How to record you screen using quicktime with built in input line and microphone in the same recording?

i am using th quick time record your screen option and see (when on the audio selction) that you can only either record sound from your computer or from your microphone
is it possible to have it both on one recording?

The usual audio-in options on a laptop are None / Built-in Input: Line in / Built-in Microphone: Internal microphone. There's not an option to record system audio unless you've installed a third-party extension such as Soundflower.
In any event, if you're looking to combine audio inputs, check the Audio MIDI Setup help files (Applications > Utilities > Audio MIDI Setup). Search for "aggregate."

Similar Messages

Hi, i am from india, im using iphone3gs with ios5.1.1 .i want to update the same to ios6 or to ios7,but i couldnt find the software update option in my iphone,so plz help me how to update my software.

hi, i am from india, im using iphone3gs with ios5.1.1 .i want to update the same to ios6 or to ios7,but i couldnt find the software update option in my iphone,so plz help me how to update my software.

Are you sure it's a 3GS? What is the model number?

How do I import music using homeshare with iTunes 11...I can see the shared libraries but I can't drag and drop and there is no import button. Thanks!

How do I import music using homeshare with iTunes 11...I can see the shared libraries but I can't drag and drop and there is no import button. Thanks!

Yes, that appears how Mavericks works right now. However, you can open the Address Panel, select all your contacts, then click the To (or CC, or Bcc) buttons to move the selection to the address field.
If it is not already in the Toolbar, right-click on the Toolbar and select Customize Toolbar…
Then, drag the address panel up to wherever you want it.
You may also want to add it to the New Message window in the same way.

How do i backup my iphone 3 started on one itunes account and restore to the same phone with a different itunes account without losing all my information?

how do i backup my iphone 3 started on one itunes account and restore to the same phone with a different itunes account without losing all my information?

Please search the forums. This has been covered here extensively.

I purchased 2 ipad mini's at Xmas, I then sync'd them with itunes on my pc, and put basically the same apps on each of them. Both are 16gb units. One of them is full ( with over 9gb of "other" memory) the ipad still has 10gb left.What could be causing thi

I purchased 2 ipad mini's at Xmas, I then sync'd them with itunes on my pc, and put basically the same apps on each of them. Both are 16gb units. One of them is full ( with over 9gb of "other" memory) the ipad still has 10gb left.What could be causing this "other" storage

How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
What is “Other” and What Can I Do About It?
https://discussions.apple.com/docs/DOC-5142
iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
 Cheers, Tom

Replace a 2003 (not R2) File Server with a 2012R2 files server and preferably keep the same machine name and IP when finished

I am wanting to replace a 2003 (not R2) File Server with a 2012R2 file server and preferably keep the same machine name and IP when finished. For the moment I just need some "high level" guidance, little details can be worked out once I know
which direction I will go. I was considering that DFS might be a way to help get through the process although when finished the 2012R2 Files server will be by itself with no other file server planned at this time. DFS can stay installed for maybe
future purposes but clearly I wouldn't need the DFS Replication with only one machine.
Here's a few details of the environment....
1. DC's are 2012R2 but it is still 2003 DFL because the old 2003 DCs are still present. But likely they will be gone and the DFL elevated before I start on the File Server project
2. Nearly all machines in the facility have a shortcut on the "All Users" Desktop that points to the existing old File Server. Editing or replacing that shortcut would be a major pain,...hence why I want to keep the same machine name at least,
and maybe the same IP if not too much trouble. This way the existing shortcut would continue to work with the new 2012R2 File Server. The UNC path represented in that shortcut is also configured into one or more of our major business applications,
futher emphasizing the need to keep the UNC path the same throughout the process.
3. The facility runs 24/7/365 but is "light" on weekends. The political environment is such that there is little to no tolerance for any down time at all.
4. Would DFS (based from the 2012R2 machine) be a good tool to get where I need to go?
Thanks for any suggestions.
Phillip Windell

Hi Sharon,
I've done some more reading and have a few new ideas to run past you....
Yes regular DFS wouldn't help and the Namespace would still be different than how it was with just the old server. However I was thinking DFS Replication could replace the purpose of RoboCopy and it would keep the two locations "in sync" until I was ready
to flip over to the new server. DFS Rep can exist independently of a DFS Namespace, so a Namespace is not even needed. It needs a minimum of 2003R2 for the "later & better" DFS Rep but I believe 2003 can do an "in place" upgrade to 2003R2, so I would upgrade
the old server to 2003R2 first. As long as the DFS Rep on 2012R2 and 2003R2 will properly interact I think that will work.
Thanks for the reg info on the Shares. I'm debating if editing that would reg file would really be much better than manually creating the Shares on the new server while the DFS Replication was doing its job. I'll probably export that Key as a
safety move whether I use it or not.
Once the DFS Rep is fully in sync and the Shares are in place on the new server, I figure I would then:
1. Remove the DFS Replication Object (optionally remove DFS Services completely)
2. Rename the old File Server to something else and set it to DHCP
3. Rename the new File Server to the name I want to use and give it the IP the old server had.
How does that sound?
Phillip Windell

