How to record stereo output in Logic Pro X

I am trying to record the stereo output in Logic Pro X on the spare stereo track. In other words what I would like to do is to record audio/software instruments tracks existing in my project as well as my real time performance on top of that (let's say a software synth played using a midi controller) to a new stereo track, just like if I were recording Logic's stereo out to an external recorder except in this case you are recording that to a spare tracks within Logic X.
Any help will be highly appreciated.

Send everything to Bus X - Bus X to StereoMstr (for monitoring)
Create new Track/Channel
- for Input choose Bus X
- for Output choose No Output
Engage Record on the newly created track and off you go.
Have a nice day!

Similar Messages

  • Can I control the system output via Logic Pro?

    I know how to record system output in Logic Pro (CH 13&14), but in order to do that, the tracks in Logic Pro must be muted to avoid feedback.
    What I'm wondering is if I can control overall system output via a track/tracks in Logic Pro. I've got a Plextor PVR set up so that I can watch tv on my Mac, but when I connect my digital cable box to it the volume is down at around a faint -24 dB. I'd like to be able to boost the gain with Logic.
    Thanks in advance for any help!

    Never mind. I found a cool app called Audio Hijack Pro that works perfectly for this.

  • How to set up headphone mix logic pro x

    Trying to figure out how to set up headphone mix in Logic Pro X but cannot get stereo sends.

    Maybe this will help, in Logic Pro 9 there was a box under preferences/audio called universal track mode. If you unchecked this box then when settng a send or creating a aux track you had the ability to select mono or stereo busses. Logic Pro X doesn't seem to have this. So when creating a aux channel with output stereo 5-6 I can't select stereo thus I can't create sens to the left or right side of this aux channel for headphone mixes. In Logic Pro 9 I can create a stereo aux channel with bus 1-2 output 5-6 (to headphone amp) I can then use sends to send musical instrument to bus 1 (left side) and vocals to bus 2 (right side). I hope this helps I just want to know if this function is still in Logic Pro x or we have to go back to OLD SCHOOL way of doing this.
    Thanks

  • Address physical audio outputs in Logic Pro

    Hi,
    I can address the physical outputs of my audio interface as stereo pairs in Logic Pro. How do I create mono physical outputs. My audio interface is a Digi 003 rack.
    Peter

    Hi Peter
    I have a Digi 003R with Logic Pro 9.02 and tried the steps above to get mono outs and it worked so I don't think it's a driver issue. I tried to do the same on Logic Pro 8.x with a Motu I/O and it would not do it with either the Motu selected or internal audio so maybe this is a LP8 issue. What's your setup?
    Regards
    Bobbi
    Within LP9
    Message was edited by: Bobbi Style
    Message was edited by: Bobbi Style
    Message was edited by: Bobbi Style
    Message was edited by: Bobbi Style

  • Can you record your voice in logic pro 9 just as simple as garageband or do you need a plug-in?

    can you record your voice in logic pro 9 just as simple as garageband or do you need a plug-in or interface?

    Alas, poor Logic, I knew him well.
    Recording wise, It will be much the same as Garageband but you will need to read manuals as Logic doesn't set things up for you. You must choose input and output devices, create the correct tracks. Logic was designed for professional use so it expects users to be somewhat familiar with recording/editing techniques, in other words, won't hold your hand or be nearly as easy to use.

  • How many iMacs can i register Logic Pro on?

    How many iMacs can i register Logic Pro on?
    We use Logic Pro at our work.  We are using using 6 macs at the moment, i would like to have logic on all 6

    Hi
    Technically this is NOT the 'legal' case:
    https://discussions.apple.com/message/18228781#18228781
    CCTM wrote:
    Hi
    According to the details in this:
    http://www.apple.com/legal/itunes/uk/terms.html#SALE
    You could well be out of luck....
    MAC APP STORE PRODUCT USAGE RULES
    Except as otherwise set forth herein,
    If you are an individual acting in your personal capacity, you may download and use an application from the Mac App Store (“Mac App Store Product”) for personal, non-commercial use on any Apple-branded products running Mac OS X (“Mac Computer”) that you own or control.
    (ii) If you are a commercial enterprise or educational institution, you may download a Mac App Store Product for use by either (a) a single individual on each of the Mac Computer(s) used by that individual that you own or control, or (b) multiple individuals on a single shared Mac Computer that you own or control. For example, a single employee may use a Mac App Store Product on both the employee’s desktop Mac Computer and laptop Mac Computer, or multiple students may serially use the Mac App Store Product on a single Mac Computer located at a resource centre or library. For the sake of clarity, each Mac Computer used serially by multiple users requires a separate licence.
    (iii) Use of Mac App Store Products may require sign-in with the Apple ID used to download the Mac App Store Product from the Mac App Store. Mac App Store Products can be updated through the Mac App Store only."
    HTH???
    CCT

  • How to use pianoteq sounds in logic pro?

