How to record audio using wireless phone headset on a mac (Adobe CS6)?

I have purchased a Plantronics Savvi w440 headset, with which I want to record audio. I was assured by the company that I could.
Well, Audition won't record me talking; it only "picks up" about 1 sec, then stops recording.
I have used a variety of mics before; I know how to set them up in Audio Hardware. My Default input & output are this new headset. Still, no recording.
I have Audition CS6 on a macbook pro.
I need help. Thanks.

Thanks Bob for your help. I had already downloaded and installed the software for this headset on my Mac. Still won't work. There are no updates for this headset. At least, I haven't found one.

Similar Messages

  • High pitch noise when recording audio using internal mic

    The issue I am having is with the internal mic. When recording audio using quicktime or garageband.It is a high pitch noise that stays whether i am speaking or not. The fix i found was to lower the input volume of the mic in system preferences. However, this causes my voice to be recorded so low that audio is barely usable unless volume is all the way up. Looking around the web I found this gem:
    http://www.usingmac.com/2009/6/18/recording-speech-with-garageband-2009
    This help me get rid of the high pitch noise for Garageband. The noise still there for Quicktime. Any ideas on how I can keep the same mic input volume with out having to listen to the high pitch noise?
    Any help is appreciated.

    Did you do the usual stuff, such as reset PRAM?
    http://support.apple.com/kb/HT1379
    There are some sound settings in PRAM, although I think it's only for sound output.
    Also, as a test, I would create a new admin user account in System Preferences Accounts pane
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
    Log out and log in to the new account (do not use Fast User Switching). In the new account, try recording something using QuickTime, and note if this problem recurs. If it does not, you have eliminated a few possible causes, such as a problem with the overall system installation or a hardware issue, and isolated the problem to something in your normal user account.

  • How can record audio locally in air ?

    How can record audio locally in air ?
    who can tell me~? thanks~!

    Use 3 persons to help you start the Memo app.

  • How To Record Sound Using Applet

    How To Record Sound Using JApplet

    Hallo there,
    I am intrested on the same topic but I am not so good to modify the sound sdk demo. Is there anyone willing to share some code?
    Thanks
    Matteo

  • Running CS6 on a Macbook. Can anyone help me figure out how to record audio that is streaming on the Macbook? Under "Audio Hardware," my input choices are "Built in Mic" and "Built in Input." Neither does this.

    Running CS6 on a Macbook. Can anyone help me figure out how to record audio that is streaming on the Macbook? Under "Audio Hardware," my input choices are "Built in Mic" and "Built in Input." Neither does this.

    Please repost on the CS6 part of the Audition Forums.

  • I bought  an iphone 5 second hand and was told all i had to do was sync it with itunes i did all that but previous owner hasn't removed the device from their account, i am unable to contact them..can anyone tell how i can start using my phone pls

    i bought  an iphone 5 second hand and was told all i had to do was sync it with itunes i did all that but previous owner hasn't removed the device from their account, i am unable to contact them..can anyone tell how i can start using my phone pls

    Fanta Pants wrote:
    i bought  an iphone 5 second hand
    The Apple ID and Password that was Originally used to Activate the iDevice is required.
    If you cannot get this information from the seller
    Removing a device from a previous owner’s account
    You need to return the Device for a refund, as you will not be able to re-activate it.

  • HT4906 So how do i sync my i phone 5 with my mac book pro for photos

    So how do i sync my i phone 5 with my mac book pro for photos

    Getting photos off the phone? Use iPhoto or Image Capture (in your Applications Folder)
    Getting Photos on to the Phone? Use iTunes.

