How to recover 10.6 after getting mangled by CoreAudio
hi- about two days ago i experienced a sever system crash- i was trying to install the CoreAudio drivers to use Virtual DJ and messed up most of OS X. i could boot properly but almost nothing worked, including iTunes, FInder, Chrome, Safari, and so on. i tried debugging for a while (deleting the drivers, reinstalling chrome, running disc utility, running onyx, so on) with no results so i reinstalled osx and that has brought be this far. at this point most of the system has recovered except for two (maybe three) things. one is that disc utility still shows inconsistencies in the permissions of many of my system files. it also fails to fix any of them. onyx does the same. also my internet protocols have been effected. chrome has become unusable to a cue- crashing pretty consistantly and demonstrating this unstability. safari doesnt even load my homepage without freezing, forcing me to force close it. skype is also very unstable, and firefox does not run either.
if anyone knows how to recover 10.6 after getting mangled by CoreAudio, please help. tnx.
Ignore the disk utility repair permissions. Stuff is always reported. Scan over this.
The fact that your internet related apps aren't working implies that you should look at your network system preferences. Are you using ethernet or wireless? Are you using default DNS servers or something like the OpenDNS servers (208.67.222.222, 208.67.220.220)? DHCP? Is there a green dot next to the connection type you are using?
Similar Messages
-
How to recover purchased ringtones after wiping phone and laptop
How to recover purchased ringtones after wiping phone and laptop
From your computer backup.
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not all media formats are available in all countries (see: iTunes in the Cloud, iTunes Match, and iTunes Radio availability by country - http://support.apple.com/kb/HT5085); apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list (e.g., ringtones, audiobooks), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple recommends, "... back up your iTunes library. " (http://support.apple.com/kb/ht2519). -
How to recover my database after lose some archivelogs?
How to recover my database after lose some archivelogs?
What should I do next?
When I make a point-in-time recovery, I get the following message:
Oracle Error:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/u01/app/oracle/oradata/rcatalog/system01.dbf'
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 09/25/2008 16:41:19
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of log thread 1 seq 17 lowscn 798237 found to restore
RMAN-06025: no backup of log thread 1 seq 16 lowscn 796977 found to restore
RMAN-06025: no backup of log thread 1 seq 15 lowscn 781378 found to restore
RMAN-06025: no backup of log thread 1 seq 14 lowscn 759019 found to restore
RMAN-06025: no backup of log thread 1 seq 13 lowscn 709039 found to restore
RMAN-06025: no backup of log thread 1 seq 12 lowscn 708479 found to restore
RMAN-06025: no backup of log thread 1 seq 11 lowscn 676234 found to restore
RMAN-06025: no backup of log thread 1 seq 10 lowscn 646686 found to restore
RMAN-06025: no backup of log thread 1 seq 9 lowscn 645207 found to restore
RMAN-06025: no backup of log thread 1 seq 8 lowscn 645199 found to restore
RMAN-06025: no backup of log thread 1 seq 7 lowscn 595363 found to restore
RMAN-06025: no backup of log thread 1 seq 6 lowscn 557197 found to restore
RMAN-06025: no backup of log thread 1 seq 5 lowscn 519102 found to restore
RMAN-06025: no backup of log thread 1 seq 4 lowscn 519053 found to restore
RMAN-06025: no backup of log thread 1 seq 3 lowscn 492824 found to restore
RMAN-06025: no backup of log thread 1 seq 2 lowscn 476888 found to restoreMixing thread
yours recovery asking a lot of archivelog ,you are in the situation now like you are in no archive mode recovery..which requires last cold backup.
What you can do is restore yours old backup with its old controlfile and then recover till before that miissing log by using recover database using backup controlfile.
Khurram -
How to recover apps purchased after macbook was re-registered to
How to recover apps purchased after macbook was given and re-registered to another family member/
Contact the App Store support and indicate to them your intent. They can tell you if your license to those applications will allow you to do so.
-
How to recover my contacts after restore my iphone
how to recover my contacts after restore my iphone
Sync with new computer (new operating system)
https://discussions.apple.com/docs/DOC-3141 -
How to fin the Workcenter after getting Task list type
Hi all ,
I got the fields PLNTY(Task List Type ) , PLNNR(Key for Task List Group) , ZAEHL(Internal counter ) and VORNR (Operation/Activity Number) from PLPO table .
