How to record sound using video setting of camera?

using camera as a video recoder works fine but no sound. is sound recording with video possible? Ipad 2

Hallo there,
I am intrested on the same topic but I am not so good to modify the sound sdk demo. Is there anyone willing to share some code?
Thanks
Matteo

Similar Messages

  • How To Record Sound Using Applet

    How To Record Sound Using JApplet

    Hallo there,
    I am intrested on the same topic but I am not so good to modify the sound sdk demo. Is there anyone willing to share some code?
    Thanks
    Matteo

  • Can't record sound using the jack in/out on macbook pro 13 os x

    hi
    i bought a new macbook pro 13' intel core i5 4gb with the latest os x version 10.8.2. mainly for sound and video editing
    yesterday i tried to record sound using garage band and through the mini jack port. once i connected an mp3 player to the mini jack port, the sound prefrences window recognized it as headphones and not as input jack as it did on my friend's same mac with leopard os on it.
    it seems like no matter what i try to do (changing instument set up on garage band, restarting the computer with the jack in or out etc...) nothing worked
    i bought this mac just so i wouldn't have to deal with these kind of problems....suppose to be a very user friendly os and hardwear.
    very dissapointing. please if any one has a clue what can be done?

    i'm aware of my other audio interface options, but i would expact this machine to have the basic options every 20 year old pc has, a simple plug and play difault to get audio into my computer. i bought it at b and h in NY and in their specs it says that it's a 'combo kack' - meaning both in and out analog audio ports. after cheaking mac's site it says only headphones.
    also tryied to connect a digidesign mini mbox2, through the usb port, and i had to unplug it, shut down the mbp, restart it again etc.. and it also doesn't always work propely and makes all kinds of digital error sounds.
    although in this case i can't that the mbox is not damaged.
    over all it's very dissapointing. it's my first mac and i figured it would be a much more idiot proof, user freindly work tool.
    if you got any other tips i'd appreciate that
    thanx alot for the focusrite link

  • How to record from the video in or S-video Ports on Qosmio G40?

    Can anyone tell me how to record from the video in or S-video ports, because i've tried the Ulead DVD factory program and the only capture device it could see was the webcam, and it did capture from it
    After that i've downloaded the update file that was provided by the support website
    The devices that the program could see are the TV tuner and the webcam (which it couldn't access anymore for some reason)
    After that i've downloaded a newer update which simply is the same as the last update and seems that someone in the support website directed the link of the new update which they don't have to the file of the previous update which doesn't really do anything.

    Hi
    There are 2 s-video ports; s-video out port is not designed to capture the signals from any external source. The name of this port says everything; its an OUT port!
    The s-video-in port must be placed at the right side of the notebook. Dont mix the both ports. But note; this port receives only the video signals. To hear the sounds, use a video cable to connect the sound terminals of the audio device and your computer.
    Red: sound right channel
    White: sound left channel
    The Ulead DVD Movie factory can be used to capture this signal.

  • My iphone 4 microphone won't record sound on video clips and doesn't work with Skype

    This is the first time I have used the forum. My iphone4 microphone won't record sound on video clips, and won't work with Skype.

    I have checked that I have the latest software. I have restarted phone. I am not sure how to perform the other things you mentioned , restore and reset as new... Would I lose any data by doing these? Thanks for the reply.

  • How are you currently using video with marketing automation?

    I manage an educational site through Brightcove called Video Marketing Academy. I would like to create a course to tackle the challenges of using video with a marketing automation platform. I’d love to know how you are currently using video with marketing automation, what your results have been, and what are some of the challenges that you are running into?
    I understand some of this maybe platform specific, but I would like to understand the challenges and help from a strategy and best practice perspective.
    videomarketingacademy.brightcove.com

    Well you certainly hit some good ones. When it comes to marketing automation I'm always game for more flexibility with anything, for instance I would love to have more conditional options on form processing conditions, and I know that has nothing to do with video but it goes to your answer, anyway that you can give a marketer more flexibility with filters or conditions or what not the better when it comes to lead scoring, campaign options, and reporting the better.
    If one could integrate Video reporting into Eloqua I think that would be cool, I know that would be very challenging because of how Eloqua reporting works, but it would make it a one stop shop which isn't bad, 

  • How do I change my light setting of camera during chat?