    How to use pianoteq sounds in logic pro? I've got an iMac 3.6 Ghz., intel core i5, OS 10.8.5. I want to be able to use my Bluthner piano sound (which is an add-on in pianoteq) in Logic Pro X (10.0.4).
    Thanks,
    Peter.

    Hi
    Try this in a new empty project:
    In the New Tracks box select a software instrument track, and un-check the Open Library box
    You will see a track plus the channel in the Mixer
    Click on the Input  "Inst" button, and you will see a menu like this
    Correctly installed 3rd party 64bit AU plugins will be in the AU Instruments sub-menu.
    CCT

  • How to use Setup Assistant in Logic Pro 8?

    How to use Setup Assistant in Logic Pro 8? I can't find it! even in the User Manuel!
    Also, where can we setup the monitor number like we used to set '2 monitor ' in Logic Pro 7's setup assistant
    Thanks!

    I've been using Logic on two monitors for years. Screensets extend over all the monitors your computer sees, you can position windows on one, or the other, or size them to fit over both, so you can happily have for instance an arrange window on one monitor, and a mixer window on the other monitor, or stretch a giant arrange window over both...

  • How do I update/upgrade from Logic Pro 8 to 9?

    How do I update/upgrade from Logic Pro 8 to 9?

    There is no update, you have to purchase Logic 9 from the App Store, it's $199, which is close to the price of an update.
    Warning, if you do purchase Logic 9 from the App store it will download 2GB of additional patches/sounds/loops...etc. This is for first time buyers so their App Store Logic will have some basics to work with before trying to download the additional 20+GB of loop/instrument data. If you have a full installtion of Logic 8 it's possible the 2GB of data Logic initially downloads will mess with the instruments and sounds you've been using, past projects may not load properly. Just something to be aware of.

  • I purchased a powermac pro and it came with logic Pro 9 (but with out the additional suite of programs that comes with). How can I reregister or reinstall Logic Pro 9 to get those features?

    I could really use some insight into this please also how many gigs of RAM should my power mac have it only has two right now and logic tends to glitch up majorly.

    My original question :
    I purchased a powermac pro and it came with logic Pro 9 (but with out the additional suite of programs that comes with). How can I reregister or reinstall Logic Pro 9 to get those features?

  • How do I delete locators in Logic Pro 8?

    Hi there,
    How do I delete locators in Logic Pro 8?
    It seems I created them mistakenly, now I cannot delete them.  I don't want to use them and
    I don't need to cycle anything.  I'm trying to set markers accurately to timecode on a video,
    but it seems the locators are preventing me from doing so?!!  I'm trying to match accurately
    to the timecode frame and when I reach the unwanted locator it prevents me from moving
    up a frame to the frame I want.
    Thanks
    Simon

    You can easily move locaters by dragging them. You disable them by turning off cycle mode in the transport bar. They are always there but when disabled should not be a problem.

  • No Sound Output from Logic Pro 9

    I recorded a 4-track performance in Logic Pro 9, but when I play it back the displays show that the sound is there but no sound comes out of my computer.  Other files that I have recorded in Logic Pro 9 play fine.  Any Suggestions?
    My Preferences Core Audio is set to Built-in Output, with an I/O Buffer Size of 256, 24-Bit Recording, Unversal Track Mode and Software Monitoring.  Audio Settings specify Automatic Management of Channel Strip Objects, Automatic Naming of Channel Strip Objects and Playback Pre-roll, with a sample rate of 44.100 kHz.  My Apple Sounds System Preferences are set for Built-In/Internal Speakers, the output volume is all the way up, and the mute is off.  I cannot figure out what is keeping the sound from coming out.  Again, any ideas would be appreciated...

    Here are some things to try.
    You said you have core audio set to built in outout , yet you have an Apogee ensemble. Can you hear audio coming from the computer output?
    Can you play other audio files from this session?
    In the lower right hand corner of Logic in the arrange window there is a volume control, did you turn that down without realizing it?
    Can you hear audio from another Logic Session?
    Can you hear Audio From Itunes?