  • How much data is used uploading photos from element 12 to adobe revel

    how much data is used uploading photos from element 12 to adobe revel

    Rixonruss,
    The size of your photos and videos you mark in Elements for upload depicts how much data is being uploaded. However for download, only small size previews get downloaded first unless you download the originals from Elements whenever needed in any Elements workflows.
    If you have any Revel related queries, they may be answered at the FAQ link http://www.adobe.com/in/products/revel/faq.html
    ~V

  • Recording audio portion with two headsets

    I would like to use two people/two headsets to record the
    audio portion of my captivate software demo. We are using two
    digital headset microphones, each with a USB connection
    (Plantronics Gamecom | Pro 1) within a VMware session. The visual
    portion records just fine, but only one headset picks up the audio
    portion. The second headset doesn't pick up anything.
    Ideas on how to get BOTH headsets working while recording?
    (We just spent money on the headsets and would prefer not having to
    spend more money on a single, but shared, microphone that sits on a
    desk; plus we're under a tight schedule :-)

    Sorry I don't have an answer for you - directly, anyway. I do
    understand why you might want to do the dual-mic thing, but I don't
    believe Captivate can handle the double-source audio.
    I would recommend (unless someone here has a better answer)
    that you use your dual microphones and take your script outside
    Captivate to do the recording, then use the Audio Import function
    to bring your saved MP3 or WAV audio into the project that way.
    Best of luck, and welcome to the User Community!
    .

  • How to stream audio in Windows Phone 8.1?

    I have a Windows Phone Silverlight 8.0 app I want to update to 8.1 using WinRT. It streams audio in the background.  In Silverlight, I used
    BackgroundAudioPlayer to set the Track to a Uri.  It's not clear how to do this with
    MediaPlayer in WinRT.  I don't think I can just use a Uri.  Instead, I wonder if I have to use
    MediaPlayer.SetStreamSource(IRandomAccessStream
    stream).  If so, I don't know how to get an IRandomAccessStream from a
    Uri.  I want to stream from a Uri on the internet over HTTP, not from a local file. Any help?

    Refer following links to stream audio in background in Windows Phone 8.1 Runtime app.
    https://code.msdn.microsoft.com/windowsapps/Background-Audio-in-WinRT-344bcf4d
    http://blogs.msdn.com/b/johnkenn/archive/2013/12/31/supporting-background-audio-in-your-windows-8-1-app.aspx
    Thank you for thinking about my problem. I may be mistaken, but I think the above links refer to Windows 8 apps, not Windows
    Phone 8.1 apps. I'm under the impression that background audio is done differently in Windows Phone 8.1 from Windows 8. The
    Background Audio Overview for Windows Phone Store apps explains more. 
    It's a good overview, but does not explain how to play audio from a stream rather than a file.  That's what I'm stuck on.

  • Is it possible to get Apple Keynote to show the presenter display instead of just the slides when I record audio using Play - Record Slideshow?

    Rather than giving a presentation with an external monitor, I want to sit at my desk and record a presentation for distribution like a podcast.  When I click record to add the sound to the presentation I see the slide show on the screen while recording instead of the presenter display.  I would like to watch the presenter display while recording so that I can see the next slide as I record.  There doesn't seem to be any way to record and watch the presenter display without having an external monitor attached.  Does anyone know how to get the presenter display to show while recording without an external monitor?

    I also needed to view presenter notes while recording a presentation on my Macbook Pro and could not find a solutions, but I did find a pretty good work around.
    I downloaded the Keynote Remote app for my iPhone.  I am now able to start recording on my laptop and then hit start slideshow on my iphone to view a portrait mode version of my slides with presenter notes below.  I use my phone to flip through slides and slide builds while I'm reading through my presenter notes.  When I've reached the end of the presentation I hit esc on my Macbook Pro and I'm done.  I'm then able to export the recorded presentation as a Quicktime video and post it on our website, which is exactly what I set out to do.
    It takes a little bit of coordination to get used to this method, but I don't need to have a projector or second monitor because my phone takes on the second monitor role.

  • Log-In Using Wireless Phone Number

    I "normally" log in to my accounts through My Verizon. This USED to give me access to BOTH my wireless and my residential (FiOS) accounts. Now, when I log in through My Verizon, I can access my wireless account, but when I try to access my residential (FiOS) account, it asks for my log-in again. When I input my wireless phone number, I get a message that the Account Name is not on record ... or something like that. I called Verizon to find out why. After getting transferred back and forth, I was routed to a menu system and eventually hung up on. I tried again and spoke to a representative at Verizon Residential and was told, "We've made a lot of changes. Just use your Account Name to log on."  This is not really an answer. Has somehthing changed without notification from Verizon? This response sounds like someone who really didn't want to take the time to get to the bottom of the issue to me. Any help out there from anyone??

