How to record windows 7 aero features using captivate 5.5?
environment:
capivate 5.5
on windows 7
recording Demo mode
Capitvate default install and Preference an settings
I want to record windows 7 aero features.
I record the demo
I publish the demo
and check the html file
The result is:
the only thing that displays are the shortcut keys I press to perform the aero features.
none of the aero features record eg
press shortcut keys
CTRL+windows+TAB which is windows aero 3D
flip preview of windows
or
hover over thumbnails
its like captivates not recording 'moving images'
is there a way I can record windows 7 aero features in captivate?
Any ideas?
thank you
dd
Thank you Ron
yes I discovered the Full Motion Video caption just after i posted - Murpheys Law struck
I also found this
http://www.youtube.com/watch?v=85gx2kyy7YA
Many thanks again Ron
dd
Similar Messages
-
Does anyone know how to record directly to a track using Logic's effects?
Hi there, does anyone know how to record directly to a track using Logic's effects? I know that it needs to run through a buss somehow but I am not quite sure how. Need to Di a bass and want to keep the levels down using a compressor (recording strait into a Mbox with Logic 8). Any help will be greatly appreciated. Thanks.
If you route your Bass into a channel in Logic and put plugins/fx on the channel plus you have monitoring on (and monitoring off on your external mixer) - you can record while listening to the effected sound. However what is being recorded is the clean/raw audio - this is a good thing as you can later change your compression/fx settings - printing the effect at this early stage is normally avoided.
Ian -
How to put windows 7 on mac using bootcamp?
i have a 2010 macbook air and an imac, i dont mind which windows 7 is on. i have a 4 gb usb, 4.7 gb disks and a downloaded (its not from microsoft) copy of windows 7.iso. macbook air has about 25gb of space left and imac over 3000gb. i need to know how to put windows 7 on bott camp with either machine.
Use the BootCamp Aaistant, located in your Applications> Utilities folder. It will walk you thru the installation steps. howeve, once you get to the Windows installation step the Windows installer will check with MS if you have a legitimate copy.
-
How to Create Windows Firewall Predefined rules using Powershell
Windows Firewall Predefined rules using Powershell
Following commands are working some time however sometimes it's giving errors. Any help would be appreciated
WORKING ==> Set-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Enabled True
Set-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Enabled True -Direction Inbound
NOT WORKING
PS C:\Windows\system32> Set-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Enabled True -Direction Outbound
Set-NetFirewallRule : One of the port keywords is invalid.
At line:1 char:1
+ Set-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Enabled True -Dire ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (MSFT_NetFirewal...ystemName = ""):root/standardcimv2/MSFT_NetFirewallRule) [Se
t-NetFirewallRule], CimException
+ FullyQualifiedErrorId : HRESULT 0x80070057,Set-NetFirewallRule
PS C:\Windows\system32> Set-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Enabled True -Direction Outbound
Set-NetFirewallRule : One of the port keywords is invalid.
At line:1 char:1
+ Set-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Enabled True -Dire ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (MSFT_NetFirewal...ystemName = ""):root/standardcimv2/MSFT_NetFirewallRule) [Se
t-NetFirewallRule], CimException
+ FullyQualifiedErrorId : HRESULT 0x80070057,Set-NetFirewallRule
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCMThe command:
Get-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Direction Outbound
produces the output:
Name : FPS-NB_Session-In-TCP
DisplayName : File and Printer Sharing (NB-Session-In)
Description : Inbound rule for File and Printer Sharing to allow NetBIOS Session Service connections. [TCP 139]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-NB_Session-Out-TCP
DisplayName : File and Printer Sharing (NB-Session-Out)
Description : Outbound rule for File and Printer Sharing to allow NetBIOS Session Service connections. [TCP 139]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-SMB-In-TCP
DisplayName : File and Printer Sharing (SMB-In)
Description : Inbound rule for File and Printer Sharing to allow Server Message Block transmission and reception via Named Pipes. [TCP 445]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-SMB-Out-TCP
DisplayName : File and Printer Sharing (SMB-Out)
Description : Outbound rule for File and Printer Sharing to allow Server Message Block transmission and reception via Named Pipes. [TCP 445]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-NB_Name-In-UDP
DisplayName : File and Printer Sharing (NB-Name-In)
Description : Inbound rule for File and Printer Sharing to allow NetBIOS Name Resolution. [UDP 137]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-NB_Name-Out-UDP
DisplayName : File and Printer Sharing (NB-Name-Out)
Description : Outbound rule for File and Printer Sharing to allow NetBIOS Name Resolution. [UDP 137]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-NB_Datagram-In-UDP
DisplayName : File and Printer Sharing (NB-Datagram-In)
Description : Inbound rule for File and Printer Sharing to allow NetBIOS Datagram transmission and reception. [UDP 138]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-NB_Datagram-Out-UDP
DisplayName : File and Printer Sharing (NB-Datagram-Out)
Description : Outbound rule for File and Printer Sharing to allow NetBIOS Datagram transmission and reception. [UDP 138]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-ICMP4-ERQ-In
DisplayName : File and Printer Sharing (Echo Request - ICMPv4-In)
Description : Echo Request messages are sent as ping requests to other nodes.