I need to get the work centers names . I saw the work centers are in CRHD table .
May i know how to get the name of the work centers after getting the task list type details .
I found the routing details of a give finished/semi finished material .
my next step is to find the work centers.
Any suggetions from you are appreciated .
Regards
RajHi Jan,
Yes, sa38 makes it possible indeed to execute in background into immediate mode a job but
the user have to know the name of the program to be carried out ...
The user knows only the name of these transactions trade. For example, IW38.
In the menu of this transaction, SAP gives the possibility to execute in background :
Program --> Execute in Background --> display of Start Time screen for the type of start condition :
Immediate, Date/Time, After job, After event, or At operation mode).
It is at this time there that we want that the user can only choose the "immediate" mode.
We must thus prohibit the other choices (Date/Time, After job, After event, or At operation mode) ... and
and we don't know how to restrict these other options in this screen "Start Time screen for the type of start condition".
Thank you.
By. -
Hi - I have reformatted my computer and want to know how to recover my tunes that were on itunes - I have tried to transfer the tunes from my ipod but it has wiped this clean too - any suggestions welcome!!
*If my kids dock up their iPods to charge them (the iPods still have the music on them) will the computer "sync" the iPod to the now empty library that's on the computer?*
If the iPods are set to update automatically you need to take care connecting to an empty iTunes. You can use a keyboard command to prevent an iPod auto-syncing with iTunes. While connecting the iPod to the computer on a Mac hold down the Option and Command (⌥ and ⌘ Apple) keys together. This will stop the iPod from auto-syncing with iTunes and it will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer. You should then be able to change your settings: iTunes for Mac - Keyboard Shortcuts
Once the iPods are connected it might be a good idea to change them to manual updating at least until you have your library back in shape. The content of iTunes and the iPod are not syncronised in this mode so the two can be different, you can get details here:
Managing content manually on iPod
iPod - Syncing Music
Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod -
How to recover purchased apps after changing an Apple ID?
So I changed my apple id because my current email address is not working anymore on Yahoo. The next day when I checked for some updated on my apps, I found out that my deleted apps under "Not on this iPod" button are missing! And so I checked the store for my recent purchase and it has price. So it means I have to pay for them again to download! Anyone please help me how to recover them all!
Despite the fact that your old email doesn't work doesn't work anymore, the Apple ID still does. Log out and back in again with the old ID and downlload the apps. When finished, log out/in again to get back to your new ID.
These apps should sync to iTunes on your computer. If they do not, do the same log out/in in iTunes to retrieve the apps and store them on your computer.
The Sync function is totally independent of which ID was used to obtain the apps, music, movies, etc. The only time that you will care is when you need to update the app. If you choose to do it from iTunes, you must again log out/in to update. However, the iPod handles that for you and all you'll need is the correct password. -
How to recover the workflow after dead line is missed
Dear friends,
my work item missed requested end date as well as latest end date. I see it in
transaction SWI2_DEAD. Is there way how to recover the work item or prolonge
the dead lines?
Thanks for you help.
Regards,
Petr.Hi Petr,
Could you please explain in a little more detail, what exactly you mean by "recover"?
Nothing actually happens to the work item, unless you have designed the workflow with modelled deadlines in such a way that it cancels the item and perform some or other action. Simple deadlines don't do anything to the work item, they just send out a notification and the work item remains where it is.
If on the other hand you have a modelled deadline which cancels the item and generates a new one, then there is no way to "recover" other than starting a new workflow.
Cheers,
Mike -
How to recover audiobook bookmarks after upgrade to iOS 7?
I just upgraded my iPhone 5 to iOS 7 and here's one of the issues that this brought up:
I used to listen to audiobooks in the built-in Music app and the app would show the bookmarks or a time-code where I left off listening to my audiobooks and begin playing from that same spot even if I switched to listen to something else in the meantime. I'm concerned now because after this upgrade it doesn't show my bookmarks anymore.
How do I get them back?Had you backed up the phone via iTunes or iCloud? If so, the backup includes audio book bookmark in the iCloud and you will be able to restore that backup to a replacement iPhone.