    People comments me while chatting that my background light is dark while chatting using Mac Pro, how do I change my light setting of camera during chat or facetime??/

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • How to combine sound with video to an AVI Using IMAQ?

    I need to combine sound with video I capture and write it out as an AVI. Is there anyway in Labview to combine sound with and AVI? Or an easy to use third party product?

    Hello,
    The AVI tools that are provided with Vision allow for data to be added to your video.  Sound information can be stored this way, but if you are looking for a way to add audio support to your video (such that it will play the sound file when the video is played in Windows Media Player or other applications) you may want to look into finding a shareware or freeware product that can accomplish this.  LabVIEW does not have tools specifically targetted to this operation.
    Good luck,
    Robert

  • Recording Sound with video

    I was previously able to record sound at the same time that I captured video, now I can't. I use the on board camera to capture video and an external mic. I need to know how to capture video and sound simultaneously.

    Go to your Sound in the System Preferences and see if it is set up properly and you can test the microphone there. Then open up iChat prefernces, Audio/Video and see how that is set up and see if your audio works as you speak there. there have been some problems with that, and i think you fix it by resetting the PRAM or NVRAM
    http://support.apple.com/kb/ht1379
    worth a try
    roger

  • Photo booth will not record sound with video

    I have always been able to record sound when using photo booth. Now i cant seem to do it.

    Have you got your Input Sound in System Prefs set to Internal microphone or Line in?

  • Can you record sound using a USB 6211 and convert the data to a .wav (or other sound) file?

    Hello,
    I am trying to build a system that will use a USB 6211 to record sounds from multiple electret microphones and then save the data as a .wav file or other sound file.  I have already built my mics and hooked the mics up to the USB 6211; the DAQ device seems to do an adequate job recording the signal - I've recorded from 3 mics at a time at 11,025 Hz, although I don't know how good the signals are since I can't save them for playback after the fact, and they aren't going through my sound card. Ultimately, I would like to save the data as a multichannel audio file which I could then open in a program such as Audacity for further editing and analysis. Since Audacity can import a variety of sound files, my file format doesn't need to be .wav if another format would work better.
    Any advice would be appreciated.
    Thanks, Eric

    If you are sampling all three simultaneously, your highest frequency recordable will be (11,025/2)/3, so about 1800Hz and that will pretty coarse (traditionally digital sound recording is at 44Ks/s at the low end). As to converting to a .wav, there are functions on the "Graphics and Sound" palette for saving waveforms to a .wav file.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • Why can't i record sound on video?

    I was recording a video and when I went to listen to it there was no sound. Doesd anyone know why I can't record sound?  Voice memo works though.

    Hello, Bonnieandeddie. 
    Thank you for the question.  I'm assuming you are not receiving any sound from third-party applications when playing video/audio content.  If this is the case, the first thing I would check is if the side switch is set to silent as this can cause applications to be mute.  Below I have included an article that covers adjusting the  settings for the side switch.  Also, make sure to close all applications in Multitasking and power cycle the device.  Test the sound issue after processing these steps.
    iPad: Understanding the side switch
    http://support.apple.com/kb/ht4085
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Cheers,
    Jason H.

  • How stop ambient sound when video sound starts?

    I play ambient background music in my movie. I've written
    Actionscript to attach an mp3 and control the overall sound volume.
    The code to control the overall sound is:
    _global.allSounds = new Sound ();
    _global.allSounds.setVolume(50); for example
    However, in my movie there are also video clips (w/sound)
    that I have embedded using the FLVPlayback component and one of the
    designer skins. The problem? I don't know how to stop the ambient
    music when the user clicks the "Play" button on the skin. Both the
    ambient sound and video sound play at the same time creating a
    cacophony. And if the user happens to click the "mute" button on
    the skin, my _global.allSounds.setVolume() commands have no effect.
    How do I integrate the way sound is controlled by
    Actionscript vs. the way it is controlled by video components?
    Thanks.

    The obvious answer would be: remove the Beep VI that's probably in there. Please show us your code.

  • How to record sound with Java Sound?

    I just want to record a clip of sound and save it to a WAV file. I exhausted the web but didn't find a tutorial. Would someone be kind enough to give me a tutorial or a sample code? The simpler the better. Thanks.