  • How to record V-Drums in Logic Express?

    I’m trying to record my V-Drums through the M-Audio 2626 interface into Logic Express. I’m able to trigger sounds in the Logic Express library when I conned the MIDI-out on the V-drums to the M-Audio.
    But I’d like to record the Roland drum sounds through Logic. Has anyone had success with this?
    I tried connecting the audio out from the V-drums into channel 1 on the M-Audio with a 1/4-inch instrument cable. I can hear the drum kit through the M-Audio via the headphone jack, but not through Logic Express.
    If anyone has successfully recorded Roland V-drums in Logic, any information would be helpful.
    Many thanks,
    

John
    iMac 2.8 GHz Intel Core i5
    RAM: 4GB 1333 MHz DDR3
    Mac OS X 10.6.6
    M-Audio ProFire 2626
    Software Version 0x100C1
    Roland TD-4 V-Drums
    Logic Express 9.1.3

    Hi,
    you're on the right way. You have to create an audio track in Logic (one for each output of the drums or simply a stereo track for the drum's stereo output - depending on your configuration).
    1. Select the appropriate channel of your M-Audio as the audio track's input
    2. Click the little red "R" to arm this track for recording or press the littel "I" to activate input monitoring for rehearsal.
    3. Start recording and there you are.
    4. Don't forget: Have fun!
    Fox

  • Multiple output ultrabeat logic pro x

    I am currently using Logic Pro X and I was wondering how do you set the multiple output to mono in the ultrabeat.
    In Logic Pro 9 there was a mono option under the channel fader but I can't seem to find the mono option for the Ultrabeat in mutliple output mode in Logic Pro X. Can someone help me out with an answer please.

    I've been running Mavericks for a while now, and Logic both X and 9 run great. I haven't experienced these specific bugs, so can't guarantee that upgrading will help you, but the word on the street is that Logic runs better in Mavericks. Personally, I'd recommend upgrading to Mavericks. Just my $0.02.
    Before upgrading, be sure to backup your drives. Clone your system drive using SuperDuper or Carbon Copy Cloner. If not that, at least run a full Time Machine backup.

  • Record enable button disappeared Logic Pro X

    I have been using Logic Pro X for several months without any problems but now the Record Enable Button has disappeared.
    There is a space where it should be. If I choose "Hide Record Enable" the space disappears, but choosing "Show Record Enable" results in only a blank space where R used to be.
    I have checked my hardware settings and my audio input appears like it should.
    The problem is not appearing on my MacBook so I tried creating a new file and importing it to my desdtop Mac (Mini), but when I did this the Record Enable button promptly disappeared.

    Well, yes.. but thats how you are meant to assign/select an Audio device in every version of Logic... going back several major versions now. You had to have done that in Logic Pro 8 or 9 in the past.. You probably just forgot you had to do so initially.
    Anyhow...
    The problem described in this thread was caused by incompatible drivers and a change made to LPX during an update...
    ...and was not caused by the OP failing to select the Audio interface correctly in audio prefs in the first place...
    Cheers..
    Nigel

Maybe you are looking for

  • How do i use an external hard drive for all my itunes music?

    how do i use an external hard drive for all my itunes music?

  • Samsung SSD causing problem with upgrade from Windows 8.0 to 8.1

    I'm having trouble upgrading my HP Desktop from the OEM installed Windows 8.0 to 8.1.  I first attempted the upgrade when 8.1 was first rolled out.  It seemed to upgrade okay, but after a reboot I was left with a black screen... no error messages, ju

  • XML cannot fully get all metadata with "getItemRequest"

    Hi All, My client is using GroupWise 7.0.3. We want to get the dropdown list custom field data of document, but the XML file cannot fully record all corresponding custom field data by using "getItemRequest". For example: GroupWise Client - Document 1

  • Safari Hijacking??!!

    Hi, First point, let's get this out of the way: I know there are neither virus nor malware in the wild for macs. Now, to the matter: Today, my Safari, Firefox and Mail app were hijacked several times, and were always redirected to this page: www.regi

  • Using Midi Reverb and chorus in the Mixer Window

    When I have my 16 midi channels of my triton in open logic with midi data inside, and I turn the Reverb or Chorus button in the mixer window, there are no affects taking place. why?? Thanks