If you had been syncing your phone to back it up, you can use 3rd party software like iPhone Bookmark Recovery to try to recover some of your data from your backup. However, if your audio books are not fully included in the backup (they are only backed up as necessary to maintain call favorites and recent call lists). This article will show what's included in the backup: http://support.apple.com/kb/HT4946. -
HT201250 How to recover iPhoto Library after format of hard drive?
I've recently reinstalled Lion onto my hard drive but I forgot to backup my iPhoto library. Is there any way of recovering this library? I also have an external hard drive that had Time Machine Backups but that hard drive has since gone through formats as well. Any help will be greatly appreciated. Thank you
SOLUTION : iPhoto folder recovered after formatting hard drive by mistake.
I was able for recover my iPhoto library ( intact ) after formatting the hard drive by mistake.
On top of that I formatted it in FAT32 format. My iPhoto folder was huge 100GB with file and movies of all sort of formats. I kept it on a secondary hard drive of 500 GB. one day I was formatting flash drive for somebody which was 500Mb, seems similar to my 500GB and I formatted my hard drive by mistake. I realized the mistake a week after the person called me and said there is nothing in flash disk and I find a single file on my hard drive. Needless to say the earth disappeared underneath me. All my pictures for 10 years , 8000 thousand of them, cherished memories all gone. But was I determined to find them back and I know they are intact somewhere. My biggest fear was that formatting on MS-dos format might have really deleted them , but they were there. and here is how I got them back.
First I tried the Data recuse 3 software. I got the photos back, but they were all jumbled up. Long numerical file names and original dates were gone. No way I could sort it out back to the way it was before . So my target was to recover the iPhoto folder intact.
- I bought an external hard drive with 1tb space to retrieve the data.
- The software which did the miraculous job is called " STELLAR PHOENIX MAC DATA RECOVERY" .
- I ran a deep scan all night and came up with many volumes. volume-1 was the MS dos , volume 2 was a mac system,
- I tried MS dos volume first and there was nothing on it.
- I tried the 2 volume with mac system. It got all my files and some other system file.
- I could see the iPhoto folder and click on that only to recover. After that I went for my doc and other files later.
- It took hours to retrieve my iPhoto folder intact, The folder size was right and file were there in master folder.
- I checked in FINDER , opening iPhoto with "show content " and all my picture file were there with original date.
- BUT when tried opening it in iPhoto , there was nothing. it keep showing the wait icon and nothing shows up. Empty iPhoto.
- I tired starting iPhoto , holding command -option and tried building and repairing database, nothing worked.
- Then I got this software " iPhoto library manager" .
- downloaded, installed it and pointed it towards my iPhoto folder.
- It asked for space to rebuild a new iPhoto library with existing picture and folder.
I had another external hard drive , I used it to make a rebuild iPhoto library.
and there I GOT IT. only took three night of pain.
IMPORTANT:
I never touched my original formatted hard drive. Don't write anything on it until you are sure you have recovered everything. open and see files with your own eyes.
- I recovered the iPhoto on another hard drive and then built it on another hard drive . Yes its pain in the neck but well worth fixing your stupid mistake of not making a back up in the first place.
I hope this helps all who are looking for iPhoto recovery and their lovely memories. -
How to recover database SYSTEM datafile get corrupt ?
Database is in ARCHIVELOG mode, and the datafile belonging to SYSTEM tablespace gets corrupted. Up to what point can I recover the database ?
A. Until last commit.
B. Until the time you perform recovery.
C. Until the time the datafile got corrupted.
D. You cannot recover the SYSTEM tablespace and you must be re-create the database.
and 1 more doubt :
If redologfiles are not multiplexed and redolog blocks get corrupt in group 2, and archiving stops. All redolog files are filled and database activity is halted.
DBWR has written everything to disk. What command can be used to proceed further ?
A. recover logfile block group 2;
B. alter database drop logfile group 2;
C. alter database clear logfile group 2;
D. alter database recover logfile group 2;
E. alter database clear unarchived lofile group 2;
Edited by: user642367 on Sep 18, 2008 8:45 PM1. A. Since the DB is in archivelog mode, so you can always restore and recover the whole DB including system tablespace datafile till last SCN generated provided the redo record is available in archive/online logfiles.