    Here's the code I used to record and play sound. Hope the length do not confound you.
    import javax.sound.sampled.*;
    import java.io.*;
    // The audio format you want to record/play
    AudioFormat.Encoding encoding = AudioFormat.Encoding.PCM_SIGNED;
    int sampleRate = 44100;
    byte sampleSizeInBits = 16;
    int channels = 2;
    int frameSize = 4;
    int frameRate = 44100;
    boolean bigEndian = false;
    int bytesPerSecond = frameSize * frameRate;
    AudioFormat format = new AudioFormat(encoding, sampleRate, sampleSizeInBits, channels, frameSize, frameRate, bigEndian);
    //TO RECORD:
    //Get the line for recording
    try {
      targetLine = AudioSystem.getTargetDataLine(format);
    catch (LineUnavailableException e) {
      showMessage("Unable to get a recording line");
    // The formula might be a bit hard :)
    float timeQuantum = 0.1F;
    int bufferQuantum = frameSize * (int)(frameRate * timeQuantum);
    float maxTime = 10F;
    int maxQuantums = (int)(maxTime / timeQuantum);
    int bufferCapacity = bufferQuantum * maxQuantums;
    byte[] buffer = new byte[bufferCapacity]; // the array to hold the recorded sound
    int bufferLength = 0;
    //The following has to repeated every time you record a new piece of sound
    targetLine.open(format);
    targetLine.start();
    AudioInputStream in = new AudioInputStream(targetLine);
    bufferLength = 0;
    for (int i = 0; i < maxQuantums; i++) { //record up to bufferQuantum * maxQuantums bytes
      int len = in.read(buffer, bufferQuantum * i, bufferQuantum);
      if (len < bufferQuantum) break; // the recording may be interrupted
      bufferLength += len;
    targetLine.stop();
    targetLine.close();
    //Save the recorded sound into a file
    AudioInputStream stream = AudioSystem.getAudioInputStream(new ByteArrayInputStream(buffer, 0, bufferLength));
    AudioFileFormat.Type fileType = AudioFileFormat.Type.WAVE;
    File file = new File(...); // your file name
    AudioSystem.write(stream, fileType, file);
    //TO PLAY:
    //Get the line for playing
    try {
      sourceLine = AudioSystem.getSourceDataLine(format);
    catch (LineUnavailableException e) {
      showMessage("Unable to get a playback line");
    //The following has to repeated every time you play a new piece of sound
    sourceLine.open(format);
    sourceLine.start();
    int quantums = bufferLength / bufferQuantum;
    for (int i = 0; i < quantums; i++) {
      sourceLine.write(buffer, bufferQuantum * i, bufferQuantum);
    sourceLine.drain(); //Drain the line to make sure all the sound you feed it is played
    sourceLine.stop();
    sourceLine.close();
    //Or, if you want to play a file:
    File audioFile = new File(...);//
    AudioInputStream in = AudioSystem.getAudioInputStream(audioFile);
    sourceDataLine.open(format);
    sourceDataLine.start();
    while(true) {
      if(in.read(buffer,0,bufferQuantum) == -1) break; // read a bit of sound from the file
      sourceDataLine.write(buffer,0,buffer.length); // and play it
    sourceDataLine.drain();
    sourceDataLine.stop();
    sourceDataLine.close();You may also do this to record sound directly into a file:
    targetLine.open(format);
    targetLine.start();
    AudioInputStream in = new AudioInputStream(targetLine);
    AudioFileFormat.Type fileType = AudioFileFormat.Type.WAVE;
    File file = new File(...); // your file name
    new Thread() {public void run() {AudioSystem.write(stream, fileType, file);}}.start(); //Run this in a separate thread
    //When you want to stop recording, run the following: (usually triggered by a button or sth)
    targetLine.stop();
    targetLine.close();Edited by: Maigo on Jun 26, 2008 7:44 AM

  • How to save and use videos Offline

    Hi
    I have been searching for this since yesterday but no luck. Can anyone please mention how can I save a video that I am watching on my Air app to my  harddisc so that I can use it offline?
    Thanks in advance
    A

    DA reporting sucks badly.
    Recently some user have deleted imp files on a unix server.
    If you see who all logged in Unix, it shows DA server name for all users logged via DA.
    user logged in via normal VPN, clearly shows the machine name for user but not in DA.
    There is no option to select time and see who all was logged in during that time in DA?
    under "access details" it only shows the name of DC but not the actual server name that user would have accessed. (what is the use of this option then - useless)
    search box dont work, I tried putting every IP but yields no results.

Maybe you are looking for