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-ICMP4-ERQ-Out
DisplayName : File and Printer Sharing (Echo Request - ICMPv4-Out)
Description : Echo Request messages are sent as ping requests to other nodes.
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-ICMP6-ERQ-In
DisplayName : File and Printer Sharing (Echo Request - ICMPv6-In)
Description : Echo Request messages are sent as ping requests to other nodes.
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-ICMP6-ERQ-Out
DisplayName : File and Printer Sharing (Echo Request - ICMPv6-Out)
Description : Echo Request messages are sent as ping requests to other nodes.
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-LLMNR-In-UDP
DisplayName : File and Printer Sharing (LLMNR-UDP-In)
Description : Inbound rule for File and Printer Sharing to allow Link Local Multicast Name Resolution. [UDP 5355]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
Name : FPS-LLMNR-Out-UDP
DisplayName : File and Printer Sharing (LLMNR-UDP-Out)
Description : Outbound rule for File and Printer Sharing to allow Link Local Multicast Name Resolution. [UDP 5355]
DisplayGroup : File and Printer Sharing
Group : @FirewallAPI.dll,-28502
Enabled : True
Profile : Any
Platform : {}
Direction : Outbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
The command:
(Get-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Direction Outbound).DisplayName
shows the display names of the 14 outbound rules in the FPS group:
File and Printer Sharing (NB-Session-In)
File and Printer Sharing (NB-Session-Out)
File and Printer Sharing (SMB-In)
File and Printer Sharing (SMB-Out)
File and Printer Sharing (NB-Name-In)
File and Printer Sharing (NB-Name-Out)
File and Printer Sharing (NB-Datagram-In)
File and Printer Sharing (NB-Datagram-Out)
File and Printer Sharing (Echo Request - ICMPv4-In)
File and Printer Sharing (Echo Request - ICMPv4-Out)
File and Printer Sharing (Echo Request - ICMPv6-In)
File and Printer Sharing (Echo Request - ICMPv6-Out)
File and Printer Sharing (LLMNR-UDP-In)
File and Printer Sharing (LLMNR-UDP-Out)
If your output is different than this, it means rules have been removed (or added) to the File and Print Sharing group.
For example, if you run the command:
New-NetFirewallRule -DisplayName "My test rule 2" -group "File and Printer Sharing" -Enabled True -Protocol tcp -LocalPort 12346 -Direction Inbound
This adds a new inbound firewall rule to the FPS group. Output looks like:
Name : {06449724-944b-4048-834f-8870b9dce4f6}
DisplayName : My test rule 2
Description :
DisplayGroup : File and Printer Sharing
Group : File and Printer Sharing
Enabled : True
Profile : Any
Platform : {}
Direction : Inbound
Action : Allow
EdgeTraversalPolicy : Block
LooseSourceMapping : False
LocalOnlyMapping : False
Owner :
PrimaryStatus : OK
Status : The rule was parsed successfully from the store. (65536)
EnforcementStatus : NotApplicable
PolicyStoreSource : PersistentStore
PolicyStoreSourceType : Local
This test rule is of course useless because there's no listener on TCP port 12346 on this particular machine..
The new rule can also be viewed in Windows Firewall with Advanced Security:
Now if you run the command:
(Get-NetFirewallRule -DisplayGroup "File and Printer Sharing" -Direction Inbound).DisplayName
the output will look like:
File and Printer Sharing (Spooler Service - RPC)
File and Printer Sharing (Spooler Service - RPC-EPMAP)
My test rule 2
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) -
How to Run Windows Xbox music player using autoit
Hi,
I am doing some automation on windows.I wanted to play AV file in windows 8/8.1 default xbox player through automation.
I did not find the xbox player exe or so. I am using autoit for automation. Is it possible to run video on xbox player using autoit?
or any other simple way how i can run av in xbox player using automationHi,
Hi,
As the issue is specific with Xbox player , you may contact Microsoft Xbox Player Forum for further assistance on the issue:
Contact - Xbox Player Forum: http://www.xbox.com/en-US/forums
Please revert for any clarification on this or any Windows issue. We will be glad to help you.