HT1589 Can I use more than 1 device ie iPod and iPhone on the same iTunes account and have different music on them

Can I use more than 1 device ie iPod and iPhone on the same iTunes account and have different music on them

Yes. Use the option to sync with selected playlists on the music tab when your devices are connected.
tt2

IPhone 5 on iOS 7 , why when I call a friend who have another call , I don't see the word ( waiting ) on my screen . I asked a friend of mine and he have the same issue .

when I call a friend who have another call , I don't see the word ( waiting ) on my screen . I asked a friend of mine and he have the same issue .

That's not a feature of the iPhone. Or most other phones for that matter.

How can i sync my old ipod without knowing my old password and dont have the same email without loosing everything??

How can I sync my old Ipod without loosing everything? I dont remember my old password and dont have the same email. I have many pics stored on there of many trips we took over the years and songs as well please help...

What are you wanting to do exactly? Are you trying to sync this older iPod with a new/different iTunes library from the one you originally set it up with?
B-rock

Use one external harddrive on both pc and mac at the same time

i bought an iomega external harddrive today
can i use it on both mac and pc at the same times?
for ex:
when i plug in both computer
i could able to read and write on the hdd on both computer
since i format it into 4 partitions (2 journal and 2 doc)
so i wish i can use them separately in 2 computers

Hi Jerry_L and welocme to Discussions,
using such USB or Firewire connected external harddrives with two computers at the same time is usually not recommended by the manufacturer.
Doing so might lead to data-loss and the like.
Check with the manual of that harddisk to verify.
Using it with one computer at a time with your partitioning should be doable.
Regards
Stefan

How to place multiple images in batch with drop shadow effects on room backgrounds at the same position?

I want to place multiple images of hand paintings with drop shadow effects on room backgrounds to make them look as if the paintings are hanged on the room walls. I know how to do it one by one, but that takes time and I want to do it in batch at once.
I am quite a beginner for adobe photoshop CS6. I belive such an automated task is possible through 'Automated Batch' function and/or 'Create Droplet' function. Kindly share your expert opinion.

If you want to go with Batch I would recommend creating an Action of more or less these steps:
• set the resolution to the same as the background image’s
• change the image from Background Layer to regular Layer if necessary
• convert it to a Smart Object
• add a Drop Shadow Layer Style to the image (do not use Global Angle)
• place the background image (File > Place …)
• move it behind the image layer
• Image > Reveal All
• make Selection from that layer’s transparency (cmd-click its icon in the Layers Panel) and use Image > Crop
• select and transform the image layer to fit the intended position
This would naturally work out best if the images had the same size and proportions.
For the reflection on the floor duplicate the image, flip it vertically, move it in position and reduce its opacity to maybe 10%.
Realistically you may have to hide it partially behind the pillows, a Vector Mask would be an option.

Issue to send email (using sp_send_dbmail) with an attachement located in other server within the same network

I have two servers. One is for databases (DB) with the mail server configured and the other is for SSIS without mail server. Both servers are in the same network. On the SSIS server the SSIS package exports data from the DB server table
to xls file. The file is saved in SSIS server. When I created a task to send the email (using sp_send_dbmail) to attach that file, I got the error message:
Error: Executing the query "EXECUTE [msdb].[dbo].[sp_send_dbmail]
@profile_na..." failed with the following error: "Attachment file H:\test.xls is invalid.".
Any help will be appreciated. Thanks.
A Fan of SSIS, SSRS and SSAS

Where are you running this?
If its in the other server (DB) you need to use UNC path to the SSIS server folder where file resides
Also the executing account should have access to the folder as well as the file. So If you're running this from a job make sure you either provider folder and file access to sql agent job service account or create a separate proxy account with the required
permissions and configure the job to use the account
see
http://www.databasejournal.com/features/mssql/article.php/3789881/Proxy-Accounts-in-SQL-Server.htm
http://www.codeproject.com/Articles/28918/SQL-Server-Agent-Proxy
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Can I use a camera for application in Labview and VBAI at the same time ?