    I know it some cases (myself included) the did disconnect wireless bill and FIOS bill.Used to be called One Bill, but that appears to have been discontinued.

  • I just recorded audio using QuickTime, but now I can't use it in iMovie.

    I used QuickTime 10.0 to record audio, but now I have no way of using this audio in iMovie. I added it to my iTunes library, but I can't drag it into my project to use as a regular audio file. I can't even convert it to some audio format since QuickTime 10 doesn't have that feature.
    Help! I was hoping to create a screen recording demo via QuickTime and overlay it with audio using speech I recorded using QuickTime as well, but now I see I can't. Is there any way to use audio recorded with QuickTime other than just listening to it?!? Seems like a feature that isn't done yet.

    The thing is that there is no unlocked phone in the US that is available for purchase.  The T-Mobile phone is contract/sim free and not unlocked and for the unlocked phone you have to wait for at least a couple of months after release before the unlocked phone is available. 
    That is why you cannot use the phone in the UK because it was never unlocked in the first place if you activated it with T-Mobile.  Sim/Contract free and unlocked do not mean the same thing.  You will have to wait at least 2 months now before T-Mobile will consider unlocking your phone and then you won't be able to get 4G in the UK and you have no UK warranty, only US where you purchased the phone.
    Why not buy a new phone in the UK that is unlocked and sell the US one?

  • How do you mute using the nokia headset for N97

    When using the nokia provided headset with the N97, how can you mute the call. I see there is a slider button on the side of the control unit, but I have tried using this to no avail. to mute i have continued ot use the phone controls, which almost negates the point of using a headset in the first place.
    thanks
    Solved!
    Go to Solution.

    I do not know how to mute it using the headset, but AFAIK the slider button on the headset was to keypad lock the headset control piece.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • How can we block a wireless phone number?

    We use fios tv/internet/phone package and recently almost every day we got 2 or 3 times phone calls from the same wireless phone number we do not know.  When we pick up the phone to answer, the caller makes no sounds and we have to hang up.  It is very annoying.  Is there a way that we can block this person phone number so that he/she can not bother us anymore?

    THere is a service you can subscribe to, not sure what the name is right now, but if you call the billing office and tell them you are getting harrasing calls, they can put a block on it.
    Some of the services like FiOS digital voice, the Hub or I think the old IOBI let you block up to 5 or so numbers so it shouldn't be a big deal.

Maybe you are looking for

  • Photoshop 2.0 versus Photophop 10

    Year ago I purchased Adobe Photoshop and Album  2 for Windows XP computer.  Loved working with it, howver, I can no longer update program and after editing photos, cannot save them due to "program error". So this year, I purchased Windows 8 computer

  • Procedure successful when using dbms_job, but fails in a shell script

    I have a procedure which is throwing the following error when run from a shell script. This procedure completes successfully when run using dbms_job ORA-00164 distributed autonomous transaction disallowed within migratable distributed transaction

  • Where can I learn/how to use basic plug ins

    Hi, Plug ins - Which are the basic ones I should be aware of (there are many EQ's for instance)... I am a musician, but haven't spent any time really learning how to properly use the plug ins that come in Logic 8... Any websites, DVD's etc... where I

  • 10.7.2 finder stops copying

    I have a 3Tb external USB connected Seagate drive  MacFS, Journaled.  When copying across the network to my Lacie NAS, the drive stops copying after an hour or so when connected to my MacBook Pro running 10.7.2.  No issues connecting to my firewire d

  • AND Group MA (manager/assistant)

    Hi I have a problem with and group ma configuration i have implemented group ma with andtek version 4-8-2 but when i called my manager phone i heared fast busy i have group in andtek and manager configuration with 602[0] directory this directory same