Roger Lu
TechNet Community Support -
How to get list of HTML5 features used by a Edge Project
Hi All,
Is there a way for me to know what all features of HTML5 does my Edge project actually use.
I know there are a lot of sites which tests what all HTML5 features are supported by a browser, but I want to know which all features are being used by a edge project.
Thannks in advance.GenericPerson1958 wrote:
I created a edge project, it has a couple of animated rectangles and some text, I publish this project.
I suspect that this project does not use any HTML5 features and should be able to work in down level browsers just fine.
Is there a easy way to test/verify this?
As far as I am aware the only html5 element ever 'natively' used (anyone correct me if I overstate) is that the outputted result (.html file) is html5 encoded doctype declaration.
<!DOCTYPE html>
<html lang="en">
....... and so on
Having that inplace, armed with a modern browser (modern is the operative word) then the project is html5 enabled. You can can employ any html5 property (examples here http://www.w3schools.com/html/html5_intro.asp) into your Edge project.
Your statement above is half & half: though you may never utilize a html5 element (like, canvas, video or audio) the doctype of the resulting file is still html5
<!DOCTYPE html>
So you may still need to employ a fallback for older browsers. I think other factors are also involved, though, aside from just html5. It's the combination of html5, jquery and CSS3.
hth
Darrell -
How to adjust windows in Skype while using 8.1 Pro...
I want to minimize Skype while working in other apps and receive notificaations when I have messages or calls. I have only full window for skype available???
THANKS
jimInstall the regular Skype for Windows desktop version:
http://download.skype.com/msi/SkypeSetup_6.21.0.104.msi -
How to implement a password/login feature using the package OWA_SEC
HELLO.....
I have another question:
I am using the following versions of Oracle products
Connected to:
Oracle9i Release 9.2.0.5.0 - Production
JServer Release 9.2.0.5.0 - Production
SQL> select owa_util.get_version from dual;
GET_VERSION
9.0.4.0.1
(version of OWA packages)
I have successfully compiled the following package:
(It is based on a package in the text Oracle Web Application Programming for PL/SQL Developers by Susan Boardman etc page 687-688
The SPEC and BODY code is as follows:
CREATE OR REPLACE PACKAGE AUTHEN_TEST IS
FUNCTION AUTHORIZE RETURN BOOLEAN;
PROCEDURE HELLO_WORLD;
END;
CREATE OR REPLACE PACKAGE BODY AUTHEN_TEST IS
FUNCTION AUTHORIZE RETURN BOOLEAN IS
v_user VARCHAR2(10);
v_password VARCHAR2(10);
BEGIN
owa_sec.set_protection_realm('The Realm of Testing');
v_user := UPPER(owa_sec.get_user_id);
v_password := UPPER(owa_sec.get_password);
IF v_user = 'PREN' AND v_password = 'HALL' THEN
RETURN TRUE;
ELSE
RETURN FALSE;
END IF;
END AUTHORIZE;
PROCEDURE HELLO_WORLD IS
v_status BOOLEAN;
BEGIN
htp.p('TESTING');
v_status := authorize;
IF v_status = TRUE THEN
htp.p('WENT TO PASSWORD SECTION');
ELSE
htp.p('DID NOT GO TO PASSWORD SECTION');
END IF;
END HELLO_WORLD;
END AUTHEN_TEST;
As I said the code compiles!!
However what I want it to do is successfully run the following code from the above package:
owa_sec.set_protection_realm('The Realm of Testing');
v_user := UPPER(owa_sec.get_user_id);
v_password := UPPER(owa_sec.get_password);
I want the user to be asked for a password and login
Currently when I use the web based application the browser displays:
TESTING DID NOT GO TO PASSWORD SECTION
Any advice is appreciated
Thank You
DouglasHello,
The URL:
http://www.columbia.edu/~br111/plsqltools/configur.htm#1002513
has useful information related to my question
Also this post from Paul M was helpful:
Finding which OWA packages are available for use in the schema/database
Thanks
Doug -
How to record A Electronic Drum set using Logic?
Hi there, I just bought a Simmons Electronic set. It has a USB jack, In the Manuel it says its plug and play no drivers needed. How do i get my set to work with Logic? Thank you!