Dear all,
I'm trying to save an AVI file with Labview and make an image process with VBAI at the same time, in one machine.
The error : "Camera already in use" displayed.
My Camera is a GIGE and I work with Imaqdx. I've test the multicast mode but it only operate with several machines.
How can I do this ?
Thank's to help me,
Yoann B

I'm not necessarily saying that. It's been a while since I've used VBAI, so I don't remember all of the capabilities, but if VBAI can do the inspection and recording at the same time, you should be fine.
The trick is that only one program can access the camera at the same time. That application reserves the camera, thus making it unavailable to others.
Chris
Certified LabVIEW Architect
Certified TestStand Architect

Header and Trailer updating the same record

Hi all
I have a requirement in SQL loader in which the header should go to a header_trailer table. ( only 5 out of 10 columns are updated by the header record).
All the data records go to a second table.( some xyz table)
The trailer record should again update the record inserted by the header record in header_trailer table(the remaining 5 columns)
How can I do this
Each record in the header_trailer record will be identified by a sequence which should be populated when the header inserts the record
Thanks
Ashwin N.

You're in luck, I'm a bit bored so I wrote a little script. This is just one way of doing it. It makes sure you can run this code in parallel as much as you want. However, you do get a lot of control and log files, but there is no escaping that. If the parallel option is not a requirement there are easier solutions (e.g. using a function called in the control file to fetch the last batch number from the lb_hf table). That way the control file can remain static.
I also experienced some problems with the nummeric value in a definition variable. I solved it by turning it into a char and later in a number again, but this must be simpler. Anyways, this works and should suffice for your learning purposes:
Create 2 files. One called 'l.dat' with the following data in it:
a,b
c,dThe other file called 'l.sql' with the following script in it:
-- script to test loading data in staging area and create/update header table
define usr=scott
define pwd=tiger
define db=oracle
whenever sqlerror exit
conn &usr/&pwd@&db
whenever sqlerror continue
create table lb_stage (-- this is the staging table in which the data will be loaded
batch_num number,
c1 varchar2(30),
c2 varchar2(40));
create table lb_hf (-- this is the footer table
batch_num number,
load_start date,
description varchar2(30),
records_loaded number,
load_end date);
create sequence lb_hf_seq;
set verify off
-- fetch new sequence for this particular load
col hf_seq_nr format a30 new_value v_hf_seq_nr
select to_char(lb_hf_seq.nextval) hf_seq_nr from dual;
-- create header record
insert into lb_hf values (to_number('&v_hf_seq_nr'), sysdate, 'Automated load', null, null);
commit;
-- create control file (needed to hardcode the sequence number in)
set feedback off
spool l_&v_hf_seq_nr..ctl
prompt load DATA
prompt INTO TABLE lb_stage
prompt FIELDS TERMINATED BY ';' OPTIONALLY ENCLOSED BY '"'
prompt TRAILING NULLCOLS
prompt (
prompt batch_num char "&v_hf_seq_nr",
prompt c1,
prompt c2
prompt )
spool off
set feedback on
-- load data (also have batchnum in log file name)
host sqlldr &usr./&pwd.@&db. data=l.dat control=l_&v_hf_seq_nr..ctl log=l_&v_hf_seq_nr..log
-- update header record with load information
update lb_hf set records_loaded = (select count(1) from lb_stage where batch_num = &v_hf_seq_nr), load_end = sysdate where batch_num = &v_hf_seq_nr;
commit;
select * from lb_stage;
select * from lb_hf;
drop table lb_stage;
drop table lb_hf;
drop sequence lb_hf_seq;
prompt End of script.Change the login at the beginning to something appropriate and run l.sql from the sql prompt.
Hope this helps,
Lennert

HT1320 how to reset your ipod if it is stuck in an app and frozen at the same time?

My ipod is stuck in an app called openappmkt and when I click the home button notheing happens. I can click on things in the app but I can't exit the app.What sould I do?

Back up all data before proceeding. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Start up in Recovery mode. When the OS X Utilities screen appears, select Disk Utility.
In the Disk Utility window, select the icon of the startup volume from the list on the left. It will be nested below another disk icon, usually with the same name. Click the Unlock button in the toolbar. When prompted, enter the login password of a user authorized to unlock the volume, or the alternate decryption key that was generated when you activated FileVault.
Then, from the menu bar, select
File ▹ Turn Off Encryption
Enter the password again.
You can then restart as usual, if the system is working. Decryption will be completed in the background. It may take several hours, and during that time performance will be reduced.
If you can't turn off encryption in Disk Utility because the menu item is grayed out, you'll have to erase the volume and then restore the data from a backup. Select the Erase tab, and then select
Mac OS Extended (Journaled)
from the Format menu.
You can then quit to be returned to the main Recovery screen. Follow these instructions if you back up with Time Machine. If you use other backup software, follow its developer's instructions.
Don't erase the volume unless you have at least two complete, independent backups. One is not enough to be safe.

How to record you screen using quicktime with built in input line and microphone in the same recording?

Similar Messages

Maybe you are looking for