2. E. Since only redolog is corrupted so archiver won't proceed and hence a db hang is obvious, So, in order to proceed further you need to clear online (un archived log file) and then db will work as usual. Care should be taken that you must take a full backkup of DB(cold backup wherever feasible) as soon as possible after issuing this command. As now you don't have redo info in archivelog files to recover the db in case of a crash.
Please go through Oracle 10g DB Administrators guide (available on OTN) for more details.
Thanks -
MacBook Pro OSX 10.9.1 How to recover hidden files after crash?
After a crash of the HDD, the MBP needs to be reformatted. I've managed to transfer all the files to another mac (using 'T' while booting the MacBook Pro). Because I want to keep al my e-mails, I need to reach the hidden library. But in the transferred files, I can't find this hidden library. How can I get it to show up, so I can copy the Thunderbird file which contains all of the e-mails?
Please, I'm desperate!Hi,
At least i'd like to try to reinstall OSX to the same HDD. It seems to be a software problem that occured after a check-up with DiscHelp (idk the specific term in english because I use the dutch version). While 'repairing' an error, a notification came up that said that it couldn't be repaired and that I had to back-up all of my files and reformat the HDD. Since then, if i try to boot up the system, the screen goes black in about 30 seconds.
The only backup I have is the direct copy I made booting up the MBP while pressing 'T' (while connected to another mac using a thunderbolt cable). So now I have a copy of the whole HDD. I tried to find the hidden ~library but i couldn't find it. In this library there are certain files i need to transfer the profile of my email. So yeah it's still readable, but as an external HDD, unfortunately not as a computer.
I really hope you can help me!
Rick -
How to recover "home-preserved" after OS X Update
Hello all together,
after upgrading from "Lion" to "Mountain Lion" my "/home" folder is cleaned and the former content moved to the (hidden) folder "/home-preserved". Since I would like to get all my files, Safari-bookmarks, developer certificates etc.back here is my question: Can I just move the contents from "/home-preserved" back to "/home" and everything will be fine? How can I get back all my "private keys/certificates etc."?
(I made a time-machine backup prior to upgrading but I thought I would not loose everything...)
thanks for listeningSince I had a time-machine backup I tried it on my own and fixed it. Here is what I did:
1) Terminal commands:
defaults write com.apple.Finder AppleShowAllFiles YES
killall Finder
to show the "/home-preserved" folder in the finder.
2) Renamed the folder "/home" to "/home-bak"
3) Renamed the folder "/home-preserved" to "/home"
4) Changed the attributes of the (new) "/home" folder to "read & write" (right Mousebutton -> Information)
5) Terminal command (from the root):
chflags nohidden home
to permanently show the (new) "/home" folder.
6) Restart OS X
Everything is back, even my certificates, yeeeehaaaa! -
How to recover encrypted folder after formatting PC ?
Hello,
My problem is the following: I've encrypted a folder and put it in an external HD. Later the PC was formatted so that the original user which I used to encrypt the folder was lost and now I can't access the folder in my external HD anymore.
How can I recover this folder's content?
Thank you!Hi Tavaresv,
Have you tried to export the keys to an external media when you encrypted the folders with the Encrypted File System ?
Usually we will get a chance to export the keys when we encrypted the folders and it is saved as a .pfx format file.
If you have exported it ,you just need to import it by double clicking it and you will have access to the folder again .If you haven`t exported the certificate and key .I am afraid you will lose the encrypted data forever.
Best regards
Maybe you are looking for
-
Just as the post said, I have a user that frequently combines PDFs. When she tries to combine documents, it crashes, although it does save the new document. The crash takes away from her productivity and she isn't pleased as this was also happening w
-
JSpinner problems with alignment of text
I experience problems with the alignment of the text within the spinner. I read a few topics on this forum. Many answers point to the solution of grabbing the JFormattedTextField from the spinner and call the setHorizontalAlignment(int) method. Seems
-
Is it possible to create a PO with ref to an Material document ? Thanks Nick
-
Hi, i have some issues running a dll in a .VI. to be more specific... I am running a main VI, and that main VI calls for a .dll when it is running labview crashes. after that y tried another way, I made the main VI a .dll then when i ran it everythin
-
Hi all, yesterday night I decided to moving (not coping) about 100 Gb of data (two WMWare virtual images of Windows XP) from an external USB disk to my internal hard disk. The process starts and I see it will takes about 3 hours. I decide to stop the