Hi all,
Problem solved... I decompiled standard code and I did what SAP do when they want to change a folder layout set:
IResourceContext context = ResourceFactory.getInstance().getServiceContext("cmadmin_service");
com.sapportals.portal.security.usermanagement.IUser puser = context.getUser();
ICollection collection = (ICollection)ResourceFactory.getInstance().getResource(RID.getRID("folder_path"),context);
IRepositoryServiceFactory factory = ResourceFactory.getInstance().getServiceFactory();
ILayoutService layoutService = (ILayoutService)factory.getRepositoryService(collection, "LayoutRepositoryService");
ILayoutContext userContext = layoutService.getContextForUser(puser, "");
ContextProperties commonProperties = new ContextProperties(layoutService, collection, userContext.getAnonymousContext(), layoutService.getProfiles(), new HashMap());
commonProperties.initFromPersistence();
commonProperties.setSelectedProfileID("LayoutSetProfile");
commonProperties.setSelectedLayoutsetID("ID_of_my_layout_set");
ArrayList errormsg = new ArrayList();
commonProperties.save(null, errormsg, false);
Thanks and regards,
jc! -
I am trying to capture hotkeys for a computer class by creating a simulation & an assessment. I am unable to simulate the arrow keys and some hotkeys like F5. It does not work when I try it using IE but seems to work in Firefox. Haven't tried Chrome.
Any tips please? Thanks in advance!Trying to simulate use of Hotkeys, especially function keys, is almost always a futile exercise. Your end user's web browser gets first dibs on any F keys as well as any other keystroke combinations it happens to want to reserve for its own use. No matter what you do, you cannot override this with anything you do in Captivate content.
-
I have logged into citrx and can see the home page with all the applications from my work environment but when I click on them they wont open and safari tells me it can access them as it has no available application to access it any help would be great as my work help desk has referred me to apple
I have logged into citrx and can see the home page with all the applications from my work environment but when I click on them they wont open and safari tells me it can access them as it has no available application to access it any help would be great as my work help desk has referred me to apple
-
Hello-
I am trying to project a film from an ipad mini with a vga cable to a projector. When tested, the film played, but the ipad did not mirror what was being projected, it was a black screen. I am trying to be able to mirror the devices AND figure out how isolate the window so I can use different menus with the film still playing.
Any one know an app or softward that i can use?
Thank you!
ChristieTo move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
and select the Library that you moved. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Your first option didn't work because you imported one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
Your second option didn't work because you simply referenced her library on the old machine.
Regards
TD -
How to record the the time line ?
we would like to tell you roughly about our project using labview. Our program is like measuring running rail vibration using accelerometer, NI-9233 and NI-9103. There are some recording parts . For example, if vibration is greater than 50g, we need to record and save files to show the exact time and the range of the acceleration,etc .Our problem is that how to record and save the files using labview.Thank you very much for your time . We are looking forward for your reply.
Best Regards,
kiTHi kit,
you can use the DAQmx vi´s to measure your data for example as waveform. If you have your data you can write it to a file. There are a lot of examples in the Example finder.
Hope it helps.
Mike
Message Edited by MikeS81 on 05-22-2008 11:36 AM -
Windows 7 Aero Snap Feature - how to disable this?
We have Thinkpads in our environment and I cannot seem to disable the Windows 7 Aero snap feature. I went into control panel, Ease of Access Center and made the change, but this does not seem to disable the aero snap feature. Any ideas?
If you have done THIS
And it doesn't work,
Maybe try HERE for more tips.
At you own risk, of course! -
I have pdf file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method? alternate method? I have Adobe Acrobat X Pro and Windows -7 platform.
Yes, I just want to cover up all the pages for those particular area of document numbers.
Nothing sensitive about it. I just want to show the correct document numbers on all pages in print out.
So, I wanted to cover up by comments, but commenting on each page will be difficult. So, I wanted to comment the same on all pages.
Maybe you are looking for
-
Errors while Executing a scenario thruogh command prompt...Pls help!!
hi, i am trying to execute a scenario in my command prompt.i am using windows operating system. i am getting the the following error when i run this command.. startscen COM_IFLEX_LIMITS 001 GLOBAL "-V=2"OracleDI: Starting scenario COM_IFLEX_LIMITS 00
-
Error in uploading master through LSMW
Hi, We are uploading customer master through LSMW with flat file in 10 th step (Display Read Data) we are getting error that - "Data record too long to be imported (0 or >5000)" we checked length of file also everything is perfect. So How to resolve
-
Access external drive remotely through Airport Extreme
My Airport Extreme (v 7.7.3) is setup at the office with a connected drive and everything works great as long as I am within the same network as the airport. How do I access the drive from home on a different network? Each time I get the error "Conne
-
ITunes 5.01 crashing w/ no error when I access music store
I've had trouble finding my particular iTUnes 5 problem on the discussion boards. iTunes 5 installed fully on my computer. I initially upgraded thru iTunes and it was working until I attempted to access the music store, when it just closed down. No e
-
When creating a new message in mac mail I cannot save it as a draft as I have been able to do in the past. After writting a message an error will pop up a minute or so later and warn me that I cannot save the file as a draft and any attempt to save t