that.
    @fritz, in essence, input jacks of most current notebooks, external computer mics are mono, but they use a  stereo mini jack [or 3 band, if I understood you correctly]. These are the same as regular earphone jacks. One band is signal, one is earth, and the other is +5 Volts to drive the condenser [these are known as "condenser mics"]. But if you use a dedicated studio type recording mic, then you need a dedicated preamp, and if it is a condenser as apposed to a dynamic mic, the preamp needs to supply what's known as "phantom power" [typically 45v] through the input jack where the mic is plugged into.
    However, if you record from the mic in/line in jack of a line out of say a mic preamp, channel mixer deck, CD/DVD/TV etc., then this has to be a stereo mini jack [has 3 bands]. Special cables with 2 [stereo] RCA jacks to mini jack are the ones to use. That is if the line out connector of your recording course is RCA [your typical TV/CD//DVD audio / video out or in are RCA connectors e.g..].
    Did this help?
    http://audacity.sourceforge.net/download/
    be-well

  • How can I change an english/american keyboard to a danish one?

    How can I change an english/american keyboard to a danish one on a Macbook Air?

    Apple menu / System Preferences / Keyboard / Input sources.
    Click + (bottom left) and in the pane that comes up, select Danish on the left, and click Add.
    Of course that can only change what the keys actually input, not what is written on the keys. If you wish to change the physical look of the keys as well, get in touch with Apple and ask if they can replace the keyboard.

  • How much recording time on my iphone 4 voice memo?

    How much recording time on iphone4 voice memo?

    I would suggest that it depends on how much free space you have on the phone. I have done voice memos of over an hour before, and have read of other users reporting larger ones. I do not believe there is any documented source of what size you can do.

  • How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

    How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

    iPod touch User Guide (For iOS 4.3 Software)

  • How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes.  This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.

    How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes.  This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.

    Hi Celia51510,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    I can't tell from your post if you are using a Windows or a Mac Computer.
    Try deleting the iTunes application and redownloading the version you need below:
    iTunes 11.1 Download for Mac
    http://support.apple.com/kb/DL1614
    iTunes 11.1 for Windows (64-bit)
    http://support.apple.com/kb/DL1615
    Cheers,
    - Judy

  • How can I set limitations on how many records a report can return

    I have a report on the web using Oracle Reports builder and I have the client enter in date parameters for the report that they want.
    Well with date ranges for different clients a different number of records are returned. Because of time it can take the report to return I want to limit the number of records that report can return.
    How can I go about doing that? I don't want to limit with date parameters because date won't really work for me. I need to limit on how many records can be returned. If it exceeds 10,000 records I want the client to refine the date range of schedule the report to run later. Meaning we will run that report. So I would have two check boxes if the count was over 10,000 do you want to define your date or schedule the job to run later.
    Can any one help me with this? How would I go about this?

    To know if the report is going to return more than 10,000 records, you first have to run the query with a 'select count(1) from ... where ...' (with the same from and where clauses as you normal query). Since this takes about the same time as runnng your report, I wonder if you really gain anything (although formatting may take some time too).
    You may simplify the select count(1) query by omitting all the lookup tables that are only needed for formatting. That way your query may run a lot faster. You can put this in your after parameter form trigger.

  • How can i change my macbook pro keyboard buttom english to arabic

    How can i change my macbook pro keyboard buttom english to arabic

    Apple does make and sell MacBook Pros with Arabic keyboards but, as far as I know, they're only sold in the Arabic market. You may be able to special order one: I don't know. You may even be able to order the keyboard only online or at your local Apple Store and have your English keyboard replaced. Again, I don't know.
    The best thing to do, if you're in the US, is to call Apple at 1-800-MYAPPLE. Tell them what you need and see how they might go about fulfilling your needs.
    Good luck,
    Clinton

  • How to install the plug-in for SQLServer 2000

    Hello, All,
    I am installing Oracle Migration workbench (10.1.0.4.0), want to migration data from SQL Server 2000 to Oracle. I downloaded omwb.zip file and sqlserver2k.zip plug-in. I put the plug-in in “plugins” folder during the installation, renamed it as SQLSERVER2K.JAR, and unzip it there, the unzip process generated two folders: META-INF and Oracle. There is a MANIFEST.MF file in META-INF folder, and in oracle folder, several small folders folder with a lot of .class files. I started the OMWB.BAT file in bin folder, I still get the error information: “No okugubs are installed. Please install…. “.
    I tried many times, including rebooted the machine and restarted the OMWB.bat ifle, but still got the same error message. It should be a simple problem, but I just can't install OMWB becasue of the plug-ins problem.
    Could anyone who installed the OMWB before and know how to solved the plug-in problems help me?
    I am thinking: do I need to put all of the .class files in the folders into the “plugins” folder directly?
    Thank you very much for your help.

    you should
    1- Download Omwb.zip & MySQL4.zip from Migration WorkBench WebSite
    2- Unzip Omwb.zip (suppose it is unziped in C:\omwb)
    3- Copy MySQL4.zip to C:\omwb\plugins and rename to MySQL4.jar
    4- Execute C:\omwb\omwb.bat for WorkBench
    Good Luck
    S.Ahmad Pourreza Ahmadi From IRAN

  • How to record a phone call in my iphone?

    how to record a phone call in my iphone?

    That's not a feature of the iPhone. You would have to route your calls through a 3rd party service to do so.

Maybe you are looking for